Professional Documents
Culture Documents
Interior Design Specification Manual (PDFDrive)
Interior Design Specification Manual (PDFDrive)
Specification Manual
Modern Calm Decor Package
Gen 4 New Build
Decor Package: Modern Calm
Brand: Fairfield Inn
Title: Gen 4 New Build Interior Design Specification Manual
Table of Contents
Chapter Page
Title Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Users Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Reference Designator Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Public Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Breakfast Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Employee Dining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Lobby Lounge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Meeting Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Office Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
California . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Carpet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Drapery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Restrooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Wall Covering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Exercise Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Indoor Pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Outdoor Pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Patio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Meeting Room Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Corridor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Guest Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Alternate Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
Item index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
Vendor List and Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
Flooded Floorplans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450
Effective Date: 12-20-2017
Published Date: 03-31-2017
Version: Version 1.03
Page: 1
Printed Date: 28-03-2017
GLOBAL DESIGN
GLOBAL DESIGN
We are pleased to assist you in creating a competitive hotel in your market by establishing the
right quality throughout your hotel that makes Marriott a preferred guest choice.
The attached Interior Design Specification Manual is your décor package reference. Whether you
are purchasing from Marriott suppliers, on your own, or through Marriott’s experienced
Procurement Team, the Interior Design Specification Manual will give you a detailed preview of
the appropriate Furniture, Fixtures, and Equipment (FF&E) that create a Marriott property.
In addition, an Interior Finish Index, consisting of construction finishes and items is provided to
assist Owners and Franchisees and their General Contractors with the required specifications.
Marriott’s Global Design Interior Design Team is available to answer any questions you might
have regarding the enclosed information, and how it might apply to your specific project needs.
GLOBAL DESIGN
The Interior Design Specification Manual provides a comprehensive volume of specifications for
all Furniture, Fixtures, and Equipment (FF&E) found in the Bill of Materials for a specific décor
package. Each manual is relevant to the brand and project type (new build / conversion /
renovation) for a given period of time from the effective date to the published date.
Manual Use:
a. Use this manual to select items for your prototypical décor package. If custom décor is
used, please refer to the custom submittal guide for instructions.
b. Indicate the publish date and effective date on your Interior Design Select Form (so you
can cross-reference which version you used for the project).
c. When selecting alternates and upgrades, indicate which standard item you are replacing.
Navigation:
Several navigation options will assist you in finding what you’re looking for:
a. Table of Contents
b. Tabs: On the left edge of the PDF there are tabs for each chapter and sub-chapter. Click
on them to navigate to the area / sub area.
c. Page Number Entry: Enter a page number in the bottom of the PDF file and hit return to
automatically jump to that page.
Chapters:
Each chapter within the manual breaks up the book into primary areas of a hotel facility.
a. Public Space
b. Corridors
c. Guestrooms
d. Optional Items
GLOBAL DESIGN
Hoter Signs.com
2156 Amnicola Hwy
Chattnooga, TN 37406
Hank McMahon
888-273-8726
Definitions:
The following are definitions for optional and alternate items:
a. Alternates: An item that can replace a standard item; a one for one replacement.
Example: Selecting the alternate sized communal table versus using the standard sized
communal table.
b. Options: An item that is not required, but can be added to the standard Bill of Materials at the
owner’s discretion; a one to many, or many to one replacement.
Example: Adding the optional accessories package to a guestroom.
GLOBAL DESIGN
Specification:
Each item specification is documented with the following information:
a. Area, Room Type
b. Marriott Item Identification Number
c. Drawing X-Reference Designator
d. Short and Long Description
e. Color Picture
f. Supplier Information
g. Duplicates Summary Table Shows Where the Item Can Be Found
X-Reference Legend:
A summary table of all the drawing x-references and their business meanings can be found in the
next legend. Save and print this for offline reference when viewing drawings.
GLOBAL DESIGN
Overview
GLOBAL DESIGN
Overview
Interior Design Submittal
The CFRST Interior Design Submittal Process consists of 6 important steps. The attached
information is designed to guide you through the interior design submittal process for your new
build hotel.
Roles and Responsibilities: Defines the steps that must be taken and by whom during
the custom décor submittal process.
Tools and Resources: Defines the resources you need and how to access them during
the submittal process.
GLOBAL DESIGN
Activity
A. Owner must hire a professional interior designer or architectural firm based on project requirements.
B. Owner contacts Marriott Interior Design to discuss construction/design scope and schedule.
C. Conference call/meeting between interior designer and Marriott Interior Design to discuss design direction.
Occurrence
Activity Helpful Information
of Activity
A. Submit custom interior décor selection form found in the Found in the attachments section of your
18 months
Welcome Packet you received upon project approval. Welcome Package.
Ensure everything is clearly labeled and
B. Submit preliminary custom interior décor package to
firmly attached. Physical samples and carpet
include loose samples of the following: custom carpet
seaming diagrams are required. All items
samples/lasers with carpet layout, tile and stone selections, 16-14 months
need to be submitted at the same time. It is
fabric and furniture selections, lighting selections, preliminary
recommended that décor presentation be in
artwork, and accessory selections.
person.
Review of Preliminary Custom Interior Décor Package: Marriott Interior Design Review Duration – 15 Business Days
C. Submit design boards to include all revised décor
selections from preliminary submittal, in addition to a 12 months
corresponding coded furniture floor plan and legend.
D. Executive Committee / Brand Review ensuring design
direction is appropriate for project and works within hotel 12 months
Brand guidelines.
Review of Décor Boards: Marriott Interior Design Review Duration – 15 Business Days
GLOBAL DESIGN
Review of FF&E Specifications: Marriott Interior Design Review Duration – 15 Business Days
Begins 8 months prior to forecasted construction
IV. Sample Room Review completion date
Occurrence
Activity of Activity Helpful Information
GLOBAL DESIGN
The easiest and most cost effective way to handle your Furniture, Fixtures, and Equipment
(FF&E) is to purchase directly through Marriott’s Global Design Procurement Team. Global
Design Procurement can supply you with a preliminary FF&E quote for your specific project.
Please contact Angela Clarke, Director of Purchasing at 301.380.4256 or
angela.clarke@marriott.com. At this time, a preliminary quote will be forwarded to you, as well as
a verbal explanation of the procurement process and services available. Please be aware, it is
the responsibility of the Owner or Franchisee to inform Global Design Procurement of any local
code requirements needed for the specifications on his or her project.
All FF&E items specified in this manual are the prototypical specifications for Marriott’s Select
Service and Extended Stay brands. Marriott does not encourage the use of specifications that
deviate from our Design Standards, but understands that deviations may be necessary on a
project. The use of a custom décor package must be approved by Marriott at least 18 months
prior to the property opening. If deviations are required for a specific project, formal specification
and finish submittals are required and must be approved by Global Design Interior Design Team.
Proposed alternative specifications and finishes must meet or exceed the prototypical
specifications as outlined in this manual. The alternatives must also reflect the design intent and
brand image of the standard interior décor package selected for your project. It is the
responsibility of the Owner or Franchisee to make all selections for items that are non-
prototypical.
Effective Date: 12-20-2017
Published Date: 03-31-2017
Version: Version 1.03
Page: 11
Printed Date: 28-03-2017
GLOBAL DESIGN
A preliminary custom interior design package must be submitted to Global Design’s Interior
Design Team for review 16 months prior to property opening.
Presentation boards are required for the public spaces and the guestrooms for executive
review and approval 12 months prior to hotel opening. It is best to contact Global Design’s
Interior Design Team prior to beginning any custom design work for initial approval.
FF&E Submittal Process for Non-Approved Suppliers and Custom Décor Package
If Marriott non-approved suppliers are specified or a custom décor package is used, submittal of a
formal FF&E specification book will be required. A formal specification book should include all
FF&E items to be purchased through Marriott non-approved suppliers or custom specifications,
and must be reviewed by Global Design’s Interior Design Team for approval. For custom décor
packages, this must be submitted 10 months prior to property opening and prior to purchasing,
and 8 months prior to opening and prior to purchasing for prototypical design packages. If a
custom décor package is being used, the preliminary approval of the décors must be acquired
from Global Design
Effective Date: 12-20-2017
Published Date: 03-31-2017
Version: Version 1.03
Page: 12
Printed Date: 28-03-2017
GLOBAL DESIGN
Interior Design prior to this submittal. The specification should include the following:
1. Design Intent
2. Supplier Information
3. Construction Specifications
4. Color photograph of item(s)
5. Dimensions
6. Fabric Sample
7. Stain Sample
If a custom guestroom package is proposed, a full sample room mock-up is required for final
approval. This should be done at least 8 months prior to opening.
Marriott’s approved case good suppliers are Kimball, Thomasville, and Fairmont. If you purchase
from another supplier, please send a sample nightstand and construction specifications to Global
Design Interior Design for initial review. The sample must be received 10 months prior to the
hotel opening and prior to the hotel sample room review. The final submittal for approval must
include:
1. Line Drawing of Each Item Including Dimensions
2. Stain Sample on Veneer and Hardwood
GLOBAL DESIGN
Artwork may deviate from the prototypical specifications in color and style. All deviations must be
submitted to Global Design’s Interior Design Team for approval. The submittal must include:
1. Color Photograph of All Pieces
2. Sample of Matte Board
3. Sample of Frame
4. Dimension of all Pieces
5. Mounting Specifications and Installation with Elevation Drawings.
Interior plants and floral items may also deviate from the prototypical specification in color and
style. All deviations must be submitted to Global Design’s Interior Design Team for approval.
The submittal must include:
1. Sample or color photograph of each floral and / or interior plant used for the alternate
interior landscape package.
2. Dimensions of all floral and / or interior plants.
3. Plan or description indicating where each type of floral and / or interior plant will be
used at the property.
Marriott Interior Design will review each submittal within 15 business days of receipt. The review
will identify items as either “approved” or “reselect / resubmit”. For those marked “reselect /
resubmit” it is required you identify a new standard and resubmit to Global Design’s Interior
Design Team for review. Whenever possible, rationale for the requested re-submittal will be
provided. All final revisions and any additional items (i.e. artwork, accessories, plants) must be
submitted
7 months prior to opening.
GLOBAL DESIGN
Interior Marriott
Designer Owner / Franchisee
Request access to the Marriott New Build and Renovation Web Site
(Buzzsaw) where you can find CFRST requirements, décor
information, prototype drawings, and bill of materials (control books).
GLOBAL DESIGN
Typically, an interior designer is familiar with building codes, ADA (American Disabilities Act)
requirements, lighting / electrical needs, construction techniques, and architectural requirements.
He or she typically has a 4 or 5 year college degree from an accredited interior design and / or
architectural program. In addition to enhancing the total visual environment, an interior designer
creates a space that is functional, efficient, and safe, and has the ability to successfully meet
Marriott’s Design Standards.
GLOBAL DESIGN
Is this a custom project (i.e. partial or full custom décor / custom architectural building
footprint)?
a. Working with a custom building / décor, typically, an interior designer is required
to interpret Marriott’s Design Standards and requirements.
b. If implementing a standard décor in a prototype building, an interior designer may
assist in quantifying the FF&E for the purchasing agent.
Will you need assistance in planning (i.e. budget) or project schedule preparation?
An interior designer should bring value to your project. Typical skills include:
a. Can interpret Marriott’s prototype project specifications for building layout.
b. Will lead you through the design process.
c. Follows local and national building and fire codes.
d. Provides coordination with purchasing / architectural firm.
e. Is able to prepare bill of materials, specifications book, finish index, drapery
drawings, and more.
f. Can review custom millwork shop drawings and provide you and your contractor
with feedback.
GLOBAL DESIGN
Skills:
Inquire about other services whom the interior designer or their design firm can provide,
and what can be done to help you optimize your understanding of the cost of the project.
Services to look for include:
a. Design Selections
b. Space Planning
c. Bill of Material (BOM) Preparation
d. CADD – Drawing Preparation vs. Sketches
e. Presentation – Boards, Table Top (loose samples)
Will a team be assigned to your project or one individual? The amount of people
assigned to your project may impact your project schedule.
Discuss project duration and key milestones with the interior designer. Make sure the
interior designer is available to work on the project within the desired timetable.
Establish parameters for updates and on-going communication between you and the
interior designer.
Effective Date: 12-20-2017
Published Date: 03-31-2017
Version: Version 1.03
Page: 18
Printed Date: 28-03-2017
GLOBAL DESIGN
Contract:
A contract allows you to specify who will be responsible for what, how long the project will
last, and what the budget limits will be. It is in your best interest to have a signed contract
before any work begins or any money is exchanged.
Discuss the interior designer’s fee structure. Typical fee structures are as follows:
a. Fixed Fee (or Flat Fee): The interior designer identifies a specific sum to cover
costs, exclusive of reimbursement for expenses. One total fee applies to the
complete range of services, from conceptual development through layouts,
specifications, and final installation.
b. Hourly Fee: Compensation is based on actual time expended by the interior
designer on a project or specific service.
c. Cost Plus: An interior designer purchases materials, furnishings, and services
(e.g. carpentry, drapery workrooms, picture framing, etc.) at cost and sells to the
client at the interior designer’s cost plus a specified percentage agreed to with
the client to compensate for the interior designer’s time and effort.
d. Area Fee: For larger commercial projects, costs may be calculated by square
feet, based on the total area of the project.
e. Retainer: In addition to the contract, the interior designer may require a retainer
before beginning a project. A retainer is an amount of money paid by the client to
the interior designer and applied to the balance due at the termination of the
project. The retainer is customarily paid upon signing the contractual agreement
in advance of design services. The amount of the retainer varies, but generally, it
is approximately one third of the project cost.
The contract should include a minimum of two trips to the hotel; the initial sample room
visit and the final installation visit.
The contract is likely to include reference to reimbursable expenses, such as:
a. Printing
b. Travel Expenses
c. Presentation Board Costs
d. Postage
GLOBAL DESIGN
Discuss a high level schedule in advance, to ensure it is feasible, before signing the
contract.
Will the interior designer prepare the drawings or will the architect? It is not necessarily
important who provides the drawings, but it should be clarified up front.
Is the interior designer hired to complete a portion of the project design or all areas? This
needs to be clearly communicated to all parties including Marriott. Have a plan in place as
to who will complete and document other areas of the hotel to ensure the entire scope is
completed accurately and the project is executed seamlessly.
Team meetings are valuable and it is important to discuss the type of meeting and level
of participation expected. Discuss this with the project manager, interior designer, and
general contractor to establish what types of meetings will be scheduled and how often.
If working with a custom design, include costs to make required revisions if scheme is not
approved by Marriott.
What types of reports are required?
a. Bill of Materials with Quantities
b. Finish Schedule
c. Project Schedule
d. Budget Spreadsheet
e. Specifications Book
Once you have interviewed several interior designers, take time to compare their
qualifications and fees. Don’t base your decision on price alone. Keep in mind that
differences in each proposal reflect variables such as level of service and quality. After
the interior designer is hired, you need to address specific project needs and goals.
Keep in mind the more detail you provide, the more successful your interior designer will
be in meeting your needs and expectations.
GLOBAL DESIGN
Factor in that custom décor schemes take approximately 8 – 10 months longer and can
be more expensive than prototypical décor schemes.
The interior designer should contract Marriott Interior Design as soon as retained to
discuss process, design direction, required approvals, new and existing Design
Standards, project schedule, and communication.
Marriott must approve any custom deviations prior to purchasing. Refer to the “Custom
Decor Submittal Checklist” and the FF & E Specification Submittal for process.
Identify the purchasing agent with whom the interior designer will be working. Marriott has
approved suppliers that should be used for custom décor development.
Consider and discuss the positive and negative aspects of the space, what can be
improved, how new Design Standards can be incorporated, and more.
GLOBAL DESIGN
Project Completion:
The interior designer or general contractor, depending on the contract, is responsible for
ensuring that the installation of FF&E is completed.
Although not typically required for a prototypical project, the interior designer should
attend the first installation of rooms. This can be helpful, particularly on a custom project.
Require the interior designer to turn over all FF&E documentation (or a copy) to the
property at project close-out.
GLOBAL DESIGN
Building a new hotel is a massive undertaking, often involving several key players, hundreds of
process steps, and thousands of pages in documentation. The submittal process involved in
building a new Marriott hotel is extremely valuable to your finished product, and everyone benefits
from staying on track with the endeavor, including our guests. Marriott International and Global
Design are together dedicated to providing the knowledge and support Owners and Franchisees
need to make their endeavors successful. In addition to the information provided here, take
advantage of other guiding tools and resources now available:
Please use the link below and click on “Request Access” to register for a new log-in:
http://project.marriott.com. For support accessing or navigating Marriott's New Build and
Renovation Web Site, please contact Monica Melendez at monica.melendez@marriott.com or
call 301.380.5089.
GLOBAL DESIGN
GLOBAL DESIGN
Public Space
GLOBAL DESIGN
Breakfast Room
GLOBAL DESIGN
Specification
ITEM: 24" X 32" TOP WITH PVC EDGE BAND-SMOKED KNOTTY ASH
LAMINATE
DIM: 24"W X 32"D X 1 1/4" THICK
LAMINATE: FORMICA SMOKED KNOTTY ASH 6440WR
EDGE BAND: 3MM THICK, REHAU COLOR CP4119
CORNERS: SQUARE
CORE: PARTICLE BOARD WITH BACKER SHEET
PREDRILL: FOR APOLLO 22X30 TABLE BASE
USAGE: USE WITH 22X30 APOLLO TABLE BASE
**NOTE: FINISHED GOODS CONTAINING COMPOSTIE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120, PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION**
CARTONING: INCLUDED
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: APOLLO DINING HEIGHT TABLE BASE-ULTRABRONZE
BASE: 22" X 30" BASE USING STEEL BAR STOCK, .5" THICK X 2"H
COLUMN: 3" DIA WELDED STEEL COLUMN
FINISH: ULTRABRONZE POWDERCOAT FINISH
MOUNT PLATE: 12" X12" STAMPED STEEL PLATE WELDED TO
COLUMN, LABOR SAVER
HEIGHT: 29" TO TOP OF MOUNT PLATE
GLIDES: ADJUSTABLE 1" PLASTIC GLIDES
USAGE: USE WITH 24" X 32" DINING TABLE TOP
CARTONING: BASES SHIP KD FOR ASSEMBLY IN THE FIELD,
HARDWARE TO ATTACH TOP TO BASE INCLUDED
LM/CK/HR UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: 36" DIA QUARTZ DINING TABLE TOP
DIM: 36"DIA X 1/2" THICK
QUARTZ PATTERN: BELVEDERE
EDGE: STRAIGHT WITH EASED EDGES TOP & BOTTOM
SUBTOP: 3/4" THICK MARINE PLYWOOD WITH ANGLED EDGE AND
PAINTED OFF WHITE TO BLEND WITH QUARTZ COLOR
USED WITH: BR-202B APOLLO TABLE BASE FROM GRAND RAPIDS
CHAIR
**NOTE: FINISHED GOODS CONTAINING COMPOSTIE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120, PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION**
PACKING: CRATING INCLUDED
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: APOLLO 32.5"H TABLE BASE-ULTRABRONZE
BASE: 33" X 33" BASE USING STEEL BAR STOCK, .5" THICK X 2"H
COLUMN: 3" DIA WELDED STEEL COLUMN
FINISH: ULTRABRONZE POWDERCOAT FINISH
MOUNT PLATE: 12" X 12" STAMPED STEEL PLATE WELDED TO
COLUMN, LABOR SAVER
HEIGHT: 32.5" TO TOP OF MOUNT PLATE
GLIDES: ADJUSTABLE 1" PLASTIC GLIDES
USAGE: USE WITH 36" DIA QUARTZ DINING TABLE TOP
CARTONING: BASES SHIP KD FOR ASSEMBLY IN THE FIELD
LM/CK/HR UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: 36" X 60" TOP WITH PVC EDGE BAND-SMOKED KNOTTY ASH
LAMINATE
DIM: 36"W X 60"D X 1 1/4" THICK
LAMINATE: FORMICA SMOKED KNOTTY ASH 6440WR
EDGE BAND: 3MM THICK, REHAU COLOR CP4119
CORNERS: SQUARE ON ONE SHORT END, OPPOSITE SHORT END
WITH 10" RADIUS CORNERS
CORE: PARTICLE BOARD WITH BACKER SHEET
PREDRILL: FOR 7005 CANTILEVER BASE ON SHORT END WITH
SQUARE CORNERS
USAGE: USE WITH BR-203B1 CANTILEVER BASE FROM GRC + BR-
203B2 BASE FROM WELLS
**NOTE: FINISHED GOODS CONTAINING COMPOSTIE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120, PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION**
CARTONING: INCLUDED
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: CANTILVER TABLE BASE TO SUPPORT END OF 60" X 36" TOP
BASE: L SHAPED BASE TO ATTACH TO WALL AND TABLE TOP
DIM: 2" SQUARE STEEL TUBING18"W X 33"D X 16"H WITH ANGLED
BRACKET FOR SUPPORT
FINISH: ULTRABRONZE
GLIDES: NOT APPLICABLE
USAGE: USE WITH 60" X 36" DINING TABLE TOP
INSTALLATION: HARDWARE TO ATTACH TOP TO BASE INCLUDED,
HARDWARE TO ATTACH BASE TO WALL PROVIDED BY GC
CARTONING: INCLUDED
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: END TABLE BASE FOR BR-203 BOOTH TOP
DIM: 28"W X 8"D X 28 1/2"H
BASE FRAME: 2 EACH 4" X 1" TAPERED TO 2" X 1" RECTANGULAR
IRON FOLDED LEGS ATTACHED TO 21"W X 8" D X 1/4" THICK MOUNT
PLATE ALL JOINTS WELDED WITH NO VISIBLE SEAMS
FRAME FINISH: #52 BLACK SAND POWDER COAT
TOP: 60" X 30" TOP BY OTHERS-BR-203 FROM GRAND RAPIDS CHAIR
GLIDES: 5/16 - 18 HEAVY DUTY ADJUSTABLE LEVELING GLIDES
CARTONING: INCLUDED
LM/CK/HR UPDATED 1/13/17
GLOBAL DESIGN
Specification
ITEM: METAL PARSON'S DINING TABLE-BRONZE W/ CREAM QUARTZ
TOP
DIM OVERALL: 36 1/8"W X 36 1/8"D X 28 3/4"H
BASE DIM: 36"W X 36"D X 28"H
BASE FRAME: 2" SQUARE STEEL TUBING LEGS WITH 1" SQUARE
TUBING AT TOP TO SUPPORT QUARTZ IN GRID PATTERN
BASE FINISH: SCRUFFY BRONZE TEXTURED POWDERCOAT FINISH #
DSTY-ULBR-122216
GLIDES: NYLON CAPS AT BASE OF LEGS
TOP: MARSTONE QUARTZ, PATTERN MARCREAM #MS-CRMA-BR204,
36" SQUARE X 3/4" THICK, POLISHED TOP AND STRAIGHT EDGES
WITH EASING
CARTONING: SHIPS ASSEMBLED IN CARTON
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: TUSK COUNTER STOOL W/ CORD SEAT
OVERALL DIMENSIONS: H: 33" W: 21.7" D: 19.4" SH: 22.2"
NON-EXPOSED FRAME: DECIDUOUS HARDWOOD
EXPOSED FRAME:
FINISH: SW009 AMERICAN WALNUT
LEG DIMENSIONS: H: 23.6"
SEAT: 1/4" DOUBLE BRAID BLACK CORD
GLIDES: YES, NYLON
*NOTE: (4) STRETCHERS- FRONT STRETCHER 7.25 FROM A.F.F. TO
TOP OF THE STRETCHER.
NOTE: STRAIGHT, NON-TAPERED, ROUND FRONT FOOT REST WITH
STAINLESS STEEL COVER IN #1 DARK BRONZE FINISH(ON FRONT
ONLY)
TOP COAT FINISH: SAYERLACK
FINISHED GOODS CONTAINING COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE
REGULATION.
LEAD TIME: 12-14 WEEKS
CARTONING INCLUDED
KE/BMC UPDATED 3/21/17
GLOBAL DESIGN
Specification
GLOBAL DESIGN
Specification
GLOBAL DESIGN
Specification
ITEM: DINING CHAIR
DIMENSIONS: (W) TOP: 18.31" (W) BOTTOM: 18.24" SEAT(W): 18" H:
33.28" D: 23" SD: 17.36" SH: 18"(FRONT) 17"(BACK)
WOOD SPECIES: EUROPEAN BEECH
COLOR: LIGHT DISTRESSED
FINISH: ACORN
TOP COAT: SAYER LACK SATIN POLYURETHANE, 20 GLOSS
GLIDES: YES, NYLON
STRETCHERS: (4)
FINISHED GOODS CONTAINING COMPOSITE WOOD PRODUCTS MUST
COMPLY WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT
AND CARTONS WILL BE LABELED IN ACCORDANCE WITH THIS
REGULATION.
KE/BMC UPDATED 3/10/17
GLOBAL DESIGN
Specification
ITEM: DINING CHAIR
DIMENSIONS: 23 3/8"W X 22 7/8"D X 31 3/8"H
SEAT HEIGHT: 19 1/8"H
FRAME: 18 GAUGE METAL
COLOR: ULTRA BRONZE
FINISH: POWDERCOAT
FOAM: 1" THICK 2550 GRADE
*NOTE: 1" HIGH RESILENCE FOAM
EXPOSED FRAME: VISIBLE WOOD ON BACK
COLOR: COCOA
FINISH: TOPCOAT SAYERLACK SATIN POLYURETHANE, 20 GLOSS
GLIDES: YES, NYLON
LEG DIMENSIONS: 12 3/8"(H)
FLAMMABILITY: MUST BE CERTIFIED TO COMPLY WITH CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LISTED.
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE. MEDIUM GREY COLORED
BELL SHAPED PENDANT WITH LOOP AT THE TOP HUNG FROM
DECORATIVE COLORED FABRIC CORD ATTACHED TO GREY
COLORED CANOPY.
OVERALL DIMENSIONS: 16.53" DIA X 17.3" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
GREY
SOCKET BASE TYPE: E26 MEDIUM
BULB INCLUDED: NO
TYPE: 10 WATT LED, 2700K, TCP #LED10A1927K(MI#259574)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BLACK FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 3/15/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 2700K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE
SMALL BLACK BELL SHAPED PENDANT WITH LOOP AT THE TOP
HUNG FROM DECORATIVE COLORED FABRIC CORD ATTACHED TO
BLACK CANOPY.
OVERALL DIMENSIONS: 13.78" DIA X 14.56" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
BLACK
SOCKET BASE TYPE: E26 MEDIUM
BULB INCLUDED: NO
TYPE: 10 WATT LED,2700K, TCP #LED10A19D27K(MI#259574)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BLACK FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 2700K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE- EXTRA SMALL SAND
COLORED BELL SHAPED PENDANT WITH LOOP AT THE TOP HUNG
FROM DECORATIVE COLORED FABRIC CORD ATTACHED TO SAND
CANOPY.
OVERALL DIMENSIONS: 8.66" DIA X 9.05" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
SAND
SOCKET BASE TYPE: E12 CANDELABRA
BULB INCLUDED: NO
TYPE: 5 WATT LED, 2700K, TCP #LED5E12G1627KF (MI#271427)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BROWN FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: ELITE SERIES CANDELABRA BASE LED, FROSTED GLOBE
BASE TYPE: CANDELABRA E12
WATTS: 5
INCANDESCENT WATTAGE EQUIVALENT: 40
VOLTAGE: 120
DIMMABLE: YES
OTHER: G16 SHAPE, 2700K, 3.5" LENGTH, 2.0" DIAMETER, 350
LUMENS, 80 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/CK 1/5/17
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE. SMALL GREY BELL SHAPED
PENDANT WITH LOOP AT THE TOP HUNG FROM DECORATIVE
COLORED FABRIC CORD ATTACHED TO GREY CANOPY.
OVERALL DIMENSIONS: 13.78" DIA X 14.56" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
GREY
SOCKET BASE TYPE: E26 MEDIUM
BULB INCLUDED: NO
TYPE: 10 WATT LED,2700K, TCP #LED10A19D27K(MI#259574)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BLACK FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 2700K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE- EXTRA SMALL WHITE BELL
SHAPED PENDANT WITH LOOP AT THE TOP HUNG FROM
DECORATIVE COLORED FABRIC CORD ATTACHED TO WHITE
CANOPY.
OVERALL DIMENSIONS: 8.66" DIA X 9.05" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
WHITE
SOCKET BASE TYPE: E12 CANDELABRA
BULB INCLUDED: NO
TYPE: 5 WATT LED, 2700K, TCP #LED5E12G1627KF (MI#271427)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE WHITE FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: ELITE SERIES CANDELABRA BASE LED, FROSTED GLOBE
BASE TYPE: CANDELABRA E12
WATTS: 5
INCANDESCENT WATTAGE EQUIVALENT: 40
VOLTAGE: 120
DIMMABLE: YES
OTHER: G16 SHAPE, 2700K, 3.5" LENGTH, 2.0" DIAMETER, 350
LUMENS, 80 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/CK 1/5/17
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE- EXTRA SMALL BLACK BELL
SHAPED PENDANT WITH LOOP AT THE TOP HUNG FROM
DECORATIVE COLORED FABRIC CORD ATTACHED TO BLACK
CANOPY.
OVERALL DIMENSIONS: 8.66" DIA X 9.05" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
BLACK
SOCKET BASE TYPE: E12 CANDELABRA
BULB INCLUDED: NO
TYPE: 5 WATT LED, 2700K, TCP #LED5E12G1627KF (MI#271427)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BLACK FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: ELITE SERIES CANDELABRA BASE LED, FROSTED GLOBE
BASE TYPE: CANDELABRA E12
WATTS: 5
INCANDESCENT WATTAGE EQUIVALENT: 40
VOLTAGE: 120
DIMMABLE: YES
OTHER: G16 SHAPE, 2700K, 3.5" LENGTH, 2.0" DIAMETER, 350
LUMENS, 80 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/CK 1/5/17
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE. MEDIUM SAND COLORED
BELL SHAPED PENDANT WITH LOOP AT THE TOP HUNG FROM
DECORATIVE COLORED FABRIC CORD ATTACHED TO SAND
COLORED CANOPY.
OVERALL DIMENSIONS: 16.53" DIA X 17.3" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
SAND
SOCKET BASE TYPE: E26 MEDIUM
BULB INCLUDED: NO
TYPE: 10 WATT LED, 2700K, TCP #LED10A1927K(MI#259574)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BROWN FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 3/15/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 2700K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: WALL SCONCE WITH FIXED ANGLED CONICAL
SHADE
MODEL NUMBER: 70030726BRSTR
MODEL NAME: CUSTOM CHARLTON SCONCE
OVERALL DIMENSIONS: 8" H X 9.33" W X 15.8" D
ROUND BACKPLATE DIMENSIONS: 5.19" DIA X 1" D
HORIZONTAL SUPPORT ARM DIMENSIONS: 5" L X 3/8" ROUND TUBING.
MATERIAL AND FINISH COLOR: PAINTED ANTIQUE BRASS
SWITCH TYPE: HARDWIRED
SOCKET BASE TYPE: MEDIUM BASE E26
BULB INCLUDED: NO
TYPE: 10 WATT LED, 3000K, TCP #LED10A19D30K (MI#254785)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
VOLTAGE: 120
LISTING: UL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 3000K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: PENDANT FOR COMMUNAL TABLE. MEDIUM SAND COLORED
BELL SHAPED PENDANT WITH LOOP AT THE TOP HUNG FROM
DECORATIVE COLORED FABRIC CORD ATTACHED TO SAND
COLORED CANOPY.
OVERALL DIMENSIONS: 16.53" DIA X 17.3" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
SAND
SOCKET BASE TYPE: E26 MEDIUM
BULB INCLUDED: NO
TYPE: 10 WATT LED, 2700K, TCP #LED10A1927K(MI#259574)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BROWN FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 3/15/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 2700K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
Specification
ITEM: CEILING FIXTURE FOR OVER BUFFET
MODEL NUMBER: 70030728ABRSTR
MODEL NAME: VINTAGE BARN FLUSHMOUNT - ANTIQUE BRASS
OVERALL DIMENSIONS: DIA: 18" X H: 13.5"
CANOPY DIMENSIONS: DIA: 6.5" X H: 1.5"
BODY MATERIAL AND COLOR: PAINTED ANTIQUE BRASS, STEEL AND
ALUMINUM
SOCKET BASE TYPE: MEDIUM BASE E26, CERAMIC
BULB INCLUDED: NO
TYPE: 10 WATT LED, 3000K, TCP #LED10A19D30K(MI#254785)
QUANTITY: 1
MAXIMUM WATTAGE: 60
VOLTAGE: 120
SWITCH TYPE: HARDWIRED
WEIGHT: 12.1 LBS
DAMP RATED
UL LISTED
CARTONING INCLUDED
CG/BMC UPDATED 1/6/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 3000K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: S2876-16.v2, S2877-16, S2880-16.v2, S2885-16.v2
ARTIST NAME: PI STUDIO
PUBLISHER: PI FINE ARTS
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 42"W x 50"H
FRAME MFR: PI 2607792
FRAME SIZE:
FRAME MATERIAL: BLACK BARN GRAIN
NOTE: 4 INDIVIDUAL PIECES ON MAGNETIC MATERIAL, FINE EDGE,
INCLUDES CUSTOM STORAGE SYSTEM FOR PIECES NOT IN USE. 4
SEASONAL QUOTES
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA/CM 3/1/2017
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: BANQUETTE WALL I
ARTIST NAME: ARTIST NAME: PROPRIETARY IMAGE OWNED BY
MARRIOTT, MAY NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 32"W x 40"H
FRAME MATERIAL: UPCYCLED PRINTED SPECIALTY PLANKS WITH
SILVER LEAF, NO FRAME, FLOAT OFF WALL
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA/CM 3/1/2017
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: BANQUETTE WALL II
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, MAY
NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 32"W x 40"H
FRAME MATERIAL: UPCYCLED PRINTED SPECIALTY PLANKS WITH
SILVER LEAF, NO FRAME, FLOAT OFF WALL
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA/CM 3/1/2017
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: BANQUETTE WALL III
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, MAY
NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 32"W x 40"H
FRAME MATERIAL: UPCYCLED PRINTED SPECIALTY PLANKS WITH
SILVER LEAF, NO FRAME, FLOAT OFF WALL
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA/CM 3/1/2017
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: BANQUETTE WALL IV
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, MAY
NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 32"W x 40"H
FRAME MATERIAL: UPCYCLED PRINTED SPECIALTY PLANKS WITH
SILVER LEAF, NO FRAME, FLOAT FROM WALL
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA/CM 3/1/2017
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: BANQUETTE WALL V
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, MAY
NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 32"W x 40"H
FRAME MATERIAL: UPCYCLED PRINTED SPECIALTY PLANKS WITH
SILVER LEAF, NO FRAME, FLOAT OFF WALL
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA/CM 3/1/2017
GLOBAL DESIGN
Specification
ITEM: 65" LED FLAT PANEL HD PRO-CENTRIC, PRO: IDIOM WITH
INTEGRATED B-LAN
COLOR: BLACK
SCREEN SIZE: 64.53" DIAGONAL
DIMENSIONS:
WITH STAND: W: 57.5" H: 35.4" D: 11.6"
WITHOUT: W: 57.5" H: 33.4" D: 2.3"
BASE: STATIONARY BASE
BRIGHTNESS: 228 CD/M2
RESOLUTION: 1920 X 1080
CONTRAST RATIO: 1,400: 1
FRAME RATE: 240HZ
300MM X 300MM VESA
TRIPLE XD ENGINE
ASPECT RATIO: 5 MODES
USB CLONING
ENERGY STAR 7.0
SPEAKERS: BUILT IN, 10 WATTS EACH, 20 TOTAL
REMOTE INCLUDED
WARRANTY: PARTS AND LABOR: 3 YRS
CARTONING INCLUDED
BV/CK 8/24/15
GLOBAL DESIGN
Specification
ITEM: WALL MOUNTING BRACKET
DESCRIPTION: TV WALL MOUNT FOR LED AND LCD TV'S 37" TO 75"
MODEL: SF650 - FLAT MOUNT
COLOR: BLACK
UNIVERSAL BRACKETS
DIMENSIONS: 30.87"W X 16.89"H X 1.25"D
BV/CK
GLOBAL DESIGN
GLOBAL DESIGN
Employee Dining
GLOBAL DESIGN
Specification
ITEM: EMPLOYEE DINING STACK CHAIR
STYLE: POPCORN 6711 COLOR COFFEE BEAN (CFB)
SEAT HEIGHT: 16.5"H
OVERALL DIMENSIONS: 20"W x 23.5"D x 32.5"H
FRAME: CHROME PLATED 1/2" DIAMETER STEEL FRAME
SEAT: ONE PIECE POLYPROPYLENE SHELL INCLUDES CUTOUT FOR
EASY CLEANING
CAL 133 COMPLIANT
RATED 300LB CAPACITY
LIFETIME WARRANTY
CARTONING INCLUDED
*NOTE: CHAIRS ARE PACKED IN CARTONS OF FOUR (4), CARTONS
CAN BE SPLIT UP/NO MINIMUM ORDER.
BV/CK 1/15/16
GLOBAL DESIGN
Specification
ITEM: 36" ROUND TABLE TOP
DIM: 36" DIA X 1 1/4" THICK
LAMINATE: FORMICA SMOKED KNOTTY ASH 6440-WR
EDGE: 3MM PVC, PATTERN - CP41119
PREDRILL: FOR SPARTAN SP30X30 TABLE BASE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120, PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION**
CARTONING: INCLUDED
LM/HR
GLOBAL DESIGN
Specification
ITEM: SPARTAN X TABLE BASE
DIM: 30"W X 30"D X 28 3/4"H
BASE: 30 X 30 SPREAD, CAST IRON
COLUMN: 3"DIA STEEL
TOP PLATE: STEEL
FINISH COLOR: BLACK WRINKLE
GLIDES: CARPET
ASSEMBLY: SHIPS KD, HARDWARE TO ASSEMBLE BASE IS INCLUDED
CARTONING: INCLUDED
LM/HR
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: EMPLOYEE BREAK ROOM A
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, NOT BE
USED IN ANY OTHER BRAND
PUBLISHER: PI FINE ARTS
IMAGE SIZE: 38"W x 12"H
OVERALL FRAMED DIMENSIONS: 38"W x 12"H x 1 3/4"D PLUS IMAGE
ALONG SIDES
FRAME MFR: CANVAS WRAPPED ON GALLERY BARS WITH HARD
MASONITE BACKING
MOUNTING: HORIZONTAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: PROPRIETARY IMAGE OWNED BY MARRIOTT, NOT BE
USED IN ANY OTHER BRAND
ARTIST NAME: PI STUDIO
PUBLISHER: PI FINE ARTS
IMAGE SIZE: 38"W x 12"H
OVERALL FRAMED DIMENSIONS: 38"W x 12"H x 1 3/4"D PLUS IMAGE
ALONG SIDES
FRAME MFR: CANVAS WRAPPED ON GALLERY BARS WITH HARD
MASONITE BACKING
MOUNTING: HORIZONTAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Lobby Lounge
GLOBAL DESIGN
Specification
ITEM: PUBLIC SPACE SOFA
DIMENSIONS: TTL H: 32"(INCLUDES CUSHION) W: 84" D: 34" ARM
HEIGHT: 24" SH: 18" SD: 22" SEAT CUSHION H: 8" W: 69"(33" EACH
CUSHION) ARM W: 8" BACK CUSHION: 5"(D) UPHOLSTERED FRONT
RAIL: 3 1/2"(H) FRAME HEIGHT: 30"
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LABELLED.
NON-EXPOSED FRAME: DECIDUOUS HARDWOOD
EXPOSED FRAME FINISH: MAPLE
COLOR: SF-6226 WALNUT HEIGHTS
TOP COAT: CATALYZED LACQUER
GLIDES: YES, NYLON
ROUND LEG DIMENSIONS: 6"(H) 2 1/4"(DIA)
*NOTE: INSET 5 3/4" FROM SIDES
FOAM: 8.5" THICK HR FOAM WITH 2.5 DENISTY/35ILD COMPRESSION
WRAPPED IN 1.25OZ DACRON.
MANUFACTURING DETAILS: TIGHT UPHOLSTERED BACK, ARMS AND
FRONT PANEL; (2) LOOSE BOX STYLE SEAT CUSHIONS WITH
WATERFALL EDGES AND VERTICAL TUCKS AT CORNERS AND D-
RINGS AND CLIPS HORIZONTAL TUCKS WHERE FRONT OF THE ARM
MEETS THE TOP OF THE ARM; EXPOSED WOOD BASE AND ROUND
LEGS' TRILLIUM FILL OR EQUAL TO BE USED.
