Professional Documents
Culture Documents
4th Edition
1-1-509
INSTRUCTIONS FOR ORDERING REPAIR PARTS
When ordering parts, specify Compressor Model, Size and allow the return of the goods without our consent and
Serial Number (see name plate on compressor). Serial then only on a basis of a charge for service and rehandling
Number is also stamped on drive end of crankcase. plus transportation charges.
AU orders for parts should be placed with the nearest Transportation charges must be prepaid. If it is necessary
Sales and Service Office. to return a part to the factory for duplication or inspection,
do not fail to do the following:
Reference numbers shown in the left hand column of
the Parts Lists are used to help locate the parts shown 1. Write the nearest Sales and Service Office a letter
on the Drawings and Sectional Views. DO NOT ORDER advising what material you wish to return and why.
BY REFERENCE NUMBERS.
2. After receiving permission to return the item or items,
After locating the reference number, the part number obtain from the Sales and Service Office the correct
may be found for your particular unit under the correct forms filled out by that office for the proper return
Model Number column. of material.
Specify exactly the number of parts required (see column 3. Place a tag in the package showing your name and
“Qty. Req. Per Comp.”). DO NOT ORDER BY SETS. address.
To determine the Right Hand and Left Hand side of the 4. Tag each article in the box or package stating what
compressor, stand at the drive end of the crankshaft and and how many are returned.
face the compressor.
5. Always give the serial number of the machine from
which the parts were removed or the invoice number
PARTS RETURNED on which the parts were originally shipped.
all claims must be made within five days after receipt AU parts returned for credit should be handled in the
of goods. If order has been filled correctly, we cannot same manner as that for duplication or inspection.
INDEX
1-1-509 Page 1
I
NI
“U-lJ
-\ \ “Y\
I I
1-1-509 Page 2
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
MODELS
QTY. MODELS MODELS ADR
REQ. ADR ADR 1o11
PER * 1009 1013
NAME OF PART COMP. 1004-1008 1010 1014
ASM CRANKCASE, Incl. Ref. No. 10, 15, 18, 19, 20, 29, 30 & 31 ACR1A ACR1A ACRIA
SHEAVE ** ** ** **
ASM CRANKSHAFT, Incl. Ref. No. 4, 5, 6 & Bearing Inserts 200VABO04A 200VABO04A 200ACRO04B
KEY-SQUARE 35B81 35B81 35B381
NUT-CRANKSHAFT VAB381 VAB381 VAB381
SET SCREW 76F45 76F45 76F45
* Some Power End parts for Compressor Models ADR 1OOO thru ADR 1OO3 are not available. For repair arts contact Quincy Repair Department.
** Consult nearest Gardner-Denver Company Sales and Service Office, Model and Serial Number requ .
0 Not shown on illustration.
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
QTY. MODELS
REQ. ADRA1OOO
REF. PER ADRA1OO1
NO. NAME OF PART COMP. ADRA1OO2
1 ASM CRANKCASE, Incl. Ref. No. 10, 15, 18, 19, 20, 29, 30 & 31 1 2ACR1A
2 SHEAVE * 1 *
3 ASM CRANKSHAFT, Incl. Ref. No. 4, 5, 6 & Bearing Inserts 1 201ACRO04B
4 KEY 1 35B381
5 SET SCREW-SoHd 4 76F45
6 NUT-CRANKSHAFT 1 VAB381
7 SEAL-OIL 1 60G23
8 BEARING 2 12C29
9 SHIM 1 77B22
10 SCREW 6 75A18N
11 HOUSING-BEARING 1 VAB6
11A GASKET 1 25C1997
0 PLUG, Bearing Housing 2 64AA6
12 GASKET 2 25C627
13 PLATE-INSPECI’ION 1 AAL9
14 SCREW 12 75A130
15 PLUG-PIPE 2 64AA4
16 PLATE-INSPECTION 1 AAL8
* Consult your nearest Gardner-Denver Company Sales and Service Office, Model and Serial Number required,
0 Not shown on illustration.
1-1-509 Page 4
Order by Part Number and Description. Reference Numbers for your convenience only.
