Professional Documents
Culture Documents
PRACTICAL FILE
SESSION:2024-2025
1 | Page
EXPERIMENT-1A
OBJECTIVE:-
1(a). Write the MATLAB code to draw a 5X5 identity matrix and
zero matrix.
Software used :- MATLAB
Code :-
Output:-
Conclusion: -
From this experiment we have learnt that, how to create a matrix and its
various types.
4 | Page
EXPERIMENT-1B
OBJECTIVE:-
1(b).
Output:-
Conclusion: -
From this experiment we have learnt that,
How to write a mathematical equation and solve it using MATLAB.
5 | Page
EXPERIMENT-1C
OBJECTIVE:-
1(c).
Output:-
6 | Page
Conclusion: - We have learnt about the function of matrix,
printing specific row and column.
7 | Page
EXPERIMENT-1D
OBJECTIVE:-
1(d).
Output:-
8 | Page
EXPERIMENT 2A
CODE:
9 | Page
OUTPUT:
Conclusion: - From this experiment we have learnt that, how to plot a graph and
use subplot function and also how to define x label and y label function.
7 | 10
P a|g Pe a g e
EXPERIMENT 2B
10 | P a g e
CODE:
11 | P a g e
Conclusion: From this experiment we have learnt that, how to use
linspace function and plot 3D curves using mesh and meshgrid
functions.
12 | P a g e
EXPERIMENT-3(A)
OBJECTIVE:-
solve the ordinary differential equation:
dydt= (t^3-(2*y))/t, 1<=t<=3 with y=4.2 at t=1.
Software used :- MATLAB
Code :-
Output:-
RITIK JAIN
15 | P a g e
Output: -
17 | P a g e
EXPERIMENT-5(A)
OBJECTIVE:
5(a).
Output:-
18 | P a g e
EXPERIMENT-5(B)
OBJECTIVE:
5(b).
Code: -
19 | P a g e
Output:-
RITIK JAIN 2022UIC3603
20 | P a g e
EXPERIMENT-5(C)
OBJECTIVE:
5(c).
Code: -
21 | P a g e
Output:-
RITIK JAIN 2022UIC3603
22 | P a g e
EXPERIMENT-5(D)
OBJECTIVE:
5(d).
Code: -
23 | P a g e
Output:-
RITIK JAIN 2022UIC3603
24 | P a g e
EXPERIMENT-6
OBJECTIVE: -
6.Plot the output response of following circuit:-
25 | P a g e
Output:-
26 | P a g e
EXPERIMENT-7(A)
OBJECTIVE: -
7(a). To Develop a Simulink Model for The Half Wave Rectifier and
Plot Output and Input Voltage, Current, Diode Voltage, Rms
Voltage and Average Voltage.
Software used: - MATLAB
Theory: - Half-wave rectifiers transform AC voltage to DC voltage.
A halfwave rectifier circuit uses only one diode for the transformation.
It is defined as a type of rectifier that allows only one-half cycle of an
AC voltage waveform to pass while blocking the other half cycle.
Circuit: -
27 I P a g e
Output: -
RITIK JAIN 2022UIC3603
28 I P a g e
EXPERIMENT-7(B)
OBJECTIVE: -
7(b). To Develop a Simulink Model for the full Wave Bridge Rectifier
and Plot Output and Input Voltage, Current, Diode Voltage, Rms
Voltage and Average Voltage.
Software used: - MATLAB
Theory: - A semiconductor device that is used to change the complete
AC cycle into pulsating DC is known as a full-wave rectifier. This
circuit uses the full wave of the I/p AC signal whereas the half-wave
rectifier uses the half-wave. This circuit is mainly used to overcome the
drawback of half- wave rectifiers like low-efficiency drawback.
Circuit: -
RITIK JAIN 2022UIC3603
29 I P a g e
Output: -
30 I P a g e