Professional Documents
Culture Documents
Double Diaphragm Pump en p22-23
Double Diaphragm Pump en p22-23
Temperature limits: 93 °C 93 °C
Air inlet: 1/4" NPT female 1/4" NPT female Material description:
(G 1/2 BSP female)1) (G 1/2 BSP female)1)
TPV (NBR-PP) = NBR/PP-Compound
Air outlet: 3/8" NPT female 3/8" NPT female TPV (EPDM-PP) = EPDM/PP-Compound
Suction: 1/2" BSP female 1/2" BSP female PP = Polypropylene
PA = Polyamide
Pressure joint: 1/2" BSP female 1/2" BSP female
PTFE = Polytetrafluorethylene
Weight: 4.5 kg 9.1 kg
FPM = Fluor Elastomer
if the air flow control valve is used (not included in the delivery extent – see page 37).
1)
DMP 1/2" ALE Alu/TPV (EPDM-PP)** Aluminium TPV (EPDM-PP), TPV (EPDM-PP), EPDM 5611+040
DMP 1/2" SSB SS/TPV (NBR-PP)** Stainless Steel TPV (NBR-PP), TPV (NBR-PP), NBR 5621+040
DMP 1/2" SSE SS/TPV (EPDM-PP)** Stainless Steel TPV (EPDM-PP), TPV (EPDM-PP), EPDM 5621+020
DMP 1/2" SST SS/PTFE** Stainless Steel PTFE, PTFE, PTFE 5621+000
DMP 1/2" SSV SS/FPM** Stainless Steel FPM, FPM, FPM 5621+060
**Ex II 2 GD c TX
22
Lutz Double Diaphragm Pumps
Diaphragm materials: FPM
H (m wc)
PERFORMANCE U
CRVE(1/2”RUBBER)*
Typical application:
200 l-drum pumping, ink recirculation and feed, chemicals, solvents, acids, 8,0Additional
80 pressure joint at the
DISCHARGE FLOW-Liters/Min.
6,0 60
80 184
(5,4) (55,9)
PRESSURE INLET/OUTLET PSIG (BARS)
4,0 40
40 92
(2,7) (27,9)
20 46
(1,3) (13,9)
2,0 20
0 2 4 6 8 10 12 14 16
DISCHARGE FLOW-U.S. Gals./Min.
0 0
H (m wc) Diaphragm materials: FPM 0 15 30 45 60
Measured values (± 10%) determined with water at 20 °C and suction lift 0. Q (l/min.)
Characteristic curve
required p [bar]
100 100
DISCHARGE FLOW-Liters/Min.
10,0 10,0
pressure
6
9) Air consumption in Nm³/h Air consumption in Nm³/h
8,5 17 25 34
120 7.5 15.1 22.7 30.3 37.9 45.4 53 60.6
276
(8,2) (83,9)
AIR CONSUMPTION (SCFM)
required
0
9)
100 5 10 15 20 230
Working
6,0
(6,8)
60 (69,9)
4
9)
8,0 80 8,0 80
Working pressure
6 80
9) 184
(5,4)
8,5 17 25 34 8,5 17 25 34
TOTAL HEAD IN FEET (METERS)
(55,9)
PRESSURE INLET/OUTLET PSIG (BARS)
8
TOTAL HEAD IN FEET (METERS)
09)
40
9)
4,0
60 138
(4,1) (41,9)
6,0 60 6,0 60
49)
9) 40 92
89)
9) 2,0 20
20 46
40 40
(1,3)
4,0 (13,9)
4,0
9)
0 2 4 6 8 10 12 14 16
0 0 0 0
H (m wc) Diaphragm
0 materials:
15 TPV
30 (EPDM-PP),
45 TPV (NBR-PP)
60 0 15 30 45 60
Measured values (± 10%) determined with water at 20 °C and suction lift 0. Q (l/min.) Measured values (± 10%) determined with water at 20 °C and suction lift 0. Q (l/min.)
Characteristic curve
required p [bar]
PERFO80
8,0 RMANCE U
CRVE(1/2” PTFE)* Characteristic curve Characteristic curve
Working pressure required p [bar]
p [bar]
9)
6,0 60
8,0
100
(6,8) 80 5 10 15 20 230
(69,9) 8,0 80
Working pressure
49)
9)
80 8,5 17 25 34 184
8,5 17 25 34
TOTAL HEAD IN FEET (METERS)
(5,4) (55,9)
40
PRESSURE INLET/OUTLET PSIG (BARS)
89)
9) 4,0
TOTAL HEAD IN FEET (METERS)
9)
40 92
(2,7)
2,0 20
(27,9)
9)
4,0 20
40 46
4,0 40
(1,3) (13,9)
0 0 0 2 4 6 8 10 12 14
0 0 0 0
H (m wc) 0 15 Diaphragm45materials:
30 60PTFE 0 15 30 45 60
Measured values (± 10%) determined with water at 20 °C and suction lift 0. Q (l/min.) Measured values (± 10%) determined with water at 20 °C and suction lift 0. Q (l/min.)
Characteristic curve
required p [bar]
0
9)
10,0 100
king pressure
23
9)
6
9)
METERS)
8 6,0 60
09)