Professional Documents
Culture Documents
TATA TRENT - C8 Ronan Sample Tech Pack February 6, 2024 at 4:48:47 PM India Standard Time
Properties
Dates
PO Attributes
Style Description N SS24 FEBF TOP LOS FLL FFR Shipment Date 30.01.2024
CWO SD RONAN
Responsible Users
Page 1 of 17
Sample Tech Pack
Page 2 of 17
Sample Tech Pack
Page 3 of 17
Sample Tech Pack
Page 4 of 17
Sample Tech Pack
Placements
Placement Product BOM Section Supplier Quote Unit Cost UOM Common Qty Cost Common Color
Report 0
Fabrics (1) 0
Full Body WOVEN 60s TWILL 98% Cotton, 2% Spandex Solid 60 x 40 188 x 82 127 Fabrics 0 0 0
Trims (7) 0
Pocket Bag Trims 0 0 0
Waist Band 4 hole button Trims 0 0 0
Waist Tunnel Drawcord Trims 0 0 0
Waist Band Fusing Trims 0 0 0
Waist Band Main Label Trims 0 0 0
Side Seam LABEL WashCare Trims 0 0 0
Bottom Hem Trims 0 0 0
Packaging (0) 0
Services / Details (0) 0
Care Labels
Page 5 of 17
Sample Tech Pack
TATA TRENT - C8 Ronan MENS- NUON-LOOSE FIT CARGO PANT (RONAN) UPDATED ON 9-1-24 Draft-Production 06.02.2024, 4:48 PM
POMs
POM2100 WAIST WIDTH- -1.905 1.905 73.660 78.740 83.820 88.900 93.980 99.060 104.140 109.220 114.300 119.380 124.460
RELAXED
POM74 HP1 - HIP POSITION 0.000 0.000 20.320 20.320 20.320 20.320 20.320 20.320 20.320 20.320 20.320 20.320 20.320
FROM TOP EDGE OF
WAIST BAND
POM75 H3 - HIP WIDTH -1.905 1.905 111.760 116.840 121.920 127.000 132.080 137.160 142.240 147.320 152.400 157.480 162.560
MEASURED STRAIGHT
@ 3 POINT
POM3228 THIGH @ CROTCH 0.000 0.000 73.660 76.200 78.740 81.280 83.820 86.360 88.900 91.440 93.980 96.520 99.060
POM76 KNEE POSITION FROM -1.270 1.270 33.020 33.020 33.020 33.020 33.020 33.020 33.020 33.020 33.020 33.020 33.020
CROTCH POINT
POM78 K - KNEE WIDTH 0.000 0.000 59.690 60.960 62.230 63.500 64.770 66.040 67.310 68.580 69.850 71.120 72.390
POM2122 LEG OPENING WIDTH -0.635 0.635 48.260 49.530 50.800 52.070 53.340 54.610 55.880 57.150 58.420 59.690 60.960
POM532 FR - FRONT RISE INCL. -0.635 0.635 36.195 37.148 38.100 39.053 40.005 40.958 41.910 42.863 43.815 44.768 45.720
WB
POM1596 BACK RISE INCL. WB -0.635 0.635 45.085 46.038 46.990 47.943 48.895 49.848 50.800 51.753 52.705 53.658 54.610
POM535 IL1 - IN-SEAM LENGTH -0.952 0.953 71.120 71.120 71.120 71.120 71.120 71.120 71.120 71.120 71.120 71.120 71.120
FROM CORTCH POINT
TO BOTTOM
'J' Stitch Length at -0.317 0.318 16.193 17.145 17.145 18.098 18.098 19.050 19.050 19.050 19.050 20.003 20.003
Double Needle End
Displaying 1 - 11 of 31 results Units: CM Grading Display: Absolute
Page 6 of 17
Sample Tech Pack
TATA TRENT - C8 Ronan MENS- NUON-LOOSE FIT CARGO PANT (RONAN) UPDATED ON 9-1-24 Draft-Production 06.02.2024, 4:48 PM
POMs
Front Pocket Opening -0.317 0.318 2.540 3.175 3.175 3.810 3.810 4.445 4.445 4.445 5.080 5.080 5.080
Along Waist Seam
Front Pocket Opening -0.317 0.318 16.510 16.510 17.145 17.145 17.780 17.780 18.415 18.415 19.050 19.050 19.050
Along Side Seam
WAIST-BAND Height 0.000 0.000 5.080 5.080 5.080 5.080 5.080 5.080 5.080 5.080 5.080 5.080 5.080
Front Pocket Bag -0.635 0.635 31.115 31.750 31.750 32.385 32.385 33.020 33.020 33.020 33.020 33.020 33.020
Length
