Professional Documents
Culture Documents
2 10 Lbs CO2 Fire Extinguisher (4.5 kg), Carbon Dioxide Fire Extinguisher, Stored Pressure, EA 27 N
MTA-ABC-FPIB-001-R3 PAGE: 1 of 1
Revision History:
VENDOR ID:10054831
ABC DRY CHEMICAL Aluminum Valve
B417/T
B500/T
B402/T
B443
B456
Amerex Corporation A411
RUGGED
• 6 Year Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
Brass Valve - Heavy Duty
Chrome Plated Brass Valve Body
Stainless Steel Handle & Lever
Aluminum Valve - Light to Medium Duty
Anodized Aluminum Valve Body Brass Valve
Anodized Aluminum Handle & Lever B424
• Temperature Range -65°F to 120°F B461
B441
USER FRIENDLY
• Easy and Economical to Maintain and 423
Service
• Large Loop Pull Pin
• Bar Coded and Bilingual Labels
OPTION
• USCG Approved with Bracket Listed on UL AVAILABLE IN WHEELED
Label EXTINGUISHERS
• Chrome Cylinders (See Chart Below)
ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium
phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F
and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires
and will not conduct electricity back to the operator.
845 817 818 817S 818S 845S 821 821S 861H 808 896
01427 06584
807 809 812 809G 810G 811G 811 810 / 810NM 810CG (USCG) 895
Amerex Corporation
RUGGED
• 5 Year Warranty
• All Metal Valve Construction
• Rust free aluminum cylinders
• Durable High Gloss Polyester Powder Paint
• Temperature Range -22°F to 120°F
USER FRIENDLY
• Meets Many Hospital Medical Equipment
Requirements MODELS
• Large Loop Stainless Steel Pull Pin 332 331
• Model 322NM is Independently Tested and 322 330
Approved for use in MRI Facilities to
11.7 Tesla
• Model 322NM has a Sanitary AVAILABLE IN 50 / 100 lb. WHEELED
White Paint Finish (easy to clean) EXTINGUISHERS
• Bar Coded and Bilingual Labels
OPTION
• USCG Approved with Bracket Listed on UL
Label
Model
322NM
NON-MAGNETIC
CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by eliminating
oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon
Dioxide is a clean, non-contaminating, odorless gas.
Non-Magnetic model available (Model 322NM - Tested to 11.7 Tesla)
8 CAN/ULC-S508 - ANSI/UL711
BRACKET TYPES Wall Hanger Brackets Bracket Adapters
17737 (NM)
01007 (Red)
14315 (NM) 22885 (NM)
0546 0575 0577
845 817 818 817S 818S 845S 821 821S 861H 808 896
01427 06584
807 809 812 809G 810G 811G 811 810 / 810NM 810CG (USCG) 895
ABC 6 LB. B443 5 00546 WALL 808, 809, 895 808, 809, 889HB, 895 862
DRY CHEMICAL 6 LB. B461 5 00546 WALL 808, 809, 895 808, 809, 846, 889, 895 862
10 LB. B456 5 00546 WALL 808, 809, 895 808, 809, 846,889, 889HB, 895 862
10 LB. B441 5 01007 WALL 809, 895 808, 809, 889HB, 895, 846 862
20 LB. A411 7 00577 WALL 810 810 864 YES
20 LB. 423 7 00577 WALL 810 810 864 YES
1 LB. A620T 2.63 845 VEHICLE N/A 845S N/A
2.5 LB. B403 / B403T 3 4834 WALL / 817 VM 817 817S 860
5 LB. B409T 4.25 818 V/MARINE 818, 821, 861H 807, 818S, 821, 821S, 861H 860
5.5 LB. B453 4.25 16591 WALL 818, 821, 861H 807, 818S, 821, 821S, 861H 860
REGULAR 6 LB. B462 5 00546 WALL 808, 809, 895 808, 809, 889HB, 895 862
DRY CHEMICAL
10 LB. B447 5 01007 WALL 809, 895 808, 809, 846, 889HB, 895 862
10 LB. B457 5 00546 WALL 809, 895 808, 809, 846, 889HB, 895 862
20 LB. A412 7 00577 WALL 810 810 864 YES
20 LB. 408 7 00577 WALL 810 810 864 YES
