Professional Documents
Culture Documents
Juniper
Exam Questions JN0-104
Junos - Associate (JNCIA-Junos)
NEW QUESTION 1
- (Exam Topic 1)
A user has entered the sequence of commands shown in the exhibit
At which level of the configuration hierarchy would the user be after typing the exit command?
A. [edit]
B. [edit interfaces ge-0/0/0]
C. [edit interfaces ge-0/0/0 unit 01 ]
D. [edit interfaces]
Answer: C
NEW QUESTION 2
- (Exam Topic 1)
Click the Exhibit button
What is the next-hop interface for traffic destined to 172.19.52.101 as shown in the exhibit?
A. ge-0/0/3.0
B. ge-0/0/0.0
C. ge-0/0/2.0
D. ge-0/0/1.0
Answer: D
NEW QUESTION 3
- (Exam Topic 1)
Which statement is true about a virtual router routing instance?
Answer: B
NEW QUESTION 4
- (Exam Topic 1)
Which statement about the forwarding table is correct?
Answer: B
NEW QUESTION 5
- (Exam Topic 1)
You just received a new factory-default Junos device.
Which two steps must be completed to connect and log in to the device? (Choose two.)
Answer: BC
NEW QUESTION 6
- (Exam Topic 1)
Click the Exhibit button
Answer: D
NEW QUESTION 7
- (Exam Topic 1)
Which statement is true about using custom login class permissions?
A. If you allow and deny the same command, the command is allowed_
B. If you allow and deny the same command, the command is denied.
C. If you allow and deny the same command, Junos OS will randomly choose the action
D. If you allow and deny the same command, the Junos OS will fail the commit check.
Answer: B
NEW QUESTION 8
- (Exam Topic 1)
You want to temporarily apply a candidate configuration to the active configuration and automatically roll back after 10 minutes
In this scenario, which command will accomplish this task?
A. commit at
B. commit confirmed
C. commit check
D. commit
Answer: B
Explanation:
[edit]
user@host# commit confirmed
commit confirmed will be automatically rolled back in 10 minutes unless confirmed commit complete
#commit confirmed will be rolled back in 10 minutes [edit]
user@host#
https://www.juniper.net/documentation/us/en/software/junos/cli/topics/topic-map/junos-configuration-commit.ht
NEW QUESTION 9
- (Exam Topic 1)
Click the Exhibit button.
You want to make the OSPF route shown in the exhibit the active route for the 10.10.10.0/24 IP address. Which action is required to accomplish this task?
Answer: B
NEW QUESTION 10
- (Exam Topic 1)
A user entered configuration mode and modified the candidate configuration. In this scenario, what are two results? (Choose two.)
Answer: BD
NEW QUESTION 10
- (Exam Topic 1)
Which statement regarding transit traffic processing is correct?
A. Transit traffic is processed by both the control plane and forwarding plane.
B. Transit traffic is only processed by the control plane.
C. Transit traffic is only processed by the forwarding plane
D. Transit traffic is not processed by the local device.
Answer: C
NEW QUESTION 11
- (Exam Topic 1)
Which two statements about login classes are correct? (Choose two.)
Answer: AC
NEW QUESTION 13
- (Exam Topic 1)
Which statement about the Junos OS forwarding table is correct?
Answer: B
NEW QUESTION 16
- (Exam Topic 1)
Which operational mode command will provide real-time usage statistics for the ge-0/0/0 interface?
Answer: B
NEW QUESTION 20
- (Exam Topic 1)
Which three benefits are made possible by the separation of the control plane and forwarding plane of a Junos device? (Choose three.)
Answer: ABE
NEW QUESTION 23
- (Exam Topic 1)
Click the Exhibit button
Answer: B
NEW QUESTION 25
- (Exam Topic 1)
You are creating a route filter that will match the network address of 192.168.64.0/24 In this scenario, which configuration statement will accomplish this task?
Answer: D
NEW QUESTION 28
- (Exam Topic 1)
Which protocol is responsible for learning an IPv6 neighbor's IMAC address?
Answer: A
NEW QUESTION 29
- (Exam Topic 1)
Click the Exhibit button
You are capturing logs to troubleshoot an issue with IS-IS; however, the logs are increasing in size too quickly.
