You are on page 1of 25

SN Items UoM Qty

1 2 MP PTZ camera. Nos 2


2 5MP IR Bullet Camera Nos 2
3 2MP Automatic Number Plate Recognition (ANPR) Camera Nos 2
4 Industrial Managed POE+ 8 port switch with 1G SFP module. Nos 4
5 Solar Power Panel Set 1
6 16 Channel NVR with storage 24 TB Nos 1
7 Cat6/UTP Cable 305 Mtrs Box 2
8 24 Inches Display Monitor Nos 1
9 RJ45 connectors Box 2
10 CAT 6 Patch Cables Nos 10
11 OFC Single Mode Optical Fibre Mtrs 1000
12 LIU for 12 Fiber Nos 4
13 LC-SC Duplex Patch Cords Nos 10
14 CCTV Outdoor Pole Rack ( 6U) Nos 4
15 6U IT- Indoor Rack Nos 1
16 GI Pole 6Mtrs Nos 4
17 HDPE PIPE Mtrs 500
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
1 2 MP PTZ camera.
1.1 Image sensor Type CMOS
1.2 Image sensor size ([ini]) >= 0.357

1.3 Camera image sensing capacity (picture mode) >= 2 MP

1.4 Resolution >= Full HD (1920 X 1080 Pixel)


1.5 Day: night capable 1
1.6 IR illumination range (mtr) >= 150
1.7 Focal Length (mm) 4.3-129
1.8 Frame rate (fps) >= 30
1.9 Video compression H.264
1.10 Video streaming Triple Compressed Stream
1.11 Audio Support 1
1.12 Alarm Support 1

Minimum illumination for capturing colour image


1.13 <= 0.001
(Ix)

1.14 Wdr (wide dynamic range) 120 / 120 Db True WDR / 140 Db
1.15 Snr (signal to noise ratio) 50-60
1.16 Auto exposure Audio Level Control
1.17 Supported protocols DHCP
1.18 SD card memory(GB) >= 256
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
1.19 Installation type Outdoor
1.20 Material of the housing construction Aluminium
1.21 Type of camera housing Dome camera
1.22 IP camera Yes
1.23 PTZ camera Yes
1.24 Pan speed (deg/sec) >= 200
1.25 Optical zoom >= 25X
1.26 Digital Zoom >= 16X
1.27 Tilt Speed (deg/sec) >= 120
1.28 Tilt range above horizontal (deg) 0 To 15 Degree
1.29 On VIF support Yes
1.30 OEM Warranty >= one year
1.31 Required QTY 2
1.32 UoM Nos.
2 5MP IR Bullet Camera
2.1 Image sensor Type CMOS

2.2 Camera image sensing capacity (picture mode) >= 5 MP

2.3 Resolution >= 5 MP (2592 X 1944)


2.4 Day: night capable 1
2.5 IR illumination range (mtr) >= 50
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
2.6 Focal Length (mm) >=3.6
2.7 Frame rate (fps) >= 30
2.8 Video compression H.265+
2.9 Video streaming Triple Compressed Stream
Minimum illumination for capturing colour image
2.10 <= 0.001
(Ix)
2.11 Wdr (wide dynamic range) >= 120 Db
2.12 Snr (signal to noise ratio) 50-60
2.13 SD card memory (GB) >= 256
2.14 Installation type Outdoor
2.15 Material of the housing construction Aluminium
2.16 Type of camera housing Bullet Camera
2.17 IP camera Yes
2.18 Digital Zoom 16X
2.19 Tilt Speed (deg/sec) 120
2.20 Tilt range above horizontal (deg) 0 To 15 Degree
2.21 OEM Warranty >= one year
2.22 Required QTY 2
2.23 UoM Nos.
3 2MP Automatic Number Plate Recognition (ANPR) Camera
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
3.1 Image sensor Type CMOS
3.2 Image sensor size ([ini]) >= 0.357

3.3 Camera image sensing capacity (picture mode) >= 2 MP

3.4 Resolution >= Full HD (1920 X 1080 Pixel)


3.5 Day: night capable 1
3.6 IR illumination range (mtr) >= 40
3.7 Lens Type Motorized Verifocal
3.8 Focal Length (mm) 2.8 - 12
3.9 Focus Mode Manual and Auto
3.10 Frame rate(fps) >= 30
3.11 Video compression H.264,MJPEG,H.265+
3.12 Video streaming Triple Compressed Stream
3.13 Audio Support 1
3.14 Alarm Support 1

Minimum illumination for capturing colour image


3.15 <= 0.001
(Ix)