B75168
QTY. MODELS
REQ. ADRA1OOO
REF. PER ADRA1OO1
NO. NAME OF PART COMP. ADRA1OO2
1 STRAP-ECCENTRIC 1 ADS22
2 ASM OIL PUMP PLUNGER 1 2012191
3 VALVE -OIL RELIEF 1 4AUX534
4 SCREEN-OIL 1 ACE19
5 ASM OIL PUMP INLET 1 ACE520
6 SCREW 2 75A9
7 ELBOW (450), Gauge 1 40E40
8 GAUGE -OIL PRESSURE 1 2009741
9 BODY-OIL PUMP 1 ADS197
10 SCREW 8 75A5
11 GASKET 1 25C1817
1-1-509 Page 5
ORDER BY PART NUMBER AND DESCpriTION. REFERENCE NUMBERS FOR YOUR COnENIENCE ONLY.
J 21
2 C75711
LP CYLINDER, HEAD, PISTON PART NO. PART NO. PART NO. PART NO.
& CONNECTING ROD
1-1-509 Page 6
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
6 7 II
75712
MODELS
QTY. ADR
REQ. MODELS 1001, 1002 MODELS
REF. PER ADR 1004-1011 ADRA
NO. NAME OF PART COMP. 1000, 1003 1013,1014 1000-1002
* Pistons available in .030” oversize. Piston Rings also available in . O1O" and .030” oversize.
For Piston Ring part numbers and Piston Ring arrangement see page 18.
** connecting Rods originally furnished for Models ADR1OOO and ADR1OO3 are no longer available.
For repair consULt Quincy Repair Department.
* Also available in .030” undersize only, part numbers 203ADL174 and 201 ADL174.
** Also available in .030” undersize only, part number 203 ACR174.
*** Also available in O30" Inrlersize onlv, art number 201 AC R174.
1-1-509 Page 7
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
16 17
08
MODELS
QTY. MODELS ADR1OO7
thru 1011
REQ. ADR1OOO
ADR1013
REF. PER thru ADRA1OOO
NO. NAME OF PART COMP. ADR1OO6 ADRA1OO1
* Valve assembly furnished for Models ADR1OOO thru 1006 and 1013 is no longer avail-
able. For repair order IAAL526.
** Each Bumper Assembly furnished with two (2) scrEws : 75D4 (1-1/4” long) for forged
steel seats (13/16” thick) and 75AH8 (1-3/8” long) for cast iron seats (l” thick). Screws
may be ordered separately. Threaded end of screw must not protrude through bumper.
*** The AAL467 Upper Unloader Plunger is no longer furnished. When a new upper un-
loader plunger is required for Models ADR1OOO thru ADR1OO6, the 2ABL467 must be
ordered along with the 50E4 Nut and the 62E3 Cotter.
1-1-509 Page 8
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
QTY.