2.5 LB. B410T 3 817 V/MARINE 817 817S 860
5 LB. B479 / B479T 4.25 16591 WALL / 818 VM 818, 821, 861H 807, 818S, 821, 821S, 861H 860
PURPLE K 10 LB. B460 5 01007 WALL 809, 895 808, 809, 846, 889HB, 895 862
DRY CHEMICAL
20 LB. A413 7 00577 WALL 810 810 864 YES
20 LB. 415 7 00577 WALL 810 810 864 YES
2.5 LB. 320 4.38 16591 N/A 896 860
2.5 LB. 320NM 4.38 22885 N/A N/A N/A
5 LB. 322 5.25 00546 WALL 809 809 862
CARBON
5 LB. 322NM 5.25 17737 WALL N/A N/A N/A
DIOXIDE
10 LB. 330 7 00575 WALL 810 810 N/A
15 LB. 331 7 00575 WALL 810 810 864 YES
20 LB. 332 8 22290 WALL 811 811 864 YES
810 810
13.2 LB. 594, 592, 595,
HIGH (6 KG) 599 7 09582 WALL & & N/A
PERFORMANCE 810G 810G
DRY CHEMICAL
810 810
20 LB. 581, 582, 580, 864
7 09582 WALL & & YES
FAST FLOW (9 KG) 584, 564, 566
AND 810G 810G
COMPLIANCE 811 811
FLOW 30 LB. 567, 568, 569
8 09581 WALL & & 864 YES
(13.6 KG) 589, 591
811G 811G
HIGH FLOW 10 LB. 720, 721, 722 5 01007 WALL 809, 895 808, 809, 889HB, 895, 846 862
EXTINGUISHERS 20 LB. 760, 761, 762 7 00577 WALL 810 810 864 YES
CLASS D 30 LB. B570 8 00577 WALL N.A 811 864 YES
DRY POWDER
30 LB. B571 8 00577 WALL N/A 811 864 YES
All Amerex brackets meet the latest UL salt spray requirements (240 hrs. @ 20% salt solution - ASTM B117)
1 year manufacturer’s warranty applies to all brackets
17
DATA SHEET
Applications
RED LINE dry chemical extinguishers are designed for the
protection of ordinary and high risk hazards. This hand portable
extinguisher is used in industries where the occurrence or
possibility of fire is high. The RED LINE extinguisher has set
the standard for reliable fire protection in many industries and
applications including refining, petrochemical, oil and natural
gas production, mining, transportation, utilities, metal process-
ing, paint process areas, welding areas, material storage areas 003662
X X X X X
X X X X X
X X X X X
X X N/A X X
1.55 lb/sec (0.70 kg/sec) 1.55 lb/sec (0.70 kg/sec) _ 2.10 lb/sec (0.95 kg/sec) 2.35 lb/sec (1.10 kg/sec)
12 sec 12 sec _ 12 sec 12 sec
15-20 ft (4.6 – 6.1 m) 15-20 ft (4.6 – 6.1 m) _ 15-20 ft (4.6 – 6.1 m) 15-20 ft (4.6 – 6.1 m)
1-A:20-B:C 20-B:C _ 1-A:20-B:C 20-B:C
UL, ULC, FM, USCG** UL, ULC, FM, USCG** UL, ULC, FM, USCG** UL, ULC, FM, USCG** UL, ULC, FM, USCG**
35 lb (15.9 kg) 36 lb (16.3 kg) 54.5 lb (24.7 kg) 49.5 lb (22.5 kg) 51.5 lb (23.4 kg)
20.5 in. (521 mm) 20.5 in. (521 mm) 22.5 in. (572 mm) 22.5 in. (572 mm) 22.5 in. (572 mm)
10.4 in. (264 mm) 10.4 in. (264 mm) 11.1 in. (283 mm) 11.1 in. (283 mm) 11.1 in. (283 mm)
7.0 in. (178 mm) 7.0 in. (178 mm) 8.0 in. (203 mm) 8.0 in. (203 mm) 8.0 in. (203 mm)
0.5 in. (13 mm) 0.5 in. (13 mm) 0.6 in. (16 mm) 0.6 in. (16 mm) 0.6 in. (16 mm)
31.6 in. (803 mm) 31.6 in. (803 mm) 35.6 in. (905 mm) 35.6 in. (905 mm) 35.6 in. (905 mm)
6.0 in. (150 mm) 6.0 in. (150 mm) 7.0 in. (175 mm) 7.0 in. (175 mm) 7.0 in. (175 mm)
60 ft2 (5.6 m2) 80 ft2 (7.4 m2) 60 ft2 (5.6 m2) 80 ft2 (7.4 m2) 120 ft2 (11.1 m2)
150 ft2 (13.9 m2) 200 ft2 (18.6 m2) 150 ft2 (13.9 m2) 200 ft2 (18.6 m2) 300 ft2 (27.9 m2)
Description (Continued) Metal Cartridge Guard
n Metal cartridge guard is available as a distributor installed
n Painted steel parts are prepared by going
option on models 20 and 30 lb extinguishers.
