Professional Documents
Culture Documents
Version 2.1
Prepared by
Index Date Evolution
Initials Visa
- The self-contained lantern is equipped with one or 2 batteries that must be handled with care and
recharged periodically in order to function properly. See GISMAN's recommendations in this document
in the Maintenance section.
- Programming and installation of this type of equipment must be carried out by qualified personnel in
accordance with local regulations.
- Gisman SA may modify the contents of this manual without notice and shall not be liable for errors
contained herein.
- Please contact us for further information.
2 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
TABLE OF CONTENTS
1. GSC-3 INTRODUCTION .............................................................................................................. 4
1.1. IALA compliance............................................................................................................................................. 4
1.2. General overview ........................................................................................................................................... 4
1.3. Allard Correction ............................................................................................................................................ 4
1.4. Various configurations available .................................................................................................................... 4
1.5. Order code ..................................................................................................................................................... 5
1.6. Charge Port, Switch and GPS options ............................................................................................................. 5
1.7. Complementary items available on request ................................................................................................... 6
1.8. Main features ................................................................................................................................................ 7
1.9. Bluetooth® connectivity ................................................................................................................................. 7
1.10. Technical description ..................................................................................................................................... 7
2. STORAGE .................................................................................................................................. 8
3. FINAL SETUP............................................................................................................................. 8
3.1. Charge the battery ......................................................................................................................................... 8
3.2. Program the lantern ....................................................................................................................................... 8
3.3. Identify the best location and mount the lantern .......................................................................................... 9
3 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
1. GSC-3 INTRODUCTION
1.1. IALA compliance
The GISMAN GSC-3 lantern was designed and manufactured in accordance with IALA recommendations and
technical guidelines. GISMAN has been an active industrial member of IALA since 1966.
1.2. General overview
The GISMAN GSC-3 lantern is a compact, self-contained LED lantern equipped with 4 solar modules and
powered by a battery.
The lantern can be programmed using the GISMAN Bluetooth® application or an infrared programmer.
The lantern is equipped with a day/night cell allowing it to turn on at dusk and off at sunrise. Personalized
brightness thresholds can be set.
The GISMAN online solar calculator, hosted at https://calculator.gisman-web.com, can be used to confirm
the conditions of use of the lantern (range, flash code, options) according to its geographical location.
All scenariis can be configured in this tool, except if the lantern is programmed on a personalized flash
character, and/or if the lantern is programmed for day and night use. For these scenariis, please consult
Gisman if necessary.
1.3. Allard Correction
When a lantern is flashing, depending on the duration of the flash, the intensity must be increased to ensure
the visibility of the lantern at the required range. The value of the intensity peak is given by a formula called
Allard Correction. GISMAN designed the lantern so that the computation of this correction is automatic when
programming the lantern.
If the characteristics of the LED makes it impossible for the selected range to be reached, the user is notified
either by an absence of lantern return when using the Infrared programmer, or by an error message on the
GISMAN Bluetooth® mobile application.
In this case, he will have to reduce the intensity of the lantern or choose another flash code (with a longer
flash).
1.4. Various configurations available
Two battery configurations are available: 4Ah or 8Ah, which offers a longer autonomy.
Two battery technologies are available: the standard Lead Acid battery, and the Lead Crystal battery. It uses
a particular type of electrolyte that crystallizes over the course of the cycles which offers superior
performance. Thus, it can be charged 40% faster, accepts deep discharges without irreversible damage (down
to 0V under certain conditions).
In addition, three cumulative options are offered with the lantern:
- GPS: Allows to synchronize the flashes of several lanterns
- CP: Charge Port to (re)-charge the battery quickly without having to expose the lantern to sunlight. GISMAN
offers an external power supply - see complementary article
- SW: SWITCH – allows to completely turn off the lantern for a long storage
4 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
5 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
6 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
It comes standard with a Bluetooth® module for up and down connectivity, plus a feature allowing the
wireless firmware update "OTA - Over The Air" via the GISMAN Bluetooth® application, in order to benefit
from the latest features.
It also has a wide range of pre-programmed flash characters and offers the possibility to program a
personalized one.
The three options (GPS, CP and SW) are available as from the GSC-3 range and several complementary items
are offered in order to facilitate start-up and to optimize maintenance in operational conditions.
1.9. Bluetooth® connectivity
The GISMAN lanterns are all equipped with a Bluetooth® module that allows connectivity:
- Downward: programming the lantern on a smartphone or tablet via the GISMAN Bluetooth®
application
- Upward: Via the GISMAN Bluetooth® application, the lantern can send back operating information to
the GISMAN A2NGO web platform and offer optional functionalities for monitoring and
maintenance.
7 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
The GSC-3 lantern is made of a colored injected base that indicates the color of the lantern, a transparent
injected envelope that houses the solar panels and a gasket.
The batteries are held in place by a 316L stainless steel flange.
2. STORAGE
If the lantern is to be stored for a long time, it must be kept out of its packaging and exposed to direct sunlight,
without masking or windows. Check battery voltage regularly to avoid excessive discharge.
The Switch option, switched to the OFF position, enables short-term storage without exposure to direct
sunlight.
3. FINAL SETUP
3.1. Charge the battery
If the lantern comes with the SW (switch) option, turn the switch to the ON position.