Front Pocket Bag Width -0.635 0.635 17.780 18.415 19.050 19.685 19.685 20.320 20.320 20.320 20.320 20.320 20.320
Back Pocket Open at -0.317 0.318 16.510 16.510 17.145 17.145 17.780 17.780 18.415 18.415 19.050 19.050 19.050
Top
BACK POCKET HEIGHT -0.317 0.318 17.780 17.780 18.415 18.415 19.050 19.050 19.685 19.685 20.320 20.320 20.320
AT CENTRE
BACK POCKET HEIGHT -0.317 0.318 15.240 15.240 15.875 15.875 16.510 16.510 17.145 17.145 17.780 17.780 17.780
AT SIDE
Back Pocket Width at -0.317 0.318 13.335 13.335 13.970 13.970 14.605 14.605 15.240 15.240 15.875 15.875 15.875
Bottom
Back Pocket Placement 0.000 0.000 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620
from Waist Seam
CARPENTER POCKET 0.000 0.000 23.495 23.495 24.130 24.130 24.765 24.765 25.400 25.400 26.035 26.035 26.035
WIDTH AT TOP
CARPENTER POCKET 0.000 0.000 17.780 17.780 18.415 18.415 19.050 19.050 19.685 19.685 20.320 20.320 20.320
WIDTH AT BOTTOM
CARPENTER POCKET 0.000 0.000 26.035 26.035 26.670 26.670 27.305 27.305 27.940 27.940 28.575 28.575 28.575
HEIGHT AT SIDE
Displaying 12 - 24 of 31 results Units: CM Grading Display: Absolute
Page 7 of 17
Sample Tech Pack
TATA TRENT - C8 Ronan MENS- NUON-LOOSE FIT CARGO PANT (RONAN) UPDATED ON 9-1-24 Draft-Production 06.02.2024, 4:48 PM
POMs
CARPENTER POCKET 0.000 0.000 28.575 28.575 29.210 29.210 29.845 29.845 30.480 30.480 31.115 31.115 31.115
HEIGHT AT CENTRE
FLAP HEIGHT AT 0.000 0.000 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620 7.620
CENTRE
FLAP WIDTH 0.000 0.000 23.495 23.495 24.130 24.130 24.765 24.765 25.400 25.400 26.035 26.035 26.035
CARPENTER POCKET 0.000 0.000 70.485 70.485 70.485 70.485 70.485 70.485 70.485 70.485 70.485 70.485 70.485
POSITION FROM
BOTTOM HEM END TO
FLAP TOP STITCH AT
SIDE SEAM
TOP CUT AND SEW 0.000 0.000 55.880 55.880 55.880 55.880 55.880 55.880 55.880 55.880 55.880 55.880 55.880
POSITION FROM
BOTTOM HEM END
BOTTOM CUT AND 0.000 0.000 29.845 29.845 29.845 29.845 29.845 29.845 29.845 29.845 29.845 29.845 29.845
SEW POSITION FROM
BOTTOM HEM END
CORD LENGTH OUT cord 0.000 0.000 30.480 30.480 30.480 30.480 30.480 30.480 30.480 30.480 30.480 30.480 30.480
(ONE SIDE) missing
Page 8 of 17
Sample Tech Pack
TATA TRENT - C8 Ronan Menswear - Casual Bottoms (Wovens) CHINOS Draft 06.02.2024, 4:48 PM
Instructions
1. Some mes fabrics may pass all tests but because of styling / end use may be unsuitable. Alterna vely some mes fabrics may not meet the test
requirements , however garment styling / seams may be engineered to make it acceptable.
The test results should be viewed together with the garment to ensure fit for purpose.
1. In some cases wearers trials should be issued to gain a true assessment of fabric in wear / cleanse.
2. Both stability & garment cleanse to be carried out to the buyer's care code guideline (e.g. Machine wash / Dry clean). Then the results and garment
assessment should be used to decide on the exact care code.
3. Garment cleanse should be used to assess suitability of embellishments , contrast trims / s tching , new fabrics , components , prints and any other item
that may need assessing.