3.16 Wdr (wide dynamic range) >= 120 Db True WDR


3.17 Snr (signal to noise ratio) 50-60
3.18 Auto exposure Audio Level Control
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
3.19 Supported protocols DHCP
3.20 SD card memory (GB) >= 256 GB
3.21 Installation type Outdoor
3.22 Material of the housing construction Aluminium
3.23 Type of camera housing Bullet camera
3.24 IP camera Yes
3.25 Digital Zoom 16X

Automatic Number Plate Recognition, Motion


3.26 Support Features Detection, Video Analytics, Video tamper
detection, Auto Gain Control,

Required license for support of functions


3.27 License Automatic Number Plate Recognition is in the
scope of the bidder.
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

Bandwidth utilization, UPNP based port


forwarding, Protocols: IPv4, IPv6, TCP/IP,
SNMP, HTTP, HTTPS, UPnP, RTSP, RTP,
3.28 Network functions
RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS,
DDNS, PPPoE and 802.1x system compatibility:
ONVIF support.

Multi-level user access with password protection,


3.29 Security 802.1X port-based authentication for network
protection, Protection: IP 66 weather proof.

Operating conditions: -10°C ~ 50°C Humidity


3.30 General 90% or less (non-condensing), Input Power
supply: DC 12V ± 10% 60w WITH IR ON

3.31 Max Power Consumption <= 60 W


3.32 OEM Warranty >= one year
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
3.33 Required QTY 2
3.34 UoM Nos.
4 Industrial Managed POE+ 8 port switch with 1G SFP module.
4.1 Type of switch Managed / Web Managed Switch
4.2 Technology POE+
4.3 No. of 1G ports >= 8
4.4 No. of 1G SFP Ports >= 2
4.5 Switching capacity Non-blocking >= 20 Gb

IPv6 Neighbor Discovery, 124 IPv4 static route


4.6 Basic Layer 3 features entries
50 IPv6 static route entries , 4 Interfaces.

802.1X Authentication, ARP Inspection, Traffic


4.7 Security Features segmentation, SSH v2, TLS v.1.2, DoS attack
prevention
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

ICMP v6, IPv4/v6 Dual Stack, RMONv1,


4.8 Management Protocol Trustedhost, Dual image, Dual configuration,
Web GUI, Compact CLI

Band width control, 802.1p QOS, weighted round


4.9 QOS
robin (WRR)

4.10 PoE Budget <= 65 Watt

Power supply: 220 V,


4.11 General
Operating Temperature - 10 to 50 degree C

4.12 OEM Warranty >= one year


4.13 Required QTY 4
4.14 UoM Nos.
5 Solar Power Panel
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

Solar panel with minimum output power 2KW


and inverter with battery bank for 48 Hrs power
5.1 Features
back up for CCTV camera system and its
accessories

Capacity: 2KW, Off-grid rooftop solar power


5.2 General systems. photovoltaic panel with a maximum
output of 2000 watts

Passivation emitter rear contact cell (PERC)


5.3 PV Panel Type
crystalline solar panels

2 KW Solar Hybrid Inverter with MPPT based


5.4 Inverter
Technology
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

5.5 PV Panel size 540 W or as per site requirement to achieve 2 KW

5.6 Maximum Power >= 2000 Watts


5.7 Solar DC cable >= 4 sq for >= 100Mtrs

5.8 Mounting Structure Mounting structure with 3 Ft height - 1 unit

Exide 100 AH Battery - 2 Nos / As per site


5.9 Battery System
requirement for 48 hrs back.

5.10 Warranty As per OEM standard.


5.11 Required QTY 1
5.12 UoM set
6 16 Channel NVR with storage 24 TB
6.1 Type of Recorder NVR
6.2 Total Number of Input Channel >= 16
6.3 Number of IP Based Video Channel >= 16

6.4 Maximum recording Resolution Supported >= 4K (3840*2160)


Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
Maximum Number of Cameras Viewed on Single
6.5 >= 16
Display (fps)
6.6 Recording Speed for all Channel (fps) <= 30
6.7 Hard Disk Provided Yes (inclusive in the scope of supply)
Total Storage capacity (TB) of the Hard disk
6.8 24 TB
provided
6.9 OEM Warranty >= one year
6.10 Required QTY 1
6.11 UoM Nos.
7 Cat6/UTP Cable
7.1 Cable category CAT6 U/UTP
7.2 Cable Colour Blue
7.3 Length of Cable in a bundle (mtrs) >= 305 Mtrs
7.4 Cable Jacket Material Fire Retardant PVC
7.5 UI marking on cable Yes
7.6 OEM Warranty >= one year
7.7 Required QTY 2
7.8 UoM box
8 24 Inches Display Monitor
8.1 Panel Type In Plane Switching (IPS)
8.2 Brightness (nits) >= 300
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
8.3 Aspect Ratio 16:10
8.4 Resolution Pixel >= 1920*1080 (FHD)
8.5 Technology LED Backlit
8.6 Screen Size (diagonal) cm 53.5-55.5
8.7 OEM Warranty >= one year
8.8 Required QTY 1
8.9 UoM Nos.
9 RJ45 connectors