REQ. MODELS
REF. PER ADR1014
NO. NAME OF PART COMP. ADRAIO02
10 PLUNGER-UNLOADER 1 1VB42217
11 SCREW 1 75LM7
12 SEAL-PLUNGER 1 60DD5
13 RETAINER-SEAL 1 vB706
14 GASKET 3 25F15
15 SET SCREW 3 76GG9
16 NUT 3 50Q18
17 COVER 1 5VB42185
18 SCREW 4 75A29
19 GASKET 1 25R27
20 PIN-FINGER 4 VB218
21 SPRING 4 78A394
22 C LAMP - VALVE 1 6vB42194
23 Screw 2 75A34
24 WASHER-LOCK 2 95H2
1-1-509 Page 9
ORdeR RV PART NIJMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
MODELS
ADR1OOO
QTY. thru lOll
REQ. ADR1013
REF. PER ADRA1OOO
NO. NAME OF PART COMP. ADRA1OO1 MODELS
ADR1OOO
LP SUCTION VALVE - PLAIN PART NO. QTY. thru lOll
REQ. ADR1013
ASM SUCTION VALVE, Incl. Ref. #1 thru REF. PER ADRA1OOO
5&8 1 2WBG563 NO. NAME OF PART COMP. ADRA1OO1
1 SEAT 1 7YC14
2 DISC -VALVE (Outer) 1 90V6 LP DISCHARGE VALVE PART NO.
3 DISC -VALVE (Inner) 1 90V3
4 ASM BUMPER, hcl. Ref. #6 * 1 WAF164X ASM DISCHARGE VALVE, Incl. Ref. #1
5 SPRING 6 78F4 thru 5 & 8 1 1WBG507
6 SCREW * 1 75D4 I BUMPER 1 WAF128
6 SCREW * 1 75AH8 2 ASM VALVE SEAT, Incl. Ref. #7 * 1 YC127X
8 GASKET 1 25L6 3 DLSC -VALVE (Outer) 1. 90V6
4 DISC-VALVE (Inner) 1 90V3
9 CLAMP-SUCTION VALVE 1 ACRl94 5 SPRING 6 78F4
10 SET SCREW 1 76GGl 7 STUD * 1 vA207
11 GASKET 1 25Fl3 8 GASKET 1 25L6
12 NUT 1 50Q12
13 C OVER - PLAIN VALVE 1 lWBG11 9 C LAMP -VALVE 1 AAL194
14 GASKET 1 25R27 10 GASKET 1 25R27
11 COVER 1 lWBGI1
* Each Bumper Assembly furnished with two (2) screws: 75D4 12 SET SCreW 1 76GG1
(1 -1/4" long) for forged steel seats (13/16” thick) and 75AH8 13 GASKET 1 25Fl3
(1-3/8 long) for cast iron seats (1 “ thick). Screws may be 14 NUT 1 50Q17
ordered separately. Threaded end of screw must not pro-
trude through bumper. * Stud furnished with seat but may be purchased separately.
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
QTY.
REQ. MODELS
REF. PER ADR1014
no . NAME OF PART COMP. ADRA1OO2 C74074
MODELS
ADR1007
thru 1Oll
ADR1O13
QTY. ADRIO14
REQ. MODELS ADRA1OOO
REF. PER ADR1000 ADRA1OO1
NO. NAME OF PART COMP. thru 1006 ADRA1OO2
0 Valve assembly famished, for Models ADR1OOO thru 1006 is no longer available. For
repair order 2ABL526.
** screw furnished with bumper but may be purchased separately.
*** The ABL467 Upper Unloader Plunger is no longer furnished. When a new upper un-
loader plunger is required for Models ADR1OOO thru ADR1OO6, the 1ABL467 must be
ordered along with the 50E4 Nut and the 62E3 Cotter.
1-1-509 Page 12
ORDER BY PART NUMBER AND DESCRIPTION. R F reNCE NUMBERS FOR YOUR CONVENieNCE ONLY.
B39325
MODELS MODELS
ADR1OOO ADRIOOO
thru 1Oll thru1Oll
ADR1013 ADR1OI3
w qTY. ADR1014 qTY. ADR1014
reQ. ADRAIOOO reQ. ADRA1OOO
REF. pE R ADRA1OO1 REF. p‘ER ADRA1OO1
no. NAME OF PART cOMP. ADRA1002 no. NAME OF PART cOMP. ADRA1OO2
ASM SUCTION VALVE, Incl. Ref. #1 ASM DISCHARGE VALVE, Incl. Ref.
thru 4 & 7 1 2ABL563 #1 thru 4 & 7 1 1ABL507
1 SEAT 1 ABL202 1 BUMPER 1 ABL128
2 SPRING 3 78F4 2 DISC -VALVE 1 90V3
3 ASM BUMPER, Incl. Ref. #6 * 1 ABL164x 3 ASM SEAT, Incl. Ref. #6 * 1 2YA127X
4 DISC-VALVE 1 90V3 4 SPRING 3 78F4
6 SCREW * 1 75D4 6 SCREW * 1 VA207
7 GASKET 1 25L3 7 GASKET 1 25L3
* Screw furnished with bumper but may be purchased separately. * Screw furnished with seat but may be purchased separately.