4. GARMENT PERFORMANCE TEST : These may be required dependent on fabric / end use / styling & trims. If unsure please discuss with the technologist
5. ADDITIONAL TESTS : These may be required dependent on fabric / end use / styling & trims. If unsure please discuss with the technologist
Base
Test Test Spec Type Description Target Result Target Comment Test Required
Status
Base (20)
ISO 1833 ISO 1833 Base FIBRE Content ±3% Legal Requirements
ISO 3801 ISO 3801 Base Fabric Weight (GSM) ±5%
ISO 6330 ISO 6330 Base Dimensional Stability to Washing stretch side : +3 % to -4% Fabric with stretch
Tumble Dry / Flat Dry
ISO 6330 ISO 6330 Base Dimensional Stability to Washing Length: +3% / -3% 10°C higher than wash care temperature
Tumble Dry / Flat Dry Width: +3% / -3%
ISO 3175 ISO 3175 Base Dimensional Stability to Dry cleaning Length: +3% / -3% Test dry clean stability as stated on wash care
Part I Part I Width: +3% / -3%
ISO ISO Base Tensile Strength 6 Kgs (Length & Width) 50 to 85 GSM (Not applicable for 100% polyamide and
13934-2 13934-2 polyester filaments)
ISO ISO Base Tensile Strength 16Kgs (Length & Width) Above 150 GSM (Not applicable for 100% polyamide
13934-2 13934-2 and polyester filaments)
Displaying 1 - 7 of 20 results
Page 9 of 17
Sample Tech Pack
TATA TRENT - C8 Ronan Menswear - Casual Bottoms (Wovens) CHINOS Draft 06.02.2024, 4:48 PM
Base
Test Test Spec Type Description Target Result Target Comment Test Required
Status
ISO ISO Base Tensile Strength 12Kgs (Length & Width) 101 to 150 GSM (Not applicable for 100% polyamide and
13934-2 13934-2 polyester filaments)
ISO ISO Base Tensile Strength 8 Kgs (Length & Width) 86 to 100 GSM (Not applicable for 100% polyamide and
13934-2 13934-2 polyester filaments)
ISO ISO Base Seam Slippage Production seam on 5 to 7 Kgs (Length & Width) 85 to 100 GSM
13936-1 13936-1 mock
ISO ISO Base Seam Slippage Production seam on 8 to 12Kgs (Length & Width) 101 to 150 GSM and Above
13936-1 13936-1 mock
ISO ISO Base Seam Slippage Production seam on 10 to 14Kgs (Length & Width) 101 to 150 GSM and Above
13935-2 13935-2 mock
ISO ISO Base Seam Slippage Production seam on 7 to 9 Kgs (Length & Width) 85 to 100 GSM
13935-2 13935-2 mock
ISO ISO Base Tear Strength 800gsm (Length & Width) 101 to 150 GSM (Not applicable for 100% polyamide and
13937-1 13937-1 polyester filaments)
ISO ISO Base Tear Strength 600gsm (Length & Width) 86 to 100 GSM (Not applicable for 100% polyamide and
13937-1 13937-1 polyester filaments)
ISO ISO Base Tear Strength 400gsm (Length & Width) 50 to 85 GSM (Not applicable for 100% polyamide and
13937-1 13937-1 polyester filaments)
ISO ISO Base Tear Strength 900gsm (Length & Width) Above 150 GSM (Not applicable for 100% polyamide
13937-1 13937-1 and polyester filaments)
ISO ISO Base Pilling (Martindale) Grade 4 @ 2000 rubs Not for filament yarns
12945 – 12945 – 2
2
ISO ISO Base Abrasion (Martindale) 20000 Rubs. No thread break & shade change Above 250 GSM (Not applicable for 100% polyamide
12947- 12947-2/4 3- 4 at 5000 rubs and polyester filaments)
2/4
ISO ISO Base Abrasion (Martindale) 15000 Rubs. No thread break & shade change Below 250 GSM (Not applicable for 100% polyamide
12947- 12947-2/4 3- 4 at 5000 rubs and polyester filaments)
2/4
Displaying 8 - 20 of 20 results
Page 10 of 17
Sample Tech Pack
TATA TRENT - C8 Ronan Menswear - Casual Bottoms (Wovens) CHINOS Draft 06.02.2024, 4:48 PM
Bulk
Test Test Spec Type Description Target Result Target Comment Test Required
Status
Bulk (8)
ISO 105 C06 ISO 105 C06 Bulk Washing Fastness (Not required for white) Color Change : 4 10°C higher than wash care temperature
Staining : 4 Self Staining : 4
ISO 105 X12 ISO 105 X12 Bulk Rubbing fastness (Not required for white) Dry : 4
Wet : 3-4
ISO 6330 ISO 6330 Bulk Dimensional Stability to Washing Tumble Dry / Flat stretch side : +3 % to -4% Fabric with stretch
Dry
ISO 6330 ISO 6330 Bulk Dimensional Stability to Washing Tumble Dry / Flat Length: +3% / -3% 10°C higher than wash care temperature
Dry Width: +3% / -3%
ISO 3175 ISO 3175 Part Bulk Dimensional Stability to Dry cleaning Length: +3% / -3% Test dry clean stability as stated on wash care
Part I I Width: +3% / -3%
ISO 105 X12 ISO 105 X12 Bulk Rubbing fastness (Not required for white) Dry : 4 Dark Indigo dyed
Wet : 2- 3
ISO 105 X12 ISO 105 X12 Bulk Rubbing fastness (Not required for white) Dry : 4 Brushed, Flannel, peached, raised, corduroy and
Wet : 3 flocked.
