25 23 GPIO0 Pulled up OK [4] T1 ADC2_CH1 [5] Y Outputs PWM signal at boot 35 41 GPIO1 x OK [6] TX Y Outputs debug info at boot 24 22 GPIO2 OK OK T2 ADC2_CH2 [7] Y Y Connected to Wroom32 onboard LED 34 40 GPIO3 OK [8] x RX Y HIGH at boot 26 24 GPIO4 OK OK T0 ADC2_CH0 [9] Y Y 29 34 GPIO5 OK OK [10] Y [11] SS Y Y Outputs PWM signal at boot 14 18 GPIO12 OK [12] OK T5 ADC2_CH5 [13] Y Y Boot fail if pulled high 16 20 GPIO13 OK OK T4 ADC2_CH4 [14] Y 13 17 GPIO14 OK OK [15] T6 ADC2_CH6 [16]Y [17] Y Outputs PWM signal at boot 23 21 GPIO15 OK OK [18] T3 ADC2_CH3 [19]Y [20] Y Y Outputs PWM signal at boot 27 25 GPIO16 OK OK Y RX2 28 27 GPIO17 OK OK Y TX2 30 35 GPIO18 OK OK Y SCK 31 38 GPIO19 OK OK Y CTS CIPO 33 42 GPIO21 OK OK Y SDA 36 39 GPIO22 OK OK Y RTS SCL 37 36 GPIO23 OK OK Y COPI 10 14 GPIO25 OK OK ADC2_CH8 [21] Y DAC1 11 15 GPIO26 OK OK ADC2_CH9 [22] Y DAC2 12 16 GPIO27 OK OK T7 ADC2_CH7 [23] Y 8 12 GPIO32 OK OK [24] T9 ADC1_CH4 Y Modify WROOM to use as output https://www.esp32.com/viewtopic.php?t=2803 9 13 GPIO33 OK OK [25] T8 ADC1_CH5 Y Modify WROOM to use as output https://www.esp32.com/viewtopic.php?t=2803 6 10 GPIO34 OK [26] x ADC1_CH6 Input only. No pullup / pulldown. 7 11 GPIO35 OK [27] x ADC1_CH7 Input only. No pullup / pulldown. 4 5 GPIO36 OK [28] x ADC1_CH0 Input only. No pullup / pulldown. 5 8 GPIO39 OK [29] x ADC1_CH3 Input only. No pullup / pulldown.
ADC2 doesn't work when WiFi is in use
Template by Jonathan Oxer for SuperHouse Automation