Professional Documents
Culture Documents
Page: 1/11
BASF Safety data sheet according to UN GHS 4th rev.
Date / Revised: 25.11.2022 Version: 3.0
Product: Elastofoam® I 4610/110 polyol component
(ID no. 30183182/SDS_GEN_00/EN)
Date of print 08.03.2024
1. Identification
Product identifier
Company:
BASF SE
67056 Ludwigshafen
GERMANY
2. Hazards Identification
Label elements
The product does not require a hazard warning label in accordance with GHS criteria.
Page: 2/11
Safety data sheet according to UN GHS 4th rev.
Date / Revised: 25.11.2022 Version: 3.0
Product: Elastofoam® I 4610/110 polyol component
(ID no. 30183182/SDS_GEN_00/EN)
Date of print 08.03.2024
Other hazards
3. Composition/Information on Ingredients
Substances
Not applicable
Mixtures
Chemical nature
Butane-1,4-diol
Content (W/W): < 20 % Acute Tox. 4 (oral)
CAS Number: 110-63-4 STOT SE 3 (drowsiness and dizziness)
EC-Number: 203-786-5 H302, H336
N,N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine)
Content (W/W): >= 0,1 % - < 1 % Flam. Liq. 4
CAS Number: 3033-62-3 Acute Tox. 4 (oral)
EC-Number: 221-220-5 Acute Tox. 4 (Inhalation - mist)
REACH registration number: 01- Acute Tox. 3 (dermal)
2119972935-21 Skin Corr./Irrit. 1B
Eye Dam./Irrit. 1
Aquatic Acute 3
H227, H311, H314, H302 + H332, H402
EUH071
For the classifications not written out in full in this section the full text can be found in section 16.
4. First-Aid Measures
Description of first aid measures
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air.
On skin contact:
Page: 3/11
Safety data sheet according to UN GHS 4th rev.
Date / Revised: 25.11.2022 Version: 3.0
Product: Elastofoam® I 4610/110 polyol component
(ID no. 30183182/SDS_GEN_00/EN)
Date of print 08.03.2024
Wash thoroughly with soap and water
On ingestion:
Rinse mouth and then drink 200-300 ml of water.
5. Fire-Fighting Measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, foam, carbon dioxide
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Environmental precautions
Do not empty into drains. Do not discharge into the subsoil/soil.
Ensure thorough ventilation of stores and work areas. Protect against moisture.
Suitable materials for containers: Carbon steel (Iron), High density polyethylene (HDPE), Low
density polyethylene (LDPE), tinned carbon steel (Tinplate), Stainless steel 1.4301 (V2)
Further information on storage conditions: Keep container tightly closed.
Storage stability:
Protect against moisture.
110-63-4: Butane-1,4-diol
Exposure controls
Personal protective equipment
Respiratory protection:
Respiratory protection in case of vapour/aerosol release. (Combination filter EN 14387 A-P2)
Hand protection:
Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to
EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case
of dust).
Form: liquid
Colour: black
Odour: amine-like
Odour threshold:
not applicable
pH value: approx. 6 - 8
(20 °C)
solidification temperature: < 0 °C
Boiling point: > 140 °C
Flash point: 141 °C (ISO 3679)
156 °C (ISO 2592)
Evaporation rate:
Value can be approximated from
Henry's Law Constant or vapor
pressure.
Flammability: not flammable (derived from flash point)
Lower explosion limit:
For liquids not relevant for
classification and labelling., The
lower explosion point may be 5 - 15
°C below the flash point.
Upper explosion limit:
For liquids not relevant for
classification and labelling.
Ignition temperature: > 250 °C
Vapour pressure: < 10 mbar
(20 °C)
Density: 1,02 g/cm3 (DIN 51757)
(20 °C)
Relative density: 1,02
(20 °C)
Relative vapour density (air):
not applicable
Solubility in water: partly soluble
Partitioning coefficient n-octanol/water (log Kow):
not applicable for mixtures, Study
scientifically not justified.
Self ignition: not self-igniting
Other information
Chemical stability
The product is chemically stable.
Peroxides: The product does not contain peroxides. The product/the substance has
not a tendency towards the formation of peroxide.
Conditions to avoid
Temperature: < 0 °C
See SDS section 7 - Handling and storage.
Incompatible materials
Substances to avoid:
acids, oxidizing agents, isocyanates
:
No hazardous decomposition products if stored and handled as prescribed/indicated.
Page: 7/11
Safety data sheet according to UN GHS 4th rev.