PRIMARY UPHOLSTERY:
MFR: BURCH FABRICS GROUP
PATTERN: WOVEN
COLOR: MANILA (MI#271020)(PVC)
YARDAGE REQUIRED: 14 YDS
BASE DIM: 28" UPPER TO 34" LOWER
*NOTE: BULLNOSE REVERSIBLE SEAT CUSHION 1/ 1.8 DENSITY 32
COMPRESSION ON FOAM CORE.
**FINISHED GOODS CONTAINING COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE
REGULATION.**
CARTONING INCLUDED
KE/BMC/HR/BMC UPDATED 3/10/17
GLOBAL DESIGN
Specification
ITEM: CUBE IN CUBE METAL SOFA TABLE
DIM: 66"W X 16"D X 32"H
FRAME: 3/4" SQUARE IRON FOLDED FORMING TWO OPEN CUBES, ALL
JOINTS WELDED WITH NO VISIBLE SEAMS
FRAME FINISH: #52 BLACK SAND POWDER COAT
TOP: 2 CM THICK CREMA MARFIL PATTERN QUARTZ TOP, 42"W X 16"D
X 2 CM THICK
GLIDES: HEAVY DUTY NYLON CARPET GLIDES
CARTONING: INCLUDED
LM/CK/HR 1/13/17
GLOBAL DESIGN
Specification
ITEM: ACCENT CHAIR W/SPINDLE BACK & ARMS (LM-203)
DIMENSIONS: FRAME: 29-29.5"(H), 34.25"-34.5"(W), 31.5" TOTAL(D)
BASE: 1 3/4"-2"(H) 17.25"(SH), 21 3/4"(SD) ARM: 24.5"(H)
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LABELLED.
NON-EXPOSED FRAME: DECIDUOUS HARDWOOD
EXPOSED FRAME FINISH: EUROPE BEECH
COLOR: SF-6226 WALNUT HEIGHTS
ROUND TAPERED LEG: 8 1/2"-9"(H) 1 7/8"- 1 3/4"(TOP) 1 1/4"(BOTTOM)
NOTE: HEIGHT INCLUDING LOOSE BACK CUSHION 31 1/4"-32 1/3"
GLIDES: YES, NYLON
CONSTRUCTION DETAILS: SEAT & BACK CUSHION REVERSIBLE
CUSHION W/2 SNAPS @ BACK TO SECURE TO FRAME. FOAM: SEAT
6.5" THICK HR FOAM 2.3 DENSITY & 33
COMPRESSION(CHARTER)PILLOWS & BACK CUSHION W/BLOWN
FIBER
SEAT: DENSITY 2.5 HR, ILD 21-25 BACK & PILLOW: LUXURY BLOWN IN
FIBER 2.17 FILL WEIGHT INSERT(FLEXSTEEL)
NOTE: CONCEALED ZIPPERS, BACK CUSHION : 28"(W) X 16"(H)
PRIMARY UPHOLSTERY: (SEAT, LOOSE BACK & KIDNEY PILLOW
18"(W) X 14"(H))
MFR: FIL DOUX
PATTERN: CEDROS
COLOR: #72 (MI#270883)
YARDAGE REQUIRED: 5.1 YDS
KIDNEY PILLOW: (1) 18"(W) X 14"(H)
FABRIC:
MFR: EDELMAN LEATHER
PATTERN: CAVALLANI-C17
COLOR: RICH BROWN C17 (MI#271511)
YARDAGE: .8 YDS
**FINISHED GOODS CONTAINING COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE
REGULATION.
CARTONING INCLUDED
KE/BMC/HR/BMC UPDATED 3/10/17
GLOBAL DESIGN
Specification
ITEM: 36" DIA COCKTAIL TABLE W/QUARTZ TOP
DIM OVERALL: 36"DIA X 16"H
TOP: MARSTONE QUARTZ, PATTERN MARCREAM #MS-CRMA-BR204,
36" DIA X 3/4" THICK, POLISHED TOP AND STRAIGHT EDGES WITH
EASING
LEGS: 4 EACH SOLID MAPLE LEGS WITH TAPERED SHAPE AND
ANGLED SHAPE AT TOP WHERE LEG JOINS TOP
LEG FINISH: STAINED TO MATCH WILSONART WALNUT HEIGHTS 7965
GLIDES: CARPET GLIDES
*NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION.
CARTONING: SHIPS ASSEMBLED IN CARTON
LM/CK/HR UPDATED 1/13/17
GLOBAL DESIGN
Specification
ITEM: PUBLIC SPACE LOUNGE CHAIR W/ METAL BASE
DIMENSIONS: TTL H: 36" TTL W: 31" D: 32"
AH: 22" SH: 18" SW: TBD"
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LABELLED.
DECIDUOUS HARDWOOD: YES
EXPOSED FRAME FINISH: MAPLE
BASE: METAL
COLOR: PC-14
GLIDES: YES; NYLON
LEG DIMENSION: 3/4" DIA
DETAILED MANUFACTURING CONSTRUCTION DETAILS: TIGHT
UPHOLSTERED BACK, ARMS, AND FRONT PANEL; ONE LOOSE BOXED
STYLE SEAT CUSHION. 4" THICK HR FOAM SEAT CUSHION WITH 2.3
DENSITY AND 33ID COMPRESSION COVERED WITH 1 OZ DACRON
TOP STITCH AT ALL EXPOSED SEAMS. STAINLESS STEEL ROUND
TUBE FRAME @19MM DIA X 1.5 MM T. FIXED GLIDES
PRIMARY UPHOLSTERY: (BODY)
MFR: FABRIC INNOVATIONS
PATTERN: NO DIRECTIONS
COLOR: FUEGO (MI#271530)
YARDAGE REQUIRED: 4 1/2 YDS
FINISHED GOODS CONTAINING COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE
REGULATION.
CARTONING INCLUDED
KE/BMC/HR/BMC UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: DINING CHAIR
DIMENSIONS: (W) TOP: 18.31" (W) BOTTOM: 18.24" SEAT(W): 18" H:
33.28" D: 23" SD: 17.36" SH: 18"(FRONT) 17"(BACK)
WOOD SPECIES: EUROPEAN BEECH
COLOR: LIGHT DISTRESSED
FINISH: ACORN
TOP COAT: SAYER LACK SATIN POLYURETHANE, 20 GLOSS
GLIDES: YES, NYLON
STRETCHERS: (4)
FINISHED GOODS CONTAINING COMPOSITE WOOD PRODUCTS MUST
COMPLY WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT
AND CARTONS WILL BE LABELED IN ACCORDANCE WITH THIS
REGULATION.
KE/BMC UPDATED 3/10/17
GLOBAL DESIGN
Specification
ITEM: BOX STYLE SEAT CUSHION
EDGE TYPE: NO WELT
OVERALL SIZE: 60"(W) X 24"(D) X 6"(H)
MANUFACTURING DETAILS: SEAT CUSHION AT FIREPLACE IN
LOBBY.6"(H) BOX STYLE SEAT CUSHION WITH 5.5" ULTRACELL, 2.5
DENSITY/45 COMPRESSION FOAM WRAPPED IN .75 OZ DACRON ON
BOTTOM AND FRONT; GRIP TACK ATTACHED TO THE BOTTOM SIDE
OF THE CUSHION TO PREVENT SLIPPING. DOUBLE NEEDLE
STITCHING AT ALL EXPOSED SEAMS. CONCEALED ZIPPER. 1 PER
CARTON.
CUSHION FABRIC:
MFR: FIL DOUX
PATTERN: CEDROS
COLOR: #72 (MI#270883)
ORIENTATION: OTHER
WIDTH: 54"
REPEAT: N/A
COMPOSITION: 79% POLYESTER, 21% ACRYLIC
ABRASION: ASTM D4157, #10 COTTON DUCK; 50,000 DOUBLE RUBS,
MINIMUM
BLOCKING: CFFA 4/FED.STD. 191A METHOD 5872; NO BLOCKING,
SLIGHT ADHESION
CLEANABILITY: CFFA 141; VERY SLIGHT STAIN, MINIMUM/GOOD TO
EXCELLENT, CLEANABILITY
COATING ADHESION: ASTM D751; 3LBS MINIMUM
COLD CRACK: CFFA 6A/FED.STD. 191A METHOD 5874; 20 DEGREES
FARENHEIT/NO CRACKING
COLORFASTNESS TO CROCKING: AATCC 8; DRY: CLASS 4.0/WET: Room Types Where This Is Used
CLASS 4.9 MINIMUM Public Space - Lobby Lounge LM-207
COLORFASTNESS TO LIGHT: AATCC 16. OPT 3; CLASS 4 AT 40
HOURS, MINIMUM
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND NFPA-260, WITH TEST RESULTS
AVAILABLE UPON REQUEST.
FLEXING: ASTM D2097/CFF A10; 25,000 CYCLE, NO APPRECIABLE
CRAZING, NO CRACKING
BACKING: ACRYLIC
TOP COAT FINISH: SOIL & STAIN
CLEANING CODE: (W) WATER/SOAP
ROLL SIZE: 55 LY
YARDAGE REQUIRED: 3 YDS
NOTE: TURKISH CORNERS
CARTONING INCLUDED
KE/BMC UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: 42" DIA X 25" TABLE AT FLEX SEATING AREA
DIM OVERALL: 42"DIA X 25"H
TOP: WILSONART UPTOWN WALNUT 7971 WITH SOLID MAPLE
LUMBER BANDED EDGE WITH REVERSE ANGLE SHAPE STAINED TO
MATCH LAMINATE
BASE: CONE SHAPED BASE WITH WALNUT VENEER STAINED TO
MATCH LAMINATE WITH 1 1/4" BRONZE POWDERCOAT RING TO
CREATE GAP BETWEEN BASE & TOP
GLIDES: CARPET GLIDES
CARTONING: SHIPS ASSEMBLED IN CARTON
NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD PRODUCTS
MUST COMPLY WITH CALIFORNIA CODE OF REGULATIONS 93120.
PRODUCT AND CARTONS WILL BE LABELED IN ACCORDANCE WITH
THIS REGULATION.
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: 20"DIA NESTING TABLE
DIM: 20"DIA X 20"H
TOP: 3/16" THICK STEEL TOP
TOP FINISH: #52 BLACK SAND POWDERCOAT
BASE: 3 EACH 2 1/2" W X 3/4" THICK SOLID MAPLE LEGS FORMING
SLED STYLE BASE AT BOTTOM OF TABLE; TOP OF LEGS VISIBLE AT
METAL TABLE TOP
BASE STAIN: WALNUT STAIN TO MATCH WILSONART WALNUT
HEIGHTS 7965K
GLIDES: HEAVY DUTY NYLON CARPET GLIDES
CARTONING: INCLUDED
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: 24"DIA NESTING TABLE
DIM: 24"DIA X 16"H
TOP: 3/16" THICK STEEL TOP
TOP FINISH: #52 BLACK SAND POWDERCOAT
BASE: 3 EACH 2 1/2" W X 3/4" THICK SOLID MAPLE LEGS FORMING
SLED STYLE BASE AT BOTTOM OF TABLE; TOP OF LEGS VISIBLE AT
METAL TABLE TOP
BASE STAIN: WALNUT STAIN TO MATCH WILSONART WALNUT
HEIGHTS 7965K
GLIDES: HEAVY DUTY NYLON CARPET GLIDES
CARTONING: INCLUDED
LM/CK 12/30/16
GLOBAL DESIGN
Specification
ITEM: 6 SEAT LOUNGE/MEETING TABLE
DIM: 85"W X 37"D X 30"H, 28 1/2" CLEARANCE UNDER TABLE EDGE
BASE FRAME: 4" X 1" TAPERED TO 2" X 1" RECTANGULAR IRON
TUBING LEGS, 3/4" DIA IRON FOLDED STRETCHER BETWEEN IN
DOUBLE Y SHAPE TO CONNECT LEGS; ALL JOINTS WELDED WITH NO
VISIBLE SEAMS
FRAME FINISH: #52 BLACK SAND POWDER COAT
TOP: 3 CM THICK GRAY QUARTZ TOP, 85"W X 37"D X 3 CM THICK WITH
3/4" THICK MDF SUBTOP 79"W X 31"D X 3/4" THICK TO SUPPORT
QUARTZ TOP
GLIDES: 5/16 - 18 HEAVY DUTY ADJUSTABLE LEVELING GLIDES
PACKING: BASE IS CARTONED, TOP IS CRATED
ASSEMBLY: TOP IS ATTAACHED TO BASE IN FIELD, HARDWARE
PACKED WITH BASE
*NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION.
LM/CK/HR UPDATED 1/13/17
GLOBAL DESIGN
Specification
ITEM: PENDANT IN LOBBY. LARGE SAND COLORED BELL SHAPED
PENDANT WITH LOOP AT THE TOP HUNG FROM DECORATIVE
COLORED FABRIC CORD ATTACHED TO SAND COLORED CANOPY.
OVERALL DIMENSIONS: 21.65" DIA X 22.44" H
CANOPY DIMENSIONS: 5.5" DIA X 1" H
BODY AND CANOPY MATERIAL AND COLOR: ALUMINUM, PAINTED
SAND
SOCKET BASE TYPE: E26 MEDIUM
BULB INCLUDED: NO
TYPE: 13 WATT LED,2700K, TCP#LED13A2127K(MI#268254)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: HARDWIRED
VOLTAGE: 120
CORD: 13' ADJUSTABLE BROWN FABRIC CORD
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
**SPECIAL NOTE: THESE BELL LAMP FIXTURES ARE PRODUCED AND
TRADEMARKED BY NORMAN COPENHAGEN OUT OF DENMARK AND
THROUGH A SPECIAL AGREEMENT WILL BE SOURCED IN THE U.S. BY
CHALLENGER LIGHTING.
CARTONING INCLUDED
CG/BMC UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A21 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 13
INCANDESCENT WATTAGE EQUIVALENT: 75
VOLTAGE: 120
DIMMABLE: NO
OTHER: A21 SHAPE, 2700K, 4.9" LENGTH, 2.6" DIAMETER, 1,100
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC UPDATED 10/21/16
GLOBAL DESIGN
Specification
GLOBAL DESIGN
Specification
ITEM: HISTORY WALL
DIMENSIONS: 54" X 54"
-PREMIUM FINE-WEAVED BURLAP WRAPPED ON 1/2" WOOD PANEL
SECURITY HARDWARE: COMES WITH "J" RAIL AT THE TOP AND
LOCKING CHANNELS AT THE BOTTOM
MOUNT FRAMELESS PRINTS: TEXTURED BURLAP BOARD, KNOTTED
PINEWOOD, CANVAS, STRANDBOARD, METAL, ACRYLLIC CUTOUT
-EACH PIECE FLOATED ON CUSTOM BARS (3/4"D X 2 1/2"W) SPACED
WITH 1" BURLAP BORDER ALL AROUND EACH ITEM
-PACKAGING INCLUDED
-STANDARD LEAD TIME IS 8 WEEKS
BV/CK 3/9/17
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: LOBBY CORRIDOR
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, MAY
NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 44"W x 60"H
FRAME MFR: SPECIALTY TEXTURED CANVAS, DEEP MOUNT WITH
EXPOSED PAINTED BLACK BEVELED EDGE
FRAME SIZE:
FRAME MATERIAL: PIF87-7712
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: LOBBY CORRIDOR
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, MAY
NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 44"W x 60"H
FRAME MFR: SPECIALTY TEXTURED CANVAS, DEEP MOUNT WITH
EXPOSED PAINTED BLACK BEVELED EDGE
FRAME SIZE:
FRAME MATERIAL: PIF87-7712
MOUNTING: VERTICAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: 65" LED FLAT PANEL HD PRO-CENTRIC, PRO: IDIOM WITH
INTEGRATED B-LAN
COLOR: BLACK
SCREEN SIZE: 64.53" DIAGONAL
DIMENSIONS:
WITH STAND: W: 57.5" H: 35.4" D: 11.6"
WITHOUT: W: 57.5" H: 33.4" D: 2.3"
BASE: STATIONARY BASE
BRIGHTNESS: 228 CD/M2
RESOLUTION: 1920 X 1080
CONTRAST RATIO: 1,400: 1
FRAME RATE: 240HZ
300MM X 300MM VESA
TRIPLE XD ENGINE
ASPECT RATIO: 5 MODES
USB CLONING
ENERGY STAR 7.0
SPEAKERS: BUILT IN, 10 WATTS EACH, 20 TOTAL
REMOTE INCLUDED
WARRANTY: PARTS AND LABOR: 3 YRS
CARTONING INCLUDED
BV/CK 8/24/15
GLOBAL DESIGN
Specification
ITEM: WALL MOUNTING BRACKET
DESCRIPTION: TV WALL MOUNT FOR LED AND LCD TV'S 37" TO 75"
MODEL: SF650 - FLAT MOUNT
COLOR: BLACK
UNIVERSAL BRACKETS
DIMENSIONS: 30.87"W X 16.89"H X 1.25"D
BV/CK
GLOBAL DESIGN
GLOBAL DESIGN
Specification
GLOBAL DESIGN
Meeting Room
GLOBAL DESIGN
Specification
ITEM: BOARDROOM TABLE
MODEL NUMBER: GB10WS-TWL/TU2 - ALBA BOAT SHAPED TABLE
WITH SCULPTED LEG BASE
EDGE: SELF EDGE
DIMENSIONS: 120"W x 48"D x 29"H
LAMINATE: TIGER WALNUT (TWL)
FINISH: TIGER WALNUT LAMINATE
LEG: LEGS ARE INCLUDED IN PRICE
LEG FINISH: TUNGSTEN (TU)
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: INFLEX CHAIR ARMLESS WITH CASTERS
MODEL: 974 FC8 AO US FG1 C13 AC
DIMENSIONS: 20"W x 22"D x 33"H
ENTIRE PIECE MUST MEET: CA117
CONSTRUCTION DETAILS: METAL FRAME WITH SLATE POWDER
COAT PAINT FINISH. MOLDED POLYPROPYLENE
SEAT FRAME: METAL FRAME SLATE FINISH
SEAT: UPHOLSTERED IN GRADE 1 HIGHLAND COTTAGE 100%
POLYVINYL
SEAT FOAM: FABRICATED POLYURETHANE
CASTERS: 50MM BLACK DUAL WHEEL
PRIMARY UPHOLSTERY: (PROVIDED BY SUPPLIER)
SEAT
MFR: SITONIT
PATTERN: HIGHLAND
COLOR: COTTAGE
WARRANTY: CHAIR: LIFETIME; FABRIC/FOAM: 5 YEAR
ANSI/BIFMA: MEETS OR EXCEEDS ANSI/BIFMAX5.1-2002
OTHER: GREENGUARD CERTIFIED
PACKAGING: CHAIRS SHIP FULLY ASSEMBLED ONE PER CARTON
BV/CK 1/10/17
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: MEETING ROOM 1
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, NOT BE
USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 62"W x 42"H
FRAME MFR: SPECIALTY TEXTURED CANVAS, DEEP MOUNT WITH
EXPOSED PAINTED BLACK BEVELED EDGE
FRAME SIZE:
FRAME MATERIAL: PIF87-7712
MOUNTING: HORIZONTAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: MEETING ROOM 2
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, NOT BE
USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 62"W x 42"H
FRAME MFR: SPECIALTY TEXTURED CANVAS, DEEP MOUNT WITH
EXPOSED PAINTED BLACK BEVELED EDGE
FRAME SIZE:
FRAME MATERIAL: PIF87-7712
MOUNTING: HORIZONTAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Office Area
GLOBAL DESIGN
Specification
ITEM: 3 DRAWER LATERAL FILE CABINET
DIMENSIONS: 36"W x 40.5"H x 19.25"D
CATALOG #: 1936P-3F12
FINISH: LIGHT GREY (LGR)
PULL: SLIMLINE SATIN ALUMINUM HANDLES
DRAWERS: (3)- SIDE TO SIDE HANGING FILE BARS INCLUDED
CARTONING: INCLUDED
FA/FA
GLOBAL DESIGN
Specification
TYPE: MIDBACK TASK CHAIR W/SWIVEL TILT-ADJUSTABLE HEIGHT &
WIDTH ARMS
MODEL #: 5622TA93B1Z2MC1B8
DIMENSIONS: 27.3"W x 25"D x 35"H
ADJUSTABLE ARMS: YES
SEAT HEIGHT ADJUSTMENT: 17.5" - 21.25"
UPHOLSTERY: (PROVIDED BY VENDOR)
SEAT:
MFR.: MOMENTUM TEXTILES
PATTERN: MARATHON
COLOR: STORM
YARDAGE REQUIRED:
BACK: BLACK MESH WITH SILVER BACK SUPPORT BARS
ARM CONSTRUCTION AND FINISH: BUILT IN HEIGHT AND WIDTH
ADJUSTMENT AND URETHANE ARM PAD. EACH ARM IS
INDEPENDENTLY ADJUSTABLE FOR HEIGHT AND WIDTH.
BASE CONSTRUCTION AND FINISH: SILVER 5 LEG WITH CASTERS
CASTERS: 5MM MOLDED NYLON DOUBLE WHEEL CARPET CASTER IN
BLACK
CONTROL: SWIVEL TILT CONTROL MECHANISM WITH TILT TENSION
CONTROL AND UPRIGHT POSITION TILT LOCK
SEAT: 10-PLY 5/8" MOLDED PLYWOOD
SEAT FOAM: MOLDED HR, 3" THICK, DENSITY: 3.0; IFD: 25
WEIGHT: RATED TO HOLD 300 POUNDS
FLAMMABILITY RATING: CAL 117 STANDARD
GREENGUARD CERTIFIED
WARRANTY:
CHAIR: LIMITED LIFETIME
FABRIC/FOAM: 5 YEAR WARRANTY
NOTE: CHAIRS SHIP UNASSEMBLED, MUST INSTALL GAS CYLINDER
INTO 5-PRONG BASE
CARTONING INCLUDED
BV/CK 12/21/16
GLOBAL DESIGN
Specification
ITEM: DESK-DOUBLE PEDESTAL
MODEL NUMBER: SL6030DS-AEL(1)-SL22HBF-AEL(2)
DIMENSIONS: 60"W x 30"D x 29"H
DOUBLE PEDESTAL DESK: SL22HBF-AEL (2)
FINISH: AMERICAN ESPRESSO LAMINATE (AEL)
WITH FULL MODESTY PANEL
FA/FA
GLOBAL DESIGN
Specification
ITEM: FREELANCE GUEST CHAIR WITH ARMS
MODEL: 5214FSAC3
DIMENSIONS: 25"W x 24"D x 33 1/4"H
ENTIRE PIECE MUST MEET: CA117
CONSTRUCTION DETAILS:
SEAT FRAME: 1" O.D. STEEL TUBE (14GA) SILVER FINISH
SEAT: 5 PLY-1/2" MOLDED PLYWOOD
SEAT FOAM: THICKNESS: OVERALL 1"; DENSITY/IFD: 3.0/50
BACK: INNER: 7 PLY-7/16" MOLDED PLYWOOD; OUTER: 3 PLY-3/16"
MOLDED PLYWOOD
BACK FOAM: THICKNESS: OVERALL 1"; DENSITY/IFD: 1.9/31
ARMS: MOLDED POLYURETHANE - BLACK FINISH
PRIMARY UPHOLSTERY: (PROVIDED BY SUPPLIER)
SEAT & BACK:
MFR: MOMENTUM TEXTILES
PATTERN: MARATHON
COLOR: STORM
WARRANTY: CHAIR: LIFETIME; FABRIC/FOAM: 5 YEAR
ANSI/BIFMA: MEETS OR EXCEEDS ANSI/BIFMAX5.1-2002
OTHER: GREENGUARD CERTIFIED
PACKAGING: 3 PER CARTON
BV/CK 12/21/16
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: TABLE LAMP WITH ROUND TAPERED DRUM
SHADE
OVERALL DIMENSIONS: 29" H X 13.5" W
BASE DIMENSIONS: 9" DIA X 1.25" H
VERTICAL STEM DIMENSIONS: 1" ROUND TUBING X 22" H
MATERIAL AND FINISH COLOR: POWDER COAT BASE WITH PAINTED
ANTIQUE BRASS FINISH, STEEL
PROTECTIVE COATING: YES, LACQUER
SOCKET BASE TYPE: MEDIUM E26
BULB INCLUDED: NO
TYPE: 10 WATT LED, 3000K, TCP #LED10A19D30K(MI#254785)
QUANTITY: 1
MAXIMUM WATTAGE: 40 WATTS
VOLTAGE: 120
SWITCH TYPE: BLACK ROCKER SWITCH LOCATED ON TOP OF BASE
CONVENIENCE OUTLETS: YES, (2) LOCATED ON TOP OF BASE ON
OPPOSITE SIDES
CORD: 8' BLACK CORD WITH 2-PRONG PLUG, EXITS BACK OF BASE
HARP SIZE: 9"
FINIAL SIZE: 1" DIA X .5" H
SHADE: PROVIDED BY SUPPLIER, SEE BELOW
SHAPE: TAPERED DRUM
DIMENSIONS: 13.5" BOTTOM DIA. X 11" TOP DIA. X 11" SLANT
MATERIAL AND COLOR: TC LINEN (BEIGE) ON HARDBACK
1/4" MATCHING TRIM ON TOP & BOTTOM
DIFFUSERS: NO
LISTING: UL AND CUL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC/HR/BMC UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 3000K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: OFFICE ART
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, NOT BE
USED IN ANY OTHER BRAND
PUBLISHER: PI FINE ARTS
IMAGE SIZE: 39"W x 27"H
OVERALL FRAMED DIMENSIONS: 39 1/2""W x 27 1/2"H
FRAME MFR: GALLERY WRAPPED CANVAS HARD MASONITE BACKING
FRAME SIZE: 1" FLOATER FRAME PIF333BLK
FRAME MATERIAL: BLACK POLY
MOUNTING: HORIZONTAL
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: OFFICE ART A
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, NOT BE
USED IN ANY OTHER BRAND
PUBLISHER: PI FINE ARTS
IMAGE SIZE: 27"W x 27"H
OVERALL FRAMED DIMENSIONS: 27 1/2"W x 27 1/2"H
FRAME MFR: GALLERY WRAPPED CANVAS HARD MASONITE BACKING
FRAME SIZE: 1" FLOATER FRAME PIF333BLK
FRAME MATERIAL: BLACK POLY
MOUNTING: SQUARE
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: OFFICE ART B
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, NOT BE
USED IN ANY OTHER BRAND
PUBLISHER: PI FINE ARTS
IMAGE SIZE: 27"W x 27"H
OVERALL FRAMED DIMENSIONS: 27 1/2"W x 27 1/2"H
FRAME MFR: GALLERY WRAPPED CANVAS HARD MASONITE BACKING
FRAME SIZE: 1" FLOATER FRAME PIF333BLK
FRAME MATERIAL: BLACK POLY
MOUNTING: SQUARE
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: WALL CLOCK
DESCRIPTION: ROUND 16 INCH GALVANIZED METAL RIM WITH GLASS
FACE ON WHITE DIAL AND BLACK ARABIC NUMBERS AND EXTRA
LARGE OPEN SPOKE HOUR AND SECOND HAND
PRODUCT #: 4379401ZWA
DIMENSIONS: 16" DIAMETER X 2" DEPTH
WARRANTY: 90 DAY WARRANTY
BATTERY OPERATED: 1 - AA BATTERY, NOT INCLUDED.
GC/CK 1/12/17
GLOBAL DESIGN
California
GLOBAL DESIGN
Specification
ASSESS $5 RECYLING FEE FOR TV'S THAT MEASURE 35" AND
LARGER DIAGONALLY
BV/HR
GLOBAL DESIGN
Specification
ASSESS $4 RECYLING FEE FOR TV'S THAT MEASURE MORE THAN 15"
AND LESS THAN 35" DIAGONALLY
BV/HR
GLOBAL DESIGN
Specification
CARPET STEWARDSHIP ASSESSMENT
GLOBAL DESIGN
Specification
CARPET STEWARDSHIP ASSESSMENT
GLOBAL DESIGN
Specification
CARPET STEWARDSHIP ASSESSMENT
GLOBAL DESIGN
Carpet
GLOBAL DESIGN
Specification
ITEM: CARPET - LOBBY INSET
CONSTRUCTION: WOVEN AXMINSTER
PATTERN NUMBER: FX11973-10
JOB#: 161505
COLOR NUMBER(S): 8 COLORS: 1=E310/31D, 2=E312/33D, 3=E313/34D,
4=E314/37D, 5=K322/14I, 6=J324, 7=J326, 8=E316
CUSTOM DESIGN/COLOR: YES - STRIKE OFF #: FX11973-10
WIDTH: 12' W - EJ
PATTERN REPEAT: V: 240" H: 144"
ROWS: 8 ROW
FINISHED PILE HEIGHT: .250"
YARN PLY: 2/52 DEWSBURY
YARN COMPOSITION: 100% NYLON TYPE 6.6
DYE TECHNIQUE: SKEIN
FINISHED FACE WEIGHT: 29.1 OZ/SY
TOTAL FINISHED WEIGHT: 57.5 OZ/SY
TOTAL THICKNESS: 0.355"
BACKING: 100% SYNTHETIC POLYESTER AND POLYPROPYLENE
YARN DENIER: N/A
YARN DENSITY: N/A
ALL CARPET MUST MEET:
COLOR FASTNESS: 4-5
LIGHT FASTNESS: 4-5
FLAMMABILITY: CLASS 1 ASTM E-648
TUFT BIND: N/A
SOIL/STAIN TREATMENTS: YES
OTHER TOPICAL TREATMENTS:
WEAR WARRANTY: 10 YEAR LIMITED WEAR WARRANTY
OTHER WARRANTIES:
COO:
QUANTITY MUST BE VERIFIED BY INSTALLER
GC/CK 1/12/17
GLOBAL DESIGN
Specification
ITEM: PADDING FOR GLUE-DOWN INSTALLATION
AREA: GUESTROOM/LOBBY/MEETING ROOM/CORRIDOR/ADMIN
OFFICE/EXERCISE ROOM(EXCEPT WHEN USING RUBBER FLOORING)
STYLE: TREDMOR-2568QL
OUNCE WEIGHT: 68 OZ
COLOR: BLACK
DENSITY: 22 LBS.
THICHKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
ROLL SIZE: 54"W X 60'L = 30 SY
SHIPPING WEIGHT: 138 LBS
PILL TEST: PASS
MOISTURE RESISTANCE: 98%
COMPRESSION LOAD DEFLEC: 8 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
BACKING: QUICK LIFT
TOP: POLYTEC
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED-LIFE OF CARPET
NOTE: MUST BE ORDERED IN 30 SQUARE YARD INCREMENTS
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATED 05.29.12) Room Types Where This Is Used
Public Space - Carpet LM-003
Public Space - Carpet MR-003
Corridor - Corridor Carpet PG-003ALT1
Corridor - Corridor Carpet PG-003ALT2
Corridor - Corridor Carpet PG-003ALT3
GLOBAL DESIGN
Specification
ITEM: CARPET - MEETING ROOM AND BREAKFAST ROOM IN
RENOVATIONS
CONSTRUCTION: WOVEN AXMINSTER
PATTERN NUMBER: FX12542-5
JOB#: 161505
COLOR NUMBER(S): 8 COLORS: 1=E310/31D, 2=E312/33D, 3=E313/34D,
4=E314/37D, 5=K322/14I, 6=J324, 7=J326, 8=E316
CUSTOM DESIGN/COLOR: YES - STRIKE OFF #: FX12542-5
WIDTH: 12' W
PATTERN REPEAT: H: 144" V: 144"
ROWS: 8 ROW
FINISHED PILE HEIGHT: .250"
YARN PLY: 2/52 DEWSBURY
YARN COMPOSITION: 100% NYLON TYPE 6.6
DYE TECHNIQUE: SKEIN
FINISHED FACE WEIGHT: 29.1 OZ/SY
TOTAL FINISHED WEIGHT: 57.5 OZ/SY
TOTAL THICKNESS: 0.355"
BACKING: 100% SYNTHETIC POLYESTER AND POLYPROPYLENE
YARN DENIER: N/A
YARN DENSITY: N/A
ALL CARPET MUST MEET:
COLOR FASTNESS: 4-5
LIGHT FASTNESS: 4-5
FLAMMABILITY: CLASS 1 ASTM E-648
TUFT BIND: N/A
SOIL/STAIN TREATMENTS: YES
OTHER TOPICAL TREATMENTS:
WEAR WARRANTY: 10 YEAR LIMITED WEAR WARRANTY
OTHER WARRANTIES:
COO:
QUANTITY MUST BE VERIFIED BY INSTALLER
GC/CK 1/12/17
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR PUBLIC SPACE CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X209C
COLOR #: X209C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X209C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Public Space - Carpet MR-002B
Public Space Alternate - Options Options OA-001BOPT
Corridor - Corridor Carpet PG-002BALT1
Corridor - Corridor Carpet PG-002BALT3
Corridor Alternate - Corridor Options Corridor PG-007BOPT
Options
GLOBAL DESIGN
Specification
ITEM: PADDING FOR GLUE-DOWN INSTALLATION
AREA: GUESTROOM/LOBBY/MEETING ROOM/CORRIDOR/ADMIN
OFFICE/EXERCISE ROOM(EXCEPT WHEN USING RUBBER FLOORING)
STYLE: TREDMOR-2568QL
OUNCE WEIGHT: 68 OZ
COLOR: BLACK
DENSITY: 22 LBS.
THICHKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
ROLL SIZE: 54"W X 60'L = 30 SY
SHIPPING WEIGHT: 138 LBS
PILL TEST: PASS
MOISTURE RESISTANCE: 98%
COMPRESSION LOAD DEFLEC: 8 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
BACKING: QUICK LIFT
TOP: POLYTEC
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED-LIFE OF CARPET
NOTE: MUST BE ORDERED IN 30 SQUARE YARD INCREMENTS
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATED 05.29.12) Room Types Where This Is Used
Public Space - Carpet LM-003
Public Space - Carpet MR-003
Corridor - Corridor Carpet PG-003ALT1
Corridor - Corridor Carpet PG-003ALT2
Corridor - Corridor Carpet PG-003ALT3
GLOBAL DESIGN
Specification
ITEM: BOH/STAIRS CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X965B
COLOR NUMBER(S): X965B
CUSTOM: YES
WIDTH: 12'
PATTERN REPEAT: V: 36" H: 48"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.246"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 36 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- U PATTERN
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
ITEM: PADDING FOR STRETCH-IN INSTALLATION
AREA: PUBLIC SPACE ALT. TO TREDMOR-2568
STYLE: GRANITE IV
OUNCE WEIGHT: 68 OZ
COLOR: BEIGE
DENSITY: 22 LBS.
THICKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
ROLL SIZE: 54"W X 60'L = 30 SY
COMPRESSION LOAD DEFLECTION: 12 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
BACKING: POLYESTER NON-WOVEN
IMPACT NOISE REDUCTION RATING: +15
IMPACT INSULATION CLASS RATING: 66
MAXIMUM COMPRESSION SET: 10%
THERMAL R-VALUE: .40
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED - LIFE OF CARPET
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATED 05.29.12)
GLOBAL DESIGN
Drapery
GLOBAL DESIGN
Specification
ITEM: FABRIC FOR SHEER
PATTERN: NIANTIC SHEER
COLOR: MARBLE
FABRIC ORIENTATION: N/A
PATTERN IS TO RUN: NON DIRECTIONAL
WIDTH: 118"
REPEAT: H: 0" V: 0"
CONTENT: 100% POLYESTER
LIGHT FASTNESS, 40 HOURS GRADE 4
TENSILE STRENGTH, 25 POUNDS
LIGHT, 60 HRS, GRADE 4
MEETS NFPA-701 TEST 1
CLEANING CODE: W: WATER/SOAP X: DRY CLEAN
COO: TURKEY
NFPA 260 COMPLIANT
ROLL SIZE: 50 YDS
CARTONING INCLUDED
AS/BMC
GLOBAL DESIGN
Specification
ITEM: FABRIC SHEER
PATTERN: ALISON
COLOR: SLATE
DRAPERY FABRIC ORIENTATION: RAILROADED
WIDTH: 117"
REPEAT: H: 0" V: 0"
CONTENT: 100% POLYESTER
MEETS: NFPA 701
CLEANING CODE: (S) SOLVENT FREE CLEANER
ROLL SIZE: 50 YDS
COO: TURKEY
CARTONING INCLUDED
AS/BMC UPDATED 12/7/16
GLOBAL DESIGN
Specification
MATERIAL CLASS: FABRIC
TYPE: BUDGET BLACKOUT
COLOR: IVORY/ECRU
WIDTH: 110"
CONTENT:
COATING ADHESION, 3 LBS MIN.
COLD CRACK, 20 DEGREES FAHRENHEIT /NO CRACKING
SEAM STRENGTH: 25 LBS MIN (WOVENS), 35 LBS MIN (NON WOVENS),
30X25 LBS MIN (KNITS)
TEAR STRENGTH
4 LBS. MIN. (WOVEN BACKING)
TENSILE: 50 LBS
BLACKOUT-NO DIM OUT
CLEANING CODE: X (DRY CLEAN)
FLAME TEST: NFPA-701 AND BFDIX-1
ROLL SIZE: 50 YDS
COO: USA
LEAD TIME: 2-3 WEEKS
AS/BMC
GLOBAL DESIGN
Options
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR PUBLIC SPACE CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X209C
COLOR #: X209C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X209C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Public Space - Carpet MR-002B
Public Space Alternate - Options Options OA-001BOPT
Corridor - Corridor Carpet PG-002BALT1
Corridor - Corridor Carpet PG-002BALT3
Corridor Alternate - Corridor Options Corridor PG-007BOPT
Options
GLOBAL DESIGN
Restrooms
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: CORRIDOR WALL SCONCE WITH CYLINDER
SHAPED ACRYLIC SHADES ON TOP AND BOTTOM OF CENTRALLY
LOCATED BACK PLATE
OVERALL DIMENSIONS: 28" H X 4.5" W X 4" D
BACKPLATE DIMENSIONS: 9" H X 4.5" W X 5/8" D
CENTRAL SHADE CONNECTION MOUNT: 5 3/8" H X 3" DIA
MATERIAL AND FINISH COLOR: PLATED ANTIQUE BRASS
SWITCH TYPE: HARDWIRED
SOCKET BASE TYPE: (2) INTEGRATED LED PANELS. EACH PANEL IS 8
WATTS, 670 LUMENS (1,340 TOTAL), 3000K COLOR TEMP.
BULB INCLUDED: YES
QUANTITY: 2
MAXIMUM WATTAGE: 16 WATTS
VOLTAGE: 120
SHADES: (2) PROVIDED WITH FIXTURE, SEE BELOW:
SHAPE: CYLINDER
SIZE: (2) AT 2.75" DIA X 11.5" H
MATERIAL AND COLOR: FROSTED WHITE ACRYLIC WITH
DECORATIVE METAL MESH DIFFUSER END CAPS
SHADE ATTACHMENT: EACH SHADE SCREWS INTO CENTRALLY
LOCATED SHADE CONNECTION MOUNT.
LISTING: UL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC/HR UPDATED 1/17/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: 40" x 40" MIRROR
PRODUCT: NON BEVELLED MIRROR
OVERALL DIMENSIONS: 40"W x 40"H x 1/2"D
FRAME MFR: PI FINE ART
FRAME SIZE: 7/8"W
FRAME MATERIAL: METAL
FRAME COLOR: ANTIQUED BRASS
FRAME MODEL NO:
GLASS: MIRROR
GLASS SIZE: 37 1/4"W x 37 1/4"H
TEMPERED GLASS: YES
BEVEL: N/A
MOUNTING: SQUARE
HANGING METHOD: 3 POINT SECURITY HARDWARE TO BE INCLUDED
NOTE: MFR TO CLEARLY MARK EACH MIRROR WITH ITEM ID AND
REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE.