through a series of surface preparation
steps, including degreasing, an acid pick-
ling process, zinc phosphate bonding and
non-chromate sealing.
n The parts are then painted using an electro-
statically applied polyester powder coating
and oven cured.
n Cartridge guard is made of a composite
consisting of fiber filled, polypropylene and
various additives to resist UV degradation
and maintain strength and integrity.
n Composite guard is designed with the
nozzle holster as an integral part of the
one piece construction. It contains a hose
retainer tab which can be used to attach
the visual seal. The guard is designed to
003067
prevent its removal unless the inspection 003665
Options n Compact
ANSUL offers a wide array of options to customize the extin- n Dimensions – (H) 19 in. (480 mm)
guisher to meet your needs. For some users, these options have (W) 5 1/2 in. (140 mm)
become the standard for RED LINE extinguishers. (D) 5 1/2 in. (140 mm)
n Ratings (UL/ULC)
Corrosion Resistant (CR) Models FORAY Agent: 2-A:10-B:C
n In addition to the standard surface preparation procedures, PLUS FIFTY C Agent: 10-B:C
the steel parts are primed using a zinc rich primer with a Purple K Agent: 20-B:C
minimum zinc content of 90%. n Many of the same design features
n The top coat is a polyester paint applied as a powder and and testing requirements as
oven cured. The dry film is continuous and is a minimum Models 10, 20, and 30.
thickness of 1.5 mils.
003666
n The hose couplings, fill cap, carrying handle, nozzle body,
nozzle lever, nozzle tip and cartridge receiver push lever are Agents
black anodized for added corrosion resistance.
FORAY Dry Chemical
n The cartridge receiver body is painted with an epoxy paint for
added protection in corrosive environments. A monoammonium phosphate-based agent for use on Class A
(wood, paper cloth), Class B (flammable liquids and gases), and
Ring Pin (RP) Models Class C (electrical) fires.
n The ring pin, when inserted in the cartridge receiver, provides
Purple-K Dry Chemical
secondary protection against accidental actuation of the unit
when the hose is not in place. A potassium bicarbonate-based agent which is the most effec-
tive ANSUL agent for knock-down of Class B (flaable liquids and
n The operating instruction nameplate notes the removal of ring gases) and Class C (electrical) fires.
pin before actuation of the extinguisher.
PLUS-FIFTY C Dry Chemical
Low Temperature (LT) Models
A sodium bicarbonate-based agent for use on Class B (flam-
n The LT model is equipped with a nitrogen cartridge and mable liquids and gases) and Class C (electrical) fires.
cartridge receiver which is listed and approved for operation
in environments with temperatures as low as -65 °F (-54 °C).
Note: The high flow extinguishers have been designed for pressurized
flammable liquids and pressurized gas fires and other special hazards where
agent flow rate is crucial to extinguishment. (Reference NFPA 10, Paragraph
5.5.1.1.1 and 5.5.1.1.2.) The high flow extinguishers can also suppress other
types of fire.
BRACKETS All Amerex brackets meet the latest UL salt spray requirements (240 hrs. @ 20% salt solution—ASTM B117).