Referring to the exhibit, which configuration statement would solve this problem?
Answer: A
NEW QUESTION 34
- (Exam Topic 1)
What are two important steps when upgrading an SRX300 Series device? (Choose two.)
Answer: AC
NEW QUESTION 36
- (Exam Topic 1)
Click the Exhibit button.
-- Exhibit -- user@router> restart
^
unknown command.
-- Exhibit -
You are troubleshooting a routing issue on a device running Junos. You receive the error shown in the exhibit when you attempt to restart the routing process.
Which statement describes the problem?
Answer: D
NEW QUESTION 37
- (Exam Topic 1)
Which command allows multiple users to edit a configuration while conning only their unique changes?
A. configure exclusive
B. configure batch
C. configure private
D. configure dynamic
Answer: C
Explanation:
The configure private command allows multiple users to edit different parts of a configuration at the same ti and commit only their changes or roll back, without
interfering with each other's changes. When the configure private command is used, you work in a private candidate configuration, which is a copy of the most
recently committed configuration.
https://kb.juniper.net/InfoCenter/index?page=content&id=KB19653&actp=METADATA
NEW QUESTION 38
- (Exam Topic 2)
Answer: D
NEW QUESTION 42
- (Exam Topic 2)
Click the Exhibit button.
A. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the 172.35.0.0/16 and 172.36.0.0/16 subnets.
B. IP addresses that are part of the 172.35.0.0/16 network only.
C. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the subnets of 172.35.0.0/16 network.
D. IP addresses that are part of the 172.35.0.0/16 network, but not IP addresses that are part of the 172.35.0.0/16 network itself.
Answer: C
NEW QUESTION 44
- (Exam Topic 2)
Which two interfaces are considered physical interfaces? (Choose two.)
A. xe-10/2/1
B. ge-0/0/0
C. et-3/0/0/0:0.501
D. et-7/1/4.0
Answer: AB
NEW QUESTION 48
- (Exam Topic 2)
You must archive log messages for an extended period of time for audit and troubleshooting purposes. Which syslog setting should you configure on the Junos
device in this scenario?
A. host
B. facility
C. console
D. severity
Answer: A
NEW QUESTION 51
- (Exam Topic 2)
A packet enters a Junos device. No matching destination entry exists in the forwarding table. How will the device respond?
Answer: B
NEW QUESTION 53
- (Exam Topic 2)
Which command is used to load the rescue configuration?
Answer: B
NEW QUESTION 57
- (Exam Topic 2)
Referring to the exhibit,
what happens when ping packets are sent to management interface address of the local router?
Answer: D
NEW QUESTION 58
- (Exam Topic 2)
While working on a Junos device, you receive the message shown in the exhibit. In this scenario, what should you do to stop the shutdown process?
In this scenario, what should you do to stop the shutdown process?
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/clear-system-reboot.h
NEW QUESTION 59
- (Exam Topic 2)
Which two keystrokes are used to auto-complete commands? (Choose two.)
A. Spacebar
B. Esc
C. Tab
D. End
Answer: AC
NEW QUESTION 64
- (Exam Topic 2)
Which two commands will provide the current configuration of the MX1-PE1 BGP group on your router? (Choose two.)
Answer: BD
NEW QUESTION 67
- (Exam Topic 2)
Exhibit:
While working on a Junos Device, you receive the message shown. In this scenario, what would you do to stop the shutdown process?
Answer: B
NEW QUESTION 69
- (Exam Topic 2)
Which two statements describe PFE functions are true?
Answer: AD
NEW QUESTION 72
- (Exam Topic 2)
Which statement is true about default route preferences?
Answer: D
NEW QUESTION 73
- (Exam Topic 2)
Referring to the exhibit, which command will change the 172.16.10.1/24 IP address to 172.16.100.1/24 IP address?
A. copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
B. set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
C. rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
D. insert interface ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address 172.16.100.1/24
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/rename.html
NEW QUESTION 75
- (Exam Topic 2)
Host A is communicating with Host B through a Layer 2 switch.
What is the highest layer that the switch will inspect the traffic in this scenario?