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Wall Covering
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - MAIN LOBBY & PUBLIC RESTROOMS
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: NO
PATTERN: MAR236
COLOR: TWEED
EMBOSSING: CANVAS
WIDTH: 52"-54"
REPEAT: H: N/A V: N/A
INSTALLATION NOTE: RANDOM REVERSIBLE
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: NON-WOVEN
FILM BASE COLOR: WHITE
INK TYPE/APPLICATION: WATER-BASED INKS
TOP COAT: CLEAR ACRYLIC TOPCOAT
RECYCLED CONTENT: YES; 10% POST-CONSUMER RECYCLED
CONTENT
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 12/7/16
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: WALL MURAL - WOMEN'S PUBLIC RESTROOM
MMINIMUM ORDER QUANTITY: 1
CUSTOM: YES
PATTERN: MAR241 WOMEN'S RR MURAL
OVERALL DIMENSIONS: 106"W X 106"H FINISHED WHICH INCLUDES A
2" BLEED ON ALL SIDES
IMAGE SIZE: 102"W X 102"H
NUMBER OF MURAL PANELS: 2 PANELS; EACH 51"W X 102"H
FINISHED + 2" BLEED ON ALL SIDES
WIDTH: N/A
TYPE/WEIGHT: TYPE II/20 OZ.
BACKING: POLYESTER/PULP NON-WOVEN
EMBOSSING: ARTIST CANVAS
FILM BASE COLOR: WHITE
INK TYPE/APPLICATION: UV CURED INKJET DIGITAL PRINT
REPEAT: N/A
FSR ASTM E-84, CLASS A REQUIRED: YES
TOP COAT: N/A
RECYCYLED CONTENT: N/A
INSTALLATION NOTE: OVERLAP, DOUBLE CUT
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
MURAL PACKAGING: ROLLED ON 3" CORE AND BOXED; 2-3 MURALS
PACKED PER BOX; ONLY LIKE MURALS PACKED TOGETHER (SAME
SIZE, IMAGE AND HAND); BOX LABELED WITH CONTENT AND
QUANTITY; BOXES PALLETIZED; 36 BOXES PER PALLET (6'W X 6'H).
CARTONING INCLUDED IN COST
GC/CK 1/11/17
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: WALL MURAL - MEN'S PUBLIC RESTROOM
MMINIMUM ORDER QUANTITY: 1
CUSTOM: YES
PATTERN: MAR242 MEN'S RR MURAL
OVERALL DIMENSIONS: 106"W X 106"H FINISHED WHICH INCLUDES A
2" BLEED ON ALL SIDES
IMAGE SIZE: 102"W X 102"H
NUMBER OF MURAL PANELS: 2 PANELS; EACH 51"W X 102"H
FINISHED + 2" BLEED ON ALL SIDES
WIDTH: N/A
TYPE/WEIGHT: TYPE II/20 OZ.
BACKING: POLYESTER/PULP NON-WOVEN
EMBOSSING: ARTIST CANVAS
FILM BASE COLOR: WHITE
INK TYPE/APPLICATION: UV CURED INKJET DIGITAL PRINT
REPEAT: N/A
FSR ASTM E-84, CLASS A REQUIRED: YES
TOP COAT: N/A
RECYCYLED CONTENT: N/A
INSTALLATION NOTE: OVERLAP, DOUBLE CUT
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
MURAL PACKAGING: ROLLED ON 3" CORE AND BOXED; 2-3 MURALS
PACKED PER BOX; ONLY LIKE MURALS PACKED TOGETHER (SAME
SIZE, IMAGE AND HAND); BOX LABELED WITH CONTENT AND
QUANTITY; BOXES PALLETIZED; 36 BOXES PER PALLET (6'W X 6'H).
CARTONING INCLUDED IN COST
GC/CK 1/11/17
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - CORRIDOR DOOR DROP/MEETING ROOM MAIN
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: NO
PATTERN: MAR233
COLOR: MOONLIGHT
EMBOSSING: KNOTTY SILK
WIDTH: 54"
REPEAT: H: N/A V: N/A
INSTALLATION NOTE: RANDOM REVERSIBLE
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: OSNABURG
FILM BASE COLOR: OFF-WHITE
INK TYPE/APPLICATION: SOLVENT-BASED INKS
TOP COAT: INCLUDED IN INK APPLICATION PROCESS
RECYCLED CONTENT: 10%
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 12/7/16
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - ELEVATOR LOBBY UPPER FLOORS ONLY / LOBBY
CORNER MARKET
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: NO
PATTERN: MAR234
COLOR: WOOD CIRCLES
EMBOSSING: SCRATCHES
WIDTH: 54"
REPEAT: H: 26" V: 20"
INSTALLATION NOTE: STRAIGHT ACROSS MATCH
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: NON-WOVEN
FILM BASE COLOR: STONE
INK TYPE/APPLICATION: WATER BASED LOW VOC AQUA-CLEAR INKS
TOP COAT: ROLLER APPLIED AQUA-CLEAR 3.0 TOP FINISH FOR
IMPROVED STAIN RESISTANCE
RECYCLED CONTENT: YES; CONTAINS 7% POST-CONSUMER
RECYCLED CONTENT
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS, SCS INDOOR
ADVANTAGE GOLD CERTIFIED, CA PROP 65 COMPLIANT
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 12/7/16
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - LOBBY HEARTH SCHEME - MODERN CALM
SCHEME
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: YES
PATTERN: MAR237
COLOR: SMOKEWOOD
EMBOSSING: SUEDE
WIDTH: 54"
REPEAT: H: 54" V: 18"
INSTALLATION NOTE: RANDOM MATCH
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: OSNABURG
FILM BASE COLOR: SAGE GREY
INK TYPE/APPLICATION: SOLVENT-BASED INKS
TOP COAT: TOPCOAT INCLUDED IN INK APPLICATION PROCESS
RECYCLED CONTENT: YES; 10% PRE-CONSUMER RECYCLED
CONTENT
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS, FORMALDEHYDE
FREE AND HEAVY METAL FREE
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 12/7/16
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - MEETING ROOM ACCENT
ROLL SIZE: 30 LY; MUST ORDER IN 30 LY INCREMENTS
CUSTOM: NO
PATTERN: MAR243
COLOR: WHITNEY
EMBOSSING: HERRINGBONE
WIDTH: 53"/54"
REPEAT: H: 10.4" V: 12"
INSTALLATION NOTE: REVERSIBLE STRAIGHT ACROSS MATCH
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: OSNABURG
FILM BASE COLOR: GREY FILM
INK TYPE/APPLICATION: WATER-BASED LOW VOC AQUA-CLEAR INKS
TOP COAT: ROLLER APPLIED AQUA-CLEAR 3.0 TOP FINISH
RECYCLED CONTENT: YES; 7% POST-CONSUMER RECYCLED
CONTENT
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS, SCS INDOOR
ADVANTAGE GOLD CERTIFIED, CA PROP 65 COMPLIANT
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 1/12/17
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - FITNESS ROOM MAIN
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: NO
PATTERN: MAR238
COLOR: WHITECAP
EMBOSSING: TAHITI
WIDTH: 54"
REPEAT: H: 52" V: 24"
INSTALLATION NOTE: NON-REVERSIBLE 2/3 DROP MATCH
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: OSNABURG
FILM BASE COLOR: BRIGHT WHITE
INK TYPE/APPLICATION: SOLVENT-BASED INKS
TOP COAT: TOPCOAT INCLUDED IN INK APPLICATION PROCESS
RECYCLED CONTENT: YES; 10% PRE-CONSUMER RECYCLED
CONTENT
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS, FORMALDEHYDE
FREE AND HEAVY METAL FREE
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 12/15/16
GLOBAL DESIGN
Specification
ITEM: WALL PANEL - FITNESS ROOM ACCENT
ROLL SIZE: 4' X 10' ROLLED SHEET
MINIMUM ORDER QUANTITY: 1 FULL PANEL; MUST ORDER IN
INCREMENTS OF A FULL PANEL; ROLLED PANELS SHOULD BE LAID
FLAT FOR AT LEAST 24 HOURS UNDER TYPICAL SITE CONDITIONS
PRIOR TO INSTALL TO RELAX.
CUSTOM: NO
PATTERN: MAR239
COLOR: SILVER
EMBOSSING: HURLEY
WIDTH: 4' (4' X 10' FULL PANEL)
REPEAT: H: N/A V: N/A
INSTALLATION NOTE: APPLICATION OF MATERIAL IS INTERPRETED
AS ACCEPTANCE OF MATERIAL AND CONDITIONS OF INSTALLATION.
ENSURE SURFACES ARE DUST FREE, SMOOTH, DRY, FIRM AND
UNIFORMLY COLORED. FOLLOW INSTALLATION INSTRUCTIONS ON
SURFACE PREP.
DOUBLE CUT OVERLAP IN INCHES: ONE LONG AND ONE SHORT
EDGE OF EACH PANEL HAVE A 1/2" LIP FOR OVERLAPPING
CONSECUTIVE SHEETS. EACH SEAM MUST CONSIST OF USING BOTH
THE UNDERLYING LIP EDGE (ON FIRST PANEL INSTALLED) AND THEN
OVERLAYING THAT LIP WITH THE FACTORY NON-LIP OPPOSING
EDGE (ON THE SECOND PANEL). SMOOTH TO SET. FOLLOW
INSTRUCTIONS FOR MORE DETAIL. WIPE OFF EXCESSIVE ADHESIVE
USING WATER AND A CLEAN CLOTH OR SPONGE WHILE ADHESIVE IS
STILL WET.
TYPE/WEIGHT: 10 LBS PER SHEET
FSR: CLASS A
BACKING: N/A
FILM BASE COLOR: SILVER
INK TYPE/APPLICATION: N/A
TOP COAT: N/A
RECYCLED CONTENT: N/A
PACKAGING: ROLLED SHEET GOODS
CARTONING: N/A
GC/CK 12/15/16
GLOBAL DESIGN
Exercise Room
GLOBAL DESIGN
Specification
ITEM: BENCH FOR FITNESS ROOM
DIM: 72"W X 18"D X 18"H
WOOD: POPLAR SOLIDS
FINISH: KH 22084-C TO MATCH OILED LEGNO LAMINATE; 10 SHEEN
WITH POLYURETHANE TOP COAT
TOP AND OUTSIDE BACK: 4 EACH 4" WIDE AND 1 EACH 2" WIDE SOLID
POPLAR PLANKS
LAMINATE AT BASE: ANSONART, PATTERN: 36837; COLOR:
PLUMBAGO OR FORMICA GRAPHITE 857-58
CUBBIES AT FRONT: 3 OPEN CUBBIES FACED WITH LAMINATE,
CENTER CUBBY 28" CLEAR OPENING FOR YOGA MATS (NOT
INCLUDED WITH BENCH)
BASE AT FRONT & SIDES: RECESSED, 2 1/4"H FACED WITH LAMINATE
EDGES: SEALED FOR MOISTURE RESISTANCE
GLIDES: 6 EACH ADJUSTABLE LEVELING GLIDES FOR HARD SURFACE
FLOORING
**NOTE: FOR PROPERTIES IN CALIFORNIA - FINISHED GOODS
CONTAINING COMPOSITE WOOD PRODUCTS MUST COMPLY WITH
CALIFORNIA CODE OF REGULATIONS 93120, PRODUCT AND
CARTONS WILL BE LABELED IN ACCORDANCE WITH THIS
REGULATION**
CARTONING INCLUDED
LM/HR
GLOBAL DESIGN
Specification
ITEM: 43" LED FLAT PANEL HD PRO-CENTRIC, PRO: IDIOM WITH
INTEGRATED B-LAN FOR GUESTROOM
COLOR: BLACK BEZEL
SCREEN SIZE: 43" DIAGONAL
VESA PATTERN: 200MM X 200MM
DIMENSIONS:
WITH STAND: W: 38.30" H: 24.56" D: 12.79"
WITHOUT: W: 38.30" H: 22.55" D: 2.16"
BASE: 180 DEGREE ALL METAL SWIVEL
FRAME RATE: T 120HZ
RESOLUTION: 1920 X 1080
CONTRAST RATIO: 1,000,000: 1
SPEAKERS: BUILT IN, 10 WATTS EACH, 20 TOTAL
REMOTE INCLUDED
MPEG2/MPEG4, H264 DECODING
REAR JACKS: R/L AUDIO IN; COMPOSITE
VIDEO W/ L& R AUDIO INPUTS; PC AUDIO IN (PHONE JACKS);
RGB IN; DVI W/HDCP; S-VIDEO; RS-232 C; REMOTE SPEAKER OUT;
SP DIF IN/OUT (OPTICAL) 2 HDMI JACKS
SIDE JACKS: S-VIDEO; COMPOSITE VIDEO; AUDIO INPUTS; HI
RESOLUTION
COMPONENT; R/L AUDIO
COMPATIBLE TO RJP-101M, RJP-110F AND RJP-110S JACK PACK,
MPEG 2/MPEG 4 H.264 (FULL HD REAL TIME DECODING, AC3
DECODING)
ATSC/NTSC/QAM CLEAR TUNERS
COMPATIBLE W/FMA-LG101
KENSINGTON LOCK Room Types Where This Is Used
HDTV, XD ENGINE, DOLBY DIGITAL, CLEAR VOICE, ENERGY STAR 5.3, Public Space - Exercise Room RE-600
HDMI, PRO-IDIOM, PRO-CENTRIC, SRS (SURROUND SOUND) DYNAMIC
POWER SAVINGS, STATIC POWER SAVINGS, INTELLIGENT SENSOR,
ROHS COMPLIANT(LIMITED HEAVY METALS)
ENERGY STAR: 7.0
WARRANTY: PARTS AND LABOR: 3 YRS
CARTONING INCLUDED
BV/CK 4/14/15
GLOBAL DESIGN
Specification
ITEM: WALL MOUNTING BRACKET
DESCRIPTION: TV WALL MOUNT FOR LED TV'S 32" TO 56"
MODEL: ST640 - FLAT/TILT - TO 15 DEGREES
COLOR: BLACK
MAX LOAD: 175 POUNDS
DIMENSIONS BACK PLATE: 30.87"W X 9.15"H X 2.63"D
DIMENSIONS VERTICAL ADAPTERS: 1.25"W X 18.50"H X 2.63"D
BV/CK 1/23/15
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: TREADMILL CLASSIC-INTEGRITY
OVERALL DIMENSIONS: 37" WIDE X 83" LONG
ELECTRICAL: 120 VOLT, 20 AMP DEDICATED CIRCUIT
FINISH: PLATINUM
FULL COMMERCIAL TREADMILL
NOTE: REQUIRES DEDICATED NEMA 5-20 CORD
LEAD TIME: 45 DAYS
TV: INTEGRATED 15" PRO IDIOM TV ATTACHED WITH BRACKET
INCLUDED
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
INSTALLATION AND FREIGHT $802, INCLUDED IN PRICE
IPOD COMPATIBLE
HEART RATE MONITOR
WORK OUT PROGRAMS
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK UPDATED 5/10/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: TREADMILL-STANDARD T5X CFRST
OVERALL DIMENSIONS: 36.5"W X 84.6"L X 58"H
ELECTRICAL: 100-125VAC, 50-60HZ, 20AMP DEDICATED CIRCUIT
(2.5KW MAXIMUM). THE OUTLET SHOULD BE A NEMA 5-20R. THE HOT,
NEUTRAL, AND GROUND MUST ALL BE INDEPENDENTLY ISOLATED
(NOT LOOPED OR TIED TO OTHER CIRCUITS)
FEATURES: T5X CFRST STANDARD TREADMILL WITH INTEGRATED
15" TV PROGRAMS, HEART RATE, AND ASSET MANAGEMENT, IPOD
CHARGING
TV: INTEGRATED 15" TV ATTACHED WITH BRACKET
CONNECTIVITY: CABLE TV ACCESS POINT
NOTE: AS A PART OF THE STANDARD, 15" TV INCLUDED IN PRICE
LEAD TIME: 4-6 WEEKS
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
DELIVERY AND INSTALL: $350 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK 4/18/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: TREADMILL JOG NOW 700 VISIOWEB & IPOD
OVERALL DIMENSIONS: 33"W X 82"L X 56"H
ELECTRICAL: 110V 5-20R , 60HZ, 20AMP - NEMA 5-20R / NEMA 5-20P.
ONE INDIVIDUAL CIRCUIT BRANCH FOR EACH TREADMILL. HOT-
NEUTRAL-GROUND INDEPENDENTLY ISOLATED
FEATURES: IN MOTION LIGHT FOR SAFETY, LOW RUNNING SURFACE
8" OFF THE GROUND, SMALL FOOTPRINT, FULLY INTEGRATED VISIO
TOUCH SCREEN
CONNECTIVITY: WIRELESS AND WIRED NETWORK READY
FINISH: N/A
NOTE: AS A PART OF THE STANDARD, 15" TV INCLUDED IN PRICE
LEAD TIME: 4-6 WEEKS
IPOD COMPATIBLE
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
DELIVERY AND INSTALL: $602.27 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS (PARTS/LABOR/WEAR & TEAR)
BV/CK UPDATED 6/4/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: ELLIPTICAL CROSSTRAINER, CLASSIC - INTEGRITY
DIMENSIONS: L: 83" W: 28" H: 61"
FINISH: PLATINUM
LEAD TIME: 45 DAYS
TV: INTEGRATED 15" PRO IDIOM TV ATTACHED WITH BRACKET
INCLUDED
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
INSTALLATION AND FREIGHT $402, INCLUDED IN PRICE
IPOD COMPATIBLE
HEART RATE MONITOR
WORK OUT PROGRAMS
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK UPDATED 5/10/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: ELLIPTICAL-STANDARD E5X CFRST
OVERALL DIMENSIONS: 29.2"W X 70"L X 68.5"H
ELECTRICAL: CAN BE SELF POWERED - POWERED BY A STANDARD
110/20 AMP CIRCUIT IS RECOMMENDED
FEATURES: E5X CFRST STANDARD ELLIPTICAL WITH INTEGRATED
15" TV PROGRAMS, HEART RATE, AND ASSET MANAGEMENT, IPOD
CHARGING
TV: INTEGRATED 15" TV ATTACHED WITH BRACKET
CONNECTIVITY: CABLE TV ACCESS POINT
NOTE: AS A PART OF THE STANDARD, 15" TV INCLUDED IN PRICE
LEAD TIME: 4-6 WEEKS
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
DELIVERY AND INSTALL: $350 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK 4/18/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: ELLIPTICAL-SYNCHRO 700 VISIOWEB & IPOD
OVERALL DIMENSIONS: 28"W X 81"L X 63"H
ELECTRICAL: 120V, 60HZ, 15AMP - NEMA 5-15R / NEMA 5-15P
FEATURES: HAND POSITIONS (ARMS MOVING LEVERS, ARMS ON
STATIONARY HAND GRIPS) FAST TRACK CONTROL ON ARM LEVERS,
DUAL HAND HR SENSORS, FULLY INTEGRATED VISIO TOUCH
SCREEN
CONNECTIVITY: WIRELESS AND WIRED NETWORK READY
FINISH: N/A
NOTE: AS A PART OF THE STANDARD, 15" TV INCLUDED IN PRICE
LEAD TIME: 4-6 WEEKS
IPOD COMPATIBLE
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
DELIVERY AND INSTALL: $587.39 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS (PARTS/LABOR/WEAR & TEAR)
BV/CK UPDATED 6/4/13
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: DUMBBELL RACK EXERCISE EQUIP
DIMENSIONS: D: 28" W: 54" H: 45"
FINISH: PLATINUM PAINT
MODEL: OSDB3 OPTIMA SERIES 3-TIER
DELIVERY AND INSTALL: $119 (INCLUDED IN TOTAL PRICE)NOTE:
USED IN CONJUNCTION WITH DUMBELLS, ITEM #235053 AND SMAB
BENCH ITEM #235054
10 YR STRUCTURAL FRAME WARRANTY
LEAD TIME: 45
BV/CK 6/4/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: G3 10 PAIR DUMBELL RACK-BENCHES AND RACKS
OVERALL DIMENSIONS: 28"W X 112"L X 35"H
ELECTRICAL: NONE
FEATURES: 2-TIER PRO STYLE DUMBBELL RACK - HOLDS 10 PAIRS
OF DUMBELLS
TV: NONE
CONNECTIVITY: NONE
LEAD TIME: 6-8 WEEKS
DELIVERY AND INSTALL: $125 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK 4/19/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: 10 PAIR DUMBELL RACK
OVERALL DIMENSIONS: 26"W X 99"L X 29"H
FEATURES: 10 PAIR ROUND HEAD DUMBBELLS
LEAD TIME: 4-6 WEEKS
DELIVERY AND INSTALL: $90.74 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS (PARTS/LABOR/WEAR & TEAR)
BV/CK UPDATED 6/4/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT - DUMBBELLS
TYPE: URETHANE DURA-BELL HEXAGONAL DUMBELLS
MODEL: DBU-5-50
INCREMENTS: 5, 10, 15, 20, 25, 30, 35, 40, 45, + 50 LBS. TOTAL 10 PAIRS
OTHER: DELIVERY AND INSTALLATION INCLUDED IN PRICE
BV/CK 8/13/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT - DUMBBELLS
TYPE: URETHANE DURA-BELL HEXAGONAL DUMBELLS
MODEL: DBU-5-50
INCREMENTS: 5, 10, 15, 20, 25, 30, 35, 40, 45, + 50 LBS. TOTAL 10 PAIRS
OTHER: DELIVERY AND INSTALLATION INCLUDED IN PRICE
BV/CK 9/4/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT - DUMBBELLS
TYPE: URETHANE DURA-BELL HEXAGONAL DUMBELLS
MODEL: DBU-5-50
INCREMENTS: 5, 10, 15, 20, 25, 30, 35, 40, 45, + 50 LBS. TOTAL 10 PAIRS
OTHER: DELIVERY AND INSTALLATION INCLUDED IN PRICE
BV/CK 9/4/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENTTYPE: MULTI-ADJUSTABLE
BENCHOVERALL DIMENSIONS: L:55" W:26" H:17"MODEL: SMABFINISH:
PLATINUM PAINT, BLACK UPHOLSTERYDELIVERY AND INSTALL:
$121.76 (INCLUDED IN TOTAL PRICE)NOTE: USED IN CONJUNCTION
WITH 5-50 LB RUBBER HEX DUMBELLS, SPEC # 235053 AND OSDB3
OPTIMA DUMBELL RACK, SPEC # 235055NOTE: 10 YR STRUCTURAL
FRAME 5YR PILLOW BLOCKS, 1 YR HARDWARE 90 DAYS
UPHOLSTERY, SPRINGS BELTS & ANY UNSPECIFIED ITEMSLEAD
TIME: 45BV/CK 6/4/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: G3 MULTI ADJUSTABLE BENCH-BENCHES AND RACKS
OVERALL DIMENSIONS: 27"W X 63"L X 21"H
ELECTRICAL: NONE
FEATURES: BENCH ADJUSTS -5 - 80 DEGREES, INTEGRATED WHEELS
AND TRANSPORT HANDLE
TV: NONE
CONNECTIVITY: NONE
LEAD TIME: 6-8 WEEKS
DELIVERY AND INSTALL: $125 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK 4/19/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: MULTI USE BENCH-ADJUSTABLE BENCH
OVERALL DIMENSIONS: 27"W X 47"L X 52"H
FEATURES: ADJUSTS WORKOUT ANGLE TO ACCOMMODATE A
VARIETY OF EXERCISE NEEDS, OFFERS PROPER SUPPORT DURING
FREE WEIGHT AND PLATE LOADED EXERCISES
LEAD TIME: 4-6 WEEKS
DELIVERY AND INSTALL: $77.06 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS (PARTS/LABOR/WEAR & TEAR)
BV/CK UPDATED 6/4/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: RECUMBENT LIFECYCLE, CLASSIC - INTEGRITY
DIMENSIONS: 51" H X 26" W X 54" L
FINISH: PLATINUM
LEAD TIME: 45 DAYS
TV: INTEGRATED 15" PRO IDIOM TV ATTACHED WITH BRACKET
INCLUDED
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
INSTALLATION AND FREIGHT $345, INCLUDED IN PRICE
IPOD COMPATIBLE
HEART RATE MONITOR
WORK OUT PROGRAMS
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK UPDATED 5/10/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: RECUMBENT BIKE-STANDARD R5X CFRST
OVERALL DIMENSIONS: 28.8"W X 63.2"L X 53.3"H
ELECTRICAL: CAN BE SELF POWERED - POWERED BY A STANDARD
110/20 AMP CIRCUIT IS RECOMMENDED
FEATURES: R5X CFRST STANDARD RECUMBENT BIKE WITH
INTEGRATED 15" TV PROGRAMS, HEART RATE, AND ASSET
MANAGEMENT, IPOD CHARGING
TV: INTEGRATED 15" TV ATTACHED WITH BRACKET
CONNECTIVITY: CABLE TV ACCESS POINT
NOTE: AS A PART OF THE STANDARD, 15" TV INCLUDED IN PRICE
LEAD TIME: 4-6 WEEKS
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
DELIVERY AND INSTALL: $200 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS PARTS & LABOR
BV/CK 4/18/13
GLOBAL DESIGN
Specification
ITEM: EXERCISE EQUIPMENT
TYPE: RECUMBENT BIKE-RECLINE 700 VISIOWEB & IPOD
OVERALL DIMENSIONS: 24"W X 63"L X 51"H
ELECTRICAL: 120V, 60HZ, 15AMP - NEMA 5-15R / NEMA 5-15P
FEATURES: WIDE WALK-THROUGH WITH 2.5" STEP-OVER HEIGHT,
FAST TRACK CONTROLS ON HANDGRIPS, FULLY INTEGRATED VISIO
TOUCH SCREEN
CONNECTIVITY: WIRELESS AND WIRED NETWORK READY
FINISH: N/A
NOTE: AS A PART OF THE STANDARD, 15" TV INCLUDED IN PRICE
LEAD TIME: 4-6 WEEKS
IPOD COMPATIBLE
TV CONTROLS BUILT IN; REMOTE NOT NEEDED
DELIVERY AND INSTALL: $401.39 (INCLUDED IN TOTAL PRICE)
WARRANTY: 4 YEARS (PARTS/LABOR/WEAR & TEAR)
BV/CK UPDATED 6/4/13
GLOBAL DESIGN
Specification
ITEM: WALL CLOCK
DESCRIPTION: ROUND 16 INCH GALVANIZED METAL RIM WITH GLASS
FACE ON WHITE DIAL AND BLACK ARABIC NUMBERS AND EXTRA
LARGE OPEN SPOKE HOUR AND SECOND HAND
PRODUCT #: 4379401ZWA
DIMENSIONS: 16" DIAMETER X 2" DEPTH
WARRANTY: 90 DAY WARRANTY
BATTERY OPERATED: 1 - AA BATTERY, NOT INCLUDED.
GC/CK 1/12/17
GLOBAL DESIGN
Indoor Pool
GLOBAL DESIGN
Specification
ITEM: OUTDOOR-SLING DINING CHAIR
DIMENSIONS: W: 25.5" D: 21.5" H: 40"
SH: 20.5" SD: 21.5" SH: 28.5"
TYPE: NESTING
METAL: TUBULAR, MIN. 18 GAUGE, .063 EXTRUDED TRIPLE HOLLOW
ALUMINUM TUBING
FINISH: POWDER COAT-STORM GREY
WARRANTY: 10 YEARS
FABRIC: GRAPHITE SLING FABRIC
COLOR: STORM GREY
CARTONING INCLUDED
AS/BMC/HR UPDATED 1/20/17
GLOBAL DESIGN
Specification
ITEM: OUTSIDE CHAISE LOUNGE FOR POOL
DIMENSIONS: W: 80.5" D: 30.5" H: 23.5"
SEAT DEPTH: 14" ARM HEIGHT: 23.5"
METAL: TUBULAR, MIN. 18 GAUGE, .063 TRIPLE HOLLOW ALUMINUM
TUBING
FINISH: POWDER COAT-STORM GREY
STRAP COLOR: GRAPHITE SLING FABRIC
MANUFACTURING CONSTRUCTION DETAILS: FULLY WELDED
ALUMINUM FRAME WITH POWDER COATED FINISH. SLING SEAT
MADE WITH WOVEN PVC POLYSTER IN GRAPHITE COLOR.
CARTONING INCLUDED
AS/BMC
GLOBAL DESIGN
Specification
ITEM: OUTDOOR COCKTAIL TABLE
DIMENSIONS: 18" H X 18" DIA
METAL: MIN. 18 GAUGE, 1" DIA X .080 THICK ALUMINUM TUBING
FINISH: STORM GREY
TOP: BOARDWALK
MANUFACTURING CONSTRUCTION DETAILS: FULLY WELDED
ALUMINUM FRAME WITH A STORM GREY POWDERCOATED FINISH.
TABLE TOP IS MADE FROM ALUMINUM. TABLE DOES NOT HAVE A
HOLE FOR AN UMBRELLA.
WARRANTY: 10 YEARS ON FRAME
CARTONING INCLUDED
AS/BMC UPDATED 10/30/15
GLOBAL DESIGN
Specification
ITEM: OUTDOOR TABLE FOR POOL WITHOUT HOLE
DIMENSIONS: 28" H X 42" DIAMETER ROUND
MATERIAL: FRAME: ALUMINUM; TUBLUAR, ROUND
METAL MIN. 18 GAUGE 1" DIAMETER X .080 THICK ALUMINUM TUBING
FINISH: STORM GREY
PATTERN: BOARDWWALK
DETAIL CONSTRUCTION: FULLY WELDED ALUMINUM FRAME WITH A
STORM GREY POWDER COATED FINISH. TABLE TOP IS MADE FROM
1/4" ALUMINUM WITH BOARDWALK PATTERN. THE TABLE TOP DOES
NOT HAVE A HOLE FOR UMBRELLA.
WARRANTY ON FRAME: 10 YEARS
CARTONING INCLUDED
AS/BMC
GLOBAL DESIGN
Specification
ITEM: TOWEL CADDY
SHELVING UNIT DIMENSIONS: 39"(W) X 21"(D) X 44"(H)
3 TOWEL SHELVES DIMENSIONS: 18"(W) X 12 1/4"(H)
SLING CART DIMENSIONS: 15 1/4"(W) 18"(D) X 28 1/4"(H)
ALUMINUM TYPE: 6063-T52, 20 X 20MM X 1.5MM
CASTERS: NYLON (WHEEL) & ZINC (HARDWARE)-SLING CART
FRAME COLOR: BJ #1400-1415 (HENNA 134)
FRAME TYPE: BJ #1428-3235
WEAVE MATERIALS: POLYETHYLENE
WEAVE UV HOURS: 3000
PACKING SPECS: 250 LBS AND DOUBLE WALL CARTON
HARDWARE: PLASTIC BAG INCLUDES; HEX WRENCH, BOLTS & BOLT
CAPS
ASSEMBLY INSTRUCTIONS TO BE PROVIDED WITH TOWEL CADDY
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120,PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION**
CARTONING INCLUDED
AS/BMC UPDATED 10/8/14
GLOBAL DESIGN
Outdoor Pool
GLOBAL DESIGN
Specification
ITEM: OUTSIDE CHAISE LOUNGE FOR POOL
DIMENSIONS: W: 80.5" D: 30.5" H: 23.5"
SEAT DEPTH: 14" ARM HEIGHT: 23.5"
METAL: TUBULAR, MIN. 18 GAUGE, .063 TRIPLE HOLLOW ALUMINUM
TUBING
FINISH: POWDER COAT-STORM GREY
STRAP COLOR: GRAPHITE SLING FABRIC
MANUFACTURING CONSTRUCTION DETAILS: FULLY WELDED
ALUMINUM FRAME WITH POWDER COATED FINISH. SLING SEAT
MADE WITH WOVEN PVC POLYSTER IN GRAPHITE COLOR.
CARTONING INCLUDED
AS/BMC
GLOBAL DESIGN
Specification
ITEM: OUTDOOR COCKTAIL TABLE
DIMENSIONS: 18" H X 18" DIA
METAL: MIN. 18 GAUGE, 1" DIA X .080 THICK ALUMINUM TUBING
FINISH: STORM GREY
TOP: BOARDWALK
MANUFACTURING CONSTRUCTION DETAILS: FULLY WELDED
ALUMINUM FRAME WITH A STORM GREY POWDERCOATED FINISH.
TABLE TOP IS MADE FROM ALUMINUM. TABLE DOES NOT HAVE A
HOLE FOR AN UMBRELLA.
WARRANTY: 10 YEARS ON FRAME
CARTONING INCLUDED
AS/BMC UPDATED 10/30/15
GLOBAL DESIGN
Specification
ITEM: TOWEL CADDY
SHELVING UNIT DIMENSIONS: 39"(W) X 21"(D) X 44"(H)
3 TOWEL SHELVES DIMENSIONS: 18"(W) X 12 1/4"(H)
SLING CART DIMENSIONS: 15 1/4"(W) 18"(D) X 28 1/4"(H)
ALUMINUM TYPE: 6063-T52, 20 X 20MM X 1.5MM
CASTERS: NYLON (WHEEL) & ZINC (HARDWARE)-SLING CART
FRAME COLOR: BJ #1400-1415 (HENNA 134)
FRAME TYPE: BJ #1428-3235
WEAVE MATERIALS: POLYETHYLENE
WEAVE UV HOURS: 3000
PACKING SPECS: 250 LBS AND DOUBLE WALL CARTON
HARDWARE: PLASTIC BAG INCLUDES; HEX WRENCH, BOLTS & BOLT
CAPS
ASSEMBLY INSTRUCTIONS TO BE PROVIDED WITH TOWEL CADDY
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120,PRODUCT AND CARTONS WILL BE LABELED IN
ACCORDANCE WITH THIS REGULATION**
CARTONING INCLUDED
AS/BMC UPDATED 10/8/14
GLOBAL DESIGN
Patio
GLOBAL DESIGN
Specification
ITEM: OUTDOOR-SLING DINING CHAIR
DIMENSIONS: W: 25.5" D: 21.5" H: 40"
SH: 20.5" SD: 21.5" SH: 28.5"
TYPE: NESTING
METAL: TUBULAR, MIN. 18 GAUGE, .063 EXTRUDED TRIPLE HOLLOW
ALUMINUM TUBING
FINISH: POWDER COAT-STORM GREY
WARRANTY: 10 YEARS
FABRIC: GRAPHITE SLING FABRIC
COLOR: STORM GREY
CARTONING INCLUDED
AS/BMC/HR UPDATED 1/20/17
GLOBAL DESIGN
Specification
ITEM: OUTDOOR TABLE FOR POOL WITH HOLE
DIMENSIONS: 28" H X 42" DIAMETER ROUND
MATERIAL: FRAME: ALUMINUM; TUBULAR, ROUND
METAL MIN. 18 GAUGE 1" DIAMETER X .080 THICK ALUMINUM TUBING
FINISH: STORM GREY
PATTERN: BOARDWALK
DETAIL CONSTRUCTION: FULLY WELDED ALUMINUM FRAME WITH A
STORM GREY POWDER COATED FINISH. TABLE TOP IS MADE FROM
1/4" ALUMINUM WITH BOARDWALK PATTERN. THE TABLE TOP HAS A
HOLE FOR UMBRELLA.
WARRANTY ON FRAME: 10 YEARS
CARTONING INCLUDED
AS/BMC UPDATED 12/27/16
GLOBAL DESIGN
Specification
ITEM: OUTDOOR POOL UMBRELLA-9' SQ FRAMES MARKET UMBRELLA
W/ ALUMINUM POLE
DIMENSIONS: 9' SQUARE
CANOPY: 7.5 DIAMETER
FRAME: BLACK FIBERGLASS
POLE: STORM GREY POWDER COATED ALUMINUM
FABRIC: #4615 SMOKE FABRIC
5 YEAR WARRANTY ON FRAME AND FABRIC
COO: FRAME-CHINA COVER-USA
4 WEEKS LEAD TIME
TO BE USED WITH UMBRELLA BASE: 85PTD-C (MI#258687)
CARTONING INCLUDED
AS/BMC
GLOBAL DESIGN
Specification
ITEM: UMBRELLA BASE
CATALOG #: 85PTD-C
DIMENSIONS: 20" WIDTH
MATERIAL: MIN. 18 GAUGE
FINISH: POWDER COATED-STORM GREY
WARRANTY: 12 YEARS
PRE-FILLED WITH CONCRETE.
UMBRELLA BASE IS AN ALUMINUM SHELL POWDER COATED AND
FILLED WITH REDI-MIX CONCRETE. TOTAL WEIGHT SHOULD BE 80-85
LBS WHEN FILLED.
SHIPPED COMPLETE W/CONCRETE-SHIPPING WEIGHT 85 LBS.
CARTONING INCLUDED
AS/BMC/HR UPDATED 1/20/17
GLOBAL DESIGN
Specification
ITEM: OUTDOOR COCKTAIL TABLE
DIMENSIONS: 18" H X 18" DIA
METAL: MIN. 18 GAUGE, 1" DIA X .080 THICK ALUMINUM TUBING
FINISH: STORM GREY
TOP: BOARDWALK
MANUFACTURING CONSTRUCTION DETAILS: FULLY WELDED
ALUMINUM FRAME WITH A STORM GREY POWDERCOATED FINISH.
TABLE TOP IS MADE FROM ALUMINUM. TABLE DOES NOT HAVE A
HOLE FOR AN UMBRELLA.
WARRANTY: 10 YEARS ON FRAME
CARTONING INCLUDED
AS/BMC UPDATED 10/30/15
GLOBAL DESIGN
GLOBAL DESIGN
Specification
MODEL T2 CONVERTIBLE
MODEL #: DT26FEV
DIMENSIONS: FROM 18-30" W X 72" L
HEIGHT TO UNDERSIDE OF TABLE: 28 1/8"
ROMAN III LEGS
TABLE TOP LAMINATE: WILSONART, PATTERN - CAFELLE-7933-60
LEG FINISH: MATTE BLACK POWDERCOAT
NOTE: USED IN FAIRFIELD INN BRANDS
FA/FA
GLOBAL DESIGN
Specification
ITEM: INFLEX CHAIR ARMLESS WITH CASTERS
MODEL: 974 FC8 AO US FG1 C13 AC
DIMENSIONS: 20"W x 22"D x 33"H
ENTIRE PIECE MUST MEET: CA117
CONSTRUCTION DETAILS: METAL FRAME WITH SLATE POWDER
COAT PAINT FINISH. MOLDED POLYPROPYLENE
SEAT FRAME: METAL FRAME SLATE FINISH
SEAT: UPHOLSTERED IN GRADE 1 HIGHLAND COTTAGE 100%
POLYVINYL
SEAT FOAM: FABRICATED POLYURETHANE
CASTERS: 50MM BLACK DUAL WHEEL
PRIMARY UPHOLSTERY: (PROVIDED BY SUPPLIER)
SEAT
MFR: SITONIT
PATTERN: HIGHLAND
COLOR: COTTAGE
WARRANTY: CHAIR: LIFETIME; FABRIC/FOAM: 5 YEAR
ANSI/BIFMA: MEETS OR EXCEEDS ANSI/BIFMAX5.1-2002
OTHER: GREENGUARD CERTIFIED
PACKAGING: CHAIRS SHIP FULLY ASSEMBLED ONE PER CARTON
BV/CK 1/10/17
GLOBAL DESIGN
Specification
ITEM: LARGE GLASS WRITING SURFACE PANEL WITH ALUMINUM PEN
RAIL
CATALOG #: GBFC7248-GLASS DRY ERASE WRITING PANEL
OVERALL DIMENSIONS: W: 72" H: 48" D: 2 1/4"
OTHER: SLIGHTLY GREEN, LAMINATED, 2-PLY TEMPERED GLASS
SURFACE, LOW LEAD / LOW IRON CONTENT; EACH OF THE 2-PLY
PANELS HAS WHITE BACKER AND FLAT POLISHED EDGES
INCLUDES: ERASER AND 4 MARKER PENS, FULL WIDTH ALUMINUM
(NATURAL ANODIZED FINISH) PEN RAIL 2.25" DEEP (PEN RAIL SHIPS
SEPARATELY FOR SELF-BOND FIELD INSTALL AT BOTTOM EDGE
INSTALLATION NOTE: SPECIAL COMPONENTS FOR FLOATING
APPEARANCE; 2 WHITE STICKS TO CLOSE SPACE BETWEEN CLEATS;
2 STEEL MOUNTING BRACKETS GLUE BONDED TO BACK PANEL; 2
WHITE WOOD WALL ATTACHMENT CLEATS; TOP CLEAT HAS 2 HOLES
TO SECURE TO TOP BRACKET ON PANEL BACK.