1-year manufacturer’s warranty applies to all brackets. Please see Amerex Parts Catalog for bracket details. EXTINGUISHERS AT-A-GLANCE
RUBBER 859
AGENT SIZE CYL. DIA. INCLUDED USCG OPTIONAL STRAP DOLLY
Wall-Hanger Brackets 6- & 10-lb. Wall Strap Type TYPE (CAPACITY) MODEL (INCH) BRACKET BRACKET BRACKETS BRACKETS OPTION
WATER 2.5 Gal. 240 7 816 Wall N/A 810 864 Yes
1.75 Gal. C270 7 816SS Wall N/A 810, 810NM N/A
WATER MIST
2.5 Gal. C272 7 816SS Wall N/A 810, 810NM N/A
6 Liter C260 7 816 Wall 810 N/A
816 816 SS 801 802 803 888 801 SS 2.5 Gal. C262 7 816 Wall 810 864 Yes
WET
CHEMICAL 6 Liter C260CG 7 816 Wall 810CG N/A N/A
2.5 Gal. C 262CG 7 816 Wall 810CG N/A N/A
1.92 LB. 337TS 3.25 899TS
3.75 LB. 347TS 3.25 898TS
853 819 820 888 877 876 20# C02 889 889 HB 846 HALOTRON® BRX
3.75 LB. 349TS 3.25 898TS
12.5 LB. 351 5 801 Wall 809
Vehicle/Marine/Aviation Brackets 1.4 LB. A384T 2.63 845 Vehicle N/A 845S N/A
2.5 LB. B385TS 3 817S Vehicle N/A 817S 860
5 LB. B386T 4.25 818 Vehicle 818, 821, 861H 818S, 821, 821S, 807 860
HALOTRON® I
5.5 LB. B394TS 4.25 818S Aircraft N/A 818S, 821, 821S, 807 860
11 LB. 397 6 802 Wall 812 812 N/A
15.5 LB. 398 6 802 Wall 812 812 N/A
1.25 LB. A344T 2.63 845 Vehicle N/A 845S N/A
2.5 LB. C352TS 3 817S Aircraft 817 N/A 860
3 LB. C354TS 3 817S Aircraft 817 N/A 860
HALON 1211 5 LB. B355T 4.25 818 V 818, 821, 861H 818S, 821, 821S, 807 860
9 LB. B369 5 801 Wall 808, 809 808, 809, 846, 889HB, 895 862
845 845S 817 817S 818 818S 821 821S 861H 808
13 LB. B371 5 816 Wall 809 846, 809, 846, 889HB, 895 862
17 LB. 361 7 803 Wall 810 810 864 Yes
2.5 LB. B417 / B417T 3 817VM Wall / 817 817 817S 860
Heavy-Duty Box-Type Vehicle Brackets (Red Brackets are Galvanized) 5 LB. B402 / B402T 4.25 888 Wall / 818 818, 821, 861H 818S, 821, 821S, 807 860
5 LB. B500 / B500T 4.25 888 Wall / 818 818, 821, 861H 818S, 821, 821S, 807 860
5 LB. B424 4.25 888 Wall 821, 861H 821, 821S, 807 860
ABC 6 LB. B443 5 801 Wall 808, 809, 895 808, 809, 889HB, 895 862
DRY CHEMICAL 6 LB. B461 5 801 Wall 808, 809, 895 808, 809, 846, 889, 895 862
10 LB. B456 5 801 Wall 809, 895 808, 809, 846,889, 889HB, 895 862
10 LB. B441 5 816 Wall 809, 895 808, 809, 889HB, 895, 846 862
20 LB. A411 7 803 Wall 810 810 864 Yes
20 LB. 423 7 803 Wall 810 810 864 Yes
1 LB. 376T 2.63 846
2.5 LB. 377 3
2.5 LB. B410T 3 817 817 817S 860
807 809 812 895 810 810CG 810NM 811 PURPLE K
5 LB. B479 / B479T 4.25 888 Wall / 818 VM 818, 821, 861H 807, 818S, 821, 821S, 861H 860
DRY CHEMICAL
10 LB. B460 5 816 Wall 809, 895 808, 809, 846, 889HB, 895 862
20 LB. A413 7 803 Wall 810 810 864 Yes
Heavy-Duty Heavy-Duty 20 LB. 415 7 803 Wall 810 810 864 Yes
Rubber Strap Brackets Dolly Cart 5 LB. 322 5.25 801 Wall 809 809 862
5 LB. 322NM 5.25 801SS Wall N/A N/A N/A
CARBON
10 LB. 330 7 802 Wall 810 810 N/A
DIOXIDE
859 15 LB. 331 7 802 Wall 810 810 864 Yes
20 LB. 332 8 20# CO2 Wall 811 811 864 Yes
13.2 LB. (6 KG) 713, 716, 790, 793 7 877 Wall 810 & 810G 810 & 810G N/A
20 LB. (9 KG) 714, 717, 791, 794, 795 7 877 Wall 810 & 810G 810 & 810G 864 Yes
Z-SERIES
High Performance
30 LB. (13.6 KG) 715, 718, 792, 796 8 876 Wall 811 & 811G 811 & 811G 864 Yes
10 LB. 720, 722 5 816 Wall 809, 895 808, 809, 889HB, 895, 846 862
HIGH FLOW
809G 810G 811G EXTINGUISHERS 20 LB. 760, 762 7 803 Wall 810 810 864 Yes
860 862 864 CLASS D 30 LB. B570 8 803 Wall N/A 811 864 Yes
DRY POWDER
For a full list of our available brackets, 30 LB. C571 7 877 Wall 810 810 864 Yes
please visit www.amerex-fire.com.