A. Data Link
B. Transport
C. Network
D. Session
Answer: A
NEW QUESTION 80
- (Exam Topic 2)
What does the "3" in Junos version 14.2R3.2 represent?
Answer: C
NEW QUESTION 84
- (Exam Topic 2)
Which of the following protocols uses both TCP and UDP?
A. FTP
B. SMTP
C. Telnet
D. DNS
Answer: D
NEW QUESTION 89
- (Exam Topic 2)
Which two ping command parameters would be used to troubleshoot MTU issues? (Choose two.)
Answer: AC
NEW QUESTION 90
- (Exam Topic 2)
What configuration parameter on a Junos device modifies the default next-hop resolution behavior of a static route?
A. Resolve
B. No-readvertise
C. Passive
D. Preference
Answer: A
NEW QUESTION 94
- (Exam Topic 2)
Referring to the Exhibit,
A. local preference
B. router preference
C. metric
D. protocol reference number
Answer: C
NEW QUESTION 97
- (Exam Topic 2)
What are two protocols that the Junos OS uses to archive configuration files remotely? (Choose two.)
A. SCP
B. HTTP
C. SFTP
D. FTP
Answer: AD
A. Ctrl + a
B. Ctrl + e
C. Ctrl + u
D. Ctrl + w
Answer: B
Answer: BC
Answer: B
Answer: A
Referring to the exhibit, which command was issued to generate the output?
Answer: B
A. NetBSD
B. FreeBSD
C. Linux
D. OpenBSD
Answer: BC
A. Strict
B. High
C. Low
D. Loose
Answer: AD
Explanation:
There are two modes of unicast RPF, strict mode, and loose mode. The default is strict mode, which means t switch forwards a packet only if the receiving
interface is the best return path to the packet's unicast source address.
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/l3-vpns-unicast-reverse-path.html#:~:text
Answer: D
A. X
B. R
C. T
D. Z
E. B
Answer: ABE
A. 12.0.0.1
B. 168.172.19.39
C. 172.20.14.36
D. 172.33.194.30
E. 192.168.24.43
Answer: C
Answer: AB
A. If the TACACS+ server is available and rejects the username/password provided, the user is not allowed to access the device.
B. If the TACACS+ server is available and rejects the username/password provided, the local password database is checked.
C. If the TACACS+ server is not available, the user is not allowed to access the device.
D. If the TACACS+ server is not available, the local user database is checked.
Answer: CD
Answer: BC
A. amnesiac
B. router
C. Junos
D. user
Answer: A
Answer: CD
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: AC
Answer: AD
A. tcpdump
B. telnet
C. traceroute
D. netstat
Answer: A
A. ip
B. ip6
C. inet
D. inet4
Answer: C
Answer: BDE
A. Ge-0/0/0
B. Ge-0/0/2
C. Ge-0/0/2.0
D. Ge-0/0/1.0
Answer: C
Answer: A
A. load replace
B. load patch
C. load override
D. load set
Answer: C
A. IGMPv3
B. OSPFv2
C. RIPng
D. RIP
Answer: C
A. All data files remain unchanged but all configuration settings returned to factory defaults.
B. All data files are deleted and all configuration settings are returned to factory defaults.
C. All data files are deleted and all configuration settings remain unchanged
D. Disk space is freed by rotating log files and a proposed list of files to be deleted is presented.
Answer: B
A. security policies
B. hostname
C. date/time
D. root authentication
Answer: D
Answer: AC
A. root
B. admin
C. lab
D. juniper
Answer: A
A. Delete
B. Ctrl+Z
C. Spacebar
D. Right Arrow
Answer: C
Answer: D
A. 2bfc::beef:217:cbff:0:5c85
B. 2bfc:0:0:beef:0217:cbff:0:5c85
C. 2BFCnBEEF:0217:CBFF:0:5C85
D. 2bfc:0:beef:0217:cbff:0:5c85
E. 2BFC::BEEF:217:CBFF::5C85
Answer: ABC
* JN0-104 Most Realistic Questions that Guarantee you a Pass on Your FirstTry
* JN0-104 Practice Test Questions in Multiple Choice Formats and Updatesfor 1 Year