Professional Documents
Culture Documents
3DT179
Cooling Water Corrosion Inhibitor
Product Bulletin
3D TRASAR products are part of an innovative water treatment program that uses proven technology to
prevent operational problems. 3D TRASAR technology compensates for both routine and special causes
of system variation. 3D TRASAR programs provide a return on your investment through their unique
control and diagnostic capabilities.
3D TRASAR 3DT179 is a dual-function phosphonate inhibitor for both cathodic corrosion and calcium
carbonate scale in open recirculating and once-through cooling systems. The active material is a
patented, proprietary chemical called Phosphinosuccinic Oligomer (PSO). When used in conjunction with
the anodic (pitting) inhibitor, the orthophosphate anion, PSO provides a superior alternative to traditional
cooling water inhibitor blends containing pyrophosphate, orthophosphate, zinc, molybdate, etc. A
differentiating property of 3D TRASAR 3DT179 is its hydrolytic stability and resistance to degradation in
the presence of oxidizing biocides. The product is used as one part of an integrated 3D TRASAR
program for cooling water systems.
3D TRASAR 3DT179 is recommended for systems where it is feasible to feed multiple components of a
complete corrosion, scale and fouling program. For open recirculating systems, 3D TRASAR 3DT179
should be combined with some or all of the following:
These properties are typical. Refer to the Safety Data Sheet (SDS) for the most current data.
Form Liquid
Density 10.5 lb/gal
Specific Gravity at 77oF (25oC) 1.26
pH (neat) 3.9
Freeze-Thaw Recovery Complete
Flash Point Not Applicable
Odor None
Freeze Point 19oF (-8oC)
Solubility in Water Complete
Appearance Light Yellow
ACTIVE CONSTITUENTS
Active Function
Phosphinosuccinic Oligomer (PSO) Mild steel corrosion and CaCO3 scale inhibition
REGULATORY APPROVALS
Refer to the Safety Data Sheet (SDS) for the most recent information on approvals.
MATERIALS OF COMPATIBILITY
For complete dosage and feeding recommendations, consult your Nalco sales engineer.
Refer to the Safety Data Sheet (SDS) for all available mammalian and aquatic toxicity information.
3D TRASAR 3DT179 is an acidic product and may cause skin and eye irritation. Chemical-resistant
gloves and safety goggles should be worn when handling 3D TRASAR 3DT179. Read Safety Data
Sheet for specific personal protective equipment (PPE) recommendations and health effects information.
STORAGE
Store 3D TRASAR 3DT179 in a location where the product temperature can be maintained between 22oF
(-6oC) and 110oF (43oC). In cold climates, heat tracing and insulation of exposed containers and transfer
lines may be necessary.
The recommended in-plant storage limit for 3D TRASAR 3DT179 is six months. Refer to the Safety Data
Sheet (SDS), for the most current data.
REMARKS
If you need assistance or more information on this product, please call your nearest Nalco
Representative.
For more news about Nalco Company, visit our website www.nalco.com
For Medical and Transportation Emergencies involving Nalco products, please see the Material Safety
Data Sheet for the phone number.
ADDITIONAL INFORMATION
TRASAR, 3D TRASAR, PORTA-FEED, NALCO and the logo are registered trademarks of Ecolab USA Inc. (3-31-
2014)