18 ® AMEREX-FIRE.COM AMEREX-FIRE.COM ® 19
FOR ESTIMATION PURPOSES ONLY
MZK
FOR ESTIMATION PURPOSES ONLY
250
250
MZK
TECHNICAL SUBMITTAL
ALUMINUM VALVE—
LIGHT TO MEDIUM DUTY
• Anodized aluminum valve body
B424 B461 B441 423 • Anodized aluminum handle
BRASS VALVE & lever
Temperature range -65°F to 120°F
USER-FRIENDLY
Easy and economical to maintain
and service
QR coded and multilingual labels
OPTION
USCG approved with bracket listed
on UL label
Chrome cylinders (see chart below)
B417/T B500/T B402/T B443 B456 A411
ALUMINUM VALVE
12 ® AMEREX-FIRE.COM
CARBON DIOXIDE
RUGGED CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by displacing oxygen.
It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-
5-Year manufacturer’s warranty
contaminating, odorless gas.
All-metal valve construction
Rust-free aluminum cylinders
Durable high-gloss polyester
powder paint
Temperature range -22°F to 120°F
USER-FRIENDLY
Meets many hospital medical
equipment requirements
Large loop stainless steel pull pin
QR coded and multilingual labels
Leaves no residue
OPTION 322NM
AVAILABLE IN
50 AND 100 LB. WHEELED
EXTINGUISHERS
NONMAGNETIC MODEL AVAILABLE
(MODEL 322NM—TESTED TO 11.7 TESLA)
AMEREX-FIRE.COM ® 11
ABC DRY CHEMICAL Aluminum Valve
B417/T
B500/T
B402/T
B443
B456
Amerex Corporation A411
RUGGED
• 6 Year Warranty
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
Brass Valve - Heavy Duty
Chrome Plated Brass Valve Body
Stainless Steel Handle & Lever
Aluminum Valve - Light to Medium Duty
Anodized Aluminum Valve Body Brass Valve
Anodized Aluminum Handle & Lever B424
• Temperature Range -65°F to 120°F B461
B441
USER FRIENDLY
• Easy and Economical to Maintain and 423
Service
• Large Loop Pull Pin
• Bar Coded and Bi-lingual Labels
OPTION
• USCG Approved with Bracket Listed on UL AVAILABLE IN WHEELED
Label EXTINGUISHERS
• Chrome Cylinders (See Chart Below)
ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium
phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F
and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires
and will not conduct electricity back to the operator.
KM629993
KM73087
FIRE
HOSE REEL
EX16127
FIRE HOSE
EX26925
R39299
MH60783
PUMPS
BLADDER
TANKS
FIRE
CABINETS
SFFECO
KITCHENHOOD
SYSTEM
SFFECO227
Utilise
HFC - 227ea
Clean Agent Gas (UL/FM)
R22330
CO 2
SYSTEM
TROLLEY / MODULAR
0086 KM668606
EXTINGUISHERS
FIRE DOORS
AND FRAMES
EX6069
THERMO-ACT
SYSTEM
PORTABLE FOAM LPS EN 14384:2005 EX16453
EXTINGUISHERS CONCENTRATES Cert. 1280Ba
Rev:08/10-2019
Jeddah Branch
Factory & Head Office - Riyadh
P.O. Box: 16769, Jeddah – 21474, KSA
2nd Industrial Area, Al-Kharj Road, Riyadh, KSA Tel : +966 12 670 6009, Fax: +966 12 676 0307
P.O. Box: 58469, Riyadh 11515 E-mail: jeddah@sffeco.com.sa
Tel : +966 11 2650070, Fax: +966 11 2652190 Dammam Branch
E-mail: riyadh@sffeco.com.sa P.O. Box: 7162, Dammam – 31462, KSA
Tel : +966 13 8351961, Fax: +966 13 8351968
SFFECO Global - Dubai
E-mail: dammam@sffeco.com.sa
P.O. Box: 261318, JAFZA South, Dubai U.A.E. Madinah Branch
Tel: +971 4 880 9890, Fax: +971 4 880 9822 Tel : 0148660959, 0148283256, Fax: 0148660969
www.
E-mail: sales@sffecoglobal.com E-mail: madinah@sffeco.com.sa SFFECO .com