Professional Documents
Culture Documents
TATA TRENT - C8 Mex Sample Tech Pack February 7, 2024 at 9:25:17 AM India Standard Time
Properties
Dates
PO Attributes
Style Description N SS24 MARF MID STL FLL FFR Shipment Date 15.02.2024
CWO SD MEX
Responsible Users
Page 1 of 20
Sample Tech Pack
Placements
Placement Product BOM Section Supplier Quote Unit Cost UOM Common Qty Cost Common Color Dark Blue
Report 0
Fabrics (1) 0
Care Labels
Page 2 of 20
Sample Tech Pack
Page 3 of 20
Sample Tech Pack
Page 4 of 20
Sample Tech Pack
Page 5 of 20
Sample Tech Pack
Page 6 of 20
Sample Tech Pack
Page 7 of 20
Sample Tech Pack
Page 8 of 20
Sample Tech Pack
Page 9 of 20
Sample Tech Pack
Page 10 of 20
Sample Tech Pack
TATA TRENT - C8 Mex Menswear-NUON -DENIM Bottom-STRAIGHT LEG FIT DNM- H&M 9-10-2023- UPDATED SPEC. Approved-Sample 03.12.2023, 4:40 PM
Size Chart Menswear-NUON -DENIM Bottom- Tolerance DENIM BOTTOMS Base Size 32
STRAIGHT LEG FIT DNM- H&M 9-10- Size Range Menswear Size Range:- Numeric Grading DENIM BOTTOMS
2023- UPDATED SPEC.
Selected Sizes 28-40
Description
POMs
WAIST MEASURE STRAIGHT -1 1 30 1⁄2 32 1⁄2 34 1⁄2 36 1⁄2 38 1⁄2 40 1⁄2 42 1⁄2
LEG OPENING -1⁄8 1⁄ 14 1⁄4 14 3⁄4 15 1⁄4 15 3⁄4 16 1⁄4 16 3⁄4 17 1⁄4
8
FRONT RISE INCLUDING WAIST BAND EXCLUDING GUSET -1⁄16 1⁄ 10 10 3⁄8 10 3⁄4 11 1⁄8 11 1⁄2 11 7⁄8 12 1⁄4
16
BACK RISE INCLUDING WAISTBAND.. -1⁄16 1⁄ 14 3⁄4 15 1⁄8 15 1⁄2 15 7⁄8 16 1⁄4 16 5⁄8 17
16
J STITCH LENGTH (EXCLUDING W/B) -1⁄16 1⁄ 6 6 6 1⁄4 6 1⁄4 6 1⁄2 6 1⁄2 6 3⁄4
16
Page 11 of 20
Sample Tech Pack
TATA TRENT - C8 Mex Menswear-NUON -DENIM Bottom-STRAIGHT LEG FIT DNM- H&M 9-10-2023- UPDATED SPEC. Approved-Sample 03.12.2023, 4:40 PM
POMs
FRONT POCKET POSITION FROM WAIST SEAM -1⁄16 1⁄ 4 1⁄2 4 1⁄2 4 3⁄4 4 3⁄4 5 5 5 1⁄4
16
FRONT POCKET OPENING ALONG SIDE SEAM -1⁄16 1⁄ 2 1⁄2 2 1⁄2 2 3⁄4 2 3⁄4 3 3 3 1⁄4
16
FRONT POCKET BAG WIDTH -1⁄4 1⁄ 6 1⁄2 6 3⁄4 7 7 7 1⁄4 7 1⁄4 7 1⁄2
4
CPO - COIN POCKET OPENING 0 0 3 1⁄4 3 1⁄4 3 1⁄4 3 1⁄4 3 1⁄4 3 1⁄4 3 1⁄4
COIN POCKET LENGTH AT CF 0 0 2 1⁄2 2 1⁄2 2 1⁄2 2 1⁄2 2 1⁄2 2 1⁄2 2 1⁄2
LOOP WIDTH 0 0 1⁄ 1⁄ 1⁄ 1⁄ 1⁄ 1⁄ 1⁄
2 2 2 2 2 2 2
BACK PATCH POCKET POSITION FROM YOKE SIDE SEAM 0 0 1 1 1 1⁄4 1 1⁄4 1 1⁄2 1 1⁄2 1 1⁄2
Page 12 of 20
Sample Tech Pack
TATA TRENT - C8 Mex Menswear - Denim Washed (Wovens) NUON DENIMS BOTTOM. Draft 07.02.2024, 9:25 AM
Instructions
1. Some mes fabrics may pass all tests but because of styling / end use may be unsuitable. Alterna vely some mes fabrics may not meet the test
requirements , however garment styling / seams may be engineered to make it acceptable.
The test results should be viewed together with the garment to ensure fit for purpose.
1. In some cases wearers trials should be issued to gain a true assessment of fabric in wear / cleanse.
2. Both stability & garment cleanse to be carried out to the buyer's care code guideline (e.g. Machine wash / Dry clean). Then the results and garment
assessment should be used to decide on the exact care code.
