Professional Documents
Culture Documents
Okamoto Corporation
370 Corporate Woods Pkwy, Vernon Hills, IL 60061
(847) 235-3500
1
Okamoto Precision Surface Grinding Machine ------------------------- Model ACC-12•24GX
Three Axis Fully Automatic Grinding with Rough/Fine Grinding and Spark-out
in Automatic Cycle------------------------------------- Grinding Capacity 12” x 24”
Standard Accessories
2
ACC-GX Control
The GX control provides Grinding
Versatility, Quick Set-Up, Precise
Control, Convenience and long-
term Reliability. Control
functions are easily actuated by
push buttons or switches. Solid
state electronics assure precise
command execution for
consistent, repeatable accuracy
and performance
Machine Features
•Fully Automatic Cycle with Rough/Fine Grinding and Spark-Out in 1 Set-Up ... is controlled by MDI
Control and AC servo motor with rotary encoder. With the Rough/Fine Grinding and Spark-Out, this machine
is capable of excellent stock removal rates and surface finishes.
• User Friendly MDI Control ... MDI controller is made by Okamoto and uses a unique control system and
promotes easy set-up. Rough/Fine grinding and spark-out in 1 set-up.
3
• Servo Driven Wheel Vertical Feeds...accurate automatic downfeed in selectable increments from
0.00005” to 0.0015” (10 pre-set selection).
• Vertical Position Display...for ease of set-up. It also indicates wheelhead position in cycle.
• Incremental Feed Push Button with increments from 0.00005” to 0.0015” (10 preset selection).
• Double-Walled Column Construction... H-shaped guideways with 3 tapered gibs provide the strength
necessary for heavy duty grinding and the precision for
Top view extra fine grinding.
•Incorporated Cartridge Type Wheel Spindle...with super precision, pre-loaded angular contact bearings,
lubricated for life.
•Extended Saddle and Table Ways reduce overhang of the saddle and table at maximum limits to provide
long effective life of the built-in accuracy.
•Double Vee Way Table & Saddle Construction...providing true tracking, greater table load support and
longer life of built-in accuracy.
•Built-in Chuck Control...with variable holding power control and automatic release cycle.
•Automatic Lubrication...All GX Models utilize a proven Gravity Feed Automatic Lubrication System.
Lubrication oil is pumped to an oil reservoir located at the top of the column and is gravity fed to all guideway
surfaces and positioning screws.
•Vertical Infeed...driven by AC servo motor and high accuracy gear to ground precision lead screw
assembly.
4
Machine Specifications
Capacity:
Maximum Longitudinal Travel 29.5 inch
Maximum Cross Travel 13.3 inch
Maximum Distance under 12” Wheel to Top of Table 13.6 inch
Magnetic Chuck Size (WxL) 12 x 24 inch
Table Load Capacity (Includes Chuck Weight) 925 lbs
Table:
Hydraulic Feed Rate 1.0 - 82 ft/min.
Crossfeed:
Hydraulic Intermittent Crossfeed 0.02 - 0.8 inch
Hydraulic Continuous Crossfeed Rate 4 – 40 in/min.
Wheelhead:
Automatic Vertical Feed per Table Stroke 0.00005 - 0.0015 inch
Rapid Feed Rate 23.6 inch/min.
Manual Pulse Feed (x.0.1) 0.00001
(x1) 0.0001
(x5) 0.0005 inch
Grinding Wheel:
Size (DxWxB) 12 x 1.5 x 5 inch (12 x 1.5 x 3 Avail.)
Speed 1,800 rpm/60Hz.
Motors:
Grinding Wheel Spindle 5 HP
Hydraulic Pump 2 HP
Lubrication pump 0.1 HP
Vertical Rapid Feed & Downfeed 0.5 HP Servo (1632+ = .75 hp)
Power Supply: 10 KVA
Desired Power Supply including
Electro-Magnetic Chuck & Coolant System
Floor Space (LxWxH): 108x 89 x 73 inch
Net Weight: 6,830 lbs.
5
Machine Installation and Operator Training
Okamoto is offering one (1) day Free Machine Installation and Operator Training anywhere in the United
States. Please provide the following preparations before our engineer arrives at the customer.
1) Hydraulic Oil - Vactra #1 (Okamoto’s Recommended Oil) 26.5 Gallons
Note: Use of oil other than Vactra #1 may void the Okamoto warranty
Note:
Warranty: One (1) year on Labor and Parts per our warranty statement.
F.O.B.: Shipping Point (Vernon Hills, IL or Los Angeles, CA)
Delivery: Check Availability, Subject to Prior Sale.
Terms: Okamoto Standard
Note:
The contract will be terminated immediately at any time, if it becomes clear that the machine is
used or likely to be used for the development or manufacture of weapons of mass destruction,
such as nuclear weapons, biological weapons, chemical weapons, and missiles.
6
Machine Base Price
Model ACC-12•24GX
Okamoto Precision Surface Grinding Machine Grinding Capacity 12” x 24” @ $ 52,500.00
Optional Accessories
7
Optional Accessories_ ACC-12•24GX continued
A664 8” Higher Column * $ 7,000.00
FRZ5-230 Frequency Inverter for 5HP Wheel Motor (230V) $ 3,500.00
FRZ5-460 Frequency Inverter for 5HP Wheel Motor (460V) $ 4,850.00
FRZ10-230 Frequency Inverter for 10 HP Wheel Motor (230V) $ 3,800.00
FRZ10-460 Frequency Inverter for 10 HP Wheel Motor (460V) $ 7,400.00
C INTERLOCK Chuck Safety Interlock * $ 1,800.00
METRIC Metric Conversion* Consult Okamoto
A617 Radius Dressing Device (DRR-30) Consult Okamoto
A618 Side and Angle Dressing Device (DRA-5 / 50 mm stroke) Consult Okamoto
Multiple Safety Interlock Systems* Consult Okamoto
Full Enclosure */ **** $ 9,900.00
VACTRO1-5 Vactra#1 Oil 5 Gallon Pail $ 340.00
VACTRO1-55 Vactra#1 Oil 55 Gallon Drum $ 3,100.00
subject to market price