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
13 I 13
10
III C75713
—
MODELS
QTY. ADR MODELS
REQ. 1000 ADR MODEL
REF. PER 1001 1002 ADR
NO. NAME OF PART COMP. 1003 1005 1004
* * ,:
ASM INTERCOOLER, Incl. Ref. #1 thru 12 1
1 TUBE-INTERCOOLER (Upper) 3 ADR243 1ADR243 ADR243
2 TUBE-INTERCOOLER (Lower) See ( ) ADR243 (2) 1ADR243(3 1ADR243 (3:
3 HEADER-INTERCOOLER 1 * * >k
4 ELBOW-PIPE STREET 1 64D1O 64DI0 64DI0
5 COCK, Drain 2 90W1 90W1 90W1
6 PLUG-CSK. , Pipe 2 None None None
* <c ,x
7 HEADER-INTERCOOLER 1
8 BRACE, Intercooler Tube 2 None ADR613 1ADR613
9 SCREW, Intercooler Tube Brace See ( ) None 75A183 (8) 75A183 (10)
10 SPACER, Intercooler Tube Brace See ( ) None 80A52 (8) 80A52 (10)
11 NUT, Tube Brace See ( ) None 50B1 (8) 50B1 (10)
12 WASHER, Tube Brace See ( ) None 95B1 (8) 95B1 (10)
* Intercooler assemblies originally furnished for Models shown above are no longer available. For
repair order interchangea~le 3ADR243A. Individual parts for the original assemblies are still
available except for the Reference #3 & 7 headers. If headers are required for repair the entire
Intercooler assembly must be ordered.
1-1-509 Page 14
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
13 I 13
QTY.
REQ. MODELS MODELS
REF. PER ADR ADR1013
NO. NAME OF PART COMP. 1006-1011 ADR1014
1-1-509 Page 15
ORDER BY PART NUMBER AND DESCRIPTION. REFERENCE NUMBERS FOR YOUR CONVENIENCE ONLY.
13 I 13
QTY. MODELS
REQ. MODEL ADRA
REF. PER ADRA 1001
NO. NAME OF PART COMP. 1000 1002
*
ASM INTERCOOLER, Incl. Ref. #1 thru 12 1 11ADS243B
1 TUBE-INTERCOOLER (Upper) 3 9ADS243 11ADS243
2 TUBE-INTERCOOLER (Lower) 3 9ADS243 11ADS243
*
3 HEADER-INTERCOOLER 1 8ADR476A
4 ELBOW-PIPE STREET 1 64D10 64D1O
5 COCK, Drain 2 90WI 9owl
6 PLUG -CSK. , Pipe 2 64B4 64B4
7 HEADER -INTERCOOLER 1 7ADR476A
8 BRACE, Intercooler Tube 2 ADR613 ADR613
9 SCREW, Intercooler Tube Brace 8 75A183 75A183
10 SPACER, Intercooler Tube Brace 8 80A52 80A52
11 NUT, Tube Brace 8 50B1 50B1
12 WASHER, Tube Brace 8 95B1 95B1
1-1-509 Page 16
QTY. MODELS
REQ. ADR1OOO
PER thrulOll
NAME OF PART COMP. ADRA1OOO
UNLOADER PIPING
QTY.
REQ. MODELS MODELS
PER ADR1013 ADR1014
NAME OF PART COMP. ADRA1OO1 ADRA1OO2
UNLOADER PIPING
GASKETS
1-1-509 Page 17
PISTON RINGS
QTY. ALL
REQ. ADR &
PER ADRA
NAME OF PART COMP. MODELS
PART NO.
I
cYLINDER
ORE
CYLINDER BORE
OPPRESSION
COMPRESSION
INGS
RINGS
IL CONTROL
ING
75687
L CONTROL 1
NG
BE SURE IDENTIFICATION
MARK ON CAST IRON
RING IS TOWARD TOP
OF PISTON
L. P. Piston Rings
1-1-509 Page 18
Litho in U.S.A. 12C-5-79
n@J
SALES
GARDNER-DENVER