RJ45 connectors for termination of Camera


9.1 Connector Type
LAN / UTP cable

9.2 Required QTY 2


9.3 UoM box
10 CAT 6 Patch Cables
10.1 Patch Cord Type Cat6 F/UTP
10.2 Length of Patch Cords meter >= 2
10.3 Cable Jack Material Low smoke zero Halogen (LSZH)
10.4 Storage Temperature Range -20 Deg.C To +60 Deg.C
10.5 Operating Temperature Range 20 Deg.C To +60 Deg.C
10.6 UI Making on Cable Yes
10.7 OEM Warranty >= one year
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
10.8 Required QTY 10
10.9 UoM Nos.
11 OFC Single Mode Optical Fibre
11.1 Type of tube Unitube 1/6
11.2 Fiber Count >= 6
11.3 Jacket Material HDPE

Single Mode OS1, Operational wevelength


11.4 Fiber Type
1310nm to 1550nm, 9/125um (OS1).

11.5 Operating Temperature Range -10 to +60 Deg.C


11.6 Storage Temperature Range -10 to +60 Deg.C
11.7 OEM Warranty >= one year
11.8 Required QTY 1000
11.9 UoM meter
12 LIU for 12 Fiber
12.1 LIU Type Rock Mounted
12.2 Height of patch panel 1U
12.3 Number of ports >= 12
12.4 Adapter LC
12.5 OEM Warranty >= one year
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
12.6 Required QTY 4
12.7 UoM Nos.
13 LC-SC Duplex Patch Cords
13.1 Connector Type, Connector end A LC
13.2 Connector Type, Connector end B SC
13.3 Cable Type Duplex
13.4 Fiber Type Single Mode 9/125 micron
13.5 Cable Size outer Dia (in mm) >= 2
13.6 Cord Length in m >= 2
13.7 Cable Colour Yellow
13.8 Operating temperature -10 Deg.C + 60 Deg.C
13.9 Connector insertion Loss, max. (in db) <= 0.3

13.10 Material of ferrule Zirconia ceramic, preRadiused And Pre Polished

13.11 Description of item Fiber Optic Patch Cord optical Fiber Cabling

13.12 OEM Warranty >= one year


Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

13.13 Required QTY 10

13.14 UoM Nos.

14 CCTV Outdoor Pole Rack


14.1 Size of server rack enclosure 6U
14.2 Type of Server racks Rack Enclosures
14.3 Front Glass door Yes
14.4 Type of glass used in front door Transparent Toughened Glass

14.5 Cable channel in rear side for cable management Yes

14.6 Pdu Power strips yes


14.7 OEM Warranty >= one year
14.8 Required QTY 4
14.9 UoM Nos.
15 6U IT- Indoor Rack
15.1 Size of server rack enclosure 6U
15.2 Types of server racks Rack enclosures
15.3 Depth of the Rack (mm) Up to 450
15.4 Mount type Wall mount
15.5 Type of Glass used in Front Door Transparent Toughened Glass
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response
15.6 Material used for rear Door CRCA Steel

15.7 Support cable entry from Top or Bottom Yes

15.8 PDU Power Strips yes


15.9 OEM Warranty >= one year

15.10 Required QTY 1

15.11 UoM Nos.

16 GI Pole
Cylindrical / Tubular Pole with minimum size
16.1 Type of pole
3.5 (inches) dia.
16.2 Mounting bracket yes
16.3 Finish Galvanized
16.4 Type of fixing With Base Plate
16.5 Pole: Mast height(m) >= 6
16.6 OEM Warranty >= one year
16.7 Required QTY 4
16.8 UoM Nos.
17 HDPE PIPE
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

HDPE Pipes are ideal suited for ducts for


17.1 General
underground laying of fiber optic cables.

17.2 Size 40mm, 50mm or higher

17.3 Wall thickness wall thickness varying from 2.5mm to 3.8mm

17.4 Strength and Flexibility Suitable for underground OFC cable laying.

17.5 OEM Warranty >= one year


17.6 Required QTY 500
17.7 UoM Meter
18 Scope of work

Successful bidder shall supply install and commissioning of the CCTV surveillance system, solar
18.1
panels and other accessories at NTPL as per the bill of items and Technical specifications above
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

Above items shall be supplied, installed and commissioned at Ash Pond Melapandipuram site
18.2
location as per the requirement of NTPL.