3. Garment cleanse should be used to assess suitability of embellishments , contrast trims / s tching , new fabrics , components , prints and any other item
that may need assessing.
4. GARMENT PERFORMANCE TEST : These may be required dependent on fabric / end use / styling & trims. If unsure please discuss with the technologist
5. ADDITIONAL TESTS : These may be required dependent on fabric / end use / styling & trims. If unsure please discuss with the technologist
Base
Test Test Spec Type Description Target Result Target Comment Test Required
Status
Base (18)
ISO 1833 ISO 1833 Base FIBRE Content ±3% Legal Requirements
ISO 3801 ISO 3801 Base Fabric Weight (GSM) ±5%
ISO 6330 ISO 6330 Base Dimensional Stability to Washing stretch side : +3 % to -4% Fabric with stretch
Tumble Dry / Flat Dry
ISO 6330 ISO 6330 Base Dimensional Stability to Washing Length: +3% / -3% 10°C higher than wash care temperature
Tumble Dry / Flat Dry Width: +3% / -3%
ISO ISO Base Tensile Strength 6 Kgs (Length & Width) 50 to 85 GSM (Not applicable for 100% polyamide and
13934-2 13934-2 polyester filaments)
ISO ISO Base Tensile Strength 16Kgs (Length & Width) Above 150 GSM (Not applicable for 100% polyamide
13934-2 13934-2 and polyester filaments)
ISO ISO Base Tensile Strength 12Kgs (Length & Width) 101 to 150 GSM (Not applicable for 100% polyamide and
13934-2 13934-2 polyester filaments)
Displaying 1 - 7 of 18 results
Page 13 of 20
Sample Tech Pack
TATA TRENT - C8 Mex Menswear - Denim Washed (Wovens) NUON DENIMS BOTTOM. Draft 07.02.2024, 9:25 AM
Base
Test Test Spec Type Description Target Result Target Comment Test Required
Status
ISO ISO Base Tensile Strength 8 Kgs (Length & Width) 86 to 100 GSM (Not applicable for 100% polyamide and
13934-2 13934-2 polyester filaments)
ISO ISO Base Seam Slippage Production seam on 5 to 7 Kgs (Length & Width) 85 to 100 GSM
13936-1 13936-1 mock
ISO ISO Base Seam Slippage Production seam on 8 to 12Kgs (Length & Width) 101 to 150 GSM and Above
13936-1 13936-1 mock
ISO ISO Base Seam Slippage Production seam on 10 to 14Kgs (Length & Width) 101 to 150 GSM and Above
13935-2 13935-2 mock
ISO ISO Base Seam Slippage Production seam on 7 to 9 Kgs (Length & Width) 85 to 100 GSM
13935-2 13935-2 mock
ISO ISO Base Tear Strength 800gsm (Length & Width) 101 to 150 GSM (Not applicable for 100% polyamide and
13937-1 13937-1 polyester filaments)
ISO ISO Base Tear Strength 600gsm (Length & Width) 86 to 100 GSM (Not applicable for 100% polyamide and
13937-1 13937-1 polyester filaments)
ISO ISO Base Tear Strength 400gsm (Length & Width) 50 to 85 GSM (Not applicable for 100% polyamide and
13937-1 13937-1 polyester filaments)
ISO ISO Base Tear Strength 900gsm (Length & Width) Above 150 GSM (Not applicable for 100% polyamide
13937-1 13937-1 and polyester filaments)
ISO ISO Base Abrasion (Martindale) 20000 Rubs. No thread break & shade change Above 250 GSM (Not applicable for 100% polyamide
12947- 12947-2/4 3- 4 at 5000 rubs and polyester filaments)
2/4
ISO ISO Base Abrasion (Martindale) 15000 Rubs. No thread break & shade change Below 250 GSM (Not applicable for 100% polyamide
12947- 12947-2/4 3- 4 at 5000 rubs and polyester filaments)
2/4
Displaying 8 - 18 of 18 results
Page 14 of 20
Sample Tech Pack
TATA TRENT - C8 Mex Menswear - Denim Washed (Wovens) NUON DENIMS BOTTOM. Draft 07.02.2024, 9:25 AM
Performance
Test Test Spec Type Description Target Target Comment Test Required
Result Status
Performance (2)
GARMENT PERFORMANCE GARMENT PERFORMANCE Performance 3 wash Color Visual appearance before and after of all components and parameters.
TEST GPT ISO 6330 TEST GPT ISO 6330 HLP change : 4 10°C higher than wash-care temperature. Shrinkage to be assessed.