WEIGHT/CUBE: 121 LBS
CARTONING INCLUDED IN COST
GC/RMB
GLOBAL DESIGN
Specification
ITEM: WALL MOUNTING BRACKET
DESCRIPTION: TV WALL MOUNT FOR LED AND LCD TV'S 37" TO 75"
MODEL: SF650 - FLAT MOUNT
COLOR: BLACK
UNIVERSAL BRACKETS
DIMENSIONS: 30.87"W X 16.89"H X 1.25"D
BV/CK
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: 65" LED FLAT PANEL HD PRO-CENTRIC, PRO: IDIOM WITH
INTEGRATED B-LAN
COLOR: BLACK
SCREEN SIZE: 64.53" DIAGONAL
DIMENSIONS:
WITH STAND: W: 57.5" H: 35.4" D: 11.6"
WITHOUT: W: 57.5" H: 33.4" D: 2.3"
BASE: STATIONARY BASE
BRIGHTNESS: 228 CD/M2
RESOLUTION: 1920 X 1080
CONTRAST RATIO: 1,400: 1
FRAME RATE: 240HZ
300MM X 300MM VESA
TRIPLE XD ENGINE
ASPECT RATIO: 5 MODES
USB CLONING
ENERGY STAR 7.0
SPEAKERS: BUILT IN, 10 WATTS EACH, 20 TOTAL
REMOTE INCLUDED
WARRANTY: PARTS AND LABOR: 3 YRS
CARTONING INCLUDED
BV/CK 8/24/15
GLOBAL DESIGN
Corridor
GLOBAL DESIGN
Specification
ITEM: TUFTED CORRIDOR RUNNER
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X753D
COLOR NUMBER(S): X753D
CUSTOM: YES
WIDTH: 15'
PATTERN REPEAT: V: 90" H: 115"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.239"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 36 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- U PATTERN
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
GLOBAL DESIGN
Specification
ITEM: CARPET - CORRIDOR RUNNER
CONSTRUCTION: WOVEN AXMINSTER
PATTERN NUMBER: FX11988-32
JOB#: 161505
COLOR NUMBER(S): 8 COLORS: 1=33E, 2=34E, 3=K324/18J,
4=E313/34D, 5=E310/31D, 6=E312/33D, 7=E316, 8=M300
CUSTOM DESIGN/COLOR: YES - STRIKE OFF #: FX11988-32
WIDTH: 12' W
PATTERN REPEAT: V: 125.4" H: 72"
ROWS: 7 ROW
FINISHED PILE HEIGHT: .250"
YARN PLY: 2/52 DEWSBURY
YARN COMPOSITION: 100% NYLON TYPE 6.6
DYE TECHNIQUE: SKEIN
FINISHED FACE WEIGHT: 25.4 OZ/SY
TOTAL FINISHED WEIGHT: 54.7 OZ/SY
TOTAL THICKNESS: 0.355"
BACKING: 100% SYNTHETIC POLYESTER AND POLYPROPYLENE
YARN DENIER: N/A
YARN DENSITY: N/A
ALL CARPET MUST MEET:
COLOR FASTNESS: 4-5
LIGHT FASTNESS: 4-5
FLAMMABILITY: CLASS 1 ASTM E-648
TUFT BIND: N/A
SOIL/STAIN TREATMENTS: YES
OTHER TOPICAL TREATMENTS:
WEAR WARRANTY: 10 YEAR LIMITED WEAR WARRANTY
OTHER WARRANTIES:
COO:
QUANTITY MUST BE VERIFIED BY INSTALLER
GC/CK 1/12/17
GLOBAL DESIGN
Specification
CARPET STEWARDSHIP ASSESSMENT
GLOBAL DESIGN
Specification
ITEM: ELEVATOR LOBBY/TRANSITION/DOORDROP/FILL CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X075H
COLOR NUMBER(S): X075H
CUSTOM: YES
WIDTH: 13'
PATTERN REPEAT: V: 52" H: 35.2"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.239"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 36 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- U PATTERN
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
GLOBAL DESIGN
Specification
ITEM: CARPET - ELEVATOR LOBBY/TRANSITION
CONSTRUCTION: WOVEN AXMINSTER
PATTERN NUMBER: FX12471-3
JOB#: 161505
COLOR NUMBER(S): 4 COLORS: 1=33E, 2=34E, 3=K324/18J, 4=E316
CUSTOM DESIGN/COLOR: YES - STRIKE OFF #: FX12471-3
WIDTH: 12' W
PATTERN REPEAT: V: 62.71" H: 48"
ROWS: 7 ROW
FINISHED PILE HEIGHT: .250"
YARN PLY: 2/52 DEWSBURY
YARN COMPOSITION: 100% NYLON TYPE 6.6
DYE TECHNIQUE: SKEIN
FINISHED FACE WEIGHT: 25.4 OZ/SY
TOTAL FINISHED WEIGHT: 54.7 OZ/SY
TOTAL THICKNESS: 0.355"
BACKING: 100% SYNTHETIC POLYESTER AND POLYPROPYLENE
YARN DENIER: N/A
YARN DENSITY: N/A
ALL CARPET MUST MEET:
COLOR FASTNESS: 4-5
LIGHT FASTNESS: 4-5
FLAMMABILITY: CLASS 1 ASTM E-648
TUFT BIND: N/A
SOIL/STAIN TREATMENTS: YES
OTHER TOPICAL TREATMENTS:
WEAR WARRANTY: 10 YEAR LIMITED WEAR WARRANTY
OTHER WARRANTIES:
COO:
QUANTITY MUST BE VERIFIED BY INSTALLER
GC/CK 1/12/17
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR PUBLIC SPACE CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X209C
COLOR #: X209C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X209C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Public Space - Carpet MR-002B
Public Space Alternate - Options Options OA-001BOPT
Corridor - Corridor Carpet PG-002BALT1
Corridor - Corridor Carpet PG-002BALT3
Corridor Alternate - Corridor Options Corridor PG-007BOPT
Options
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR PUBLIC SPACE CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X209C
COLOR #: X209C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X209C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Public Space - Carpet MR-002B
Public Space Alternate - Options Options OA-001BOPT
Corridor - Corridor Carpet PG-002BALT1
Corridor - Corridor Carpet PG-002BALT3
Corridor Alternate - Corridor Options Corridor PG-007BOPT
Options
GLOBAL DESIGN
Specification
ITEM: PADDING FOR GLUE-DOWN INSTALLATION
AREA: GUESTROOM/LOBBY/MEETING ROOM/CORRIDOR/ADMIN
OFFICE/EXERCISE ROOM(EXCEPT WHEN USING RUBBER FLOORING)
STYLE: TREDMOR-2568QL
OUNCE WEIGHT: 68 OZ
COLOR: BLACK
DENSITY: 22 LBS.
THICHKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
ROLL SIZE: 54"W X 60'L = 30 SY
SHIPPING WEIGHT: 138 LBS
PILL TEST: PASS
MOISTURE RESISTANCE: 98%
COMPRESSION LOAD DEFLEC: 8 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
BACKING: QUICK LIFT
TOP: POLYTEC
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED-LIFE OF CARPET
NOTE: MUST BE ORDERED IN 30 SQUARE YARD INCREMENTS
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATED 05.29.12) Room Types Where This Is Used
Public Space - Carpet LM-003
Public Space - Carpet MR-003
Corridor - Corridor Carpet PG-003ALT1
Corridor - Corridor Carpet PG-003ALT2
Corridor - Corridor Carpet PG-003ALT3
GLOBAL DESIGN
Specification
ITEM: PADDING FOR GLUE-DOWN INSTALLATION
AREA: GUESTROOM/LOBBY/MEETING ROOM/CORRIDOR/ADMIN
OFFICE/EXERCISE ROOM(EXCEPT WHEN USING RUBBER FLOORING)
STYLE: TREDMOR-2568QL
OUNCE WEIGHT: 68 OZ
COLOR: BLACK
DENSITY: 22 LBS.
THICHKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
ROLL SIZE: 54"W X 60'L = 30 SY
SHIPPING WEIGHT: 138 LBS
PILL TEST: PASS
MOISTURE RESISTANCE: 98%
COMPRESSION LOAD DEFLEC: 8 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
BACKING: QUICK LIFT
TOP: POLYTEC
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED-LIFE OF CARPET
NOTE: MUST BE ORDERED IN 30 SQUARE YARD INCREMENTS
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATED 05.29.12) Room Types Where This Is Used
Public Space - Carpet LM-003
Public Space - Carpet MR-003
Corridor - Corridor Carpet PG-003ALT1
Corridor - Corridor Carpet PG-003ALT2
Corridor - Corridor Carpet PG-003ALT3
GLOBAL DESIGN
Specification
ITEM: PADDING FOR GLUE-DOWN INSTALLATION
AREA: GUESTROOM/LOBBY/MEETING ROOM/CORRIDOR/ADMIN
OFFICE/EXERCISE ROOM(EXCEPT WHEN USING RUBBER FLOORING)
STYLE: TREDMOR-2568QL
OUNCE WEIGHT: 68 OZ
COLOR: BLACK
DENSITY: 22 LBS.
THICHKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
ROLL SIZE: 54"W X 60'L = 30 SY
SHIPPING WEIGHT: 138 LBS
PILL TEST: PASS
MOISTURE RESISTANCE: 98%
COMPRESSION LOAD DEFLEC: 8 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
BACKING: QUICK LIFT
TOP: POLYTEC
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED-LIFE OF CARPET
NOTE: MUST BE ORDERED IN 30 SQUARE YARD INCREMENTS
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATED 05.29.12) Room Types Where This Is Used
Public Space - Carpet LM-003
Public Space - Carpet MR-003
Corridor - Corridor Carpet PG-003ALT1
Corridor - Corridor Carpet PG-003ALT2
Corridor - Corridor Carpet PG-003ALT3
GLOBAL DESIGN
Specification
ITEM: ELEVATOR LOBBY/TRANSITION/DOORDROP/FILL CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X075H
COLOR NUMBER(S): X075H
CUSTOM: YES
WIDTH: 13'
PATTERN REPEAT: V: 52" H: 35.2"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.239"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 36 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- U PATTERN
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
GLOBAL DESIGN
Specification
ITEM: CARPET - CORRIDOR DOOR FILL
CONSTRUCTION: WOVEN AXMINSTER
PATTERN NUMBER: BX06097-5
JOB#: 161505
COLOR NUMBER(S): 3 COLORS: 1=33E, 2=34E, 3=K324/18J
CUSTOM DESIGN/COLOR: YES - STRIKE OFF #: BX06097-5
WIDTH: 12' W
PATTERN REPEAT: H: 72" V: 72"
ROWS: 7 ROW
FINISHED PILE HEIGHT: .250"
YARN PLY: 2/52 DEWSBURY
YARN COMPOSITION: 100% NYLON TYPE 6.6
DYE TECHNIQUE: SKEIN
FINISHED FACE WEIGHT: 25.4 OZ/SY
TOTAL FINISHED WEIGHT: 54.7 OZ/SY
TOTAL THICKNESS: 0.355"
BACKING: 100% SYNTHETIC POLYESTER AND POLYPROPYLENE
YARN DENIER: N/A
YARN DENSITY: N/A
ALL CARPET MUST MEET:
COLOR FASTNESS: 4-5
LIGHT FASTNESS: 4-5
FLAMMABILITY: CLASS 1 ASTM E-648
TUFT BIND: N/A
SOIL/STAIN TREATMENTS: YES
OTHER TOPICAL TREATMENTS:
WEAR WARRANTY: 10 YEAR LIMITED WEAR WARRANTY
OTHER WARRANTIES:
COO:
QUANTITY MUST BE VERIFIED BY INSTALLER
GC/CK 1/12/17
GLOBAL DESIGN
Specification
ITEM: ELEVATOR LOBBY/TRANSITION/DOORDROP/FILL CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X075H
COLOR NUMBER(S): X075H
CUSTOM: YES
WIDTH: 13'
PATTERN REPEAT: V: 52" H: 35.2"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.239"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 36 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- U PATTERN
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR PUBLIC SPACE CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X209C
COLOR #: X209C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X209C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Public Space - Carpet MR-002B
Public Space Alternate - Options Options OA-001BOPT
Corridor - Corridor Carpet PG-002BALT1
Corridor - Corridor Carpet PG-002BALT3
Corridor Alternate - Corridor Options Corridor PG-007BOPT
Options
GLOBAL DESIGN
Specification
ITEM: BOH/STAIRS CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X965B
COLOR NUMBER(S): X965B
CUSTOM: YES
WIDTH: 12'
PATTERN REPEAT: V: 36" H: 48"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.246"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 36 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- U PATTERN
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
ITEM: FABRIC SHEER
PATTERN: ALISON
COLOR: SLATE
DRAPERY FABRIC ORIENTATION: RAILROADED
WIDTH: 117"
REPEAT: H: 0" V: 0"
CONTENT: 100% POLYESTER
MEETS: NFPA 701
CLEANING CODE: (S) SOLVENT FREE CLEANER
ROLL SIZE: 50 YDS
COO: TURKEY
CARTONING INCLUDED
AS/BMC UPDATED 12/7/16
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: CORRIDOR WALL SCONCE WITH CYLINDER
SHAPED ACRYLIC SHADES ON TOP AND BOTTOM OF CENTRALLY
LOCATED BACK PLATE
OVERALL DIMENSIONS: 28" H X 4.5" W X 4" D
BACKPLATE DIMENSIONS: 9" H X 4.5" W X 5/8" D
CENTRAL SHADE CONNECTION MOUNT: 5 3/8" H X 3" DIA
MATERIAL AND FINISH COLOR: PLATED ANTIQUE BRASS
SWITCH TYPE: HARDWIRED
SOCKET BASE TYPE: (2) INTEGRATED LED PANELS. EACH PANEL IS 8
WATTS, 670 LUMENS (1,340 TOTAL), 3000K COLOR TEMP.
BULB INCLUDED: YES
QUANTITY: 2
MAXIMUM WATTAGE: 16 WATTS
VOLTAGE: 120
SHADES: (2) PROVIDED WITH FIXTURE, SEE BELOW:
SHAPE: CYLINDER
SIZE: (2) AT 2.75" DIA X 11.5" H
MATERIAL AND COLOR: FROSTED WHITE ACRYLIC WITH
DECORATIVE METAL MESH DIFFUSER END CAPS
SHADE ATTACHMENT: EACH SHADE SCREWS INTO CENTRALLY
LOCATED SHADE CONNECTION MOUNT.
LISTING: UL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC/HR UPDATED 1/17/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - CORRIDOR MAIN
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: NO
PATTERN: MAR232
COLOR: SLATE
EMBOSSING: VERTICAL TESSERA
WIDTH: 52"-54"
REPEAT: H: N/A V: N/A
INSTALLATION NOTE: RANDOM REVERSIBLE
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: OSNABURG
FILM BASE COLOR: LIGHT GREY/GREEN
INK TYPE/APPLICATION: WATER-BASED INKS
TOP COAT: CLEAR ACRYLIC TOPCOAT
RECYCLED CONTENT: NONE
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 11/30/16
GLOBAL DESIGN
Guest Room
GLOBAL DESIGN
Specification
ASSESS $5 RECYLING FEE FOR TV'S THAT MEASURE 35" AND
LARGER DIAGONALLY
BV/HR
GLOBAL DESIGN
Specification
ASSESS $4 RECYLING FEE FOR TV'S THAT MEASURE MORE THAN 15"
AND LESS THAN 35" DIAGONALLY
BV/HR
GLOBAL DESIGN
Specification
RECYCLING FEE OF $11.00 THAT IS COLLECTED WHEN A MATTRESS
OR BOXSPRING IS SOLD IN CALIFORNIA. *THIS FEE IS FOR EACH
PIECE.* ADD FEE TO TO VENDOR USED ON ORDER.
NOTE: THIS FEE IS TAXABLE.
AS/BMC
GLOBAL DESIGN
Specification
RECYCLING FEE OF $9.00 THAT IS COLLECTED WHEN A MATTRESS
OR BOXSPRING IS SOLD IN CONNECTICUT. *THIS FEE IS FOR EACH
PIECE.* ADD FEE TO TO VENDOR USED ON ORDER.
NOTE: THIS FEE IS TAXABLE.
AS/HR
GLOBAL DESIGN
Specification
RECYCLING FEE OF $10.00 THAT IS COLLECTED WHEN A MATTRESS
OR BOXSPRING IS SOLD IN RHODE ISLAND. *THIS FEE IS FOR EACH
PIECE.* ADD FEE TO TO VENDOR USED ON ORDER.
NOTE: THIS FEE IS TAXABLE.
AS/BMC
GLOBAL DESIGN
Specification
ITEM: ACCENT NIGHTSTAND WITH QUARTZ TOP
DIM: 17"DIA X 22 1/2"H
BASE: SHAPED BASE OF FOUR LAYERS OF FIBERGLASS WITH 17"
TOP DIA, 14" BOTTOM DIA WITH ANGLED SHAPE AT CENTER,
FIBERGLASS HAS THRU BODY GRAY COLOR RESIN; TOP OF BASE
INCLUDES 3/8" PLYWOOD ENCASED WITHIN FIBERGLASS FOR
STRUCTURE, WILL SUPPORT UP TO 250 LBS.
BASE FINISH: BLACK MATT POWDERCOAT # BK-121 WITH
POLYURETHANE K2 PROTECTIVE TOP COAT
GLIDES: 3 EACH ADJUSTABLE GLIDES AT BOTTOM OF BASE
TOP: 17" DIA QUARTZ TOP, QC-6172
PACKING: BASES ARE INDIVIDUALLY CARTONED, QUARTZ TOPS ARE
BULK CRATED
ASSEMBLY: TOPS TO BE ATTACHED IN THE FIELD USING SILICONE
INCLUDED, REFER TO ASSEMBLY INSTRUCTIONS FOR PROPER
APPLICATION OF SILICONE TO ADHERE QUARTZ TOP TO BASE
NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD PRODUCTS
MUST COMPLY WITH CALIFORNIA CODE OF REGULATIONS 93120.
PRODUCT AND CARTONS WILL BE LABELED IN ACCORDANCE WITH
THIS REGULATION.
LM/CK 12/30/16
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: KING HEADBOARD WITH TWO EACH 25" SIDE PANELS
OVERALL DIM: 124"W X 3"D X 68"H
HEADBOARD - 74"W
SIDE PANELS - TWO EACH 25"W WITH REMOVABLE ACCESS PANEL
FOR ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING, HORIZONTAL ON TOP OF
HEADBOARD, SIDE PANELS AND PANEL BEHIND MATTRESS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
SIDE PANELS: CAN BE SET UP FOR LEFT OR RIGHT HAND ROOM, ONE
SIDE PANEL W/CANTILEVER NIGHTSTAND AND ONE USED WITH
FREESTANDING NIGHTSTAND
ORIENTATION: CANTILEVER NIGHTSTAND TO BE POSITIONED
CLOSEST TO WINDOW
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 2) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 16/16" X 1 1/4" HOLE IN SIDE PANEL FOR COM NIGHTSTAND
SCONCE
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS
USED WITH 2 EACH 19" NIGHTSTANDS, K-201CN
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/23/17
Room Types Where This Is Used
Guestrooms - King Accessible Left K-201
Guestrooms - King Accessible Right K-201
Guestrooms - King Left K-201
Guestrooms - King Right K-201
Guestrooms - King Suite Accessible Left K-201
Guestrooms - King Suite Accessible Right K-201
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: 19" CANTILEVER NIGHTSTAND FOR TYPICAL KING
OVERALL DIM: 19"W X 14 1/2"D X 8"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
LAMINATE: HIGH PRESSURE LAMINATE-ANSONART 8846NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO (US)
FRONT EDGE: PVC EDGE BAND 1ML PVC TO MATCH OILED LEGNO
DRAWER: ONE WITH FULL EXTENSION SIDE GUIDES
DRAWER INTERIOR: STAINED TO MATCH EXTERIOR OF CABINET
DRAWER PULL: RECTANGULAR CUTOUT 8 5/16"W X 1 1/2"H
CENTERED AT TOP OF DRAWER
CUTOUT AT FOR MOUSEHOLE AT TOP 2 1/4"W X 1/4"D
ASSEMBLY: ATTACHES TO WALL MOUNTED NIGHSTAND PANEL
USING METAL SUPPORT BRACKETS, HARDWARE TO ATTACH
NIGHTSTAND TO PANEL INCLUDED
*NOTE: USED WITH WALL MOUNTED NIGHTSTAND PANELS IN ALL
ROOM TYPES
**NOTE: SEALED FOR MOISTURE RESISTANCE
***NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
LM/CK/HR UPDATED 1/19/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
MATERIAL CLASS: MATTRESS INNERSPRING
TYPE: SERTA PERFECT SLEEPER CORPORATE SUITE II PLUSH - ONE
SIDED NON FLIP
SIZE: HOTEL KING
DIMENSIONS: 72" W X 80" L X 12.25" H
PRIMARY INSULATION: FIRE BLOCKER INSULATOR PAD
INNERSPRING: CONTINUOUS WIRE UNIT - 9 GAUGE BORDER WIRE.
POSTURIZED CENTER THIRD. STEEL REINFORCED EDGES. HEAD TO
TOE HELICALS COOL TWIST GEL MEMORY FOAM.
UPHOLSTERY: 2" POLY FOAM, HEAVY DUTY SYNTHETIC FIBER PAD
QUILT CONSTRUCTION PANEL: FIREBLOCKER; 1 1/2" SERTA
PILLOWSOFT FOAM.
PANEL TICK: NANOTEX TICK (#73029)
BORDER TICK: NANOTEX TICK (#73029)
COIL COUNT: FOAM ENCASED CONTINUOUS WIRE SPRING UNIT 960
COIL COUNT DENSITY
STAIN REPELLENT & FABRIC UPGRADE AVAILABLE FOR AN
UPCHARGE
WARRANTY: NON-PRORATED 10 YEAR WARRANTY
WARRANTY: 10 YEARS NON PRORATED. COVERS MATTRESS THAT IS
USED WITH ANOTHER MANUFACTURERS BOXSPRING OR SUITABLY
CONSTRUCTED PLATFORM.
NORMAL DELIVERY: 10 WORKING DAYS
COMPLIANCE WITH SPECIFIC FLAMMABILITY CODES: 16 C FR USA:
FREIGHT: FREE FREIGHT WITHIN THE CONTINENTAL US
ADDITIONAL CHARGE: A $75 STOP CHARGE FEE WILL BE ADDED TO
ORDERS OF LESS THAN 12 SETS WITHIN 250 KM OF FACTORY.
CANADIAN FREIGHT: FREE FREIGHT WITH MINIMUM ORDER OF 12
SETS(24 PIECES) OR MORE, WITHIN 250 KM OF THE NEAREST SERTA
PLANT. FOR ORDERS THAT ARE LESS THAN 12 SETS(24 PIECES),
WITHIN 250 KM OF THE NEAREST SERTA PLANT, A $75 STOP CHARGE
FEE WILL BE ADDED. ANY DELIVERIES THAT ARE OUTSIDE THE 250
KM RADUIS WOULD REQUIRE A FREIGHT QUOTE.
CANADIAN FACTORIES: MONTREAL, TORONTO, VANCOUVER,
WINNIPEG.
CANADA: COMPLIANCE W/ SPECIFIC COUNTRY'S FLAMMABILITY
CODES.
AS/BMC UPDATED 7/9/15
Room Types Where This Is Used
Guestrooms - King Accessible Left K-210M1
Guestrooms - King Accessible Right K-210M1
Guestrooms - King Left K-210M1
Guestrooms - King Right K-210M1
Guestrooms - King Suite Accessible Left K-210M1
Guestrooms - King Suite Accessible Right K-210M1
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: SIMMONS BEAUTYREST WORLD CLASS PLUSH MATTRESS-
HYDE PARK RECHARGE
SIZE: KING
DIMENSIONS: 72"W X 80"L X 12"H
PRIMARY INSULATION: 1/2" BLOC FOAM (COIL SUPPORT)
UPHOLSTERY: 1.5" TRANSFLEXION FOAM
QUILT CONSTRUCTION:
1ST LAYER: 1.2 OZ FR FIBER
2ND LAYER: 1" AIR COOL FOAM
1" WAVE CONVOLUTED FOAM
EDGE SUPPORT: 3" FOAM RAILS FEATURING DIAMOND VENTILATION
FOR ENHANCED AIRFLOW.
BORDER FILL: 1.0 OZ FR FIBER
SOIL/STAIN FINISH: NANO-TEX PERMANENT SPILL & STAIN
PROTECTION
PANEL TICK: TACK AND JUMP
COIL COUNT: 1288 DENSITY
COIL GAUGE: 15.5
WARRANTY: 10/10 NON-PRORATED
FREIGHT: MINIMUM ORDER OF 10 SETS, LESS THAN 10 SETS WILL
INCUR A ONE-TIME $50.00 STOP CHARGE.
CANADIAN FREIGHT TERMS: FOB POINTS ARE MONTREAL,
TORONTO,VANCOUVER, AND CALGARY. FREIGHT IS INCLUDED FOR
ORDER DELIVERING WITHIN THE CITY LIMITS OF THESE 4 PLANTS.
FOR ALL OTHER OTHERS, CALL FOR FREIGHT QUOTE.
NOTE: PRICING FOR MEXICO, PUERTO RICO, AND HAWAII WILL VARY
AND NEEDS TO BE CONFIRMED WITH SUPPLIER
NOTE: Room Types Where This Is Used
- 15" POCKET FITTED SHEET REQUIRED Guestrooms - King Accessible Left K-210M2
- COORDINATE WITH SHEET PURCHASE FOR NEW BUILD HOTELS
- FOR RENOVATIONS, A MODEL ROOM REVIEW IS RECOMMENDED TO Guestrooms - King Accessible Right K-210M2
CONFIRM THE HOTEL'S EXISTING INVENTORY OF SHEETS WILL FIT Guestrooms - King Left K-210M2
- NEW FITTED BOTTOM SHEETS MAY BE REQUIRED
CARTONING INCLUDED Guestrooms - King Right K-210M2
AS/BMC UPDATED 7/8/15 Guestrooms - King Suite Accessible Left K-210M2
Guestrooms - King Suite Accessible Right K-210M2
Guestrooms - King Suite Left K-210M2
Guestrooms - King Suite Right K-210M2
GLOBAL DESIGN
Specification
**ALL PRICING INCLUDED DELIVERY (SEE DELIVERY MAP)50 SETS/100
PIECES TO THE WEST COAST OR 25 SETS/50 PIECES TO THE EAST
COAST.
ITEM: KING 12" MATTRESS - FOAM, PRESIDENTIAL
SIZE: KING
DIMENSIONS: W: 72" L: 80" HT: 12"
WEIGHT/CUBE: QN: 62 LBS
TOP PANEL: MULTI-QUILTED, SAFE SLUMBER FR WITH 1" GEL
INFUSED SS FOAM + 1" SS FOAM.
COLOR: SILVER/GREY/WHITE BLACKGROUND
SOIL/STAIN FINISH: ALTA SPILL & STAIN PROTECTION
TICKING: SILVER/GREY DAMASK. BORDERS WILL BE MULTI-QUILTED
TO SAFE SLUMBER FR.
NOTE: 10" LAMINATED HIGH DENISTY POLYURETHANE CORE
CONSISTING OF A 7" FIRM BASE CORE LAMINATED 3" TOP LAYER.
SAFE SLUMBER 16CFR 1633 COMPLIANT SURROUND BARRIER.
LAMINATED CORE COMPRISED OF:
7" 1.8 DENSITY 28 LB. IFD MIDDLE BASE LAYER
3" 1.8 DENSITY 20 LB. IFD TOP LAYER
DENSITY : 1.75- 1.85
* ALL CORES PRE-CRUSHED PRIOR TO SPECIFICATION RATINGS.
WARRANTY: 10 YEARS FULL
FLAMMABILITY RATING: 16 CFR 1633 SAFE SLUMBER COMPLIANT
SURROUND BARRIER ACROSS TOP, BOTTOM AND SIDES OF
MATTRESS AND SEWN WITH KEVLAR THREAD.
**NOTE: THIS MATTRESS IS SPECIFICALLY DESIGNED FOR USE WITH
PLATFORM BEDS, RIGID FOUNDATIONS, WORKING BOX SPRINGS
AND ADJUSTABLE BED BASES. EITHER A SOLID FLAT SURFACE OR A Room Types Where This Is Used
SLATED SURFACE IS ACCEPTABLE(SLAT NO MORE THAN 4" APART) Guestrooms - King Accessible Left K-210M3ALTA
FOR A PLATFORM BED. THE ENTIRE OUTSIDE MATTRESS PERIMETER
SHOULD BE SUPPORTED. Guestrooms - King Accessible Left K-210M3ALTB
FOB- JAMISON PLANT GALLATIN, TN Guestrooms - King Accessible Right K-210M3ALTA
CARTONING INCLUDED ON SMALLER ORDERS, NOT ON TRUCKLOAD
QUANTITIES. Guestrooms - King Left K-210M3ALTA
AS/BMC/HR UPDATED 9/1/16 Guestrooms - King Right K-210M3ALTA
Guestrooms - King Suite Accessible Left K-210M3ALTA
Guestrooms - King Suite Accessible Right K-210M3ALTA
Guestrooms - King Suite Left K-210M3ALTA
Guestrooms - King Suite Right K-210M3ALTA
Guestrooms - King Accessible Right K-210M3ALTB
Guestrooms - King Left K-210M3ALTB
Guestrooms - King Right K-210M3ALTB
Guestrooms - King Suite Accessible Left K-210M3ALTB
Guestrooms - King Suite Accessible Right K-210M3ALTB
GLOBAL DESIGN
GLOBAL DESIGN
Specification
**ALL PRICING INCLUDED DELIVERY (SEE DELIVERY MAP)50 SETS/100
PIECES TO THE WEST COAST OR 25 SETS/50 PIECES TO THE EAST
COAST.
ITEM: KING 12" MATTRESS - FOAM, PRESIDENTIAL
SIZE: KING
DIMENSIONS: W: 72" L: 80" HT: 12"
WEIGHT/CUBE: QN: 62 LBS
TOP PANEL: MULTI-QUILTED, SAFE SLUMBER FR WITH 1" GEL
INFUSED SS FOAM + 1" SS FOAM.
COLOR: SILVER/GREY/WHITE BLACKGROUND
SOIL/STAIN FINISH: ALTA SPILL & STAIN PROTECTION
TICKING: SILVER/GREY DAMASK. BORDERS WILL BE MULTI-QUILTED
TO SAFE SLUMBER FR.
NOTE: 10" LAMINATED HIGH DENISTY POLYURETHANE CORE
CONSISTING OF A 7" FIRM BASE CORE LAMINATED 3" TOP LAYER.
SAFE SLUMBER 16CFR 1633 COMPLIANT SURROUND BARRIER.
LAMINATED CORE COMPRISED OF:
7" 1.8 DENSITY 28 LB. IFD MIDDLE BASE LAYER
3" 1.8 DENSITY 20 LB. IFD TOP LAYER
DENSITY : 1.75- 1.85
* ALL CORES PRE-CRUSHED PRIOR TO SPECIFICATION RATINGS.
WARRANTY: 10 YEARS FULL
FLAMMABILITY RATING: 16 CFR 1633 SAFE SLUMBER COMPLIANT
SURROUND BARRIER ACROSS TOP, BOTTOM AND SIDES OF
MATTRESS AND SEWN WITH KEVLAR THREAD.
**NOTE: THIS MATTRESS IS SPECIFICALLY DESIGNED FOR USE WITH
PLATFORM BEDS, RIGID FOUNDATIONS, WORKING BOX SPRINGS
AND ADJUSTABLE BED BASES. EITHER A SOLID FLAT SURFACE OR A Room Types Where This Is Used
SLATED SURFACE IS ACCEPTABLE(SLAT NO MORE THAN 4" APART) Guestrooms - King Accessible Left K-210M3ALTA
FOR A PLATFORM BED. THE ENTIRE OUTSIDE MATTRESS PERIMETER
SHOULD BE SUPPORTED. Guestrooms - King Accessible Left K-210M3ALTB
FOB- JAMISON PLANT GALLATIN, TN Guestrooms - King Accessible Right K-210M3ALTA
CARTONING INCLUDED ON SMALLER ORDERS, NOT ON TRUCKLOAD
QUANTITIES. Guestrooms - King Left K-210M3ALTA
AS/BMC/HR UPDATED 9/1/16 Guestrooms - King Right K-210M3ALTA
Guestrooms - King Suite Accessible Left K-210M3ALTA
Guestrooms - King Suite Accessible Right K-210M3ALTA
Guestrooms - King Suite Left K-210M3ALTA
Guestrooms - King Suite Right K-210M3ALTA
Guestrooms - King Accessible Right K-210M3ALTB
Guestrooms - King Left K-210M3ALTB
Guestrooms - King Right K-210M3ALTB
Guestrooms - King Suite Accessible Left K-210M3ALTB
Guestrooms - King Suite Accessible Right K-210M3ALTB
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: CONTRACT KING- POSTUREPEDIC MATTRESS
TYPE: 13.75 GAUGE, 7 TURN ENCASED INNERSPRING MATTRESS
SIZE: CONTRACT KING
DIMENSIONS: 72" W X 80" L X 12 3/4" H
PRIMARY INSULATION: 2.5" X 7.5" MRV FOAM RAILS, MTB + 4ES + .5"
MARVELUX
UPHOLSTERY: LT FR RAYON FIBER + 8.5" FLG, 1" SS POLY, 1" SS
POLY, MT Z1-PCR-C: 1.5"/1.5"
QUILT CONSTRUCTION: ZONED QUILT PATTERN
PANEL TICK: 3220 CHESTNUT
BORDER TICK: 5734 NATURAL
COIL COUNT: 930
WARRANTY: NON-PRORATED 10 YEAR WARRANTY PLUS THE
PATENTED UNICASED SYSTEM.
WARRANTY COVERS 1.5" BODY IMPRESSION
WARRANTY DOES NOT COVER MATTRESS THAT IS USED WITH
ANOTHER MANUFACTURERS BOXSPRING.
9" HOSPITALITY GRADE FOUNDATIONS ARE STANDARD
7" AND 5 1/2" LOW PROFILE FOUNDATIONS ARE AVAILABLE AT NO
EXTRA CHARGE FOR TAILGATE DELIVERY TO COMMERCIAL LOADING
DOCK DURING STANDARD WORKING HOURS, 8 A.M. - 4 P.M., M-F.
LOADING DOCK MUST ACCOMMODATE 53 FT. TRACTOR-TRAILER.
HANDLING MAY INCUR ADDITIONAL DELIVERY CHARGES.
NORMAL DELIVERY IS 3 WEEKS LEAD TIME.
COMPLIANCE WITH SPECIFIC FLAMMABILITY CODES, SUCH AS
BOSTON IX - II, CAL 129, CAL 603.
HONG KONG OR UK AVAILABLE AT AN UPCHARGE.