18.3 Successful bidder shall depute persons for installation and commission of above equipment at site

Loading, unloading and shifting of item up to desired place will be in the scope of successful bidder
18.4 including transportation of materials from NTPL site to installation site is in the scope of successful
bidder

Optical fibre cabling from the Ash Pond site control room to camera locations is in the scope of
18.5 successful bidder. The laying of LAN, power cable from camera building location to camera is in the
scope of successful bidder.

Supply of Network components and accessories needed for fixing of cameras, solar power panel as
detailed above. Supply of any left-out material required for installation of the camera system and
18.6
structured cabling like screws, RJ45, flexible PVC conduits, clamps, bolts, power sockets, power
cables, etc. shall be under the scope of the supplier.
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

Any equipment found defective or not conforming to above specifications will be rejected and the
18.7
same shall be replaced at free of cost by the bidder

18.8 The evaluation of bid shall be on package basis only.

Installation & commissioning charges including supply of necessary accessories such as bolts, nuts,
18.9
clamps, PVC pipe, 2.5 sq mm power cable and connectors as per tender specification

19 Have you read and accepted the technical specifications in points 1 to 17 above?

20 Schedule for completion of scope of contract within 60 days from date of contract

Place:

Bidder’s signature
Date:
Form 1 - Technical schedule
GeM bid No.:
Bidder
SN Parameter Specifications Bidder remarks
response

Bidder’s company seal


Note:

1) If there are any differences in the specification / questionaire / description text between the filled schedule submitted by bidder, and the
schedule template (parent document), the the specification / questionaire / description text in the schedule template (parent document) shall
prevail.

2) Bidder’s own terms and conditions, deviations indicated elsewhere will not be considered for evaluation.
FORM 2 - Commercial schedule

GeM bid No.:

S.No. Specification Bidder response Bidder remarks

Have you accepted GeM General


1
Terms and Conditions (GTC)?

Have you accepted all Additional


2 Terms and Conditions (ATC) of this
bid?
Have you accepted bid offer validity, as
3
per enquiry?
4 GSTIN number

Place:

Bidder’s signature

Date:

Bidder’s company seal

Note:

1) If there are any differences in the specification / questionaire / description text between the filled
schedule submitted by bidder, and the schedule template (parent document), the the specification /
questionaire / description text in the schedule template (parent document) shall prevail.
2) Bidder’s own terms and conditions, deviations indicated elsewhere will not be considered for
evaluation.
FORM 3 - Deviation schedule

GeM bid No.:

S.No. Document name, clause number, and clause Bidder’s deviation

Place:

Bidder’s signature

Date:

Bidder’s company seal

Note:

1) If there are any differences in the specification / questionaire / description text between the
filled schedule submitted by bidder, and the schedule template (parent document), the the
specification / questionaire / description text in the schedule template (parent document) shall
prevail.
2) Bidder’s own terms and conditions, deviations indicated elsewhere will not be considered for
evaluation.
FORM 4 - Checklist
GeM bid No.:

S.No. Document to be attached along with bid submission Attached? Bidder remarks

Duly filled, signed and stamped technical schedule (format


1
attached in enquiry, FORM 1)

Duly filled, signed and stamped commercial schedule


2
(format attached in enquiry, FORM 2)

Duly filled, signed and stamped deviation schedule (format


3
attached in enquiry, FORM 3)

4 Copy of bidder's PAN


5 Copy of bidder's GST registration certificate
6 Copy of Cancelled Cheque

Duly filled, signed and stamped payment mandate form


7
(format attached in enquiry, FORM 5)

8 Malicious code certificate, as per ATC

Proof of being manufacturer of offered product, or


9
manufacturer authorisation, as per ATC

Duly filled, signed and stamped local content certificate


10
(format attached in enquiry, FORM 6)

11 Any other document sought in bid ATC, or corrigendum

Place:
Bidder’s signature
Date:

Bidder’s company seal


Note:
S.No. Document to be attached along with bid submission Attached? Bidder remarks

1) If there are any differences in the specification / questionaire / description text between the filled
schedule submitted by bidder, and the schedule template (parent document), the the specification /
questionaire / description text in the schedule template (parent document) shall prevail.
2) Bidder’s own terms and conditions, deviations indicated elsewhere will not be considered for
evaluation.

You might also like