Professional Documents
Culture Documents
Submitted by
VINODGOWDA G (1EW22MC059)
Ms. Kajal
Assistant Professor
Depatment of MCA
EWIT
CERTIFICATE
This is to certify that the Internship work entitled “WATER LEVEL MONITORING
SYSTEM”carried out by VINODGOWDA G (1EW22MC059) is a bonafide student at
East West Institute of Technology, has successfully completed the Internship work in
partial fulfilment as per the curriculum of third semester Master of Computer
Applications prescribed by the Visvesvaraya Technological University, Belgaum during
the year 2023-24.
1. ________________
2. ________________
DECLARATION
VINODGOWDA G Signature
(1EW22MC059)
ACKNOWLEDGEMENT
We are extremely happy to express our sincere gratitude to our college East West Institute
of Technology, Bangalore for allowing us to do the project. We consider it as a privilege to
place of our deepest sense of gratitude and sincere thanks to Dr. K Channakeshavalu,
Principal, E.W.I.T for his sincere co-operation and for providing necessary facilities to do
this project work undertaken by us. We are extremely thankful to express our sincere
gratitude to our respected Head of the Department, Prof. Praveen K S and our project
guide Mrs. Kajal, Assistant professor Department of MCA for their kind cooperation and
for providing valuable suggestions, guidance and constant encouragement for the
improvement and successful completion of this project. We express sincere thanks to teaching
Staff, Department of MCA, East West Institute of Technology for their support.
ABSTRACT
In urban areas the water supply to residence and commercial establishments are provided at a
fixed flow rate. In this project, it is proposed to develop an embedded based remote water
monitoring by recording the flow rates at the consumer/user end. In order to implement the
proposed water supply system, each consumer end should be provided with an embedded
based water flow monitoring system consisting of a microcontroller to record the flow rate
using a flow sensor and it is provided with an electrically operated solenoid valve to supply
water to the consumers. If the meter reaches the threshold value, then a bill will be generated.
In this PH and turbidity sensor is used to check the purity of water and for detecting the
contamination, proximity sensor has been used and the level sensor is used to check the rain
water present inside the tank. The rain water harvesting is done and it is supplied to the main
tank with the help of Pump. In this work it is proposed to develop an embedded based remote
water monitoring and Leakage prevention system by recording the flow rates at the
consumer/user end. All the information is delivered to the customers through Wi-
Fi/NODEMC.
CONTENTS
1. INTRODUCTION 1
1.1 Project Overview 1
1.2 Problem Description 1
1.3 Objective 2
2. LITERATURE SURVEY 3
2.1 Existing System 3
2.2 Proposed System 3
2.3 Application 3
2.4 Tools and Technologies Used 4
3. REQUIREMENTS SPECIFICATION 10
3.1 Functional Requirements 10
3.2 Non-Functional Requirements 10
3.3 Software and Hardware Requirements 11
3.3.1 Hardware Requirement 11
3.3.2 Software Requirement 11
4. SYSTEM DESIGN 12
4.1 Use Case Diagram 12
4.2 Block Diagram 13
4.3 Circuit Diagram 14
5. IMPLEMENTATION 15
5.1 Code Used in this Project 15
5.2 Blynk IOT App 17
5.3 Results 19
6. SOFTWARE TESTING 20
6.1 Levels of Testing 20
6.2 Test cases 21
7. CONCLUSION 23
8. FUTURE ENVHANCEMENTS 24
BIBLIOGRAPHY 25
LIST OF FIGURES