PRICES DO NOT INCLUDE APPLICABLE STATE AND LOCAL TAXES. Room Types Where This Is Used
FREIGHT: FREE FREIGHT SHIPPING IN THE CONTINENTAL US WITH Guestrooms - King Accessible Left K-210M4
NO MINIMUMS
TAG: ARTESIA HD Guestrooms - King Accessible Right K-210M4
AS/BMC UPDATED 12/2/15 Guestrooms - King Left K-210M4
Guestrooms - King Right K-210M4
Guestrooms - King Suite Accessible Left K-210M4
Guestrooms - King Suite Accessible Right K-210M4
Guestrooms - King Suite Left K-210M4
Guestrooms - King Suite Right K-210M4
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED - 72" KING - BLACK
OVERALL DIM: 71"W X 79 1/2"L X 12"H
BASE: 10 5/8" H BASE RECESSED 8" ON EACH SIDE AND END
PLATFORM EDGE: 1MM THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPS IN GRID PATTERN
USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/6/17
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED - 72" KING - BLACK - FOR ACCESSIBLE ROOMS
OVERALL DIM: 71"W X 79 1/2"L X 12"H
BASE: 10 5/8"H BASE RECESSED 8" ON EACH SIDE AND 5" AT THE END
CUT OUT AT BASE: ON BOTH LONG SIDES OF PLATFORM BASE, 55
1/2"W X 7"H
PLATFORM EDGE: 1MM THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPS IN GRID PATTERN
USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/CK 3/2/17
GLOBAL DESIGN
Specification
DESCRIPTION: LEFT 38" KING REFRIGERATOR MICROWAVE CLOSET
UNIT - TAMPER RESISTANT
OVERALL DIMENSIONS: 38"W X 34"D X 85"H
MICROWAVE CAVITY: 20 1/2"W X 15 1/2"D X 12 1/2"H
COFFEE MAKER CAVITY: 20 1/2"W X 15 1/2"D X 19 1/2"H
REFRIGERATOR CAVITY: 19"W X 19 3/4"D X 23 3/8"H - FITS
REFRIGERATOR SIZED 18 1/2"W X 19"D X 22 3/8"H
UPPER CAVITY: 20 1/2"W X 15 1/2"D X 11 3/4"H
WOOD SOLIDS: POPLAR
FINISH: MODIFIED POLYURETHANE
STAIN COLOR: TO MATCH ANSONART 48846NT OILED LEGNO,
KIMBALL KH-22084-C
SHEEN LEVEL: 10 +/- 5
LAMINATE ON SHELVES: SURFACES AND FACING EDGES: ANSONART
48846NT OILED LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
(US)
LAMINATE ON KICK BASE: WILSONART 1595-60 BLACK
VENEER: KIMBALL: VICWOOD AMERICAN WALNUT #2C
CROWN: 4" HIGH, VENEER FACED, 7 1/2" RADIUS AT CORNER
SHELVES:
MICROWAVE SHELF: 20 1/2"W X 15 1/2"D X 2 1/2"H
COFFEE MAKER SHELF: 20 1/2"W X 15 1/2"D X 1 9/16"H
UPPER SHELF: 20 1/2"W X 15 1/2"D X 3/4"H
CLOSET SHELF: 16"W X 24"D X 1 1/2"H
CORD ACCESS:
MICROWAVE: 9"W X 6"H REMOVABLE ACCESS PANEL ATTACHED W/
VELCRO AT SIDE
REFRIGERATOR: 12" X 12" CUT OUT AT SIDE
OUTLET SET: FURNLITE FC-739, 6.65"L X 2.21"W X 2.18"D, INCLUDES
TWO TAMPER RESISTANT CONVENIENCE OUTLETS AND TWO 10
WATT 2.1 AMP CHARGING USB PORTS, 10' GROUNDED CORD, UL
LISTED
DOOR: 17 1/2"W X 3/4"D X 77"H
DOOR SWING 120 DEGREES
DOOR PULL: CUSTOM W/ MATTE BLACK FINISH - TENG FENG, DA09-2-
6 BK
GLIDES: 4 ADJUSTABLE LEVELING GLIDES (1 AT EACH CORNER)
BOTTOM PANEL EDGE: 2MM PVC EDGEBANDING - TO MATCH
FORMICA OILED LEGNO, 7 1/2" RADIUS AT CORNER Room Types Where This Is Used
BASE: RECESS: 1.5" / HEIGHT: 4" Guestrooms - King Left K-270L
HARDWARE:
-CLOTHES PEG: JG EDELEN #1878; 1"DIA X 3"L; FINISH - BLACK MATTE Guestrooms - King Suite Left K-270L
POWDERCOAT 049/80350 (OR EQUAL)
-CLOTHES ROD: FENG SHENG EH0160; 1" DIA ROD W/ FLANGES;
POLISHED CHROME FINISH (OR EQUAL)
-IRON HOLDER: ROYAL PACIFIC CORP #10-200 WHITE (OR EQUAL)
-IRONING BOARD HOOK: AMERICAN HOTEL REGISTER D7B1201531
(OR EQUAL)
LIGHT UNDERSHELF: KIMBALL - PILOT-DTF-LED-12, 12" LED UNDER
GLOBAL DESIGN
GLOBAL DESIGN
Specification
DESCRIPTION: RIGHT 38" KING REFRIGERATOR MICROWAVE CLOSET
UNIT - TAMPER RESISTANT
OVERALL DIMENSIONS: 38"W X 34"D X 85"H
MICROWAVE CAVITY: 20 1/2"W X 15 1/2"D X 12 1/2"H
COFFEE MAKER CAVITY: 20 1/2"W X 15 1/2"D X 19 1/2"H
REFRIGERATOR CAVITY: 19"W X 19 3/4"D X 23 3/8"H - FITS
REFRIGERATOR SIZED 18 1/2"W X 19"D X 22 3/8"H
UPPER CAVITY: 20 1/2"W X 15 1/2"D X 11 3/4"H
WOOD SOLIDS: POPLAR
FINISH: MODIFIED POLYURETHANE
STAIN COLOR: TO MATCH ANSONART 48846NT OILED LEGNO,
KIMBALL KH-22084C
SHEEN LEVEL: 10 +/- 5
LAMINATE ON SHELVES: SURFACES AND FACING EDGES: ANSONART
48846NT OILED LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
(US)
LAMINATE ON KICK BASE: WILSONART 1595-60 BLACK
VENEER: KIMBALL: VICWOOD AMERICAN WALNUT #2C
CROWN: 4" HIGH, VENEER FACED, 7 1/2" RADIUS AT CORNER
SHELVES:
MICROWAVE SHELF: 20 1/2"W X 15 1/2"D X 2 1/2"H
COFFEE MAKER SHELF: 20 1/2"W X 15 1/2"D X 1 9/16"H
UPPER SHELF: 20 1/2"W X 15 1/2"D X 3/4"H
CLOSET SHELF: 16"W X 24"D X 1 1/2"H
CORD ACCESS:
MICROWAVE: 9"W X 6"H REMOVABLE ACCESS PANEL ATTACHED
W/VELCRO AT SIDE
REFRIGERATOR: 12" X 12" CUT OUT AT SIDE
OUTLET SET: FURNLITE FC-739, 6.65"L X 2.21"W X 2.18"D, INCLUDES
TWO TAMPER RESISTANT CONVENIENCE OUTLETS AND TWO 10
WATT 2.1 AMP CHARGING USB PORTS, 10' GROUNDED CORD, UL
LISTED
DOOR: 17 1/2"W X 3/4"D X 77"H
DOOR SWING: 120 DEGREES
DOOR PULL: CUSTOM W/MATTE BLACK FINISH - TENG FENG, DA09-2-6
BK
GLIDES: 4 ADJUSTABLE LEVELING GLIDES (1 AT EACH CORNER)
BOTTOM PANEL EDGE: 2MM PVC EDGEBANDING - TO MATCH
FORMICA OILED LEGNO, 7 1/2" RADIUS AT CORNER Room Types Where This Is Used
BASE: RECESS: 1.5" / HEIGHT: 4" Guestrooms - King Right K-270R
HARDWARE:
-CLOTHES PEG: JG EDELEN #1878; 1"DIA X 3"L; FINISH - BLACK MATTE Guestrooms - King Suite Right K-270R
POWDERCOAT 049/80350 (OR EQUAL)
-CLOTHES ROD: FENG SHENG EH0160; 1" DIA ROD W/FLANGES;
POLISHED CHROME FINISH (OR EQUAL)
-IRON HOLDER: ROYAL PACIFIC CORP #10-200 WHITE (OR EQUAL)
-IRONING BOARD HOOK: AMERICAN HOTEL REGISTER D7B1201531
(OR EQUAL)
LIGHT UNDERSHELF: KIMBALL - PILOT-DTF-LED-12, 12" LED UNDER
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: QUEEN/QUEEN HEADBOARDS FOR READING LIGHTS WITH 25"
CENTER PANEL
OVERALL DIM: 161"W X 3"D X 68"H
HEADBOARDS - 68"W
CENTER PANEL - 25"W WITH REMOVABLE ACCESS PANEL FOR
ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING, HORIZONTAL AT TOP OF
HEADBOARD, CENTER PANEL AND PANEL BEHIND MATTRESS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 4) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 13/16" X 1 1/4" HOLE IN CENTER PANEL FOR COM
NIGHTSTAND SCONCE, 1" DIA HOLE ON OUTSIDE WOOD FRAMING 44"
ABOVE BOTTOM OF HEADBOARD FOR COM READING LIGHTS
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS
USED WITH 25" NIGHTSTAND, Q-201CN Room Types Where This Is Used
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms - QQ Left Q-201
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF Guestrooms - QQ Right Q-201
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED Guestrooms - QQ Suite Left Q-201
WITH THIS REGULATION
CARTONING INCLUDED IN COST Guestrooms - QQ Suite Right Q-201
LM/HR UPDATED 3/10/17
GLOBAL DESIGN
Specification
ITEM: QUEEN/QUEEN HEADBOARDS FOR READING LIGHTS WITH 28"
ADA CENTER PANEL
OVERALL DIM: 164"W X 3"D X 68"H
HEADBOARDS - 68"W
CENTER PANEL - 28"W WITH REMOVABLE ACCESS PANEL FOR
ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING, HORIZONTAL ON TOP OF
HEADBOARDS, CENTER PANEL AND PANEL BEHIND HEADBOARD
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 4) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 13/16" X 1 1/4" HOLE IN CENTER PANEL FOR COM
NIGHTSTAND SCONCE, 1" DIA HOLE ON OUTSIDE WOOD FRAMING 44"
ABOVE BOTTOM OF HEADBOARD FOR COM READING LIGHTS
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS
USED WITH 28" NIGHTSTAND, Q-201CNADA Room Types Where This Is Used
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms - QQ Accessible Left Q-201ADA
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF Guestrooms - QQ Suite Left Q-212A
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED Guestrooms - QQ Accessible Right Q-201ADA
WITH THIS REGULATION
CARTONING INCLUDED IN COST Guestrooms - QQ Suite Accessible Left Q-201ADA
LM/HR UPDATED 1/23/17 Guestrooms - QQ Suite Accessible Right Q-201ADA
Guestrooms - QQ Suite Right Q-212A
GLOBAL DESIGN
Specification
ITEM: 25" CANTILEVER NIGHTSTAND FOR TYPICAL DD & QQ
OVERALL DIM: 25"W X 14 1/8"D X 8"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
LAMINATE: HIGH PRESSURE LAMINATE-ANSONART 48846 NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO (US)
FRONT EDGE: 1ML PVC EDGE BAND TO MATCH FORMICA OILED
LEGNO
DRAWER: ONE WITH FULL EXTENSION SIDE GUIDES
DRAWER INTERIOR: STAINED TO MATCH EXTERIOR OF CABINET
DRAWER PULL: RECTANGULAR CUTOUT 8 5/16"W X 1 1/2"H
CENTERED AT TOP OF DRAWER
CUTOUT AT TOP FOR MOUSEHOLE: 2 1/4"W X 1 1/4"D
ASSEMBLY: ATTACHES TO WALL MOUNTED NIGHSTAND PANEL
USING METAL SUPPORT BRACKETS, HARDWARE TO ATTACH
NIGHTSTAND TO PANEL INCLUDED
*NOTE: USED WITH WALL MOUNTED NIGHTSTAND PANELS IN ALL
ROOM TYPES
**NOTE: SEALED FOR MOISTURE RESISTANCE
***NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
LM/CK/HR UPDATED 1/4/17
GLOBAL DESIGN
Specification
ITEM: 28" CANTILEVER NIGHTSTAND FOR ADA DD & QQ
OVERALL DIM: 28"W X 14 1/8"D X 8"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
LAMINATE: HIGH PRESSURE LAMINATE-ANSONART 48846 NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO (US)
FRONT EDGE: 1ML PVC EDGE BAND TO MATCH FORMICA OILED
LEGNO
DRAWER: ONE WITH FULL EXTENSION SIDE GUIDES
DRAWER INTERIOR: STAINED TO MATCH EXTERIOR OF CABINET
DRAWER PULL: RECTANGULAR CUTOUT 8 5/16"W X 1 1/2"H
CENTERED AT TOP OF DRAWER
CUTOUT AT TOP FOR MOUSEHOLE: 2 1/4"W X 1 1/4"D
ASSEMBLY: ATTACHES TO WALL MOUNTED NIGHSTAND PANEL
USING METAL SUPPORT BRACKETS, HARDWARE TO ATTACH
NIGHTSTAND TO PANEL INCLUDED
*NOTE: USED WITH WALL MOUNTED NIGHTSTAND PANELS IN ALL
ROOM TYPES
**NOTE: SEALED FOR MOISTURE RESISTANCE
***NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
LM/CK/HR UPDATED 1/4/17
GLOBAL DESIGN
Specification
MATERIAL CLASS: MATTRESS INNERSPRING
TYPE: SERTA PERFECT SLEEPER CORPORATE SUITE II PLUSH - ONE
SIDED NON FLIP
SIZE: QUEEN
DIMENSIONS: 60" W X 80" L X 12.25" H
PRIMARY INSULATION: FIRE BLOCKER INSULATOR PAD
INNERSPRING: CONTINUOUS WIRE UNIT - 9 GAUGE BORDER WIRE.
POSTURIZED CENTER THIRD. STEEL REINFORCED EDGES. HEAD TO
TOE HELICALS COOL TWIST GEL MEMORY FOAM
UPHOLSTERY: 2" POLY FOAM, HEAVY DUTY SYNTHETIC FIBER PAD
QUILT CONSTRUCTION PANEL: FIREBLOCKER, 1 1/2" SERTA
PILLOWSOFT FOAM
PANEL TICK: NANOTEX TICK (#73029)
BORDER TICK: NANOTEX TICK (#73029)
COIL COUNT: FOAM ENCASED CONTINUOUS WIRE SPRING UNIT 800
COIL COUNT DENSITY
STAIN REPELLENT & FABRIC UPGRADE AVAILABLE FOR AN
UPCHARGE
WARRANTY: NON-PRORATED 10 YEAR WARRANTY
WARRANTY: 10 YEARS NON PRORATED. COVERS MATTRESS THAT IS
USED WITH ANOTHER MANUFACTURER'S BOXSPRING OR SUITABLY
CONSTRUCTED PLATFORM
NORMAL DELIVERY: 10 WORKING DAYS
COMPLIANCE WITH SPECIFIC FLAMMABILITY CODES:16 C FR 1632, TB
129, CAL. TB 603
USA: FREIGHT: FREE FREIGHT WITHIN THE CONTINENTAL US
ADDITIONAL CHARGE: A $75 STOP CHARGE FEE WILL BE ADDED TO
ORDERS OF LESS THAN 12 SETS WITHIN 250 KM OF FACTORY. Room Types Where This Is Used
CANADIAN FREIGHT: FREE FREIGHT WITH MINIMUM ORDER OF 12 Guestrooms - QQ Accessible Left Q-210M1
SETS(24 PIECES) OR MORE, WITHIN 250 KM OF THE NEAREST SERTA
PLANT. FOR ORDERS THAT ARE LESS THAN 12 SETS(24 PIECES), Guestrooms - QQ Accessible Right Q-210M1
WITHIN 250 KM OF THE NEAREST SERTA PLANT, A $75 STOP CHARGE Guestrooms - QQ Left Q-210M1
FEE WILL BE ADDED. ANY DELIVERIES THAT ARE OUTSIDE THE 250
KM RADIUS WOULD REQUIRE A FREIGHT QUOTE. Guestrooms - QQ Right Q-210M1
CANADIAN FACTORIES: MONTREAL, TORONTO, VANCOUVER, Guestrooms - QQ Suite Accessible Left Q-210M1
WINNIPEG.
CANADA: COMPLIANCE W/ SPECIFIC COUNTRY'S FLAMMABILITY Guestrooms - QQ Suite Accessible Right Q-210M1
AS/BMC UPDATED 7/9/15 Guestrooms - QQ Suite Left Q-210M1
Guestrooms - QQ Suite Right Q-210M1
GLOBAL DESIGN
Specification
ITEM: SIMMONS BEAUTYREST WORLD CLASS PLUSH MATTRESS-
HYDE PARK RECHARGE
SIZE: QUEEN
DIMENSIONS: 60"W X 80"L X 12"H
PRIMARY INSULATION: 1/2" BLOC FOAM (COIL SUPPORT)
UPHOLSTERY: 1.5" TRANSFLEXION FOAM
QUILT CONSTRUCTION:
1ST LAYER: 1.2 OZ FR FIBER
2ND LAYER: 1" AIR COLL FOAM
1" WAVE CONVOLUTED FOAM
EDGE SUPPORT: 3" FOAM RAILS FEATURING DIAMOND VENTILATION
FOR ENHANCED AIRFLOW
BORDER FILL: 1.0 OZ FR FIBER
SOIL/STAIN: NANO-TEX PERMANENT SPILL & STAIN PROTECTION
PANEL TICK: TACK AND JUMP
COIL COUNT: 1000 DENSITY
COIL GAUGE: 15.5
WARRANTY: 10/10 NON-PRORATED
FREIGHT: MINIMUM ORDER OF 10 SETS, LESS THAN 10 SETS WILL
INCUR A ONE-TIME $50.00 STOP CHARGE.
CANADIAN FREIGHT TERMS: FOB POINTS ARE MONTREAL,
TORONTO,VANCOUVER, AND CALGARY. FREIGHT IS INCLUDED FOR
ORDER DELIVERING WITHIN THE CITY LIMITS OF THESE 4 PLANTS.
FOR ALL OTHER OTHERS, CALL FOR FREIGHT QUOTE.
NOTE: PRICING FOR MEXICO, PUERTO RICO, AND HAWAII WILL VARY
AND NEEDS TO BE CONFIRMED WITH SUPPLIER
NOTE:
- 15" POCKET FITTED SHEET REQUIRED Room Types Where This Is Used
- COORDINATE WITH SHEET PURCHASE FOR NEW BUILD HOTELS Guestrooms - QQ Accessible Left Q-210M2
- FOR RENOVATIONS, A MODEL ROOM REVIEW IS RECOMMENDED TO
CONFIRM THE HOTEL'S EXISTING INVENTORY OF SHEETS WILL FIT Guestrooms - QQ Accessible Right Q-210M2
- NEW FITTED BOTTOM SHEETS MAY BE REQUIRED Guestrooms - QQ Left Q-210M2
CARTONING INCLUDED
AS/BMC UPDATED 7/8/15 Guestrooms - QQ Right Q-210M2
Guestrooms - QQ Suite Accessible Left Q-210M2
Guestrooms - QQ Suite Accessible Right Q-210M2
Guestrooms - QQ Suite Left Q-210M2
Guestrooms - QQ Suite Right Q-210M2
GLOBAL DESIGN
Specification
**ALL PRICING INCLUDED DELIVERY (SEE DELIVERY MAP)50 SETS/100
PIECES TO THE WEST COAST OR 25 SETS/50 PIECES TO THE EAST
COAST.
ITEM: QUEEN 12" MATTRESS - FOAM, PRESIDENTIAL
SIZE: QUEEN
DIMENSIONS: W: 60" L: 80" HT: 12"
WEIGHT/CUBE: QN: 62 LBS
TOP PANEL: MULTI-QUILTED, SAFE SLUMBER FR WITH 1" GEL
INFUSED SS FOAM + 1" SS FOAM.
COLOR: SILVER/GREY/WHITE BLACKGROUND
SOIL/STAIN FINISH: ALTA SPILL & STAIN PROTECTION
TICKING: SILVER/GREY DAMASK. BORDERS WILL BE MULTI-QUILTED
TO SAFE SLUMBER FR.
NOTE: 10" LAMINATED HIGH DENISTY POLYURETHANE CORE
CONSISTING OF A 7" FIRM BASE CORE LAMINATED 3" TOP LAYER.
SAFE SLUMBER 16CFR 1633 COMPLIANT SURROUND BARRIER.
LAMINATED CORE COMPRISED OF:
7" 1.8 DENSITY 28 LB. IFD MIDDLE BASE LAYER
3" 1.8 DENSITY 20 LB. IFD TOP LAYER
DENSITY : 1.75- 1.85
* ALL CORES PRE-CRUSHED PRIOR TO SPECIFICATION RATINGS.
WARRANTY: 10 YEARS FULL
FLAMMABILITY RATING: 16 CFR 1633 SAFE SLUMBER COMPLIANT
SURROUND BARRIER ACROSS TOP, BOTTOM AND SIDES OF
MATTRESS AND SEWN WITH KEVLAR THREAD.
**NOTE: THIS MATTRESS IS SPECIFICALLY DESIGNED FOR USE WITH
PLATFORM BEDS, RIGID FOUNDATIONS, WORKING BOX SPRINGS
AND ADJUSTABLE BED BASES. EITHER A SOLID FLAT SURFACE OR A Room Types Where This Is Used
SLATED SURFACE IS ACCEPTABLE(SLAT NO MORE THAN 4" APART) Guestrooms - QQ Accessible Left Q-210M3ALTA
FOR A PLATFORM BED. THE ENTIRE OUTSIDE MATTRESS PERIMETER
SHOULD BE SUPPORTED. Guestrooms - QQ Accessible Left Q-210M3ALTB
FOB- JAMISON PLANT GALLATIN, TN Guestrooms - QQ Accessible Right Q-210M3ALTA
CARTONING INCLUDED ON SMALLER ORDERS, NOT ON TRUCKLOAD
QUANTITIES. Guestrooms - QQ Left Q-210M3ALTA
AS/BMC/HR UPDATED 9/1/16 Guestrooms - QQ Right Q-210M3ALTA
Guestrooms - QQ Suite Accessible Left Q-210M3ALTA
Guestrooms - QQ Suite Accessible Right Q-210M3ALTA
Guestrooms - QQ Suite Left Q-210M3ALTA
Guestrooms - QQ Suite Right Q-210M3ALTA
Guestrooms - QQ Accessible Right Q-210M3ALTB
Guestrooms - QQ Left Q-210M3ALTB
Guestrooms - QQ Right Q-210M3ALTB
Guestrooms - QQ Suite Accessible Left Q-210M3ALTB
Guestrooms - QQ Suite Accessible Right Q-210M3ALTB
GLOBAL DESIGN
GLOBAL DESIGN
Specification
**ALL PRICING INCLUDED DELIVERY (SEE DELIVERY MAP)50 SETS/100
PIECES TO THE WEST COAST OR 25 SETS/50 PIECES TO THE EAST
COAST.
ITEM: QUEEN 12" MATTRESS - FOAM, PRESIDENTIAL
SIZE: QUEEN
DIMENSIONS: W: 60" L: 80" HT: 12"
WEIGHT/CUBE: QN: 62 LBS
TOP PANEL: MULTI-QUILTED, SAFE SLUMBER FR WITH 1" GEL
INFUSED SS FOAM + 1" SS FOAM.
COLOR: SILVER/GREY/WHITE BLACKGROUND
SOIL/STAIN FINISH: ALTA SPILL & STAIN PROTECTION
TICKING: SILVER/GREY DAMASK. BORDERS WILL BE MULTI-QUILTED
TO SAFE SLUMBER FR.
NOTE: 10" LAMINATED HIGH DENISTY POLYURETHANE CORE
CONSISTING OF A 7" FIRM BASE CORE LAMINATED 3" TOP LAYER.
SAFE SLUMBER 16CFR 1633 COMPLIANT SURROUND BARRIER.
LAMINATED CORE COMPRISED OF:
7" 1.8 DENSITY 28 LB. IFD MIDDLE BASE LAYER
3" 1.8 DENSITY 20 LB. IFD TOP LAYER
DENSITY : 1.75- 1.85
* ALL CORES PRE-CRUSHED PRIOR TO SPECIFICATION RATINGS.
WARRANTY: 10 YEARS FULL
FLAMMABILITY RATING: 16 CFR 1633 SAFE SLUMBER COMPLIANT
SURROUND BARRIER ACROSS TOP, BOTTOM AND SIDES OF
MATTRESS AND SEWN WITH KEVLAR THREAD.
**NOTE: THIS MATTRESS IS SPECIFICALLY DESIGNED FOR USE WITH
PLATFORM BEDS, RIGID FOUNDATIONS, WORKING BOX SPRINGS
AND ADJUSTABLE BED BASES. EITHER A SOLID FLAT SURFACE OR A Room Types Where This Is Used
SLATED SURFACE IS ACCEPTABLE(SLAT NO MORE THAN 4" APART) Guestrooms - QQ Accessible Left Q-210M3ALTA
FOR A PLATFORM BED. THE ENTIRE OUTSIDE MATTRESS PERIMETER
SHOULD BE SUPPORTED. Guestrooms - QQ Accessible Left Q-210M3ALTB
FOB- JAMISON PLANT GALLATIN, TN Guestrooms - QQ Accessible Right Q-210M3ALTA
CARTONING INCLUDED ON SMALLER ORDERS, NOT ON TRUCKLOAD
QUANTITIES. Guestrooms - QQ Left Q-210M3ALTA
AS/BMC/HR UPDATED 9/1/16 Guestrooms - QQ Right Q-210M3ALTA
Guestrooms - QQ Suite Accessible Left Q-210M3ALTA
Guestrooms - QQ Suite Accessible Right Q-210M3ALTA
Guestrooms - QQ Suite Left Q-210M3ALTA
Guestrooms - QQ Suite Right Q-210M3ALTA
Guestrooms - QQ Accessible Right Q-210M3ALTB
Guestrooms - QQ Left Q-210M3ALTB
Guestrooms - QQ Right Q-210M3ALTB
Guestrooms - QQ Suite Accessible Left Q-210M3ALTB
Guestrooms - QQ Suite Accessible Right Q-210M3ALTB
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: QUEEN - POSTURPEDIC MATTRESS
TYPE: 13.75 GAUGE, 7 TURN ENCASED INNERSPRING MATTRESS
SIZE: QUEEN
DIMENSIONS: 60" W X 80" L X 12 3/4" H
PRIMARY INSULATION: 2.5" X 7.5" MRV FOAM RAILS, MTB + 4ES + .5"
MARVELUX
UPHOLSTERY: LT FR RAYON FIBER + 8.5" FLG, 1" SS POLY, 1" SS
POLY, MT Z1-PCR-C: 1.5"/1.5"
QUILT CONSTRUCTION: ZONED QUILT PATTERN
PANEL TICK: 3220 CHESTNUT
BORDER TICK: 5734 NATURAL
COIL COUNT: 713
WARRANTY: NON-PRORATED 10 YEAR WARRANTY PLUS THE
PATENTED UNICASED SYSTEM.
WARRANTY COVERS 1.5" BODY IMPRESSION
WARRANTY DOES NOT COVER MATTRESS THAT IS USED WITH
ANOTHER MANUFACTURERS BOXSPRING.
9" HOSPITALITY GRADE FOUNDATIONS ARE STANDARD
7" AND 5 1/2" LOW PROFILE FOUNDATIONS ARE AVAILABLE AT NO
EXTRA CHARGE FOR TAILGATE DELIVERY TO COMMERCIAL LOADING
DOCK DURING STANDARD WORKING HOURS, 8 A.M. - 4 P.M., M-F.
LOADING DOCK MUST ACCOMMODATE 53 FT. TRACTOR-TRAILER.
HANDLING MAY INCUR ADDITIONAL DELIVERY CHARGES.
NORMAL DELIVERY IS 3 WEEKS LEAD TIME.
COMPLIANCE WITH SPECIFIC FLAMMABILITY CODES, SUCH AS
BOSTON IX - II, CAL 129, CAL 603.
HONG KONG OR UK AVAILABLE AT AN UPCHARGE.
PRICES DO NOT INCLUDE APPLICABLE STATE AND LOCAL TAXES. Room Types Where This Is Used
FREIGHT: FREE FREIGHT SHIPPING IN THE CONTINENTAL US WITH Guestrooms - QQ Accessible Left Q-210M4
NO MINIMUMS
TAG: ARTESIA HD Guestrooms - QQ Accessible Right Q-210M4
AS/BMC Guestrooms - QQ Left Q-210M4
Guestrooms - QQ Right Q-210M4
Guestrooms - QQ Suite Accessible Left Q-210M4
Guestrooms - QQ Suite Accessible Right Q-210M4
Guestrooms - QQ Suite Left Q-210M4
Guestrooms - QQ Suite Right Q-210M4
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED-QUEEN-BLACK
OVERALL DIM: 59"W X 79 1/2"L X 12"H
BASE: 10 5/8" H BASE RECESSED 8" ON EACH SIDE AND END
PLATFORM EDGE: 1MM THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPES IN GRID
PATTERN USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/5/17
GLOBAL DESIGN
Specification
ITEM: QUEEN/QUEEN HEADBOARDS FOR READING LIGHTS WITH 28"
ADA CENTER PANEL
OVERALL DIM: 164"W X 3"D X 68"H
HEADBOARDS - 68"W
CENTER PANEL - 28"W WITH REMOVABLE ACCESS PANEL FOR
ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING, HORIZONTAL ON TOP OF
HEADBOARDS, CENTER PANEL AND PANEL BEHIND HEADBOARD
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 4) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 13/16" X 1 1/4" HOLE IN CENTER PANEL FOR COM
NIGHTSTAND SCONCE, 1" DIA HOLE ON OUTSIDE WOOD FRAMING 44"
ABOVE BOTTOM OF HEADBOARD FOR COM READING LIGHTS
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS
USED WITH 28" NIGHTSTAND, Q-201CNADA Room Types Where This Is Used
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms - QQ Accessible Left Q-201ADA
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF Guestrooms - QQ Suite Left Q-212A
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED Guestrooms - QQ Accessible Right Q-201ADA
WITH THIS REGULATION
CARTONING INCLUDED IN COST Guestrooms - QQ Suite Accessible Left Q-201ADA
LM/HR UPDATED 1/23/17 Guestrooms - QQ Suite Accessible Right Q-201ADA
Guestrooms - QQ Suite Right Q-212A
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED-QUEEN-BLACK-FOR ACCESSIBLE ROOMS
OVERALL DIM: 59"W X 79 1/2"L X 12"H
BASE: 10 5/8"H BASE RECESSED 8" ON EACH SIDE AND 5" AT THE END
CUT OUT AT BASE: ON BOTH LONG SIDES OF PLATFORM BASE, 55
1/2"W X 7"H
PLATFORM EDGE: 1ML THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPES IN GRID
PATTERN USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/CK 3/2/17
GLOBAL DESIGN
Specification
DESCRIPTION: LEFT 43" QUEEN REFRIGERATOR MICROWAVE
CLOSET UNIT - TAMPER RESISTANT
OVERALL DIMENSIONS: 43"W X 34"D X 85"H
UPPER CAVITY: 20 1/2"W X 15 1/2"D X 11 3/4"H
MICROWAVE CAVITY: 20 1/2"W X 15 1/2"D X 12 1/2"H
COFFEE MAKER CAVITY: 20 1/2"W X 15 1/2"D X 19 1/2"H
REFRIGERATOR CAVITY: 19"W X 19 3/4"D X 23 3/8"H - FITS
REFRIGERATOR SIZED 18 1/2"W X 19"D X 22 3/8"H
WOOD SOLIDS: POPLAR
FINISH: MODIFIED POLYURETHANE
STAIN COLOR: TO MATCH ANSONART 48846NT OILED LEGNO,
KIMBALL KH-22084-C
SHEEN LEVEL: 10 +/- 5
LAMINATE ON SHELVES, SURFACES AND FACING EDGES: ANSONART
48846NT OILED LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
(US)
LAMINATE ON KICK BASE: WILSON ART 1595-60 BLACK
VENEER: KIMBALL: AMERICAN WALNUT #2C
CROWN: 4" HIGH, VENEER FACED, 7 1/2" RADIUS AT CORNER
SHELVES:
MICROWAVE SHELF: 20 1/2"W X 15 1/2"D X 2 1/2"H
COFFEE MAKER SHELF: 20 1/2"W X 15 1/2"D X 1 9/16"H
UPPER SHELF: 20 1/2"W X 15 1/2"D X 3/4"H
CLOSET SHELF: 21"W X 24"D X 1 1/2"H
CORD ACCESS:
MICROWAVE: 9"W X 6"H REMOVABLE ACCESS PANEL ATTACHED
W/VELCRO AT SIDE
REFRIGERATOR: 12" X 12" CUT OUT AT SIDE
OUTLET SET: FURNLITE FC-739, 6.65"L X 2.21"W X 2.18"D, INCLUDES
TWO TAMPER RESISTANT CONVENIENCE OUTLETS AND TWO 10
WATT 2.1 AMP CHARGING USB PORTS, 10' GROUNDED CORD, UL
LISTED
DOOR: 22 1/2"W X 3/4"D X 77"H
DOOR SWING: 120 DEGREES
DOOR PULL: CUSTOM W/MATTE BLACK FINISH - TENG FENG, DA09-2-6
BK
GLIDES: 4 ADJUSTABLE LEVELING GLIDES (1 AT EACH CORNER)
BOTTOM PANEL EDGE: 2MM PVC EDGEBANDING - TO MATCH
FORMICA OILED LEGNO, 7 1/2" RADIUS AT CORNER Room Types Where This Is Used
BASE: RECESS: 1.5" / HEIGHT: 4" Guestrooms - QQ Left Q-270L
HARDWARE:
-CLOTHES PEG: JG EDELEN #1878; 1"DIA X 3"L; FINISH - BLACK MATTE Guestrooms - QQ Suite Left Q-270L
POWDER COAT 049/80350 (OR EQUAL)
-CLOTHES ROD: FENG SHENG EH0160; 1" DIA ROD W/FLANGES;
POLISHED CHROME FINISH (OR EQUAL)
-IRON HOLDER: ROYAL PACIFIC CORP #10-200 WHITE (OR EQUAL)
-IRONING BOARD HOOK: AMERICAN HOTEL REGISTRY D7B1201531
(OR EQUAL)
LIGHT UNDER SHELF: KIMBALL - PILOT-DTF-LED-12, 12" LED UNDER
GLOBAL DESIGN
GLOBAL DESIGN
Specification
DESCRIPTION: RIGHT 43" QUEEN REFRIGERATOR MICROWAVE
CLOSET UNIT - TAMPER RESISTANT
OVERALL DIMENSIONS: 43"W X 34"D X 85"H
UPPER CAVITY: 20 1/2"W X 15 1/2"D X 11 3/4"H
MICROWAVE CAVITY: 20 1/2"W X 15 1/2"D X 12 1/2"H
COFFEE MAKER CAVITY: 20 1/2"W X 15 1/2"D X 19 1/2"H
REFRIGERATOR CAVITY: 19"W X 19 3/4"D X 23 3/8"H - FITS
REFRIGERATOR SIZED 18 1/2"W X 19"D X 22 3/8"H
WOOD SOLIDS: POPLAR
FINISH: MODIFIED POLYURETHANE
STAIN COLOR: TO MATCH ANSONART 48846NT OILED LEGNO,
KIMBALL KH-22084-C
SHEEN LEVEL: 10 +/- 5
LAMINATE ON SHELVES: SURFACES AND FACING EDGES: ANSONART
48846NT OILED LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
(US)
LAMINATE ON KICK BASE: WILSONART 1595-60 BLACK
VENEER: KIMBALL: VICWOOD AMERICAN WALNUT #2C
CROWN: 4" HIGH, VENEER FACED, 7 1/2" RADIUS AT CORNER
SHELVES:
MICROWAVE SHELF: 20 1/2"W X 15 1/2"D X 2 1/2"H
COFFEE MAKER SHELF: 20 1/2"W X 15 1/2"D X 1 9/16"H
UPPER SHELF: 20 1/2"W X 15 1/2"D X 3/4"H
CLOSET SHELF: 21"W X 24"D X 1 1/2"H
CORD ACCESS:
MICROWAVE: 9"W X 6"H REMOVABLE ACCESS PANEL ATTACHED W/
VELCRO AT SIDE
REFRIGERATOR: 12" X 12" CUT OUT AT SIDE
OUTLET SET: FURNLITE FC-739, 6.65"L X 2.21"W X 2.18"D, INCLUDES
TWO TAMPER RESISTANT CONVENIENCE OUTLETS AND TWO 10
WATT 2.1 AMP CHARGING USB PORTS, 10' GROUNDED CORD, UL
LISTED
DOOR: 22 1/2"W X 3/4"D X 77"H
DOOR SWING 120 DEGREES
DOOR PULL: CUSTOM W/ MATTE BLACK FINISH - TENG FENG, DA09-2-
6 BK
GLIDES: 4 ADJUSTABLE LEVELING GLIDES (1 AT EACH CORNER)
BOTTOM PANEL EDGE: 2MM PVC EDGEBANDING - TO MATCH
FORMICA OILED LEGNO, 7 1/2" RADIUS AT CORNER Room Types Where This Is Used
BASE: RECESS: 1.5" / HEIGHT: 4" Guestrooms - QQ Right Q-270R
HARDWARE:
-CLOTHES PEG: JG EDELEN #1878; 1"DIA X 3"L; FINISH - BLACK MATTE Guestrooms - QQ Suite Right Q-270R
POWDERCOAT 049/80350 (OR EQUAL)
-CLOTHES ROD: FENG SHENG EH0160; 1" DIA ROD W/ FLANGES;
POLISHED CHROME FINISH (OR EQUAL)
-IRON HOLDER: ROYAL PACIFIC CORP #10-200 WHITE (OR EQUAL)
-IRONING BOARD HOOK: AMERICAN HOTEL REGISTER D7B1201531
(OR EQUAL)
LIGHT UNDER SHELF: KIMBALL - PILOT-DTF-LED-12, 12" LED UNDER
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - MAIN GUESTROOM AND BATH
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: NO
PATTERN: MAR230
COLOR: ALABASTER
EMBOSSING: FINE HORIZONTAL CREPE
WIDTH: 52"-54"
REPEAT: H: N/A V: N/A
INSTALLATION NOTE: REVERSIBLE HANG/ RANDOM MATCH
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II / 20 OZ.
FSR: CLASS A
BACKING: OSNABURG
FILM BASE COLOR: STONE
INK TYPE/APPLICATION: WATER-BASED INKS
TOP COAT: CLEAR ACRYLIC TOPCOAT
RECYCLED CONTENT: YES; CONTAINS 20% PRE-CONSUMER
RECYCLED CONTENT
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 12/2/16
GLOBAL DESIGN
Specification
ITEM: WOOD WALLCOVERING - GUESTROOM-SUITES ACCENT
ROLL SIZE: 55 LY; MINIMUM ORDER IS 55 LY; MUST ORDER IN 55 LY
INCREMENTS
CUSTOM: NO
PATTERN: 55FF-17-01
COLOR: FAIRFIELD INN GUESTROOM ACCENT
EMBOSSING: N/A
WIDTH: 36"
REPEAT: H: N/A V: N/A
TYPE/WEIGHT: WOOD WALLCOVERING
INSTALLATION NOTE: STRAIGHT HANG; RANDOM MATCH
DOUBLE CUT OVERLAP IN INCHES: WHEN DOUBLE-CUTTING, WE
RECOMMEND THAT 2-3" WIDE STRIPS OF THE WALLCOVERING BE
PLACED BEHIND THE SEAM TO STOP SCORING OR CUTTING INTO
THE WALL. AFTER DOUBLE-CUTTING, PEEL OUT THE STRIP, PAT
DOWN THE SEAM AND WASH OFF EXCESS PASTE WITH A WET
SPONGE AND CLEAN WATER. LIGHTLY ROLL SEAMS TO SET IN
PLACE. USE STRIPS IN EXACT ORDER AS THEY ARE CUT FROM ROLL.
FILL IN OVER DOORS AND WINDOWS WITH STRIPS CUT IN
CONSECUTIVE ORDER FROM THE ROLL. HANG ONLY 1-2 STRIPS AT A
TIME. NATURAL WALLCOVERING WILL TEND TO LIGHTLY PANEL ON
OCCASION.
SPECIAL NOTE: AS WITH ALL ORGANIC MATERIALS, IRREGULARITIES
ARE A NORMAL OCCURANCE THAT ENHANCE THE HANDMADE
APPEARANCE.
CLEANING: THIS MATERIAL HAS BEEN TREATED WITH A WASHABLE
FINISH TO ALLOW THE WASHING OF STAINS. STAINS SHOULD BE
TREATED ASAP WITH CLEAN WATER BY USING A SOFT CLOTH OR
SPONGE. FOR HARDER STAINS, A MILD DETERGENT SOLUTION OF
WARM WATER CAN BE USED. BE CAREFUL NOT TO FLOOD THE
SURFACE. AVOID HARD RUBBING OF SPOTS SO THAT
DISCOLORATION WILL NOT OCCUR. MORE CARE SHOULD BE TAKEN
IN CLEANING ANY DARK COLORS TO AVOID "LIGHT MARKS" ON THE
MATERIAL. WOOD USED IN THIS PRODUCT IS CERTIFIED BY THE FSC.
FSR ASTM E-84, CLASS A REQUIRED: YES
BACKING: 100% CELLULOSE
FILM BASE COLOR: N/A
INK TYPE/APPLICATION: WATER-BASED INKS & COATINGS
TOP COAT: N/A Room Types Where This Is Used
RECYCYLED CONTENT: NO; MEETS CAL 1350 INDOOR QUALITY Guestrooms - Guestroom Wall Covering V-312
STANDARD
PACKAGING: ROLLS POLYBAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED; PALLETS
PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED
GC/CK 12/7/16
GLOBAL DESIGN
Specification
ITEM: WALL VINYL - GUESTROOM BATH ACCENT
ROLL SIZE: 30 LY; MUST ORDER IN 30 YARD INCREMENTS
CUSTOM: NO
PATTERN: MAR244
COLOR: CADET
EMBOSSING: CHEVY
WIDTH: 54"
REPEAT: H: N/A V: 42"
INSTALLATION NOTE: RANDOM NON-REVERSIBLE
DOUBLE CUT OVERLAP IN INCHES: MINIMUM 1.5" TO 2"
TYPE/WEIGHT: TYPE II/20 OZ.
FSR: CLASS A
BACKING: OSNABURG
FILM BASE COLOR: SAND
INK TYPE/APPLICATION: WATER-BASED INKS AND ADHESIVES, NO
HEAVY METALS OR SOLVENTS
TOP COAT: INCLUDED IN INK APPLICATION PROCESS
RECYCLED CONTENT: NO
OTHER: MEETS CA01350 FOR INDOOR AIR QUALITY, CERTIFIED
NSF/ANSI 342 SUSTAINABLE WALLCOVERINGS, FORMALDEHYDE
FREE AND HEAVY METAL FREE
PACKAGING: ROLLS BAGGED, TAGGED AND PALLETIZED
SEQUENTIALLY WITH HANGING INSTRUCTIONS INCLUDED
- PALLETS: PYRAMID PACKED AND SHRINK WRAPPED
CARTONING INCLUDED IN COST
GC/CK 12/7/16
GLOBAL DESIGN
Specification
ITEM: GUESTROOM CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X325D
COLOR NUMBER(S): X325D
CUSTOM: YES
WIDTH: 13'
PATTERN REPEAT: V: 156" H: 165"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.25"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 32 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
ITEM: GUESTROOM CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: 50341 K-9225
COLOR NAME: GRAY
JOB/MEMO#: N/A
CUSTOM DESIGN/COLOR: YES; STRIKE-OFF NUMBER: 50341 K-9225
WIDTH/SIZE: 13'6"
PATTERN REPEAT: H: N/A V: N/A
YARN COMPOSITION: 100% NYLON
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 12
FINISHED FACE/PILE WEIGHT: 32 OZ.
FINISHED PILE HEIGHT: 03/32, 6/32, 11/32
YARN DENSITY:
YARN PLY:
YARN DENIER:
STITCHES PER INCH: 11.1
BACKING:
PRIMARY: POLYPROPYLENE
SECONDARY: CLASSICBAC
ALL CARPET MUST MEET:
COLOR FASTNESS: 4-5
LIGHT FASTNESS: 4-5
FLAMMABILITY: ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE WRAP: 80%
TUFT BIND: 2.5 FOR CUT & LOOP; 2 FOR CUT
DELAMINATION: 4.5LBS
TWISTS PER INCH: 4.5
WEAR WARRANTY: LIFETIME
STAIN WARRANTY: SENTRY PLUS SOIL & STAIN
OTHER TOPICAL TREATMENTS:
OTHER WARRANTIES: 2 YEAR MANUFACTURING DEFECTS
VERIFIED QUANTITIES: MUST BE VERIFIED BY INSTALLER
RECYCLED CONTENT: YES; CONTAINS 39% PRE-CONSUMER
RECYCLED CONTENT
TO GO WITH BASE: MARRIOTT ID# 271609
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
NOTE: CRI: GREEN LABEL PLUS APPROVED FOR INDOOR QUALITY Room Types Where This Is Used
STANDARDS Guestrooms - Guestroom Carpet X-001ALT2
GC/CK 1/10/17
GLOBAL DESIGN
Specification
CARPET STEWARDSHIP ASSESSMENT
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR GUESTROOM CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X210C
COLOR #: X210C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X210C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Guestrooms - Guestroom Carpet X-002BALT1
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR GUESTROOM
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: 50741-K9912
COLOR #: ACCENTS III
CUSTOM DESIGN/COLOR: YES; STRIKE-OFF NUMBER: 50741-K9912
JOB/MEMO #:
WIDTH: 4" BOUND
PATTERN REPEAT: V: N/A H: N/A
YARN PLY:
YARN COMPOSITION: 100% NYLON
DYE METHOD: SKEIN DYED
GAUGE/TYPE: 1/10
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.339
YARN DENSITY: 4612 OZ C/YRD
YARN DENIER:
STITCHES PER INCH: 10
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
RECYCLED CONTENT: YES; 39% PRE-CONSUMER
WEAR WARRANTY: LIFETIME
STAIN WARRANTY: SENTRY PLUS SOIL & STAIN
OTHER TOPICAL TREATMENTS:
OTHER WARRANTIES: 2 YEAR MANUFACTURING DEFECTS
CERTIFICATIONS: LEED INFO - CRI GREEN LABEL PLUS APPROVED
FOR INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED; Room Types Where This Is Used
INCLUDED IN COST Guestrooms - Guestroom Carpet X-002BALT2
GC/CK 1/10/17
GLOBAL DESIGN
Specification
ITEM: PADDING FOR STRETCH-IN INSTALLATION
AREA: GUESTROOM
STYLE: ONYX
OUNCE WEIGHT: 56 OZ
COLOR: BLACK
DENSITY: 20 LBS.
THICKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
SHIPPING WEIGHT/ROLL: 110 LBS.
ROLL SIZE: 54"W X 60'L = 30 SY
PILL TEST: PASS
MOISTURE RESISTANCE: 98%
COMPRESSION LOAD DEFLEC: 0.9 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED - LIFE OF CARPET
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATE 05.29.12)
GLOBAL DESIGN
Specification
ITEM: PADDING FOR STRETCH-IN INSTALLATION
AREA: GUESTROOM
STYLE: ONYX
OUNCE WEIGHT: 56 OZ
COLOR: BLACK
DENSITY: 20 LBS.
THICKNESS: .250
CONTENT: 100% STYRENE BUTADIENE RUBBER (SBR)
SHIPPING WEIGHT/ROLL: 110 LBS.
ROLL SIZE: 54"W X 60'L = 30 SY
PILL TEST: PASS
MOISTURE RESISTANCE: 98%
COMPRESSION LOAD DEFLEC: 0.9 LBS PSI
FLAME RETARDANCY: DOC-FF-1-70-PILL TEST
ANTI-MICROBIAL TREATMENT: GUARDIAN
WARRANTY: COMMERCIAL: LIMITED - LIFE OF CARPET
NOTE: LEED AND LEED-CI CERTIFICATION: ALL SCI (SPONGE
CUSHION, INC.) SPONGE CUSHION SBR PRODUCTS QUALIFY FOR
LEED CERTIFICATION UNDER THE USGBC STANDARD FOR LOW
EMITTING MATERIALS. SCI PRODUCTS MEET THE CRI GREEN LABEL
STANDARD PER LEED-CI SECTION 4.3 EQ.
NOTE: CRI: GREEN LABEL APPROVED FOR INDOOR AIR QUALITY
STANDARDS
GC/SJT/CK (UPDATE 05.29.12)
GLOBAL DESIGN
Specification
ITEM: FABRIC - DRAPE-100% BLACKOUT
PATTERN: DENIMTONE
COLOR: BUFF FR
WIDTH: 54"
ORIENTATION: UP THE ROLL
CONTENT: 100% POLYESTER BASE, 3 PASS FOAM COATING
REPEAT: N/A
COATING ADHESION, 3 LBS MINIMUM
COLD CRACK, 20 DEGREES F/NO CRACKING
SEAM STRENGTH: 25 LBS MIN (WOVENS), 35 LBS MIN (NON WOVENS),
30 X 25 LBS MIN (KNITS)
TEAR STRENGTH
4 LBS MIN (WOVEN BACKING)
TENSILE 50 LBS. MIN
FLAME CERTIFICATION: NFPA701 AND BFDIX-9
ROLL SIZE: 60 YARDS, MINIMUM ORDER
CARTONING INCLUDED
AS/BMC
GLOBAL DESIGN
Specification
ITEM: ROLLER SHADE
*NOTE: THIS IS A MARRIOTT OWNED PROPRIETARY IMAGE THAT IS
LIMITED TO FAIRFIELD INN AND SUITES BY MARRIOTT*
PATTERN: RED LEAVES
WIDTH: 72"
CONTENT: POLYESTER
FINISH: PRINTED IMAGE
APPROVED VENDOR: FABTEX
FABTEX: SOLVENT BASED INKS. 8-10 YEAR WARRANTY
COO: USA
*SEE WINDOW TREATMENT APPENDIX FOR FULL SPECIFICATONS
MLR/HR UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: ROLLER SHADE
*NOTE: MARRIOTT HAS PURCHASED THE EXTENDED RIGHTS FROM
SHUTTERSTOCK AND THE USE OF THE IMAGE IS LIMITED TO
FAIRFIELD INN AND SUITES BY MARRIOTT*
PATTERN: GREEN LEAVES
WIDTH: 72"
CONTENT: POLYESTER
FINISH: PRINTED IMAGE
APPROVED VENDOR: FABTEX
FABTEX: SOLVENT BASED INKS. 8-10 YEAR WARRANTY
COO: USA
*SEE WINDOW TREATMENT APPENDIX FOR FULL SPECIFICATONS
MLR/HR UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: ROLLER SHADE
*NOTE: MARRIOTT HAS PURCHASED THE EXTENDED RIGHTS FROM
SHUTTERSTOCK AND THE USE OF THE IMAGE IS LIMITED TO
FAIRFIELD INN AND SUITES BY MARRIOTT*
PATTERN: STREAM
WIDTH: 72"
CONTENT: POLYESTER
FINISH: PRINTED IMAGE
APPROVED VENDOR: FABTEX
FABTEX: SOLVENT BASED INKS. 8-10 YEAR WARRANTY
COO: USA
*SEE WINDOW TREATMENT APPENDIX FOR FULL SPECIFICATONS
MLR/HR UPDATED 1/23/17
GLOBAL DESIGN
Specification
ITEM: BED-PILLOW COVER ONLY AVOCADO COLORWAY
SIZE: 12" X 22" KNIFE EDGE
EDGE: KNIFE EDGE (OVERLOCK SAFETY STITCH INSIDE)
CLOSURE: ENVELOPE- 1" OVERLAP
EMBROIDERY YARN: 100% POLYESTER MONOFILAMENT
EMBROIDERY STITCHING: 116 STITCHES PER INCH (SPI) 3/16" WIDE
EMBROIDERY
STITCH COLOR: EMBROIDERY YARN COLOR BOOK OF HANGZHOU
ALICE THREAD CO.
THREE EMBROIDERY THREAD COLORS:
#655 - DARK BLUE
#1419 - GRAY
#674 - AVOCADO
EMBROIDERY IS RECTANGULAR AND INITIAL MEASUREMENTS ARE
FROM THE OUTSIDE EDGE OF THE PILLOW COVER. THERE ARE
THREE RECTANGLES OF EMBROIDERY.
OUTSIDE RECTANGLE IS 1 1/2" FROM THE OUTSIDE EDGE - COLOR
#655 - DARK BLUE
MIDDLE RECTANGLE IS 1/2" FROM THE INSIDE EDGE OF THE
OUTSIDE RECTANGLE STITCH LINE - COLOR #1419 - GRAY
INSIDE RECTANGLE IS 2" FROM THE INSIDE EDGE OF THE MIDDLE
RECTANGLE STITCH LINE - COLOR #674 - AVOCADO
FABRIC: 100% POLYESTER
CASE PACK: 48
**NOTE*: AHR HAS A SHIPPING CHARGE, BUT FREE SHIPPING FOR
ANY ORDER OVER $350. JDT HAS A SHIPPING CHARGE.
CARTON DIMENSIONS AND WEIGHT: 19" X 10" X 6.5"- 13 LBS
CARTONING INCLUDED Room Types Where This Is Used
AS/BMC/CK/BMC UPDATED 12/22/16 Guestrooms - King Accessible Left X-106A
Guestrooms - King Accessible Right X-106A
Guestrooms - King Left X-106A
Guestrooms - King Right X-106A
Guestrooms - King Suite Accessible Left X-106A
Guestrooms - King Suite Accessible Right X-106A
Guestrooms - King Suite Left X-106A
Guestrooms - King Suite Right X-106A
Guestrooms - QQ Accessible Left X-106A
Guestrooms - QQ Accessible Right X-106A
Guestrooms - QQ Left X-106A
Guestrooms - QQ Right X-106A
Guestrooms - QQ Suite Accessible Left X-106A
Guestrooms - QQ Suite Accessible Right X-106A
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: INSERT ONLY - RECTANGULAR BED PILLOW
DIMENSIONS: 12" X 22" KNIFE EDGE
INSERT COVER FABRIC: 75 X 75, 30S X 30S, 1 X 1, 100% COTTON
FILL & WEIGHT: 250 GRAMS OF 100% HOLLOW SILICONIZED
POLYESTER CONJUGATE FIBER
PACK: 12 PIECES
NOTE: SOLD IN FULL CASE PACKS
FOB POINT IN USA: SAVANNAH, GA
CARTONING INCLUDED
AS/BMC
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: DOUBLE/DOUBLE HEADBOARD FOR READING LIGHTS WITH 28"
ADA CENTER PANEL
OVERALL DIM: 152"W X 3"D X 68"H
HEADBOARDS - 62"W
CENTER PANEL - 28"W WITH REMOVABLE ACCESS PANEL FOR
ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING, HORIZONTAL ON TOP OF
HEADBOARDS, CENTER PANEL AND PANEL BEHIND MATTRESS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 4) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 13/16" X 1 1/4" HOLE IN CENTER PANEL FOR COM
NIGHTSTAND SCONCE, 1" DIA HOLE ON OUTSIDE WOOD FRAMING 44"
ABOVE BOTTOM OF HEADBOARD FOR COM READING LIGHTS
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS, USED 25"W CANTILEVER
NIGHTSTAND Room Types Where This Is Used
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms Alternate - Guestroom Options X-201ADAOPT
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD Guestroom Options
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: DOUBLE/DOUBLE HEADBOARD FOR READING LIGHTS WITH 25"
CENTER PANEL
OVERALL DIM: 149"W X 3"D X 68"H
HEADBOARDS - 62"W
CENTER PANEL - 25"W WITH REMOVABLE ACCESS PANEL FOR
ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING AND HORIZONTAL ON TOP
OF HEADBOARDS, CENTER PANEL BEHIND MATTRESS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 4) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 13/16" X 1 1/4" HOLE IN CENTER PANEL FOR COM
NIGHTSTAND SCONCE, 1" DIA HOLE ON OUTSIDE WOOD FRAMING 44"
ABOVE BOTTOM OF HEADBOARD FOR COM READING LIGHTS
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS, USED 25"W CANTILEVER
NIGHTSTAND Room Types Where This Is Used
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms Alternate - Guestroom Options X-201OPT
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD Guestroom Options
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: 72" DESK-BLACK
OVERALL DIM: 72"W X 23 1/2D X 30"H
LAMINATE: HPL-BLACK WOODGRAIN-ANSONART 3595-SV(ASIA) OR
WILSONART 1595K-28 (US)
TOP: 1 1/4" THICK
EDGE: BLACK T-MOLD EDGE - REHAU #618486 - TEXTURED BLACK
LEGS: 2" DIA ANGLED METAL LEGS WITH MOUNTING BRACKETS AT
TOP TO ATTACH TO UNDERSIDE OF DESK TOP
LEG FINISH: BLACK POWDER COAT TO MATCH TIGER DRYLAC
049/80350
GLIDES ON LEGS: NO GLIDES, CAP ENDS, SMOOTH FINISH
DRAWER: 14"W X 3"H X 16 3/4"D PENCIL DRAWER, DRAWER BOX
PAINTED BLACK, DRAWER FACE TO BE TEXTURED BLACK LAMINATE
DRAWER GLIDES: BLACK 3/4" EXTENSION SIDE GUIDES (EXPOSED)
WITH 2 L BRACKETS PER SIDE TO ATTACH TO UNDERSIDE OF DESK
*NOTE: UNDERSIDE OF DESK TOP PREDRILLED TO INSTALL DRAWER
ON LEFT OR RIGHT SIDE OF DESK
**NOTE: FINISHED FOUR SIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD, HARDWARE TO
ASSEMBLE DESK IS INCLUDED
EDGES: SEALED FOR MOISTURE RESISTANCE
***NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING: INCLUDED
LM/HR UPDATED 1/5/17
Room Types Where This Is Used
Guestrooms - King Left X-202
Guestrooms - King Right X-202
Guestrooms - King Suite Left X-202
Guestrooms - King Suite Right X-202
Guestrooms - QQ Left X-202
Guestrooms - QQ Right X-202
Guestrooms - QQ Suite Left X-202
Guestrooms - QQ Suite Right X-202
GLOBAL DESIGN
Specification
ITEM: 66" DESK WITH PIN LEGS-BLACK
OVERALL DIM: 66"W X 23 1/2"D X 30"H
LAMINATE: HPL-BLACK WOODGRAIN-ANSONART 3595-SV(ASIA) OR
WILSONART 1595K-28 (US)
TOP: 1 1/4" THICK
EDGE: BLACK T-MOLD EDGE - REHAU #618486 - TEXTURED BLACK
LEGS: 2" DIA ANGLED METAL LEGS WITH MOUNTING BRACKETS AT
TOP TO ATTACH TO UNDERSIDE OF DESK TOP, ONE SIDE FULL
HEIGHT AND ONE SIDE WITH 2 1/2" PIN LEGS TO ATTACH TO FRIDGE
OR MICROFRIDGE CABINET
LEG FINISH: BLACK POWDER COAT TO MATCH TIGER DRYLAC
049/80350
GLIDES ON LEGS: NO GLIDES, CAP ENDS, SMOOTH FINISH
NOTE: UNDERSIDE OF DESK TOP PREDRILLED TO INSTALL FULL
HEIGHT LEGS & PIN LEGS ON LEFT OR RIGHT
ORIENTATION: LEFT HAND ROOM: FULL HEIGHT LEGS ON LEFT
FACING SIDE OF DESK
RIGHT HAND ROOM: FULL HEIGHT LEGS ON RIGHT FACING SIDE OF
DESK
*NOTE: FINISHED FOUR SIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD, HARDWARE TO
ASSEMBLE DESK IS INCLUDED
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING: INCLUDED
LM/CK/HR UPDATED 1/6/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: MICROFRIDGE CABINET
OVERALL DIM: 43"W X 23 1/2"D X 26 1/4"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON DOORS AND END PANELS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
TOP: HIGH PRESSURE LAMINATE-ANSONART 48846NT OILED LEGNO
(ASIA) OR FORMICA 8846NT OILED LEGNO (US)
TOP EDGE: PVC TO MATCH OILED LEGNO
DOORS: TWO EACH
DOOR PULL: RECTANGULAR CUT OUT 8"W X 1 1/2"H CENTERED AT
TOP OF DOOR
CABINET INTERIOR: LEFT FACING SIDE WITH SINGLE HPL SHELF FOR
MICROWAVE, RIGHT FACING SIDE FOR FRIDGE, STAINED TO MATCH
EXTERIOR OF CABINET, INCLUDES VENTILATION HOLES AND HOLE
FOR CORD EXIT
INTERIOR CABINET BOTTOM PANEL: ANSONART 48846NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
CABINET CUTOUT: AT INSIDE BACK FOR VENTILATION: 12"W X 13
3/4"H
BASE: 3"H RECESSED BASE FINISHED WITH BLACK LPL WITH CUTOUT
AT TOP FRONT FOR VENTILATION
FRIDGE INTERIOR: 19 5/8"W X 20 9/16"D X 20 1/4"H CLEARANCE FOR
FRIDGE
FRIDGE: SIZED TO FIT ABSOCOLD ARD104AB14 FRIDGE, MI# 246798 -
15"W X 18 1/8"D X 20 5/8"H
MICROWAVE: SIZED TO FIT ABSOCOLD AM090DB, MI# 230913 - 18
3/8"W X 14 3/8"D X 11"H Room Types Where This Is Used
MICROWAVE INTERIOR: 18 7/8"W X 20 1/2"D X 12"H CLEARANCE FOR Guestrooms Alternate - Guestroom X-202ACALT
MICROWAVE
INSTALLATION: ATTACH TO PIN LEGS OF DESK IN THE FIELD,
Alternates Guestroom Alternates
HARDWARE TO ATTACH INCLUDED
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: LEFT CABINET
OVERALL DIM: 23"W X 23 1/2"D X 26 1/4"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON DOOR & END PANELS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
DOOR: HINGED RIGHT FACING SIDE
TOP: HIGH PRESSURE LAMINATE-ANSONART 48846 NT OILED LEGNO
(ASIA) OR FORMICA 8846NT OILED LEGNO (US)
TOP EDGES: PVC EDGE BAND TO MATCH OILED LEGNO
CABINET INTERIOR: STAINED TO MATCH EXTERIOR OF CABINET,
PREDRILLED FOR SHELF KIT WHEN USED FOR COFFEE SERVICE
INTERIOR CABINET BOTTOM PANEL: ANSONART 48846NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
DOOR PULL: CUSTOM WITH BLACK MATTE FINISH, TENG FENG DA09-
26-BK
CABINET CUTOUT: 12"W X 13 3/4"H FOR VENTILATION
BASE: 3"H RECESSED BASE FINISHED WITH BLACK LPL WITH CUTOUT
AT TOP FRONT FOR VENTILATION
NOTE: THIS CABINET IS USED TO HOLD A REFRIGERATOR OR USED
WITH X-202ACS SHELF KIT DEPENDENT ON ROOM TYPE
CABINET INTERIOR: 20"W X 20 13/16"D X 21 1/4"H CLEARANCE FOR
REFRIGERATOR
FRIDGE: SIZED TO FIT ABSOCOLD ARD104AB14 FRIDGE, MI# 246798 -
15"W X 18 1/8"D X 20 5/8"H
ORIENTATION: REFRIGERATOR CABINET IS INSTALLED CLOSEST TO
WINDOW WITH DESK PIN LEGS ATTACHED ON LEFT FACING SIDE OF Room Types Where This Is Used
CABINET. DOOR IS HINGED ON WINDOW SIDE (RIGHT FACING SIDE) Guestrooms - King Accessible Left X-202ACL
INSTALLATION: ATTACH TO PIN LEGS OF DESK IN THE FIELD,
HARDWARE TO ATTACH INCLUDED Guestrooms - King Suite Accessible Left X-202ACL
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms - QQ Accessible Left X-202ACL
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF Guestrooms - QQ Suite Accessible Left X-202ACL
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: RIGHT CABINET
OVERALL DIM: 23"W X 23 1/2"D X 26 1/4"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON DOORS AND END PANELS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
TOP: HIGH PRESSURE LAMINATE-ANSONART 48846NT OILED LEGNO
(ASIA) OR FORMICA 8846NT OILED LEGNO (US)
TOP EDGES: PVC EDGE BAND TO MATCH OILED LEGNO
DOOR: HINGED LEFT FACING SIDE
DOOR PULL: CUSTOM WITH BLACK MATTE FINISH, TENG FENG DA09-
26-BK
CABINET INTERIOR: STAINED TO MATCH EXTERIOR OF CABINET,
PREDRILLED FOR SHELF KIT WHEN USING FOR COFFEE SERVICE
INTERIOR CABINET BOTTOM PANEL: ANSONART 48846NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
DOOR PULL: RECTANGULAR CUTOUT 8"W X 1 1/2"H CENTERED AT
TOP OF DOOR
CABINET CUTOUT: AT INSIDE BACK FOR VENTILATION: 12"W X 13
3/4"H
BASE: 3"H RECESSED BASE FINISHED WITH BLACK LPL WITH CUTOUT
AT TOP FRONT FOR VENTILATION
NOTE: THIS CABINET IS USED TO HOLD A REFRIGERATOR OR USED
WITH X-202ACS SHELF KIT DEPENDENT ON ROOM TYPE
CABINET INTERIOR: 20"W X 20 13/16"D X 21 1/4"H CLEARANCE FOR
FRIDGE
FRIDGE: SIZED TO FIT ABSOCOLD ARD104AB14 FRIDGE, MI# 246798 - Room Types Where This Is Used
15"W X 18 1/8"D X 20 5/8"H Guestrooms - King Accessible Right X-202ACR
ORIENTATION: REFRIGERATOR CABINET IS INSTALLED CLOSEST TO
WINDOW WITH DESK PIN LEGS ATTACHED ON RIGHT FACING SIDE Guestrooms - King Suite Accessible Right X-202ACR
OF CABINET. DOOR IS HINGED ON WINDOW SIDE (LEFT FACING SIDE) Guestrooms - QQ Accessible Right X-202ACR
INSTALLATION: ATTACH TO PIN LEGS OF DESK IN THE FIELD,
HARDWARE TO ATTACH INCLUDED Guestrooms - QQ Suite Accessible Right X-202ACR
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: SHELF KIT FOR ACCESSIBLE COFFEE CABINET
DIMENSIONS:
BACK PANEL - 19 7/8"W X 1/4"D X 21 5/8"H
SHELF - 21 1/4"W X 18"D X 3/4"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
LAMINATE: HIGH PRESSURE LAMINATE-ANSONART 48846 NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO (US)
FRONT EDGE: PVC EDGE BAND TO MATCH FORMICA OILED LEGNO
ASSEMBLY: ATTACHES TO BACK PANEL OF CABINET TO COVER
VENTILATION HOLE WITH VELCRO STRIPS, INCLUDES 4 BRONZE
SHELF PINS
*NOTE: USED WITH CABINET IN ADA ROOMS TO HOLD COFFEE
SERVICE
**NOTE: SEALED FOR MOISTURE RESISTANCE
***NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING:
LM/CK/HR UPDATED 1/19/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: LEFT LUGGAGE BENCH W/O TOP-OILED LEGNO
OVERALL DIM: 33"W X 20"D X 23 1/2
BENCH DIM: 32 3/4"W X 19 7/8"D X 19 1/2"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: HORIZONTAL ON DRAWERS, VERTICAL ON END PANELS &
CURVE
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
ORIENTATION: CURVE ON LEFT FRONT WHEN FACING BENCH
DRAWER: TWO EACH WITH FULL EXTENSION DRAWER GLIDES
DRAWER INTERIOR: STAINED TO MATCH EXTERIOR OF BENCH
DRAWER PULL: RECTANGULAR CUTOUT 15 7/8" W X 1 1/2"H
CENTERED AT TOP OF DRAWER
METAL BACKSPLASH: 12"W X 3 1/2"H X 3/8 THICK TUBING
BACKSPLASH FINISH: BLACK POWDERCOAT TO MATCH TIGER
DRYLAC 049/80350
TOP: UNFINISHED, USED WITH SEPARATE QUARTZ TOP
BASE: 3" H RECESSED BASE FINISHED WITH BLACK LAMINATE
INSTALLATION: ATTACH BACKSPLASH AND QUARTZ TOP IN THE
FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/5/17 Room Types Where This Is Used
Guestrooms - King Accessible Left X-203L
Guestrooms - King Left X-203L
Guestrooms - QQ Accessible Left X-203L
Guestrooms - QQ Left X-203L
GLOBAL DESIGN
Specification
ITEM: RIGHT LUGGAGE BENCH W/O TOP-OILED LEGNO
OVERALL DIM: 33"W X 20"D X 23 1/2
BENCH DIM: 32 3/4"W X 19 7/8"D X 19 1/2"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: HORIZONTAL ON DRAWERS, VERTICAL ON END PANELS &
CURVE
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
ORIENTATION: CURVE ON RIGHT FRONT WHEN FACING BENCH
DRAWER: TWO EACH WITH FULL EXTENSION DRAWER GLIDES
DRAWER INTERIOR: STAINED TO MATCH EXTERIOR OF BENCH
DRAWER PULL: RECTANGULAR CUTOUT 15 7/8" W X 1 1/2"H
CENTERED AT TOP OF DRAWER
METAL BACKSPLASH: 12"W X 3 1/2"H X 3/8 THICK TUBING
BACKSPLASH FINISH: BLACK POWDERCOAT TO MATCH TIGER
DRYLAC 049/80350
TOP: UNFINISHED, USED WITH SEPARATE QUARTZ TOP
BASE: 3" H RECESSED BASE FINISHED WITH BLACK LAMINATE
INSTALLATION: ATTACH BACKSPLASH AND QUARTZ TOP IN THE
FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/5/17 Room Types Where This Is Used
Guestrooms - King Accessible Right X-203R
Guestrooms - King Right X-203R
Guestrooms - QQ Accessible Right X-203R
Guestrooms - QQ Right X-203R
GLOBAL DESIGN
Specification
ITEM: QUARTZ TOP FOR LEFT HAND LUGGAGE BENCH
PATTERN: JG EDELEN, PATTERN DOMINO EHS-414
DIM: 33"W X 20"D X 1/2" THICK, FRONT LEFT FACING CORNER WITH 5"
RADIUS
*NOTE: TOP AND EDGES POLISHED
**NOTE: USED WITH LEFT HAND LUGGAGE BENCH
CRATING: PACKED MULIPLE TOPS PER CRATE
LM/CK/HR UPDAED 1/5/17
GLOBAL DESIGN
Specification
ITEM: QUARTZ TOP FOR RIGHT HAND LUGGAGE BENCH
PATTERN: JG EDELEN, PATTERN DOMINO EHS-414
DIM: 33"W X 20"D X 1/2" THICK, FRONT RIGHT FACING CORNER WITH
5" RADIUS
*NOTE: TOP AND EDGES POLISHED
**NOTE: USED WITH RIGHT HAND LUGGAGE BENCH
CRATING: PACKED MULIPLE TOPS PER CRATE
LM/CK/HR UPDATED 1/5/17
GLOBAL DESIGN
Specification
ITEM: TV PANEL-OILED LEGNO
OVERALL DIM: 63 1/2"W X 31 1/2"H X 4"D
WINGS ON SHORT SIDES: 1"W X 2 1/2"D
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: HORIZONTAL ON PANEL, VERTICAL ON WINGS AT END OF
PANEL
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
CUT OUT FOR TV: 17"W X 6"H
POWER STRIP: NATIONAL LIGHTING TV2003-R-TR TAMPER
RESISTANT OUTLETS, 10' 14-3 POWER CORD WITH 90 DEGREE PLUG,
UL LISTED
TV SIZE: TO FIT TELEVISION UP TO 55"
INSTALLATION: MOUNTS ON WALL CLEATS, HARDWARE TO ATTACH
TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI SNAPTOGGLE
W/ 1/4"-20 BOLTS
EDGES: SEALED FOR MOISTURE RESISTANCE
*NOTE: POWER STRIP TO BE USED TO PLUG TV AND
ENTERTAINMENT BOX
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/6/17
Room Types Where This Is Used
Guestrooms - King Accessible Left X-204
Guestrooms - King Accessible Right X-204
Guestrooms - King Left X-204
Guestrooms - King Right X-204
Guestrooms - King Suite Accessible Left X-204
Guestrooms - King Suite Accessible Right X-204
Guestrooms - King Suite Left X-204
Guestrooms - King Suite Right X-204
Guestrooms - QQ Accessible Left X-204
Guestrooms - QQ Accessible Right X-204
Guestrooms - QQ Left X-204
Guestrooms - QQ Right X-204
Guestrooms - QQ Suite Accessible Left X-204
Guestrooms - QQ Suite Accessible Right X-204
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: GUESTROOM TASK CHAIR
ENTIRE PIECE MUST MEET: CA 117-2013
OVERALL DIMENSIONS: 24.5"W x 30"H x 24.5"D
AH: 23" SH: 17.75"
EXPOSED FRAME FINISH: EUROPEAN BEECH
FRAME FINISH: JLF CHOCOLATE
GLIDES: NYLON
PRIMARY FABRIC: (MI#270884)
MFR: FIL DOUX
PATTERN: COMMANDER
COLOR: PEA SOUP
FABRIC ORIENTATION: OTHER
WIDTH: 54"
REPEAT: N/A
CONTENT: 100% VINYLIFE (PVC)
DOUBLE RUBS: 200,000+
SEAM STRENGTH: 35LBS(NON-WOVENS)
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND NFPA-260, WITH TEST RESULTS
AVAILABLE UPON REQUEST.
FLEXING: 25,000 CYCLES, NO APPRECIABLE CRAZING, NO CRACKING
COATING ADHESION, 3 LBS MINIMUM
COLD CRACK, 20 DEGREES FAHRENHEIT / NO CRACKING
TOP COAT: PRO-TECH
ROLL SIZE: 40 LY
CLEANING CODE: (W)-WATER/SOAP
WARRANTED AGAINST PICKING
YARDS REQUIRED: 3 YARDS
LEAD TIME: 10 WEEKS INITIALLY
ROLLOUT: 6 WEEKS
COO: USA
CARTONING INCLUDED
NFPA-260 & TB117-2013 COMPLIANT
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: OTTOMAN BENCH
DIMENSIONS: W: 28" D: 18" SH: 18" TTL H: 20" CUSHION (H): 4" X 25
1/2"(W)
*NOTE: SIDE WOOD AT CUSHION 1"-1 1/4" (W)
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LABELLED.
DECIDUOUS HARDWOOD: YES
EXPOSED FRAME FINISH: MAPLE
COLOR: FIX WARM WALNUT
TOP COAT: POLYURETHANE
NYLON GLIDES: YES
FOAM:
TAPERED ROUND LEGS: 13 1/2" (H), 1 3/4" (TOP), 1" (BOTTOM)
*NOTE: EXPOSED HIDDEN STRETCHER - TIGHT IN BACK
UPHOLSTERY - TIGHT SEAT UPHOLSTERY WITH BOXED EDGES
PRIMARY UPHOLSTERY:
MFR: VALLEY FORGE
PATTERN: WISENT 3
COLOR: OUTLAND 131-KKS (MI#270903)
FABRIC ORIENTATION: UP THE ROLL
PATTERN TO RUN: HORIZONTAL
WIDTH: 54"
REPEAT: N/A
CONTENT: 85% PVC, 15% POLYESTER
DOUBLE RUBS:
SEAM STRENGTH: 35LBS(NON-WOVENS), 30X25LBS MIN(KNITS).
FLAMMABILITY: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND NFPA-260, WITH TEST RESULTS
AVAILABLE UPON REQUEST.
COATING ADHESION, 3 LBS MINIMUM
ROLL SIZE: 30 YDS
CLEANING CODE: (W)-WATER/SOAP
YARDAGE REQUIRED: 1.5 YDS (CHARTER 1.25 YDS)
FINISHED GOODS CONTAINING COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE
REGULATION.
CARTONING INCLUDED
KE/BMC/HR UPDATED 3/9/17 Room Types Where This Is Used
Guestrooms - QQ Accessible Left X-207
Guestrooms - QQ Accessible Right X-207
Guestrooms - QQ Left X-207
Guestrooms - QQ Right X-207
Guestrooms - QQ Suite Accessible Left X-207
Guestrooms - QQ Suite Accessible Right X-207
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: BENCH OVER PTAC UNIT
OVERALL DIM: 95 1/2"L X 8"D X 23 3/8"H TO TOP OF WINGS AT BENCH
END
WINGS: 2 1/2"H, CLEARANCE UNDER BENCH: 20 7/8"
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: HORIZONTAL ON BENCH TOP AND WING AT END OF BENCH.
VERTICAL GRAIN ON PANEL LEGS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
PANEL LEGS: TWO EACH 2 1/2"W X 6"D ATTACHED TO BENCH TOP
WITH METAL BRACKETS, INSTALLED 12" INSIDE ENDS OF BENCH
TOP: HPL ANSONART 48846NT OILED LEGNO (ASIA) OR FORMICA
8846NT OILED LEGNO
GLIDES: 2 EACH ADJUSTABLE GLIDES PER PANEL LEG
INSTALLATION: ATTACH LEGS TO TOP, SECURE BENCH TO WALL
USING METAL BRACKET AT PANEL LEG. HARDWARE TO ASSEMBLE
BENCH INLCUDED, HARDWARE TO ATTACH TO WALL TO BE
PROVIDED BY GC, RECOMMEND HILTI SNAPTOGGLE W/ 1/4"-20 BOLTS
EDGES: SEALED FOR MOISTURE RESISTANCE
*NOTE: VERFIY INSTALLED HEIGHT OF PTAC UNIT TO ENSURE BENCH
WILL FIT OVER TOP
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17 Room Types Where This Is Used
Guestrooms - King Accessible Left X-208
Guestrooms - King Accessible Right X-208
Guestrooms - King Left X-208
Guestrooms - King Right X-208
Guestrooms - King Suite Accessible Left X-208
Guestrooms - King Suite Accessible Right X-208
Guestrooms - King Suite Left X-208
Guestrooms - King Suite Right X-208
Guestrooms - QQ Accessible Left X-208
Guestrooms - QQ Accessible Right X-208
Guestrooms - QQ Left X-208
Guestrooms - QQ Right X-208
Guestrooms - QQ Suite Accessible Left X-208
Guestrooms - QQ Suite Accessible Right X-208
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED - DOUBLE - BLACK
OVERALL DIM: 53"W X 79 1/2"L X 12"H
BASE: 10 5/8" H BASE RECESSED 8" ON EACH SIDE AND END
PLATFORM EDGE: 1MM THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPS IN GRID PATTERN
USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/6/17
GLOBAL DESIGN
Specification
ITEM: 4 DRAWER 65" DRESSER FOR SUITES-OILED LEGNO-NO TOP
OVERALL DIM: 65"W X 20"D X 23 1/2"
DRESSER DIM: 64 3/4"W X 19 7/8"D X 19 1/2"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: HORIZONTAL ON DRAWERS, VERTICAL ON END PANELS &
CURVE
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
CURVE: ON FRONT OF DRESSER AT EACH CORNER
DRAWER: FOUR EACH WITH FULL EXTENSION DRAWER GLIDES
DRAWER INTERIOR: STAINED TO MATCH EXTERIOR OF DRESSER
DRAWER PULL: RECTANGULAR CUTOUT 15 3/8" W X 1 1/2"H
CENTERED AT TOP OF DRAWER
METAL BACK SPLASH: 28"W X 3 1/2"H X 3/8 THICK TUBING
BACKSPLASH FINISH: BLACK POWDERCOAT TO MATCH TIGER
DRYLAC 049/80350
TOP: UNFINISHED, USED WITH SEPARATE QUARTZ TOP
BASE: 3" H RECESSED BASE FINISHED WITH BLACK LPL
INSTALLATION: ATTACH BACKSPLASH AND QUARTZ TOP IN THE
FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/6/17 Room Types Where This Is Used
Guestrooms - King Suite Accessible Left X-216
Guestrooms - King Suite Accessible Right X-216
Guestrooms - King Suite Left X-216
Guestrooms - King Suite Right X-216
Guestrooms - QQ Suite Accessible Left X-216
Guestrooms - QQ Suite Accessible Right X-216
Guestrooms - QQ Suite Left X-216
Guestrooms - QQ Suite Right X-216
GLOBAL DESIGN
Specification
ITEM: QUARTZ TOP FOR 4 DRAWER 65" DRESSER
PATTERN: JG EDELEN, PATTERN DOMINO EHS-414
DIM: 65"W X 20"D X 1/2" THICK, FRONT FACING CORNERS WITH 5"
RADIUS
*NOTE: TOP AND EDGES POLISHED
**NOTE: USED WITH 4 DRAWER DRESSER FOR SUITES
CRATING: PACKED MULIPLE TOPS PER CRATE
LM/CK/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: END TABLE IN SUITE ROOMS
OVERALL DIM: 15 3/4"W X 24"D X 24"
WOOD SOLID FOR LEGS: POPLAR
GRAIN: VERTICAL ON PARTITION AND END PANELS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
UPPER TABLE: HIGH PRESSURE LAMINATE - ANSONART 48846NT
OILED LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO (US)
LEGS: SOLID WOOD WITH RECTANGULAR ANGLED LEGS
CONFIGURATION: 16" UPPER TOP CANTILEVERED OVER 24"D TOP
SUPPORTED WITH VERTICAL PANEL CENTERED BELOW THE 16" TOP,
6"H VERTICAL PANEL LOCATED ON OPPOSITE SHORT END OF TABLE
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/CK 3/6/17
GLOBAL DESIGN
Specification
ITEM: 42" OVAL COCKTAIL TABLE FOR SUITES-BLACK
OVERALL DIM: 42"W X 24 1/2"D X 20"H
LAMINATE: HPL-BLACK WOODGRAIN-ANSONART 3595-SV(ASIA) OR
WILSONART 1595K-28 (US
TOP: 1 1/4" THICK RACETRACK SHAPED TOP
EDGE: BLACK T-MOLD EDGE - MATTE - TO MATCH OUTWATER
PLASTICS 303-1032-BK, 1 1/4"W 1/2" THICK
LEGS: 2" DIA ANGLED METAL LEGS WITH MOUNTING BRACKETS AT
TOP TO ATTACH TO UNDERSIDE OF TABLE
LEG FINISH: BLACK POWDER COAT TO MATCH TIGER DRYLAC
049/80350
GLIDES ON LEGS: ADJUSTABLE CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD, HARDWARE TO
ASSEMBLE TABLE IS INCLUDED
EDGES: SEALED FOR MOISTURE RESISTANCE
*NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED
LM/CK/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: GUESTROOM SOFA WITH (4) PILLOWS
DIMENSIONS: TTL HEIGHT: 37 1/4" TO TOP OF PILLOWS
W: 78" TTL DEPTH: 38" TAPERED ARM HEIGHT: 23 3/4"(FRONT) 30
1/2"(BACK) SEAT HEIGHT: 18" SEAT DEPTH: 26 1/2", CUSHION HEIGHT:
9 3/4", HEIGHT W/O PILLOWS: 30 1/2" FRONT RAIL: 2"(H)
METAL LEG DIMENSIONS: 6 1/4"(H) NOTE: SCREWED ON TO BASE
FRAME. NOTE: SCREWED TO BASE OF FRAME(FLEXSTEEL)
FLAMMABILITY: MUST BE CERTIFIED TO COMPLY WITH CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LABELLED.
NON-EXPOSED FRAME: DECIDUOUS HARDWOOD
EXPOSED FRAME: METAL
COLOR: BLACK POWDERCOAT
GLIDES: YES, NYLON
*NOTE: FOAM ON (BACK) 1.0 DENSITY / 12-16 ILD; (SEAT) 2.5 DENSITY /
26-30 ILD
CONSTRUCTION DETAILS: TIGHT IN BACK UPHOLSTERY. LOOSE
REVERSIBLE SEAT CUSHION WITH WATERFALL EDGE. BLOWN ARM
UPHOLSTERY WITH SINGLE NEEDLE STITCHING.
PRIMARY UPHOLSTERY: TBD
MFR: PKAUFMANN
PATTERN: NCL ZAMBIA
COLOR: CUST SADDLE (MI#270701)
ORIENTATION: N/A
CONTENT: 55% PVC/5%POLYURETHANE/36% POLY/4% COTTON
TOP COAT FINISH: NANOCLEAN
WIDTH: 54"
REPEAT: N/A
FIRE RESISTANCE: MUST BE CERTIFIED TO PASS CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND NFPA-260, WITH TEST RESULTS
AVAILABLE UPON REQUEST.
50,000 DOUBLE RUBS, ASTM D4157, #10 COTTON DUCK
CLEANABILITY: VERY SLIGHT STAIN, MINIMUM/GOOD TO EXCELLENT
CLEANABILITY
SEAM STRENGTH: 25 LBS(WOVENS), 33 LBS MIN(NON-WOVENS) 30 X
25 LBS MIN (KNITS)
TEAR STRENGTH, 4 LBS MIN(WOVEN BACKING) 15 LBS(NON-WOVEN)
TENSILE 50 LBS
WARRANTED AGAINST PICKING
CLEANING CODE: COMBINATION (W-S) Room Types Where This Is Used
ROLL SIZE: APPROX. 50-60 YDS. Guestrooms - King Suite Accessible Left X-239
YARDAGE REQUIRED: 15.9 YDS
PILLOWS: (QTY 4) OVERSTUFFED Guestrooms - King Suite Accessible Right X-239
(2) 18" X 18" .8 YARDS
Guestrooms - King Suite Left X-239
(2) 20" X 20" 1 YARDS
YARDAGE REQUIRED: Guestrooms - King Suite Right X-239
*NOTE: FOAM LUXURY BLOWN IN FIBER (2.17 FILL WEIGHT INSERT)
**FINISHED GOOD CONTAINING COMPOSITE WOODS MUST COMPLY Guestrooms - QQ Suite Accessible Left X-239
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND Guestrooms - QQ Suite Accessible Right X-239
GLOBAL DESIGN
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE Guestrooms - QQ Suite Left X-239
REGULATION.