Cross
staining : 4-5
Satisfactory
Assessment
ISO 3071 ISO 3071 Performance PH ph. 4-8 To be included in GPT test
Displaying 1 group and 2 results
Additional
Test Test Spec Type Description Target Result Target Comment Test Required
Status
Additional (2)
BS EN 14704-1 BS EN 14704-1 Additional Residual Max (5%) on stretch side Fabric with stretch
:2005 :2005 Extension
ISO 12947-2/4 ISO 12947-2/4 Additional Abrasion 20000 Rubs. No thread break & shade change 3- Above 250 GSM (Not applicable for 100% polyamide and
(Martindale) 4 at 5000 rubs polyester filaments)
Displaying 1 group and 2 results
Page 15 of 20
Sample Tech Pack
Page 16 of 20
Sample Tech Pack
Page 17 of 20
Sample Tech Pack
Page 18 of 20
Sample Tech Pack
Evaluation by Sample
Dim Tol (-) Tol (+) Hide Silver Seal-002967 (01) Comment Review
Comment
Target Actual Actual Sample Sample Actual Revised
Delta Actual Delta
WAIST MEASURE STRAIGHT -2.540 2.540 87.630 88.900 1.270 87.630 BRING BACK TO
SPEC
HIP POSITION FROM TOP EDGE OF WAIST BAND 0.000 0.000 20.320 20.320 0.000 20.320
HIP WIDTH MEASURED STRAIGHT @ 3 POINT -1.000 1.000 106.680 105.410 -1.270 106.680 BRING BACK TO
SPEC
THIGH WIDTH @ CROTCH -0.500 0.500 63.500 64.770 1.270 63.500 BRING BACK TO
SPEC
KNEE POSITION FROM CROTCH 0.000 0.000 33.020 33.020 0.000 33.020
K - KNEE WIDTH 0.000 0.000 43.180 43.180 0.000 43.180
CAFF POSITION FROM KNEE POSITION 0.000 0.000 12.700 12.700 0.000 12.700
CAFF WIDTH 0.000 0.000 40.640 40.640 0.000 40.640
LEG OPENING -0.250 0.250 38.735 39.370 0.635 38.735 BRING BACK TO
SPEC
BOTTOM HEM HEIGHT -BH 0.000 0.000 1.270 1.270 0.000 1.270
FRONT RISE INCLUDING WAIST BAND EXCLUDING -0.125 0.125 27.305 28.575 1.270 27.305 BRING BACK TO
GUSET SPEC
BACK RISE INCLUDING WAISTBAND.. -0.125 0.125 39.370 40.640 1.270 39.370 BRING BACK TO
SPEC
INSEAM LENGTH FROM CROTCH POINT 0.000 0.000 81.280 82.550 1.270 81.280 BRING BACK TO
SPEC
WAIST BAND HEIGHT 0.000 0.000 4.128 4.128 0.000 4.128
J STITCH LENGTH (EXCLUDING W/B) -0.125 0.125 15.875 16.193 0.318 15.875
J STITCH WIDTH 0.000 0.000 4.128 4.128 0.000 4.128
Displaying 1 - 16 of 33 results Units: CM
Page 19 of 20
Sample Tech Pack
Evaluation by Sample
Dim Tol (-) Tol (+) Hide Silver Seal-002967 (01) Comment Review
Comment
Target Actual Actual Sample Sample Actual Revised
Delta Actual Delta
FRONT POCKET POSITION FROM WAIST SEAM -0.125 0.125 12.065 11.430 -0.635 12.065 BRING BACK TO
SPEC
FRONT POCKET OPENING ALONG SIDE SEAM -0.125 0.125 6.985 7.620 0.635 6.985 BRING BACK TO
SPEC
FRONT POCKET BAG LENGTH -0.635 0.635 25.400 25.400 0.000 25.400
FRONT POCKET BAG WIDTH -0.635 0.635 17.780 17.780 0.000 17.780
CPO - COIN POCKET OPENING 0.000 0.000 8.255 8.255 0.000 8.255
COIN POCKET LENGTH AT CF 0.000 0.000 6.350 6.350 0.000 6.350
NO. OF BELT LOOPS 0.000 0.000 12.700 12.700 0.000 12.700
LOOP LENGTH 0.000 0.000 6.033 6.033 0.000 6.033
LOOP WIDTH 0.000 0.000 1.270 1.270 0.000 1.270
YOKE HEIGHT @ CENTRE BACK 0.000 0.000 5.080 6.033 0.953 5.080 BRING BACK TO
SPEC
YOKE HEIGHT @ SIDE SEAM BELOW WAIST SEAM 0.000 0.000 2.858 2.858 0.000 2.858
PATCH POCKET HEIGHT AT CENTRE 0.000 0.000 17.780 17.780 0.000 17.780
PATCH POCKET HEIGHT AT SIDE 0.000 0.000 15.240 15.240 0.000 15.240
PPT - PATCH POCKET WIDTH AT TOP 0.000 0.000 17.780 17.145 -0.635 17.780 BRING BACK TO
SPEC
PATCH POCKET WIDTH AT BTM CORNER 0.000 0.000 15.240 14.605 -0.635 15.240 BRING BACK TO
SPEC
BACK POCKET POSITION FROM CENTER BACK 0.000 0.000 5.080 5.080 0.000 5.080
BACK PATCH POCKET POSITION FROM YOKE SIDE 0.000 0.000 3.175 3.175 0.000 3.175
SEAM
Displaying 17 - 33 of 33 results Units: CM
Page 20 of 20