You are on page 1of 2

Multicrest

N3060
TM

fire alarm system

PCA-N3060-LDM
LED Driver Module

Features
• UL 864, 9th edition listed
• 32 LED driver outputs for zone status indications
• Consecutive or random zone number assignment available
• Audible alarm device (Built-in buzzer)
• Power supply status LED and signal transmission status LED
• LED driver output test
• Easy installation

Description
The PCA-N3060-LDM is a kind of remote annunciator that is equipped with 32 LED driver outputs. The PCA-N3060-LDM is designed to be used
for custom-made mimic panels and any devices that require zone status outputs.

The PCA-N3060-LDM activates its LED driver outputs when any initiating device is activated in the corresponding zones to inform the remote
system operator of zone statuses. Assignment of zones for the 32 LED driver outputs can be set by the PC-based Configuration Program.

The PCA-N3060-LDM activates its built-in buzzer when any LED driver output is activated. The buzzer can be silenced by shorting the TB5
(Buzzer off), so that the installer connects a typical on/off latching switch to the TB5 when installing PCA-N3060-LDM.

The LED1 on the PCA-N3060-LDM flashes while the signal transmission between the FACP and the PCA-N3060-LDM is being established.

The PCA-N3060-LDM has a test function. Pressing SW1 on PCA-N3060-LDM continuously for 5 seconds activates all the LED driver outputs for
a test.

Each remote annunciator has a remote annunciator number for its identification in the system. The remote annunciator number is set by the rotary
switches on PCA-N3060-LDM.

The system supports NFPA Class B (Style 4) wiring and the maximum length of 1.2 km (4000 ft) for annunciators. The panel supports a maximum
of 30 remote annunciators.

The PCA-N3060-LDM requires 24 VDC input power to operate. The 24 VDC input power can be derived from the FACP or a remote power supply.
The internal power supply converts the 24 VDC input power to 3.3 volts for use of the internal circuitry.

Ordering Information
Part No. PCA-N3060-LDM

Specifications
No. Item Specification
1 Maximum 24 VDC current 370 mA
2 Ambient operating temperature range 0 to 49 °C (32 to 120 °F)
3 Maximum RA bus length 1.2 km (4000 ft)
4 Max. RA bus wiring resistance 40 Ω
5 Max. RA bus wiring capacitance 0.4 μF
6 Applicable baud rates of RA-Bus 2400, 4800, and 9600 bps
7 Annunciator bus wiring style NFPA Class B (Style 4)
8 Maximum annunciator 30 units
9 Annunciator connection RS-485
10 Dimensions 110 mm (4.33”)(H) x 185 mm (7.28”)(W) x 15 mm (0.59”)(D)
Installation and Wiring Information

185 mm (7.29inches)

L1 C1+ L2 L3 L4 L5 L6 L7 L8 L16 L15 L14 L13 L12 L11 L10 L9

5 mm (0.19 inches)
1
TB1
1

+24VDC-
100 mm (3.94 inches)

110 mm (4.33 inches)


4.0 mm (0.16 inches) hole 4 places

TB3

Annuciator Number + RS-485-


RSW RSW 1
JP1

5 mm (0.19 inches)
×1
1
BZ1

×10
SW1

2
1

DSW
BUZZER OFF

1
1
TB5

TB2

C2+ L17 L18 L19 L20 L21 L22 L23 L24 L25 L26 L27 L28 L29 L30 L31 L32

175 mm (6.89inches) 5 mm (0.19 inches)

5 mm (0.19 inches)

Depth =
17.70 mm (0.70inches)

To the next annunciator or LED Drive Module

TB3
24 VDC (+)
+

24 VDC (-) DC24V


-
RS485 +
+
RS485 - RS485
-

Annunciator or LED Drive Module


TB4
Power Limited

Power Supply Board


(PCA-N3060-PSU)
ANNUNCIATOR
AUX+ AUX-
+ -

L1 L2 L16 C1+ L17 L18 L32 C2+

TB1 TB2

NOTE
・The information contained herein does not purport to cover all the details or variations of the equipment described, nor to provide for every
possible contingency that may be met in connection with its installation, operation or maintenance.
・Specifications are subject to change without notice. Contact Nohmi before relying on the information.
・Actual performance is based on proper application of the product by a qualified professional.
・Should further information be required or should particular concerns arise that are not covered sufficiently for the purchaser’s purposes, the
matter should be referred to Nohmi or your nearest distributor.

Contact

• Head Office: 4-7-3 Kudan-Minami, Chiyoda-ku, Tokyo


102-8277, Japan
• Phone: (81) 3 - 3265 - 0231
• F A X: (81) 3 - 3265 - 5348
URL https://www.nohmi.co.jp/english/

Catalog Number 180810Ⓓ-F-18301

You might also like