CARTONING INCLUDED Guestrooms - QQ Suite Right X-239
KE/BMC/HR/BMC UPDATED 3/10/17
GLOBAL DESIGN
Specification
ITEM: GUESTROOM SLEEPER SOFA WITH (4) PILLOWS
DIMENSIONS: TTL HEIGHT: 37 1/4" TO TOP OF PILLOWS, W: 78" TTL
DEPTH: 38" TAPPERED ARM HEIGHT: 23 3/4"(FRONT) 30 1/2"(BACK)
SEAT HEIGHT: 20" SEAT DEPTH: 26 1/2", CUSHION HEIGHT: 8", HEIGHT
W/O PILLOWS: 30 1/2" FRONT RAIL: 9"(H)
METAL LEG DIMENSIONS: 3"(H) NOTE: SCREWED TO BASE OF FRAME
FLAMMABILITY: MUST BE CERTIFIED TO COMPLY WITH CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LABELLED.
NON-EXPOSED FRAME: DECIDUOUS HARDWOOD
FINISH: TBD
EXPOSED FRAME: METAL
COLOR: BLACK POWDER COAT
GLIDES: YES, NYLON
SOFA BED MECHANISM: LEGGETT & PLATT CLASSIC 3500 W/ANTI-TILT
MECHANISM
MATTRESS/INNERSPRING: MUST MEET OR EXCEED-5" THICK
MATTRESS/230 COILS FOR 36" & 40"/253 COILS FOR 48"/299 COILS
FOR 52"/345 COILS FOR 60"/2 OZ SYNTHETIC PAD/0.5" FOAM QUILTING
MATTRESS SIZE: FULL SIZE MATTRESS
CONSTRUCTION DETAILS: TIGHT IN BACK UPHOLSTERY. LOOSE
REVERSIBLE SEAT CUSHION WITH WATERFALL EDGE. BLOWN ARM
UPHOLSTERY WITH SINGLE NEEDLE STITCHING.
*NOTE: FOAM ON (BACK) 1.0 DENSITY 12-16 ILD, (SEAT) 2.5 DENSITY
26-30 ILD
PRIMARY UPHOLSTERY:
MFR: PKAUFMANN
PATTERN: NCL ZAMBIA
COLOR: CUST SADDLE (MI#270701)
YARDAGE REQUIRED: 15.9 YDS
PILLOWS: (QTY 4) OVERSTUFFED W/ HIDDEN ZIPPERS & SINGLE
NEEDLE STITCHING
(2) 18" X 18" - .8 YDS
(2) 20" X 20" - 1 YD
*NOTE: FOAM LUXURY BLOWN IN FIBER (2.17 FILL WEIGHT INSERT)
**FINISHED GOOD CONTAINING COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE
REGULATION.
CARTONING INCLUDED Room Types Where This Is Used
KE/BMC/HR/BMC UPDATED 3/10/17 Guestrooms Alternate - Guestroom X-239ALT
Alternates Guestroom Alternates
GLOBAL DESIGN
Specification
DESCRIPTION: ADA LEFT 38" REFRIGERATOR MICROWAVE CLOSET
UNIT
OVERALL DIMENSIONS: 38"W X 34"D X 85"H
MICROWAVE CAVITY: 20 1/2"W X 17 1/8"D X 19 1/2"H
REFRIGERATOR CAVITY: 19"W X 21 1/2"D X 23 3/8"H - FITS
REFRIGERATOR SIZED 18 1/2"W X 19"D X 22 3/8"H
UPPER CAVITY: 20 1/2"W X 15 1/2"D X 11 3/4"H
MID CAVITY: 20 1/2"W X 15 1/2"D X 12 1/2"H
WOOD SOLIDS: POPLAR
FINISH: MODOFIED POLYURETHANE
STAIN COLOR: TO MATCH ANSONART 48846NT OILED LEGNO,
KIMBALL KH-22084C
SHEEN LEVEL: 10 +/- 5
LAMINATE ON SHELVES, SURFACES AND FACING EDGES: ANSONART
48846NT OILED LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
(US)
LAMINATE ON KICK BASE: WILSONART 1595-60 BLACK
VENEER: KIMBALL: VICWOOD AMERICAN WALNUT #2C
SHELVES:
MID SHELF: 20 1/2"W X 15 1/2"D X 2 1/2"H
MICROWAVE SHELF: 20 1/2"W X 17 1/8"D X 1 9/16"H
UPPER SHELF: 20 1/2"W X 15 1/2"D X 3/4"H
CLOSET SHELF: 16"W X 24"D X 1 1/2"H LOCATED 48" ABOVE FLOOR
CORD ACCESS:
MICROWAVE: 9"W X 6"H REMOVABLE ACCESS PANEL ATTACHED
W/VELCRO AT SIDE
REFRIGERATOR: 12" X 12" CUT OUT AT SIDE
DOORS: 17 1/2"W X 3/4"D X 77"H (2 EACH)
DOOR SWING: 120 DEGREES
DOOR PULL: CUSTOM W/MATTE BLACK FINISH - TENG FENG, DA09-2-6
BK
GLIDES: 4 ADJUSTABLE LEVELING GLIDES (1 AT EACH CORNER)
BOTTOM PANEL EDGE: 2MM PVC EDGEBANDING - TO MATCH
FORMICA OILED LEGNO
BASE: RECESS: 1.5" / HEIGHT: 4"
HARDWARE:
-CLOTHES ROD: FENG SHENG EH0160; 1" DIA ROD W/FLANGES;
POLISHED CHROME FINISH (OR EQUAL)MOUNT @ 45 1/4"H ABOVE
FLOOR Room Types Where This Is Used
-IRON HOLDER: ROYAL PACIFIC CORP #10-200 WHITE (OR EQUAL) - Guestrooms - King Accessible Left X-270LADA
LOCATED IN CLOSET PORTION
-IRONING BOARD HOOK: AMERICAN HOTEL REGISTER D7B1201531 Guestrooms - King Accessible Right X-270LADA
(OR EQUAL)
Guestrooms - King Suite Accessible Left X-270LADA
LIGHT UNDER SHELF: KIMBALL PILOT - DTF-LED-12, 12" LED UNDER
CABINET LIGHT, SOLID COMFORT - FURNLITE FC-3500-LED Guestrooms - QQ Accessible Right X-270LADA
UPLIGHT: OPTIONAL FURNLITE - FC-3580 LED - WARM WHITE - X-
270LOPT Guestrooms - QQ Suite Accessible Right X-270LADA
*NOTE: UNIT MUST BE ASSEMBLED BY INSTALLER WITH FACTORY
SUPPLIED HARDWARE. 7 INDIVIDUAL COMPNENTS SHIPPED IN 4
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: OPTIONAL CLOSET LIGHT
SOURCE: FURNLITE FC-3580 LED
LAMP: LED - WARM WHITE
DIMENSIONS: 22 7/8"W X 1"D X 1 5/16"H
MOUNTING CLIPS: 2 EACH INCLUDED
CORD: 10'
UL LISTED
LM/HR
GLOBAL DESIGN
Specification
DESCRIPTION: ADA RIGHT 38" REFRIGERATOR MICROWAVE CLOSET
UNIT
OVERALL DIMENSIONS: 38"W X 34"D X 85"H
MICROWAVE CAVITY: 20 1/2"W X 17 1/8"D X 19 1/2"H
REFRIGERATOR CAVITY: 19"W X 21 1/2"D X 23 3/8"H - FITS
REFRIGERATOR SIZED 18 1/2"W X 19"D X 22 3/8"H
UPPER CAVITY: 20 1/2"W X 15 1/2"D X 11 3/4"H
MID CAVITY: 20 1/2"W X 15 1/2"D X 12 1/2"H
WOOD SOLIDS: POPLAR
FINISH: MODIFIED POLYURETHANE
STAIN COLOR: TO MATCH ANSONART 48846NT OILED LEGNO,
KIMBALL KH-22084C
SHEEN LEVEL: 10 +/- 5
LAMINATE ON SHELVES, SURFACES AND FACING EDGES: ANSONART
48846NT OILED LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
(US)
LAMINATE ON KICK BASE: WILSONART 1595-60 BLACK
VENEER: KIMBALL: VICWOOD AMERICAN WALNUT #2C
SHELVES:
MICROWAVE SHELF: 20 1/2"W X 17 1/8"D X 1 9/16"H
UPPER SHELF: 20 1/2"W X 15 1/2"D X 3/4"H
CLOSET SHELF: 16"W X 24"D X 1 1/2"H LOCATED 48" ABOVE FLOOR
MID SHELF: 20 1/2"W X 15 1/2"D X 2 1/2"H
CORD ACCESS:
MICROWAVE: 9"W X 6"H REMOVABLE ACCESS PANEL ATTACHED
W/VELCRO AT SIDE
REFRIGERATOR: 12" X 12" CUT OUT AT SIDE
DOORS: 17 1/2"W X 3/4"D X 77 (2 EACH)
DOOR SWING: 120 DEGREES
DOOR PULL: CUSTOM W/MATTE BLACK FINISH - TENG FENG, DA09-2-6
BK
BOTTOM PANEL EDGE: 2MM PVC EDGEBANDING - TO MATCH
FORMICA OILED LEGNO
GLIDES: 4 ADJUSTABLE LEVELING GLIDES (1 AT EACH CORNER)
BASE: RECESS: 1.5" / HEIGHT: 4"
HARDWARE:
-CLOTHES ROD: FENG SHENG EH0160; 1" DIA ROD W/FLANGES;
POLISHED CHROME FINISH (OR EQUAL)-MOUNT @ 45 1/4"H ABOVE
FLOOR Room Types Where This Is Used
-IRON HOLDER: ROYAL PACIFIC CORP #10-200 WHITE (OR EQUAL) - Guestrooms - King Accessible Left X-270RADA
LOCATED IN CLOSET PORTION
-IRONING BOARD HOOK: AMERICAN HOTEL REGISTER D7B1201531 Guestrooms - King Accessible Right X-270RADA
(OR EQUAL)
Guestrooms - King Suite Accessible Right X-270RADA
LIGHT UNDER SHELF: KIMBALL PILOT - DTF-LED-12, 12" LED UNDER
CABINET LIGHT, SOLID COMFORT - FURNLITE FC-3500-LED Guestrooms - QQ Accessible Left X-270RADA
UPLIGHT: OPTIONAL - FURNLITE - FC-3580 LED - WARM WHITE - X-
270LOPT Guestrooms - QQ Suite Accessible Left X-270RADA
*NOTE: UNIT MUST BE ASSEMBLED BY INSTALLER WITH FACTORY
SUPPLIED HARDWARE. 7 INDIVIDUAL COMPONENTS SHIPPED IN 4
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: TOUCH UP KIT FOR MODERN CALM CASEGOODS
SOURCE: TOUCH UP SOLUTIONS
CONTENTS: FILL STICK # 0653-3021-S104
MARKER #0963-Y090-0010
LM/CK 3/1/17
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 7
INCANDESCENT WATTAGE EQUIVALENT: 40
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 3000K, 4.4" LENGTH, 2.4" DIAMETER, 475
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: ANTIQUE STYLE ACADEMY CLIP-ON DESK LAMP
WITH FLEXIBLE NECK.
MODEL NUMBER: 73340001ABRSTR
MODEL NAME: ACADEMY TASK CLIP LAMP
OVERALL DIMENSIONS: ADJUSTABLE TO 12" H X 15" D X 5 9/16" W
CLIP DIMENSIONS: 2 3/16" H X 3 1/4" W X 4 1/2" D, PADDED TO
PROTECT DESK SURFACE
ADJUSTABLE NECK DIMENSIONS: 14" L X 1/2" ROUND TUBING
SHADE DIMENSIONS: 3 1/16" H X 7 7/8" D X 5 9/16" W
MATERIAL AND FINISH COLOR: STEEL, PAINTED ANTIQUE BRASS
SWITCH TYPE: ON/OFF ROCKER SWITCH LOCATED ON CORD, 12"
FROM BACK OF FIXTURE.
CORD LENGTH: 8' CLEAR CORD WITH 3-PRONG GOUNDED PLUG
SCOKET BASE TYPE: MEDIUM BASE, E-26
BULB INCLUDED: NO
TYPE: 7 WATT LED, 3000K, TCP# LED7A19D30K(MI#271215)
QUANTITY: 1
MAXIMUM WATTAGE: 40 WATT
SHADE: PART OF FIXTURE- SEE BELOW
SHAPE: HALF DOME
DIMENSIONS: 3 1/16" H X 7 7/8" D X 5 9/16" W
MATERIAL AND FINISH COLOR: STEEL, PAINTED ANTIQUE BRASS
LISTING: UL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC UPDATED 3/2/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: FLOOR LAMP WITH ROUND TAPERED DRUM
SHADE FOR GUESTROOM
OVERALL DIMENSIONS: 64" H X 18" W
BASE DIMENSIONS: 13" DIA X 1" H
VERTICAL STEM DIMENSIONS: 1.25" ROUND TUBING X 49" H
COLUMN FOR ON/OFF SWITCH DIMENSIONS: 2" ROUND TUBING X 4" H
MATERIAL AND FINISH COLOR: POWDER COAT BASE WITH PAINTED
ANTIQUE BRASS FINISH, STEEL
PROTECTIVE COATING: YES, LACQUER
SOCKET BASE TYPE: MEDIUM E26
BULB INCLUDED: NO
TYPE: 15 WATT LED, 3000K, TCP #LED15A2130K(MI#271211)
QUANTITY: 1
MAXIMUM WATTAGE: 42 WATTS
VOLTAGE: 120
SWITCH TYPE: BLACK ROCKER SWITCH LOCATED ON VERTICAL
STEM, 48" FROM FLOOR
CORD: 8' GOLD CORD WITH 2-PRONG PLUG, EXITS BACK OF BASE
HARP SIZE: 9"
FINIAL SIZE: 1" DIA X .5" H
SHADE: PROVIDED BY SUPPLIER, SEE BELOW
SHAPE: TAPERED DRUM
DIMENSIONS: 18" BOTTOM DIA. X 14.5" TOP DIA. X 15" SLANT
MATERIAL AND COLOR: TC LINEN (BEIGE) ON HARDBACK
SELF FOLD, NO TRIM
DIFFUSERS: NO
LISTING: UL AND CUL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC/HR UPDATED 1/17/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A21 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 15
INCANDESCENT WATTAGE EQUIVALENT: 100
VOLTAGE: 120
DIMMABLE: NO
OTHER: A21 SHAPE, 3000K, 4.9" LENGTH, 2.6" DIAMETER, 1,625
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC UPDATED 1/12/17
GLOBAL DESIGN
Specification
ITEM: 22" x 68" FULL LENGHT MIRROR
PRODUCT: NON BEVELLED MIRROR
OVERALL DIMENSIONS: 22"W x 68"H x 1/2"D
FRAME MFR: PI FINE ART
FRAME SIZE: 7/8"W
FRAME MATERIAL: METAL
FRAME COLOR: ANTIQUED BRASS
FRAME MODEL NO:
GLASS: MIRROR
GLASS SIZE: 18 1/4"W x 65 1/4"H
TEMPERED GLASS: YES
BEVEL: N/A
MOUNTING: VERTICAL
HANGING METHOD: 3 POINT SECURITY HARDWARE TO BE INCLUDED
NOTE: MFR TO CLEARLY MARK EACH MIRROR WITH ITEM ID AND
REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE.
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: GUESTROOM HEADBOARD SCONCE WITH SCHOOLHOUSE
STYLE ROUND ACRYLIC LAMP SHADE (PLUG-IN FIXTURE).
OVERALL DIMENSIONS: H: 24" W: 12" D: 14"
BACK PLATE DIMENSIONS: 24"H X 1.13"W X 1.13"D
HORIZONTAL SHADE SUPPORT ARM DIMENSIONS: PROTRUDES 7.5"
HORIZONTALLY TO A FIXED DECORATIVE ROUND KNUCKLE JOINT, 3"
DOWN FROM TOP OF BACK PLATE, AND ANGLES DOWN VERTICALLY
7.5". 3/4" ROUND TUBING ON HORIZONTAL SUPPORT ARM. 1/2"
ROUND TUBING ON VERTICAL SUPPORT ARM.
SOCKET CAP DIMENSIONS: 4.5" DIA X 1" H
BODY MATERIAL AND COLOR: POWDER COAT BASE WITH PAINTED
ANTIQUE BRASS FINISH, STEEL
SOCKET BASE TYPE: MEDIUM BASE, E26
BULB INCLUDED: NO
TYPE: 10 WATT LED, 3000K, TCP #LED10A19D30K(MI#254785)
QUANTITY: 1
MAXIMUM WATTAGE: 60 WATTS
SWITCH TYPE: RECTANGULAR ON/OFF BLACK ROCKER
SWITCH LOCATION: ON UNDERSIDE OF BACK PLATE
VOLTAGE: 120
CORD: 10' CLEAR SPT-2-PRONG PLUG (EXITS THROUGH BACK BACK
PLATE, 6" UP FROM BOTTOM).
SHADE PROVIDED BY VENDOR: YES: SEE BELOW-
SHADE SHAPE: ROUND, DECORATIVE SCHOOL HOUSE DESIGN
SHADE DIMENSIONS: 10.12" H X 12" DIA
MATERIAL: ACRYLIC
COLOR: GLOSSY WHITE
SHADE ATTACHMENT: A PLASTIC UNO FITTER RING IS INSERTED
INSIDE THE SHADE WHICH ATTACHES TO THE THREADED SOCKET
CUP AND IS TIGHTENED DOWN SECURING THE SHADE.
DIFFUSER: NO
UL & CUL APPROVED AND LABELED
CARTONING INCLUDED
CG/BMC/HR UPDATED 1/17/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: MEDIUM BASE LED A19 LAMP
TYPE: MEDIUM E26 BASE LED
WATTS: 10
INCANDESCENT WATTAGE EQUIVALENT: 60
VOLTAGE: 120
DIMMABLE: YES
OTHER: A19 SHAPE, 3000K, 4.4" LENGTH, 2.4" DIAMETER, 825
LUMENS, 82 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/BMC
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: LED CEILING FIXTURE FOR GUEST BATHROOM
MODEL NUMBER: P8222-28/30K9-AC1-L10
OVERALL DIMENSIONS: DIA: 7.5" X H: 1.21"
BODY MATERIAL AND COLOR: WHITE POWDER COAT FINISH IN DIE-
CAST ALUMINUM WITH DIFFUSED POLYCARBONET LENS
SOCKET BASE TYPE: INTEGRATED LED
BULB INCLUDED: YES
TYPE: INTEGRATED LED PANEL, 17 WATT, 1,032 LUMENS, 3000K, CRI:
90, 60,000 HOUR LIFE, ENERGY STAR QUALIFIED
QUANTITY: 1
MAXIMUM WATTAGE: 17
VOLTAGE: 120
SWITCH TYPE: HARDWIRED
OTHER: WET RATED, SIMPLE SNAP IN INSTALLATION TO EXISTING J-
BOX
WEIGHT: 2 LBS
CSA RATED (CANADA AND US)
CARTONING INCLUDED
CG/BMC UPDATED 1/5/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: GUEST ENTRY CEILING FIXTURE WITH GLASS
LENS
MODEL NUMBER: 70030733ABRSTR
MODEL NAME: TURNER FLUSHMOUNT
OVERALL DIMENSIONS: 12" DIA X 4.5" H
MATERIAL AND FINISH COLOR: SOLID BRASS CAST, ANTIQUE BRASS
SWITCH TYPE: HARDWIRED
SOCKET BASE TYPE: (2) E12 CANDELABRA SOCKETS
BULB INCLUDED: NO
TYPE: 5 WATT LED, 3000K, TCP #LED5E12B1130K (MI#271266)
QUANTITY: 2
MAXIMUM WATTAGE: 60 WATTS
VOLTAGE: 120
LENS: FROSTED WHITE GLASS
RELAMPING: THE LENS COVER IS ON A HINGE AND IS OPENED BY
SET SCREW ON SIDE OF FRAME
LISTING: UL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC UPDATED 3/2/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: ELITE SERIES CANDELABRA BASE LED, CLEAR WITH BLUNT TIP
BASE TYPE: CANDELABRA E12
WATTS: 5
INCANDESCENT WATTAGE EQUIVALENT: 40
VOLTAGE: 120
DIMMABLE: YES
OTHER: CA11 SHAPE, 3000K, 3.8" LENGTH, 1.4" DIAMETER, 375
LUMENS, 80 CRI, RAL HOURS 25,000
UL LISTED AND APPROVED.
CG/CK 12/30/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: WALL SCONCE WITH 1/2" THICK ALUMINUM
FRAME WITH MILK GLASS PANELS ON FRONT AND SIDES, FOR SUITE
ROOMS
MODEL NUMBER: 70030732ABRSTR
MODEL NAME: UNION FILAMENT MILK GLASS NARROW TALL SCONCE
OVERALL DIMENSIONS: 17.5" H X 3.5" W X 4" D
BACKPLATE DIMENSIONS: 4.5" H X 3.5" W X .5" D
MATERIAL AND FINISH COLOR: ALUMINUM FRAME, PAINTED ANTIQUE
BRASS FINISH WITH MILK GLASS PANELS ON SIDES AND FRONT
GLASS PANEL DIMENSIONS: 16.5" H X 2.5" W ON FACE; 16.5" H X 3" W
ON SIDES
SWITCH TYPE: HARDWIRED
SOCKET BASE TYPE: MEDIUM BASE E26
BULB INCLUDED: NO
TYPE:9 WATT LED, 2700K, 800 LUMENS, GRAINGER ORDER #49ZC14
(MI#260267)
QUANTITY: 1
MAXIMUM WATTAGE: 40 WATTS
VOLTAGE: 120
LISTING: UL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC UPDATED 3/2/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: GE "BRIGHT STIK" MEDIUM BASE LED LAMP, SLENDER TUBE
SHAPE, SOLD IN A 3 PACK
GRAINGER ITEM: 49ZC14
GE ITEM # LED9LS3/827
TYPE: SELF BALLASTED SCREW IN
SHAPE: TUBE/CYLINDER
BASE: MEDIUM E26
WATTS: 9 W
INCANDESCENT WATTAGE EQUIVALENT: 60 W
VOLTAGE: 120V
DIMMABLE: NO
OTHER: TUBE SHAPE, 4.45" LENGTH, 80 CRI, INITIAL LUMENS 800,
COLOR SOFT WHITE, 2700K, SEMI-OMNI DIRECTIONAL, RAL HOURS
15,000.
SPECIAL NOTE: BULBS ARE SOLD AS A 3 PACK
CASE QTY.: 48
PACK QTY. 3
CARTONING INCLUDED
CG/BMC UPDATED 10/24/16
GLOBAL DESIGN
Specification
ITEM: HEADBOARD MOUNTED LED READING LIGHT W/ PIVOTING
HEAD (PLUG-IN).
OVERALL DIMENSIONS: H: 4" W: 2" MAX PROJECTION: 7"
ROUND BACK PLATE DIMENSIONS: DIA: 2" X D: .88"
LED PIVOTING HEAD DIMENSIONS: DIA: 1" L: 4"; CYLINDER SHAPE
BODY MATERIAL: STEEL
FINISH COLOR: POWDER COAT BASE WITH PAINTED ANTIQUE BRASS
FINISH, STEEL.
PROTECTIVE COATING: YES, LACQUER
SOCKET TYPE: N/A, INTEGRATED LED
VOLTS: 120
BULB INCLUDED: YES, INTEGRATED 3 WATT LED, 3000K
MAXIMUM WATTAGE: 3 WATT
SWITCH: (1) BLACK RECTANGLE MINI ROCKER SWITCH
LOCATION: ON FRONT OF BACK PLATE
CORD: BLACK, 10' 2-PRONG PLUG IN TRANSFORMER WITH QUICK
DISCONNECT (EXITS THROUGH CENTER REAR OF MOUNTING PLATE)
BALLAST INCLUDED: YES, ELECTRONIC PLUG IN
SPECIAL DETAIL: LED HEAD PIVOTS UP AND DOWN, LEFT AND RIGHT
NOTE: UL & CUL RATED
CARTONING INCLUDED
CG/BMC/HR/BMC UPDATED 2/10/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: CORRIDOR WALL SCONCE WITH CYLINDER
SHAPED ACRYLIC SHADES ON TOP AND BOTTOM OF CENTRALLY
LOCATED BACK PLATE
OVERALL DIMENSIONS: 28" H X 4.5" W X 4" D
BACKPLATE DIMENSIONS: 9" H X 4.5" W X 5/8" D
CENTRAL SHADE CONNECTION MOUNT: 5 3/8" H X 3" DIA
MATERIAL AND FINISH COLOR: PLATED ANTIQUE BRASS
SWITCH TYPE: HARDWIRED
SOCKET BASE TYPE: (2) INTEGRATED LED PANELS. EACH PANEL IS 8
WATTS, 670 LUMENS (1,340 TOTAL), 3000K COLOR TEMP.
BULB INCLUDED: YES
QUANTITY: 2
MAXIMUM WATTAGE: 16 WATTS
VOLTAGE: 120
SHADES: (2) PROVIDED WITH FIXTURE, SEE BELOW:
SHAPE: CYLINDER
SIZE: (2) AT 2.75" DIA X 11.5" H
MATERIAL AND COLOR: FROSTED WHITE ACRYLIC WITH
DECORATIVE METAL MESH DIFFUSER END CAPS
SHADE ATTACHMENT: EACH SHADE SCREWS INTO CENTRALLY
LOCATED SHADE CONNECTION MOUNT.
LISTING: UL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC/HR UPDATED 1/17/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: ARTWORK
IMAGE TITLE: SUITE ROOM ABOVE SOFA
ARTIST NAME: PROPRIETARY IMAGE OWNED BY MARRIOTT, MAY
NOT BE USED IN ANY OTHER BRAND
IMAGE SIZE:
OVERALL FRAMED DIMENSIONS: 48"W x 24"H
FRAME MFR: DECKLED EDGE PRINT FLOAT MOUNTED IN GLASS
FRAME SIZE:
FRAME MATERIAL: WEATHERED WOOD LOOK - PIF88
MOUNTING: HORIZONTAL WITH BLACK METAL STAND-OFFS
BACKING: MASONITE BACKING
HANGING METHOD: SECURITY HARDWARE
NOTE: MFR TO CLEARLY MARK EACH PIECE OF ART WITH ITEM ID
AND REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE WITH EACH PIECE OF ART
CARTONING INCLUDED
FA/FA/CM 3/1/2017
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM DESCRIPTION: ROUND VANITY MIRROR WITH FLANKING
ATTACHED LED SCONCES
OVERALL DIMENSIONS: 37.5" H X 44" W X 2" D
BACK PLATE DIMENSIONS: 2" H X 44" L X 1 1/8" D
MIRROR DIMENSIONS: 37.5" DIA X 1" D; METAL FRAME 1/2"
SCONCE DIMENSIONS: (2) AT 22" H X 1 1/4" W X 1 1/4" D
MATERIAL AND FINISH COLOR: PAINTED ANTIQUE BRASS (SCOTT
LAMP FINISH # 9600-B), STEEL
PROTECTIVE COATING: YES, LACQUER
SOCKET BASE TYPE: INTEGRATED LED
BULB INCLUDED: YES
BULB TYPE: EACH SCONCE HAS AN INTEGRATED LED STRIP, 17
WATT, 3000K, 2,000 LUMEN EACH.
QUANTITY: 2
MAXIMUM WATTAGE: 34 WATTS
VOLTAGE: 120
SWITCH TYPE: HARDWIRED
SPECIAL NOTE: LED SCONCES ARE ATTACHED TO ONE LONG THIN
BACK PLATE WITH CENTRALLY LOCATED ELECTRICAL BOX. ROUND
MIRROR ATTACHES TO BACK PLATE AFTER ELECTRICAL
CONNECTIONS HAVE BEEN MADE.
LISTING: UL AND CUL LISTED AND APPROVED
CARTONING INCLUDED
CG/BMC UPDATED 3/3/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: 40" x 40" MIRROR
PRODUCT: NON BEVELLED MIRROR
OVERALL DIMENSIONS: 40"W x 40"H x 1/2"D
FRAME MFR: PI FINE ART
FRAME SIZE: 7/8"W
FRAME MATERIAL: METAL
FRAME COLOR: ANTIQUED BRASS
FRAME MODEL NO:
GLASS: MIRROR
GLASS SIZE: 37 1/4"W x 37 1/4"H
TEMPERED GLASS: YES
BEVEL: N/A
MOUNTING: SQUARE
HANGING METHOD: 3 POINT SECURITY HARDWARE TO BE INCLUDED
NOTE: MFR TO CLEARLY MARK EACH MIRROR WITH ITEM ID AND
REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE.
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: 55" LED FLAT PANEL HD, NON PRO: IDIOM, NO B LAN
COLOR: BLACK
SCREEN SIZE: 54.64" DIAGONAL
DIMENSIONS:
WITH STAND: W: 48.9" H: 30.7" D: 12.8"
WITHOUT: W: 48.9" H: 28.5" D: 2.2"
BASE: (+/- 20/45/90) DEGREE ALL METAL SWIVEL
BRIGHTNESS: 300 CD/M2
RESOLUTION: 1920 X 1080 FHD
DYNAMIC CONTRAST RATIO: 1,000,000: 1
STATIC (PANEL) CONTRAST RATIO: 1,200:1
SPEAKERS: BUILT IN, 10 WATTS EACH, 20 TOTAL
FRAME RATE: 60HZ
TRIPLE XD ENGINE
PICTURE MODE: 8 MODES
ASPECT RATIO: 6 MODES
AUDIO OUTPUT: 10W + 10W
SPEAKER SYSTE: 2.0 CH
SOUND MODE: 6 MODES
VIRTUAL SURROUND/MHL/USB CLONING/IR OUT
USB AUTO PLAY BACK: YES
MOVING PICTURE PLAYBACK: DIV X HD (SD/HD/PLUS HD)
RJP COMPATIBILITY: YES (RS232C, HDMI-CEC)
COMMERICAL 1 POLE STAND
HDMI IN: 1 SIDE
USB 2.0: 1 SIDE
RF IN: 1 REAR
AV IN: 1 REAR Room Types Where This Is Used
RS-232C (DSUB 9PIN): 1 Guestrooms - King Accessible Left X-600
HDMI IN: 1 REAR
EXTERNAL SPEAKER OUT: 1 REAR Guestrooms - King Accessible Right X-600
VESA STANDARD MOUNT INTERFACE: 300MM X 300MM Guestrooms - King Left X-600
SAFETY: CUL, UL, FCC, NOM
ENERGY STAR 6.1 Guestrooms - King Right X-600
POWER SOURCE: 100 ~ 240V, 50/60HZ Guestrooms - King Suite Accessible Left X-600
WATTS: 53.6W
WARRANTY: PARTS AND LABOR: 3 YRS Guestrooms - King Suite Accessible Right X-600
CARTONING INCLUDED Guestrooms - King Suite Left X-600
BV/CK 7/6/15
Guestrooms - King Suite Right X-600
Guestrooms - QQ Accessible Left X-600
Guestrooms - QQ Accessible Right X-600
Guestrooms - QQ Left X-600
Guestrooms - QQ Right X-600
Guestrooms - QQ Suite Accessible Left X-600
Guestrooms - QQ Suite Accessible Right X-600
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: WALL MOUNTING BRACKET
DESCRIPTION: TV WALL MOUNT FOR LED AND LCD TV'S 37" TO 75"
MODEL: SF650 - FLAT MOUNT
COLOR: BLACK
UNIVERSAL BRACKETS
DIMENSIONS: 30.87"W X 16.89"H X 1.25"D
BV/CK
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: WALL MOUNT
DESCRIPTION: TV PIVOT WALL MOUNT FOR 32" TO 55" LG LED TV'S
WITH 200MM UP TO 400MM VESA PATTERNS
MODEL: HPF650
WALL PLATE: 20.65"W X 6.94"H X 2.32"D
RAILS/ARMS: 15.75"W X 15.75"H X .50"D
TOTAL UNIT DEPTH: 2.84"
COLOR: BLACK
MAX LOAD OF 60 POUNDS
BV/CK 1/23/15
GLOBAL DESIGN
Specification
DESCRIPTION: REFRIGERATOR W/CUSTOM
UNIT CONTROL
CATALOG NUMBER: ARD204AB14
DIMENSIONS: 22 3/8" H X 18.5" W X 19" D
POWER SUPPLY: 15 AMP SUPPLY REQUIRED 20 AMP PREFERRED
115V., 60HZ
CAPACITY: 2.0 CU FT
FEATURES: QUICK CHILL ( 2 HRS.) - SNOOZE CONTROL (8 HRS.)
AUTOMATIC DEFROST: YES
DISPENSER: 5 CAN ON DOOR
DOOR SWING: REVERSIBLE
UL LISTING: YES
COOLING SYSTEM: COMPRESSOR
COLOR: BLACK ON BLACK
NOTE: COOLS TO 38 DEGREES
ENERGY STAR QUALIFIED: TIER 1
ENVIRONMENTALLY SAFE: NON FLAMMABLE R134A REFRIGERANT.
NON FLAMMABLE FOAMING AGENT 245F
BV/CK 9/22/14
GLOBAL DESIGN
GLOBAL DESIGN
Specification
SUBCOMPACT MICROWAVE OVEN-.09 CF CAPACITY
900 WATTS(IEC-705 TEST PROCEDURE)
ELECTRICAL: 115 VOLTS-60 HZ - AC: 15 AMPS
COLOR - BLACK ON BLACK
10 POWER LEVELS
TURNTABLE: GLASS
TIME COOK: AUTO COOK TOUCH PADS
DIMENSIONS: 18 3/8" W X 11" H X 14 3/8" D
DEFROST: AUTO AND QUICK
CLOCK & TIMER
MANUFACTURED AND UL LISTED BY DAEWOO
MODEL KOR-9GIB
BV/CK UPDATED 11/27/12
GLOBAL DESIGN
Specification
SUBCOMPACT MICROWAVE OVEN-.09 CF CAPACITY
900 WATTS(IEC-705 TEST PROCEDURE)
ELECTRICAL: 115 VOLTS-60 HZ - AC: 15 AMPS
COLOR - BLACK ON BLACK
10 POWER LEVELS
TURNTABLE: GLASS
TIME COOK: AUTO COOK TOUCH PADS
DIMENSIONS: 18 3/8" W X 11" H X 14 3/8" D
DEFROST: AUTO AND QUICK
CLOCK & TIMER
MANUFACTURED AND UL LISTED BY DAEWOO
MODEL KOR-9GIB
BV/CK UPDATED 11/27/12
GLOBAL DESIGN
Specification
ITEM: SHOWER CURTAIN AND LINER
**NOTE: PRODUCED BY FOCUS PRODUCTS GROUP LLC**
FOCUS PRODUCTS GROUP: ITEM ID: #HBH52MFC01
CURTAIN SIZE: W: 71" H: 74"
PATTERN: CUSTOM 3D WAFFLE
COLOR: WHITE
CONTENT: 100% POLYESTER
FINISH: WATER REPELLENCY
HEADER: 4.5" H REINFORCED HEADER
HEMS: SIDE HEMS: 0.5" DOUBLE FOLDED; 1" BOTTOM HEM
GROMMET TYPE: RING
GROMMETS QTY: 10
FABRIC YARDAGE: 2.25 YDS
INCLUDES LINER: (MI#261322)
DIMENSIONS: 59" X 70"
PATTERN: PLAINWEAVE
COLOR: WHITE
POLYESTER YARN SIZE: 150D X 150D
POLYESTER FABRIC WIDTH: 74"
REPEAT: N/A
FINISH: WATER REPELLENCY
CURTAIN SIZE: H: 59" X W: 70"
FABRIC YARDAGE: 1.75 YDS
GROMMETS: PLASTIC SNAPS
TOTAL GROMMETS: 12
CASE PACK: 12
**MUST PURCHASE LINERS IN INCREMENTS OF 12**
**FREE FREIGHT ON ORDERS THAT TOTAL OVER $350**
CARTONING INCLUDED
AS/BMC UPDATED 1/24/17
GLOBAL DESIGN
GLOBAL DESIGN
Specification
ITEM: SHOWER CURTAIN AND LINER-ADA
**NOTE: PRODUCED BY FOCUS PRODUCTS GROUP LLC**
FOCUS PRODUCTS GROUP: ITEM ID: HBH52MFC01L
CURTAIN SIZE: W: 71" H: 80"
PATTERN: CUSTOM 3D WAFFLE
COLOR: WHITE
FABRIC ORIENTATION: UP THE ROLL
CONTENT: 100% POLYESTER
FINISH: WATER REPELLENCY
HEADER: 4.5" H REINFORCED HEADER
HEMS: SIDE HEMS: 0.5" DOUBLE FOLDED; 1" BOTTOM HEM
GROMMET TYPE: RING
GROMMETS QTY: 10
FABRIC YARDAGE: 2.5 YDS
DIMENSIONS: 59" X 70"
INCLUDES LINER: (MI#261312)
PATTERN: PLAINWEAVE
COLOR: WHITE
POLYESTER YARN SIZE: 150D X 150D
POLYESTER FABRIC WIDTH: 74"
REPEAT: N/A
FINISH: WATER REPELLENCY
CURTAIN SIZE: H: 65" X W: 70"
FABRIC YARDAGE: 1.75 YDS
GROMMETS: PLASTIC SNAPS
TOTAL GROMMETS: 12
CASE PACK: 6
**MUST PURCHASE LINERS IN INCREMENTS OF 6**
**FREE FREIGHT ON ORDERS THAT TOTAL OVER $350**
CARTONING INCLUDED
AS/BMC UPDATED 11/2/16
GLOBAL DESIGN
GLOBAL DESIGN
Alternate Items
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED - 72" KING - BLACK - FOR ACCESSIBLE ROOMS
OVERALL DIM: 71"W X 79 1/2"L X 12"H
BASE: 10 5/8"H BASE RECESSED 8" ON EACH SIDE AND 5" AT THE END
CUT OUT AT BASE: ON BOTH LONG SIDES OF PLATFORM BASE, 55
1/2"W X 7"H
PLATFORM EDGE: 1MM THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPS IN GRID PATTERN
USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/CK 3/2/17
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR PUBLIC SPACE CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X209C
COLOR #: X209C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X209C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Public Space - Carpet MR-002B
Public Space Alternate - Options Options OA-001BOPT
Corridor - Corridor Carpet PG-002BALT1
Corridor - Corridor Carpet PG-002BALT3
Corridor Alternate - Corridor Options Corridor PG-007BOPT
Options
GLOBAL DESIGN
Specification
ITEM: CARPET BASE FOR PUBLIC SPACE CARPET
CONSTRUCTION: TUFTED, CUT PILE; BOUND
PATTERN #: X209C
COLOR #: X209C
CUSTOM DESIGN/COLOR: YES - STRIKE-OFF NUMBER: X209C
WIDTH: 4" BOUND
PATTERN REPEAT: V: SOLID H: SOLID
YARN PLY: 2 PLY
YARN COMPOSITION: 100% NYLON ECO SOLUTION Q BRANDED YARN
DYE METHOD: SOLUTION DYED
GAUGE/TYPE: 1/10 GAUGE CPG
FINISHED FACE/PILE WEIGHT: 30 OZ.