Date / Revised: 25.11.2022 Version: 3.0
Product: Elastofoam® I 4610/110 polyol component
(ID no. 30183182/SDS_GEN_00/EN)
Date of print 08.03.2024
11. Toxicological Information
Information on toxicological effects
Acute toxicity
Irritation
Respiratory/Skin sensitization
Assessment of sensitization:
The chemical structure does not suggest a sensitizing effect.
Assessment of mutagenicity:
The chemical structure does not suggest a specific alert for such an effect.
Carcinogenicity
Assessment of carcinogenicity:
The chemical structure does not suggest a specific alert for such an effect.
Reproductive toxicity
Developmental toxicity
Assessment of teratogenicity:
The chemical structure does not suggest a specific alert for such an effect.
Repeated dose toxicity and Specific target organ toxicity (repeated exposure)
The product has not been tested. The statement has been derived from substances/products of a
similar structure or composition.
Elimination information:
Poorly biodegradable.
Bioaccumulative potential
Mobility in soil
According to Annex XIII of Regulation (EC) No.1907/2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH): The product does not contain a substance
fulfilling the PBT (persistent/bioaccumulative/toxic) criteria.
The product does not contain substances that are listed in Regulation (EC) 1005/2009 on
substances that deplete the ozone layer.
Additional information
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for
recycling after being thoroughly cleaned.
Land transport
ADR
Not classified as a dangerous good under transport regulations
UN number or ID number: Not applicable
UN proper shipping name: Not applicable
Transport hazard class(es): Not applicable
Packing group: Not applicable
Environmental hazards: Not applicable
Special precautions for None known
user
RID
Not classified as a dangerous good under transport regulations
UN number or ID number: Not applicable
UN proper shipping name: Not applicable
Transport hazard class(es): Not applicable
Packing group: Not applicable
Environmental hazards: Not applicable
Special precautions for None known
user
Sea transport
IMDG
Not classified as a dangerous good under transport regulations
UN number or ID number: Not applicable
UN proper shipping name: Not applicable
Transport hazard class(es): Not applicable
Packing group: Not applicable
Environmental hazards: Not applicable
Special precautions for None known
user
Air transport
IATA/ICAO
Not classified as a dangerous good under transport regulations
UN number or ID number Not applicable
UN proper shipping name: Not applicable
Transport hazard class(es): Not applicable
Packing group: Not applicable
Environmental hazards: Not applicable
Special precautions for None known
user
If it is intended to use materials for the manufacture of consumer goods (e. g. products which will
come into contact with foodstuffs or with the skin, toys) or medical products, national and
international regulations have to be observed. Where no regulations exist, consumer goods or
medical products must at least comply with European legislation. We recommend contacting our
Sales and our Product Safety departments.
If other regulatory information applies that is not already provided elsewhere in this safety data
sheet, then it is described in this subsection.
Page: 11/11
Safety data sheet according to UN GHS 4th rev.
Date / Revised: 25.11.2022 Version: 3.0
Product: Elastofoam® I 4610/110 polyol component
(ID no. 30183182/SDS_GEN_00/EN)
Date of print 08.03.2024
16. Other Information
For the classification of the mixture the following methods have been applied: extrapolation on the
concentration levels of the hazardous substances, on basis of test results and after evaluation of
experts.
The methodologies used are mentioned at the respective test results.
Full text of classifications, hazard symbols and hazard statements, if mentioned in section 2 or 3:
Acute Tox. Acute toxicity
STOT SE Specific target organ toxicity — single exposure
Flam. Liq. Flammable liquids
Skin Corr./Irrit. Skin corrosion/irritation
Eye Dam./Irrit. Serious eye damage/eye irritation
Aquatic Acute Hazardous to the aquatic environment - acute
H302 Harmful if swallowed.
H336 May cause drowsiness or dizziness.
H227 Combustible liquid.
H311 Toxic in contact with skin.
H314 Causes severe skin burns and eye damage.
H302 + H332 Harmful if swallowed or if inhaled
H402 Harmful to aquatic life.
EUH071 Corrosive to the respiratory tract.
The data contained in this safety data sheet are based on our current knowledge and experience and
describe the product only with regard to safety requirements. This safety data sheet is neither a
Certificate of Analysis (CoA) nor technical data sheet and shall not be mistaken for a specification
agreement. Identified uses in this safety data sheet do neither represent an agreement on the
corresponding contractual quality of the substance/mixture nor a contractually designated use. It is the
responsibility of the recipient of the product to ensure any proprietary rights and existing laws and
legislation are observed.
Vertical lines in the left hand margin indicate an amendment from the previous version.