12 CHANNEL TELE-ECG DEVICE USER MANUAL Aksharaarka Enterprise Private Limited, H.No: 1-2-288/14/1, Domal Guda, Opp. Indian Gas Gowdown Hyderabad - 500029, Telangana, India raghavi9@gmail.com, aksharaarka@gmail.com Mobile: 99590 45969, 94405 32011 www.aksharaarka.com, www.aksharaarka.co.in CIN No: U74999TG2016PTC111776, GST No: 36AAOCA7233L1Z9, IEC Code: AAOCA7233L Tele-ECG Device Micro USB Charging Pin The LED color changes as per the Different capacity of the Battery Red: Low Battery Control Signals Orange = Half Battery Green Full Battery
After releasing the finger from
the Power switch, the Bluetooth LED starts blinking. Once you Establish the Bluetooth Hold the power Switch for 3 - 4 seconds connection with ECG Android and when blinking stops release the Application the Blinking of finger to switch on the ECG Device. Bluetooth LED will stop, Indicating During using the ECG device you check the pairing between ECG device the battery power capacity with these and ECG Android Application. led indication Red: Low Battery Orange = Half Battery ECG Cable connection Port Green Full Battery Copy / Download BARC Tele-ECG Application or ARKA TeleECG Application in Android Mobile or Tab.
Install the ECG
Application, and after Installation the APK shows the following Icons on the Mobile Screen Switch ON the ECG Device by pressing the Power button for 3-4 seconds and release the power button after power LED stops blinking. The Bluetooth LED starts blinking on the ECG device. ON the Bluetooth connection in the Android Mobile. Open the ECG APK and you see different Bluetooth devices on the mobile screen. Select ARKALIFE and pair the ECG device. Once the ECG device is paired, the Bluetooth blinking on the ECG device stops, showing the pairing of ECG Device with Android Mobile. To record new ECG, you have to select NEW ECG option. LOAD DATA : The saved ECG reports can be viewed on screen. REPORTS: The save reports will be displayed in PDF format. SETTINGS: Before using ECG odevice, you can change the settings, Doctor's name and Contact Number. HELP: You can locate the where ECG reports are saved. Most of the time, we will be using the options like, MODE, Doctor's Information and Contact number. To check the working of ECG device any time, you have to select Mode in TEST and Save. In Test mode you see the follwing waveforms. when you select TEST mode, it will prompt the following message on the screen and select OK. To see the TEST waveforms, press PLAY Button - GREEN on the top corner. To save the report you need minimum 20 seconds of data. After 20 seconds the GREEN button turns RED, means you have sufficient data to save the report. Press RED button to stop the TEST signals on the screen. RED button turns GREEN, in this stage you record the TEST signals again if needed. To save the TEST or ECG report, you have to click on Generate button and select ok to enter the data. When you select Generate report and press OK, the following options will be displayed on the Screen. You can input the data in each menu and save the report. The saved TEST or ECG reports will be by default saved in PDF format. After entering the details and saving, it will ask for the option to open the recorded report in PDF or print using WIFI printer and the PDF will appear on the screen as follows. Final TEST Report To acquire new ECG, go back to main screen and change the mode to ECG and Save. Click on NEW ECG to start the ECG recording. When you click on New ECG, a blank screen appeards as shown, Click on Green Icon / Play Button. While recording the ECG the Green Icon changes to Red after 20 seconds while recording the ECG. Only after this Red indication, you get the option to save the ECG report. To save the ECG report, click on generate report icon and select ok. A new screen appears to enter the patient details and comments. After entering the patient details click on save option. After saving the patient data it asks for opening the generated ECG report using PDF or to print on Wifi Printer. Final ECG Report Saved ECG reports in the Load Data
Saved ECG reports in Reports
menu. If you open any file using reports menu, the ECG reports will be opend in PDF Format To open the saved file in the Android Device, go to Files, Download, Tele- Help option guides ECG Folder, Reports you to locate the saved ECG reports location.
Saved ECG reports in
PDF Format Dr. A. T. Raghavender Aksharaarka Enterprise Pvt. Ltd. , H.No: 1-2-288/14/1, Domal Guda, Opp. Indian Gas Gowdown Hyderabad - 500029, Telangana, India raghavi9@gmail.com, aksharaarka@gmail.com Mobile: 99590 45969, 94405 32011 www.aksharaarka.com, www.aksharaarka.co.in CIN No: U74999TG2016PTC111776, GST No: 36AAOCA7233L1Z9, IEC Code: AAOCA7233L