Professional Documents
Culture Documents
Valvula Mezclador Polvos
Valvula Mezclador Polvos
• 1/2 through 515 cubic feet capacity • Wetted parts of carbon steel, stainless steel type 316 and
special alloys
• Stainless steel wetted parts
• Continuous ribbon agitator for end discharge, interrupted
• Ribbon agitator for center discharge ribbon for higher density materials, paddles for full or
partial loads
• Designed for atmospheric operation
• Vacuum or pressure construction
• 80 grit finish on interior and exterior stainless steel
surfaces • Sanitary type construction
• Two piece covers from 10 to 515 cu. ft. for charging of • Cover openings as required
raw materials with neoprene gaskets
• Spherical, Flush Type Ball and paddle discharge valves
• Safety limit switches to prevent operation when covers
are raised • Horsepower to suit higher density materials
• Stuffing boxes with easily disassembled split housing • Explosion-proof or washdown motors and controls
• Teflon braided packing • Controls such as inverters, motor starters, and operator
stations are available
• Manually operated knife gate discharge valve
• Electronic or mechanical soft start control systems
• All exterior non-stainless surfaces are painted with a white
two-part epoxy coating • Spray nozzles for liquid introduction
• 230/460 volt, 60 Hz, three phase, TEFC motors • Dimpled or baffled jackets for heating or cooling
(see options for starters and controls)
• Thermocouples for temperature readout
• Blender is mounted on supports providing a discharge
clearance of 36" • Special gasket materials such as Viton are available
• Blender suitable for 50 lbs. per cu. ft. • Lantern rings for stuffing boxes
Standard Slide Paddle Optional Slide Gate Valve – Optional Ball Valve – For Optional Flush Plug Valve – Optional Spherical Valve – Optional Slide Knife Gate
Valve available for manual ideal for dust-tight, liquid- vacuum/pressure blending equipped for manual or pneumatically operated, Valve – manually operated.
or pneumatic operation. tight, or vacuum-tight or liquid/ solid blending. pneumatic operation, the Flush this valve minimizes dead
operation. Plug Valve eliminates dead spots space and provides a large
in the Ribbon Blender trough. discharge opening.
Model Working Capacity Full Capacity Motor Agitator Trough Size Overall Dimension Shipping
Number Cu. Ft. Gal. Cu. Ft. Gal. HP RPM Width Length Depth A B C Wt. Lbs.