Professional Documents
Culture Documents
to shipment. This testing must show that the galvanized nut with the lubricant
provided may be rotated from the snug-tight condition well in excess of the
rotation required for pretensioned installation without stripping. This requirement
applies to both hot-dip and mechanically galvanized fasteners. The above
requirements clearly indicate that:
Notes:
1. XYZ represents the manufacturer’s identification mark.
2. ASTM F1852 twist-off-type tension-control bolt assemblies are
also produced with heavy-hex head that has similar markings.
Figure C-2.1. Required marks for acceptable bolt and nut assemblies.