ISO 105 D01 ISO 105 D01 Bulk Color Fastness to Dry Cleaning Color Change : 4 Silk, Wool, Acrylic & Blends (as stated on wash-care)
Staining : 4 Self Staining :
4-5
Displaying 1 group and 8 results
Performance
Test Test Spec Type Description Target Target Comment Test Required
Result Status
Performance (1)
Displaying 1 group and 1 result
Page 11 of 17
Sample Tech Pack
TATA TRENT - C8 Ronan Menswear - Casual Bottoms (Wovens) CHINOS Draft 06.02.2024, 4:48 PM
Performance
Test Test Spec Type Description Target Target Comment Test Required
Result Status
GARMENT PERFORMANCE GARMENT PERFORMANCE Performance 3 wash Color Visual appearance before and after of all components and parameters.
TEST GPT ISO 6330 TEST GPT ISO 6330 HLP change : 4 10°C higher than wash-care temperature. Shrinkage to be assessed.
Cross
staining : 4-5
Satisfactory
Assessment
Displaying 1 - 1 of 1 results
Additional
Test Test Spec Type Description Target Result Target Comment Test Required
Status
Additional (1)
ISO 12947- ISO 12947- Additional Abrasion 20000 Rubs. No thread break & shade change 3- 4 Above 250 GSM (Not applicable for 100% polyamide and
2/4 2/4 (Martindale) at 5000 rubs polyester filaments)
Displaying 1 group and 1 result
Page 12 of 17
Sample Tech Pack
Page 13 of 17
Sample Tech Pack
Fit comments:
Technical comments:
Page 14 of 17
Sample Tech Pack
Page 15 of 17
Sample Tech Pack
Evaluation by Sample
Dim Tol (-) Tol (+) Hide Silver Seal-003035 (01) Comment Review
Comment
Target Actual Actual Sample Sample Revised
Delta Actual Actual Delta
Page 16 of 17
Sample Tech Pack
Evaluation by Sample
Dim Tol (-) Tol (+) Hide Silver Seal-003035 (01) Comment Review
Comment
Target Actual Actual Sample Sample Revised
Delta Actual Actual Delta
CARPENTER POCKET WIDTH AT TOP 0.000 0.000 24.130 24.130 0.000 24.130
CARPENTER POCKET WIDTH AT BOTTOM 0.000 0.000 18.415 18.415 0.000 18.415
CARPENTER POCKET HEIGHT AT SIDE 0.000 0.000 26.670 25.400 -1.270 26.670
CARPENTER POCKET HEIGHT AT CENTRE 0.000 0.000 29.210 29.210 0.000 29.210
FLAP HEIGHT AT CENTRE 0.000 0.000 7.620 7.620 0.000 7.620
FLAP WIDTH 0.000 0.000 24.130 24.130 0.000 24.130
CARPENTER POCKET POSITION FROM BOTTOM HEM END TO FLAP 0.000 0.000 70.485 70.485 0.000 70.485
TOP STITCH AT SIDE SEAM
TOP CUT AND SEW POSITION FROM BOTTOM HEM END 0.000 0.000 55.880 53.975 -1.905 55.880
BOTTOM CUT AND SEW POSITION FROM BOTTOM HEM END 0.000 0.000 29.845 27.940 -1.905 29.845
CORD LENGTH OUT (ONE SIDE) 0.000 0.000 30.480 0.000 -30.480 30.480 cord
missing
Displaying 22 - 31 of 31 results Units: CM
Page 17 of 17