To charge the battery, expose the lantern to sunlight for several days or use the Charge Port (optional) with
the external power supply (complementary item).
Before setting up the lantern to its final location, use the GISMAN Bluetooth® application or the IR
programmer to ensure that the battery is sufficiently charged. The battery's open circuit voltage must be at
least 6.2 volts.
8 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
9 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
5. MAINTENANCE RECOMMANDATIONS
5.1. Foreword: A2NGO Maintenance
The A2NGO Maintenance software, designed by Gisman and available as an option, offers the following
features:
- Set up, plan, and monitor maintenance operations and maintenance plans
- generate and archive intervention reports
- compute AtoN service rates in accordance with AISM recommendations
Please feel free to contact your distributor or Gisman for more information.
5.2. IALA Maintenance recommendations
Gisman lanterns require little or no maintenance, just a regular general visual inspection, cleaning, and
battery charge check.
In all cases, Gisman recommends that a maintenance strategy be implemented in accordance with the IALA
maintenance recommendations:
- 1077 - Maintenance of Navigation Aids
- 1151 - Maintenance of Aids to Navigation structures
5.3. General visual inspection
Visual check of the flash character and intensity of the lantern
Check of the fixation of the lantern, check of the integrity of the anti-bird spikes
Check of the general cleanliness, especially of the optics and the solar panels
Check of the integrity of the AIS antenna, if applicable
5.4. Cleaning
Cleaning of the solar panels and the lens with a clean cloth and fresh water, no sea water, no detergent, no
solvent.
5.5. Battery charge check
Check the battery charge status via IR remote control, GISMAN Bluetooth® application or on your A2NGO
Monitoring portal (if you have the appropriate subscription). As a reminder, the GISMAN Bluetooth®
application uses a color code to indicate the battery's state of charge:
- Green: nothing to report
- Orange: investigate in search of a potential defect
- Red: consider replacing the battery
Reminder:
If you have an A2NGO Monitoring subscription, scanning the lantern with the GISMAN Bluetooth® application
allows you to upload and store data on the A2NGO server, which also allows you to review the battery's
charge status history.
10 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
6. BATTERY CHANGE
Note: work in a clean, dry environment and ensure that there is no moisture or splashes within the envelope
during operation.
Step Action
Unscrew and remove the transparent cover. If necessary, use the safety screwdriver (see §1.6)
1.
⚠ Do not pull the Battery, Charge Port (Option) and Switch (Option) cables.
Disconnect the black battery connector by pressing the tab (see photos below)
2. ⚠ In the case of Charge Port and/or Switch, do not disconnect them, or locate them before disconnecting
them
3. Remove the stainless-steel flange and remove the battery
4. Make sure the replacement battery is fully charged (see §2.4)
Ensure that the replacement battery is fitted with its black connector with its cables pre-soldered to the
5.
battery terminals
6. Insert the new battery
7. Screw on the stainless-steel flange
8. Reconnect the new battery via the black connector
9. Make sure that the lantern is working properly after connecting the new battery
10. Make sure the cables are not bent, stretched or pinched before closing
Make sure the gasket is properly seated in its slot, considering its asymmetry (the O-ring is pre-formed to fit
the corners of the enclosure).
⚠ It should not be pinched and no dust should be present on the gasket seating surfaces. Change the gasket
11.
if necessary.
Hold the envelope point down and place the base on the envelope, to prevent the gasket from falling off by
gravity.
12. Screw on the transparent cover
11 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
The lantern is not starting The lantern is in standby mode Wake up the lantern (see Quick
Start Guide, GISMAN Bluetooth®
application user manual, or IR
programmer manual)
The lantern does not switch The brightness value detected by the day/night Check the value detected by the
on at dusk / The lantern does cell has not yet reached the trigger threshold photocell in the GISMAN
not switch off at sunrise Bluetooth® application, wait a few
moments or adjust the trigger
threshold if necessary
The lantern is not starting or The battery voltage is too low Charge or replace the battery
is shutting down
Impossible to wake up the The Switch (Option) is turned on Turn off the switch
lantern
The battery does not charge Solar panels are obstructed Clean the transparent cover of the
lantern, especially in front of the
solar panels, with a clean cloth
and clear water
The battery does not charge Wrong wiring Make sure that steps in §6 have
after replacement been respected, especially check
the wiring
Impossible to mount the The lantern is designed to be mounted with 4 Use the 150/200 adapter plate
lantern on its support M6 screws on a Ø150mm diameter, while the (complementary item, see §3.3)
support is designed to be mounted on a
Ø200mm diameter.
Light intensity is lower than Low battery voltage and "Smart Autonomy Charge or replace the battery
usual Management" mode activated
The light is not visible enough The lens is obstructed Clean the optics with a clean cloth
for boats and clear water
The flash code I have According to Allard's correction formula, the Reduce the intensity of the light or
programmed is not accepted characteristics of the LED do not allow to reach change the flash code for longer
by the lantern the selected range. flashes
Humidity in the lantern The silica bag is degraded or missing. Replace the silica bag
12 / 13
USER MANUAL
SELF-CONTAINED LED LANTERN
GSC-3
Impossible to open the The lantern has been mounted with the Use the security bolt screw driver
lantern SECURITY-BOLT-KIT
13 / 13