FINISHED PILE HEIGHT: 0.312"
YARN DENSITY: 3908 OZ C/YRD
YARN DENIER: 1350/2
STITCHES PER INCH: 9.33
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- CLASSICBAC
BINDING: 1/2" BINDING TAPE SINGLE OVER LOCK STITCH-TO MATCH
CARPET
ALL CARPET MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- ASTM E-648 CLASS I RATING FOR COMMERCIAL USE
BUNDLE RAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION- 4.5 LBS
TWISTS PER INCH- 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
OTHER TOPICAL TREATMENTS: N/A
CERTIFICATIONS: LEED INFO - CRADLE TO CRADLE SILVER
CERTIFIED PRODUCT; CRI GREEN LABEL PLUS APPROVED FOR
INDOOR QUALITY STANDARDS
NOTE: QUANTITY MUST BE VERIFIED BY INSTALLER
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16 Room Types Where This Is Used
Public Space - Carpet MR-002B
Public Space Alternate - Options Options OA-001BOPT
Corridor - Corridor Carpet PG-002BALT1
Corridor - Corridor Carpet PG-002BALT3
Corridor Alternate - Corridor Options Corridor PG-007BOPT
Options
GLOBAL DESIGN
Specification
ITEM: BOH/STAIRS CARPET
CONSTRUCTION: TUFTED, CUT & LOOP PILE
PATTERN NUMBER: X965B
COLOR NUMBER(S): X965B
CUSTOM: YES
WIDTH: 12'
PATTERN REPEAT: V: 36" H: 48"
GAUGE/TYPE: 1/10 GAUGE
FINISHED PILE HEIGHT: 0.246"
YARN PLY: 2 PLY
DYE TECHNIQUE: SOLUTION DYED
FACE WEIGHT: 36 OZ
BACKING:
PRIMARY- POLYPROPYLENE
SECONDARY- U PATTERN
YARN COMPOSITION: 100% ECO SOLUTION Q BRANDED YARN
YARN DENIER: 1350/2
YARN DENSITY: 5423 PER C/YRD
STITCHES PER INCH: 10.9"
ALL CARPETS MUST MEET:
COLOR FASTNESS- 4-5
LIGHT FASTNESS- 4-5
FLAMMABILITY- CLASS 1 ASTM E-648
BUNDLE WRAP- 80%
TUFT BIND- CLASSICBAC RATING 5.9 LBS LOOP PILE/ 2 LBS CUT PILE
DELAMINATION: 4.5 LBS
TWISTS PER INCH: 4.5 PER INCH MINIMUM
WEAR WARRANTY: 10 YEAR COMMERCIAL LIMITED
STAIN WARRANTY: LIFETIME STAIN
TOPICAL TREATMENTS: N/A
NOTE: QUANTITIES MUST BE VERIFIED BY AN INSTALLER
LEED INFO: CRADLE TO CRADLE SILVER CERTIFIED PRODUCT
PACKAGING: WRAPPED IN POLYETHYLENE BAGS AND PALLETIZED;
INCLUDED IN COST
GC/CK 12/13/16
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED-QUEEN-BLACK-FOR ACCESSIBLE ROOMS
OVERALL DIM: 59"W X 79 1/2"L X 12"H
BASE: 10 5/8"H BASE RECESSED 8" ON EACH SIDE AND 5" AT THE END
CUT OUT AT BASE: ON BOTH LONG SIDES OF PLATFORM BASE, 55
1/2"W X 7"H
PLATFORM EDGE: 1ML THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPES IN GRID
PATTERN USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/CK 3/2/17
GLOBAL DESIGN
Specification
ITEM: DOUBLE/DOUBLE HEADBOARD FOR READING LIGHTS WITH 28"
ADA CENTER PANEL
OVERALL DIM: 152"W X 3"D X 68"H
HEADBOARDS - 62"W
CENTER PANEL - 28"W WITH REMOVABLE ACCESS PANEL FOR
ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING, HORIZONTAL ON TOP OF
HEADBOARDS, CENTER PANEL AND PANEL BEHIND MATTRESS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 4) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 13/16" X 1 1/4" HOLE IN CENTER PANEL FOR COM
NIGHTSTAND SCONCE, 1" DIA HOLE ON OUTSIDE WOOD FRAMING 44"
ABOVE BOTTOM OF HEADBOARD FOR COM READING LIGHTS
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS, USED 25"W CANTILEVER
NIGHTSTAND Room Types Where This Is Used
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms Alternate - Guestroom Options X-201ADAOPT
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD Guestroom Options
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: DOUBLE/DOUBLE HEADBOARD FOR READING LIGHTS WITH 25"
CENTER PANEL
OVERALL DIM: 149"W X 3"D X 68"H
HEADBOARDS - 62"W
CENTER PANEL - 25"W WITH REMOVABLE ACCESS PANEL FOR
ACCESS TO ELECTRICAL
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON VERTICAL FRAMING AND HORIZONTAL ON TOP
OF HEADBOARDS, CENTER PANEL BEHIND MATTRESS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
INSERT: AT HEADBOARD AND NIGHTSTAND PANELS, THERMOFUSED
MELAMINE, ASIA-ANSONART 48630 LPL LINEN, DOMESTIC-INTERIM-
KML CASUAL LINEN WA4944 LINEN FINISH TEXTURE, DOMESTIC
FINAL-WILSONART 4944-19 LENO WEAVE TEXTURE-AVAIL APRIL 2017
FRAME: 3" WIDE FRAMING IN VENEER FLANKING HEADBOARDS AND
ACROSS ENTIRE TOP OF HEADBOARD/CENTER PANEL SET
LEG KITS: 10 1/2" WIDE LEG KITS (SET OF 4) PROVIDED UNDER
HEADBOARD PANELS
CUTOUT: 13/16" X 1 1/4" HOLE IN CENTER PANEL FOR COM
NIGHTSTAND SCONCE, 1" DIA HOLE ON OUTSIDE WOOD FRAMING 44"
ABOVE BOTTOM OF HEADBOARD FOR COM READING LIGHTS
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
INSTALLATION: MOUNTS ON WALL CLEATS 4" AFF, HARDWARE TO
ATTACH TO WALL TO BE PROVIDED BY GC, RECOMMEND HILTI
SNAPTOGGLE W/ 1/4"-20 BOLTS, USED 25"W CANTILEVER
NIGHTSTAND Room Types Where This Is Used
EDGES: SEALED FOR MOISTURE RESISTANCE Guestrooms Alternate - Guestroom Options X-201OPT
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD Guestroom Options
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: MICROFRIDGE CABINET
OVERALL DIM: 43"W X 23 1/2"D X 26 1/4"H
WOOD VENEER: VICWOOD AMERICAN WALNUT #2C
WOOD SOLID: POPLAR
GRAIN: VERTICAL ON DOORS AND END PANELS
FINISH: TO MATCH ANSONART 48846NT OILED LEGNO, KH-22084-C
TOP COAT: MODIFIED POLYURETHANE
TOP: HIGH PRESSURE LAMINATE-ANSONART 48846NT OILED LEGNO
(ASIA) OR FORMICA 8846NT OILED LEGNO (US)
TOP EDGE: PVC TO MATCH OILED LEGNO
DOORS: TWO EACH
DOOR PULL: RECTANGULAR CUT OUT 8"W X 1 1/2"H CENTERED AT
TOP OF DOOR
CABINET INTERIOR: LEFT FACING SIDE WITH SINGLE HPL SHELF FOR
MICROWAVE, RIGHT FACING SIDE FOR FRIDGE, STAINED TO MATCH
EXTERIOR OF CABINET, INCLUDES VENTILATION HOLES AND HOLE
FOR CORD EXIT
INTERIOR CABINET BOTTOM PANEL: ANSONART 48846NT OILED
LEGNO (ASIA) OR FORMICA 8846NT OILED LEGNO
CABINET CUTOUT: AT INSIDE BACK FOR VENTILATION: 12"W X 13
3/4"H
BASE: 3"H RECESSED BASE FINISHED WITH BLACK LPL WITH CUTOUT
AT TOP FRONT FOR VENTILATION
FRIDGE INTERIOR: 19 5/8"W X 20 9/16"D X 20 1/4"H CLEARANCE FOR
FRIDGE
FRIDGE: SIZED TO FIT ABSOCOLD ARD104AB14 FRIDGE, MI# 246798 -
15"W X 18 1/8"D X 20 5/8"H
MICROWAVE: SIZED TO FIT ABSOCOLD AM090DB, MI# 230913 - 18
3/8"W X 14 3/8"D X 11"H Room Types Where This Is Used
MICROWAVE INTERIOR: 18 7/8"W X 20 1/2"D X 12"H CLEARANCE FOR Guestrooms Alternate - Guestroom X-202ACALT
MICROWAVE
INSTALLATION: ATTACH TO PIN LEGS OF DESK IN THE FIELD,
Alternates Guestroom Alternates
HARDWARE TO ATTACH INCLUDED
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/19/17
GLOBAL DESIGN
Specification
ITEM: PLATFORM BED - DOUBLE - BLACK
OVERALL DIM: 53"W X 79 1/2"L X 12"H
BASE: 10 5/8" H BASE RECESSED 8" ON EACH SIDE AND END
PLATFORM EDGE: 1MM THICK BLACK PVC EDGE BANDING WITH 2 1/2"
RADIUS CORNERS ON FOOT END OF PLATFORM
LAMINATE: BLACK LPL USED ON RECESSED BASE AND PLATFORM
TOP
WOOD SOLID: POPLAR
PLATFORM TOP: INCLUDES 1" W NON-SKID STRIPS IN GRID PATTERN
USING OUTWATER PLASTICS #NS-3200 - 4 OR EQUAL
GLIDES: CARPET GLIDES
ASSEMBLY: SHIPS KD FOR ASSEMBLY IN THE FIELD
EDGES: SEALED FOR MOISTURE RESISTANCE
**NOTE: FINISHED GOODS CONTAINING COMPOSITE WOOD
PRODUCTS MUST COMPLY WITH CALIFORNIA CODE OF
REGULATIONS 93120. PRODUCT AND CARTONS WILL BE LABELED
WITH THIS REGULATION**
CARTONING INCLUDED IN COST
LM/HR UPDATED 1/6/17
GLOBAL DESIGN
Specification
ITEM: GUESTROOM SLEEPER SOFA WITH (4) PILLOWS
DIMENSIONS: TTL HEIGHT: 37 1/4" TO TOP OF PILLOWS, W: 78" TTL
DEPTH: 38" TAPPERED ARM HEIGHT: 23 3/4"(FRONT) 30 1/2"(BACK)
SEAT HEIGHT: 20" SEAT DEPTH: 26 1/2", CUSHION HEIGHT: 8", HEIGHT
W/O PILLOWS: 30 1/2" FRONT RAIL: 9"(H)
METAL LEG DIMENSIONS: 3"(H) NOTE: SCREWED TO BASE OF FRAME
FLAMMABILITY: MUST BE CERTIFIED TO COMPLY WITH CALIFORNIA
TECHNICAL BULLETIN 117-2013 AND BE SO LABELLED.
NON-EXPOSED FRAME: DECIDUOUS HARDWOOD
FINISH: TBD
EXPOSED FRAME: METAL
COLOR: BLACK POWDER COAT
GLIDES: YES, NYLON
SOFA BED MECHANISM: LEGGETT & PLATT CLASSIC 3500 W/ANTI-TILT
MECHANISM
MATTRESS/INNERSPRING: MUST MEET OR EXCEED-5" THICK
MATTRESS/230 COILS FOR 36" & 40"/253 COILS FOR 48"/299 COILS
FOR 52"/345 COILS FOR 60"/2 OZ SYNTHETIC PAD/0.5" FOAM QUILTING
MATTRESS SIZE: FULL SIZE MATTRESS
CONSTRUCTION DETAILS: TIGHT IN BACK UPHOLSTERY. LOOSE
REVERSIBLE SEAT CUSHION WITH WATERFALL EDGE. BLOWN ARM
UPHOLSTERY WITH SINGLE NEEDLE STITCHING.
*NOTE: FOAM ON (BACK) 1.0 DENSITY 12-16 ILD, (SEAT) 2.5 DENSITY
26-30 ILD
PRIMARY UPHOLSTERY:
MFR: PKAUFMANN
PATTERN: NCL ZAMBIA
COLOR: CUST SADDLE (MI#270701)
YARDAGE REQUIRED: 15.9 YDS
PILLOWS: (QTY 4) OVERSTUFFED W/ HIDDEN ZIPPERS & SINGLE
NEEDLE STITCHING
(2) 18" X 18" - .8 YDS
(2) 20" X 20" - 1 YD
*NOTE: FOAM LUXURY BLOWN IN FIBER (2.17 FILL WEIGHT INSERT)
**FINISHED GOOD CONTAINING COMPOSITE WOODS MUST COMPLY
WITH CALIFORNIA CODE OF REGULATIONS 93120. PRODUCT AND
CARTONS MUST BE LABELLED IN ACCORDANCE WITH THE
REGULATION.
CARTONING INCLUDED Room Types Where This Is Used
KE/BMC/HR/BMC UPDATED 3/10/17 Guestrooms Alternate - Guestroom X-239ALT
Alternates Guestroom Alternates
GLOBAL DESIGN
Specification
ITEM: OPTIONAL CLOSET LIGHT
SOURCE: FURNLITE FC-3580 LED
LAMP: LED - WARM WHITE
DIMENSIONS: 22 7/8"W X 1"D X 1 5/16"H
MOUNTING CLIPS: 2 EACH INCLUDED
CORD: 10'
UL LISTED
LM/HR
GLOBAL DESIGN
Specification
ITEM: TOUCH UP KIT FOR MODERN CALM CASEGOODS
SOURCE: TOUCH UP SOLUTIONS
CONTENTS: FILL STICK # 0653-3021-S104
MARKER #0963-Y090-0010
LM/CK 3/1/17
GLOBAL DESIGN
Specification
ITEM: 22" x 68" FULL LENGHT MIRROR
PRODUCT: NON BEVELLED MIRROR
OVERALL DIMENSIONS: 22"W x 68"H x 1/2"D
FRAME MFR: PI FINE ART
FRAME SIZE: 7/8"W
FRAME MATERIAL: METAL
FRAME COLOR: ANTIQUED BRASS
FRAME MODEL NO:
GLASS: MIRROR
GLASS SIZE: 18 1/4"W x 65 1/4"H
TEMPERED GLASS: YES
BEVEL: N/A
MOUNTING: VERTICAL
HANGING METHOD: 3 POINT SECURITY HARDWARE TO BE INCLUDED
NOTE: MFR TO CLEARLY MARK EACH MIRROR WITH ITEM ID AND
REFERENCE DESIGNATOR NUMBER. MFR TO INCLUDE ALL
NECESSARY MOUNTING HARDWARE.
CARTONING INCLUDED
FA/FA
GLOBAL DESIGN
Specification
ITEM: WALL MOUNT
DESCRIPTION: TV PIVOT WALL MOUNT FOR 32" TO 55" LG LED TV'S
WITH 200MM UP TO 400MM VESA PATTERNS
MODEL: HPF650
WALL PLATE: 20.65"W X 6.94"H X 2.32"D
RAILS/ARMS: 15.75"W X 15.75"H X .50"D
TOTAL UNIT DEPTH: 2.84"
COLOR: BLACK
MAX LOAD OF 60 POUNDS
BV/CK 1/23/15
GLOBAL DESIGN
Specification
SUBCOMPACT MICROWAVE OVEN-.09 CF CAPACITY
900 WATTS(IEC-705 TEST PROCEDURE)
ELECTRICAL: 115 VOLTS-60 HZ - AC: 15 AMPS
COLOR - BLACK ON BLACK
10 POWER LEVELS
TURNTABLE: GLASS
TIME COOK: AUTO COOK TOUCH PADS
DIMENSIONS: 18 3/8" W X 11" H X 14 3/8" D
DEFROST: AUTO AND QUICK
CLOCK & TIMER
MANUFACTURED AND UL LISTED BY DAEWOO
MODEL KOR-9GIB
BV/CK UPDATED 11/27/12
GLOBAL DESIGN
Item index
GLOBAL DESIGN
Breakfast Room
Employee Dining
GLOBAL DESIGN
Lobby Lounge
Meeting Room
Office Area
GLOBAL DESIGN
California
Carpet
Drapery
Options
Restrooms
Wall Covering
Effective Date: 12-20-2017
Published Date: 03-31-2017
Version: Version 1.03
Page: 379
Printed Date: 28-03-2017
GLOBAL DESIGN
Exercise Room
Indoor Pool
Outdoor Pool
GLOBAL DESIGN
Patio
GLOBAL DESIGN
Corridors California
Corridor Carpet
Corridor Drapery
Corridor Options
GLOBAL DESIGN
Public Corridor
GLOBAL DESIGN
Guestroom Alternates
Guestrooms California
Guestroom Carpet
Guestroom Drapery
Guestroom Options
GLOBAL DESIGN
GLOBAL DESIGN
King Left
King Right
QQ Accessible Left
GLOBAL DESIGN
QQ Left
QQ Right
QQ Suite Left
Recycling
GLOBAL DESIGN
Updated: 2013.09.16
Marriott Global Design FF&E Product Construction Guidelines
Included Guidelines:
Artwork
Banquet Chairs
Carpet
Casegoods
Decorative Lighting
Fabrics
Mirrors
Outdoor Furniture
Task Chairs
Upholstered Furniture
Wallcovering
Window Treatment
Marriott Global Design Product Guidelines
Artwork
The following are the guidelines for artwork used by Marriott International. Any deviation, modification
or change, must be submitted in writing detailing each deviation. Artwork must meet or exceed the
following guidelines. Supplier is responsible for the structural integrity and durability of finish and
design of any artwork produced. Supplier is to provide shop drawings and finish samples for all custom
artwork as required. Supplier is to obtain approval prior to production of custom art.
Supplier represents and warrants that (i) the Product Designs are original designs created by Supplier(or
its employees or independent contractors) and to the best of Supplier’s knowledge do not infringe the
copyright or other property rights of any third party; (ii) Supplier owns all right, title and interest in the
Product Designs herein conveyed, free and clear of any liens, encumbrances, or other third party
interests of any kind, and free and clear of any claims or litigation, whether pending or threatened.
For third party sourced content, Supplier shall provide account with a copy of all content license
agreement(s) for review and verification.
Frames - Wood
Wood frames will be milled, machined, or carved from hardwoods and softwoods, as specified
to achieve structural integrity and aesthetic requirements. All woods are to be kiln dried and
register not greater than 9% moisture content for hardwoods and not more than 12% moisture
content softwoods. Wood frames must not exhibit surface defects of flaws. Loose knots and
knotholes are not acceptable.
Frames - Polyurethane
Frames are to be of rigid polyurethane with a density of two pounds(+/-) per cubic foot
Polyurethane is to be manufactured without ozone depleting materials (CFC’s).
Frames - MDF
Engineered wood made from refined wood particles 8% (+/-) resin made into hardboard. No
MDF frames in guest bathrooms.
Canvas
Should be 65% cotton, 35% polyester with acrylic coating, water proof and scratch resistant.
Unframed gallery wrap canvas must be made using minimum 1 5/8” deep wood bars, applicable
wood support, and Masonite/hardboard backing.
Paper
Watercolor paper: Bright white, cotton rag based water resistant textured matte paper, acid
free and lignin free. Brightness - 95, Whiteness - 96.5
Matte paper: Premium grade, bright white, 9 mil, 50#.
Latex infused paper: Latex saturated wet strength, ultimate durable poster paper, bright white
matte finish, environmental certificates, 10 mil / 235 gsm.
Mat
100% EcoCore, 2 ply paper mat
Inks
Inks for paper: aqueous water base
Latex infused paper and canvas inks: eco-solvent
Joints
All corners are to be miter cut, glued and joined with pneumatic “V” nail joining equipment. The
placement of the “V” nail will be suitable to ensure the structural integrity of the joint. In no
case will there be less than two “V” nails per joint or less than one “V” mail per inch of molding
width.
Backing
All backing must be 3/16” foam board. 40 lb. craft paper must be provided for dust backing
covering the entire back of the frame.
Glass
Mounting
Finishes
Finishes will meet AWI (Architectural Woodworking Institute) system TR1 for hand applied
finishes. Finishes must have proper, permanent adhesion. Finish is to be protected with both
chemical and abrasion resistant topcoats, per ASTM standards. All corners must be cosmetically
blended and retouched to eliminate visual discontinuity across the joint on both face and sides
of frame. Visible raw wood/polyurethane is not permitted. Production finishes must be
consistent with the pre-approved finish sample. Must be sealed if sprayed or painted. Foiling
and wrapped finishes are acceptable.
Security Hangers
Unless otherwise specified, all artwork must have 3 point security hardware as a method of
hanging. Mounting/Security hardware will be attached to the back of the artwork/mirror, with
the matching wall mount portion packaged and securely fastened to the back of each individual
corresponding piece. Security hardware is to be mounted in the same position on each style and
detailed on the approved shop drawings.
Packaging
All items are to be cartoned. The cost of cartoning is to be included in the cost of goods.
All wall hardware is to be attached to the back of each piece of art. Artwork may then be placed
in a master carton (edge crush test to withstand a minimum of 275 lbs.).
Packaging material must be used to alleviate any movement of the artwork inside the master
carton.
The master carton must then be placed on a pallet and secured with a strap and shrink-
wrapped.
Warranty
All items containing hardwood plywood, particleboard, or medium density fiberboard shipped
into California must be in compliance with 93120-93120.12, title 17, California Code of
Regulations regarding reducing formaldehyde emissions.
2
Marriott Global Design Product Guidelines
Banquet Chairs
The following are the specifications, test and code criteria for banquet chairs used by Marriott International properties. All
banquet chairs must meet or exceed these specifications, tests and codes. All Marriott banquet chair suppliers are
responsible for the structural integrity and durability of finish and design of any banquet chairs they produce. Each supplier
is responsible for providing shop drawings with complete construction information, including where-used and finished
samples. Banquet chairs are those chairs used in conference rooms or other areas where guests gather for conferences,
seminars, luncheons, or other public gatherings. They generally have upholstered seats and backs and they may or may not
have stack/ganging devices. Any deviation, modification or other changes to original or existing specifications must be
submitted to the appropriate Marriott associate or outsourced specifier in writing with drawings clearly showing all
changes and locations on the items.
Warranty
• All Marriott banquet chair suppliers are responsible for the functional durability and conformance to design intent
of any banquet chairs they produce. The chairs shall be warranted for a minimum of 12 years or as specified.
General Specifications
• Steel tubular frames shall be a minimum of 13/16” 18 gauge, unless otherwise specified, and shall meet ASTM A-
513 for 1008/1010; (wall thickness for 18 gauge tubing shall be .049, ± 10% Carbon). All frames shall be sufficient to
withstand guest weight loads for 12 years.
• Chemical Analysis of Steel Tubing: Carbon: .054 to .11, Manganese: .30 to .60, Phosphorous: .035 Max., Sulfur: .035
Max., Rockwell Hardness: B45 to B75.
• Frames shall have a minimum of 24 structural frame welds and shall be electric welded steel tubing w/seamless
joints and corners.
• Glides: 4 premium metal base glides with a chrome metal base and steel umbrella clip (.030 spring steel) sufficient
to withstand 300 pounds minimum force shall be included. Each glide shall have a clear vinyl boot with protective
bumper for stacking and sufficiently affixed so as to prevent accidental removal during use. (Must be suitable for
use on the floor surface of the areas in which the chairs are used).
• Stacking ability is required for all brands. Stacking shall be 8 to 12 high.
• Linking/ganging devices shall be constructed so as to not interfere with dining or other configurations when not
ganged. (Linking devices are required for orders of 100 or more chairs).
• Legs shall have support stretchers sufficient in number and placement to maintain structural stability over the life of
the chairs.
• Finishes
• Metals shall be pre-treated for corrosion resistance and to enhance finish adhesion. The finish shall be
epoxy powder coat or plated.
• All production finishes must match approved samples.
• Finishes are to be clean and clear in tone, smooth and without variation between any sides.
• Inner back wood shall have a minimum of ½” thick curved plywood, unless otherwise specified, with 1” thick 1.2 lb.
/cubic foot density Ca 117 flame retardant polyurethane foam over a passive lumbar support.
• Outer back wood shall have a minimum of 1/8” non tempered hardboard, or as specified, covered by ¼” Ca 117 fire
retardant polyurethane foam. Outer back shall be attached so that fasteners are not exposed. (Flex back chairs are
the preferred option for Marriott Full Service, Renaissance and JW Marriott).
• Seat construction shall be have a minimum of ¾” MDF, or as specified, covered with 2” thick 2.8 density Ca 117
flame retardant conventional foam with an IFD of 60. It shall be glued to panels to prevent shifting.
• Face Fabrics
• Banquet chair suppliers are not responsible for construction and performance of face fabrics NOT specified
by them, but they are responsible for construction and performance of face fabrics from their lines
included with the products. In all cases the banquet chairs supplier is responsible for diligence in identifying
defective fabrics, and in the timely notification of the Marriott buyer.
• All banquet chair suppliers shall fully insure that they have complete understanding of the direction the
designer wants directional fabrics to take on the piece; side-to-side or floor-to-back.
• It is the seating supplier’s responsibility to insure that all fabric pattern matching is appropriate and utilizes
the best yields. All banquet chairs suppliers shall notify the designer or commodity manager if there are
ways to have better fabric yields.
• All face fabric tailoring is to be smooth and evenly applied. (If COM, the fabric shall be specified with each
scheme or custom project).
• Seams are to be of sufficient depth and stitches to be within industry standards with a minimum yield (grab)
of 1/2”, or greater if necessary to minimize seam slippage. Triple stitched French seams shall be used on the
seat, double folded with ½” tape sewn along the backside of the seam. Thread used in stitching is to be of
sufficient quality for contract use. All seams, including piping/welts, shall be sufficiently sewn to perform
without failure for the life of the chair.
• Overall tolerances shall be ± ½”.
• Carriers: Marriott Full Service orders shall specify carriers at the rate of one per 250 chairs.
Packaging
All items shall be cartoned unless an approved alternate has been authorized. The cost of cartoning shall be
included in the cost of goods. Prior to packing in cartons, all items shall be wrapped in polyethylene film of
sufficient thickness to protect and stabilize the products. Cartoning shall meet or exceed the NMFC regulations for
strength as required for shipments via common carriers. (National Motor Freight Classification. Freight is classified
based on an evaluation of four transportation characteristics: density, stowability, handling and liability.
Together, these characteristics establish a commodity’s “transportability.”) All cartons will be labeled in
accordance with Marriott International labeling instructions.
Marriott International Banquet and Stack Chair Test Criteria, ANSI/BIFMA X5.1-12-31-2002
(ANSI: American National Standards Institute; BIFMA: Business & Institutional Manufacturer’s Association. Consult the
BIFMA Test above for full criteria and Illustrations. All chairs shall meet all applicable tests).
Purpose
To evaluate the safety, durability, and structural adequacy of banquet and task chairs in their entirety as well as their parts.
ACT (Association of Contract Textiles) as Modified for Marriott Use for Banquet Chair Fabrics)
• Abrasion Resistance, All Decorative Fabrics: Wyzenbeek: 50,000 Double Rubs for Banquet Chair Fabrics, ASTM
D4157-02; Back and Forth Motion, #10 Duck; 62,500 if Martindale, ASTM D4966-98; 12 KPa pressure; Circular
Motion, #10 Duck.
• Wet and Dry Crocking: All Fabrics, 4.0 Dry, 3.5 Wet –AATCC 8-2001.
• Tensile Strength: ASTM D5034-95 (2001) (Grab Test): Upholstery: 50 lbs. warp and fill (no knits).
• Soil Release: Upholstery fabrics are to be treated with the appropriate soil release, not Scotchgard. Fabrics with
Crypton or Crypton-like finishes do not require soil release.
3
Marriott Global Design Product Guidelines
Bed Skirts – Box Spring/Foundation Covers- Bed Throw Pillows
The following are the specifications and codes for top-of-bed decorative products. Any deviations,
modification or other changes must be submitted to the appropriate specifier in writing with drawings clearly
showing all item changes. All top-of-bed decorative products must meet or exceed the specifications and
codes included within and any applicable local code requirements.
Decorative Fabrics
• Patterns that run the length of the roll are addressed as “up-the-roll” and patterns that run
selvedge-to-selvedge are addressed as “railroaded”. It is critical that the fabricator knows how the
specifier wants the pattern to run. It is also the fabricator’s responsibility during development to
suggest alternate direction of the fabric orientation, if possible, in order to achieve the design
intent and optimum yield.
• Cleaning instruction labels (if applicable) shall be attached to all bed skirts, box spring / foundation
covers and throw pillow covers. Label verbiage shall be submitted to specifier for review and
approval prior to production.
• All threads shall be selected by the fabricator to blend with the colors of the products.
• Sample Approval: The fabricator shall make a production sample of all products to send to the
specifier prior to production start-up for aesthetic and proper-fit approval.
• Tolerance: ± ½” on each side for all products.
• Platform top for bed skirts and box spring covers: 70/30 white poly/cotton or 78/54 white
cotton/poly with 4” face fabric strip sewn all around the perimeter’s top with mitered and serged
corners.
• Stitches:
1. Single or double needle lockstitch: 7 to 9 per inch
2. All seams to be serged: 5 per inch
3. Blindstitch: 3 per inch
Bed Skirts
• If seamed, the seam must be concealed in the pleat, not in the center of the pleat where it would
be visible.
• Bed skirts shall be constructed with various drop lengths dependent upon the box spring and bed
rail or base being used. Therefore, all properties shall confirm their box spring height, width and
length, as well as all drops before orders are placed.
• 12" Head huggers made of decking fabric shall be stitched to the side of the skirts at the head of
the bed to hold the skirts in place.
• May be specified with inverted pleats, and the number per skirt shall be identified during
development. Each pleat apex shall have reinforced stitching to help prevent tears. Pleat turn-
back shall be 3” each side to equal 12 inches extra fabric. The apex of the pleat shall be located
at a point down from the top of the skirt to be determined by the specifier prior to production.
• Shall be constructed to withstand daily housekeeping adjustments during linen change.
Box Spring / Foundation Covers
• Box Spring Cover Dimensions: Determined by the size of the box springs: height, width and
length
• Lined: Not typically; if lined, lining shall be specified
• Construction: To fit snugly around all 4 sides of the box springs and to tuck 2” under the box
springs / foundations all around.
• Elastic: 3/8” or ½” elastic serged (overlock stitched) at hems.
• Decorative throw pillow covers for top of bed use shall be constructed to withstand daily laundering.
• Generally knife edges for square or rectangular, unless otherwise specified.
• Seams: Serged and single-needle lockstitched.
• Closure: Zippers shall have opposing face fabric flaps over them and they shall be adjacent to the
longest seam to produce a hidden appearance.
• Inserts
• Minimum 180 thread count, 100% cotton, white
• Fill: Durafill® garneted fiber fill or equal.
• Abrasion Resistance, All Decorative Fabrics: Wyzenbeek: ASTM D4157-02; Back and Forth Motion,
#10 Duck; Martindale, ASTM D4966-98; 12 KPa pressure; Circular Motion, #10 Duck; (20,000
Double Rubs for Bed Wyzenbeek, 25,000 for Martindale)
• Colorfastness to Light – AATCC 16 Option 1 or 3-2003: Top-of-bed fabrics: 40 Hours, Grade 4 (High
sunlight through window areas should be 60 Hours, Grade 4)
• Wet and Dry Crocking, All Fabrics, 4.0 Dry, 3.5 Wet –AATCC 8-200, (Except prints: AATCC 116—
2001)
• Pill, All Fabrics: Brush Pill ASTM D 3511-02, Class 4.5
• Seam Slippage, ASTM D3597-02-D434-95: (Fabric Pulls Apart Near the Seam, Warp or Fill) 35 lbs.
• Tensile Strength. Fabrics – ASTM D5034-95 (2001) (Grab Test): Comforter/Duvet, Scarf, or Bed
Skirt: 35 lbs.
• Picking: Any construction subject to picking, such as floats in excess of 2 to 4, dependent upon
construction, genuine Chenille yarns, etc., should not be used unless warranted in writing against
picking.
• Whiteness/Yellowness Index: (For predominantly white fabrics only) ASTM E 313/D 1925.
• Dimensional Change to Laundering : AATCC 96 +/- 3.5% change, maximum
Packaging
All items shall be packaged in polyethylene bags, folded in a manner to minimize wrinkles and cartoned All
internal packaging materials and the carton costs are to be included in the price of the goods.
2
Marriott Global Design Product Guidelines
Carpet, Area Rugs and Padding
The following are the specifications and codes for all Carpet, Area Rugs and Padding for Marriott International
NALO properties. Any deviations, modifications or other changes must be submitted to the appropriate specifier in
writing with drawings clearly showing all changes and location on the items. All Carpet, Area Rugs, and Padding
must meet or exceed these specifications and codes. All Carpet, Area Rugs and Padding suppliers are responsible
for the structural integrity and durability of the construction through the ten-year life cycle. The specifier is
responsible for fully explaining the end usage so the carpet supplier may suggest construction choices best suited
to the application. If the carpet is intended to be seamed, it is to be manufactured such that it will pattern match after
seaming. The suppliers shall provide flooded floor plans in color and shall have field measuring capabilities for
public spaces and other areas as required.
100% SD Nylon
Tufted Broadloom
Guestrooms 100% SD Nylon 100% SD Nylon Tufted 100% SD Nylon Luxury Vinyl 100% SD Nylon Luxury Vinyl Tile
Tufted Broadloom Broadloom Tufted Broadloom Tile (see LVT Tufted Broadloom (see LVT
specifications) specifications)
Area Rugs
Area Rugs Area Rugs
Corridors 80/20 Ax 8 Row 100% Nylon Ax 7 row 100% SD Nylon 100% SD Nylon 100% Nylon Ax 100% SD Nylon
Tufted Broadloom, Carpet Tiles 7 row Tufted
CYP and Carpet Broadloom
100% SD Nylon 100% SD Nylon Tufted Tiles
CYP Broadloom, CYP and 100% SD Nylon
Carpet Tiles CYP
100% Nylon Ax 7
Row
Public Space 80/20 Ax 9 Row 100% Nylon Ax 8 Row 100% SD Nylon 100% Nylon Ax 8
Tufted Broadloom, Row
(Including CYP and Carpet
MH/RH 100% SD Nylon CYP Tiles
and Carpet Tiles 100% SD Nylon
Ballrooms, CYP
Pre-Function 100% Nylon Ax 8
& Meeting Row
Rooms
100% SD Nylon
Carpet Tiles
Printed Tiles
Back of 100% SD Nylon 100% SD Nylon Tufted 100% SD Nylon
Tufted Broadloom Broadloom Tufted Broadloom
House
CPT-001 Rev 1 2
Area Rug Specification
• Construction: Hand Tufted, Hand Woven, Machine Woven, CYP or Axminster
MH & RH: Hand Woven Preferred
• Pile Fiber: Guestrooms: 100% Wool, 80% Wool/20% Nylon, 100% Nylon, PET (Moxy Only)
Public Space: 100% Wool, 80% Wool/20% Nylon, 100% Nylon
• Wool Source: New Zealand Wool, British Wool or Mediterranean Blend
• Dye Method: Skein Dyed or Solution Dyed
• Pile Finish: Cut, Cut & Loop, Tip Sheared, Carved MH & RH: Cut Pile Preferred
• Primary Backing: 100% Cotton Canvas or Polyester
• Secondary Backing: Integrated Non-Skid Backing,100% Cotton Scrim/Rubberized Latex or Action Bac
• Edge Binding: Sewn on Synthetic or Cotton Binding Tape, Turned Edges, or Hand Surged Edges are
acceptable. A binding tape, that is close in color, should be sewn on first with surged edges for added
protection. Sew over the top of the tape with the serging yarn for a finished edge. Where binding tape is
not used, provide a sewn on selvage edge of no less that two inches, fully coated with backing material.
Provide with mitered edges which are in compliance with current ADA requirements. Serged Edges with
no binding tape are for low traffic areas only.
• Rows Per Inch: Minimum 5.50 - 6.10
• Stitches Per Inch: 6.0
• Yarn Size: 1/81’s 4 Ends
• Pile Weight: Guestrooms: 72 Oz/SY-88 Oz/SY Public Space: 88 Oz/SY-104 Oz/SY
• Pile Height: 0.394” (10mm) – 0.472” (12mm) Cut Pile / 0.354” (9mm) – 0.433” (11mm) Loop Pile
• Total Weight: 141 Oz/SY – 152 Oz/SY Cut / 138 Oz/SY – 149 Oz/SY Loop
• Yarn Treatment: Moth Proofed
• Flammability: Passes ASTM D2859 CPSC FF 1-70 Pill Test and ASTM E-648 Class I Radiant Panel for
Public Space and Class II for Guestrooms
• Electrostatic Propensity: Permanent Anti-Stat Less than 3.5 KV AATCC 134
CPT-001 Rev 1 3
Woven Axminster Carpet Specification Minimums
• Pile Fiber: MHR & RHR: 80/20 Wool/Nylon Type 6.6 CFRST (Courtyard, Fairfield Inn & Suites,
Residence Inn, SpringHill Suites & TownePlace Suites): 100% Nylon Type 6.6
• Dye Method: Skein Dyed Wool Source: New Zealand Wool, British Wool or Mediterranean Wool
• Row Per Inch: (see above where used) 7 Row 8 Row 9 Row
• Rows per Decimeter: 7 Row: 27.6 8 Row: 31.5 9 Row: 35.4
• Finished Pile Weight 80%Wool / 20%Nylon: 7 Row: 28.1 Oz/SY 8 Row:32.1 Oz/SY 9 Row:36.2 Oz/SY
• Finished Pile Weight 100% Nylon: 7 Row: 25.6 Oz/SY 8 Row: 29.3 Oz/SY 9 Row:32.9 Oz/SY
• Pile Density 80%Wool / 20%Nylon: 7 Row: 4055 8 Row: 4635 9 Row: 5214
• Pile Density 100% Nylon: 7 Row: 3686 8 Row: 4213 9 Row: 4740
• Finished Pile Height: 0.250”
• Yarn ply: 2 Singles twist ± 10%: 3.6 2-Ply twist ± 10%: 4.1
• Yarn Count: 80% Wool / 20% Nylon: 2/47 Dewsbury / R660/2 Tex 100% Nylon: 2/52 Dewsbury / R660/2
• Tufts per Square Inch: 7 Row: 49 8 Row: 56 9 Row: 63
• Pitch per Inch: 7 Pitch per Decimeter: 27.6
• Backing: Woven Polypropylene Back Coat: 6.5 oz/yd²
• Width: As ordered, ± 1.25%
• Bow tolerance: < 1% Squareness/skew tolerance: < 1%
• Light fastness, ISO-B02: 5 Wet Fastness, ISO105-E01: 4 Rubbing Fastness, ISO 105-X12: 3
• Static Electricity: Stroll Test EN-1815: < 2 Kv Thermal Resistance, ISO 8302: ≤ 0.075(M²kw)
• Static Electricity: Horizontal Resistance, ISO 10965: ≤ 10¹°ohms Vertical, ISO 19065: ≤ 10¹° ohms
• Warranty: 10 Year Wear, 5 Year Manufacturing Defects
• Selvedges: Protected
• Soil and Stain Treated: Yes
• Design and color match: As sampled Size per dye lot: No color variation/phase
• Installation method: As specified
• Pattern match finished: Exact Carpet pattern match tolerance: 0.8% before stretching
CPT-001 Rev 1 4
Tufted Broadloom Carpet Specification Minimums
• Construction: Cut & Loop Pile; 100% Loop Pile 4” Bound Base: 100% Cut Pile or 100% Loop Pile
Binding for Base: ½” Binding Tape – color to match carpet
• Pile Fiber: 100% Nylon Type 6 or 6.6
• Dye Method: Solution Dyed
• Gauge: 1/10
• Stitches Per Inch: 10
• Twists Per Inch: 4.5
• Finished Pile Height: Cut & Loop Pile: 0.25” / 100% Loop Pile: 0.125” (not to exceed 0.50”)
• Face Weight: Guestrooms: Cut & Loop Pile: 32 Oz / Loop Pile: 26 Oz Corridors: Cut & Loop Pile: 36 Oz
4” Bound Base: 100% Cut Pile: 30 Oz / 100% Loop Pile: 28 Oz
• Total Face Weight: Guestrooms: Cut & Loop Pile: 64 Oz / Cut Pile: 64 Oz / Loop Pile: 56 Oz
Corridors: Cut & Loop Pile: 76 Oz 4” Bound Base: 100% Cut Pile: 60 Oz / 100% Loop Pile: 56 Oz
• Pile Density: Cut & Loop Pile: 4600 Oz per C/Yd / 100% Loop Pile: 7800 Oz per C/Yd
• Yarn ply: 2 Ply
• Yarn Denier: 1350/2
• Tuft Bind: Cut Pile: 3.5 lbs. / Loop Pile: 6.25 lbs.
• Delamination: 4.5 lbs. ClassicBac / ActionBac
• Primary Backing: Polypropylene
• Secondary Backing: Equal to ClassicBac or ActionBac – SBR Latex Pre-Coat and secondary coat
laminated to a woven secondary backing
• Bundle Wrap: 80%
• Warranty: 10 Year Wear / Lifetime Stain per Commercial Warranty
CPT-001 Rev 1 5
Codes, Test Parameters and Cleaning
o Colorfastness to Light: AATCC Test Method 16 – 1998 Option E (Rating: Min. 5). Standard test
method to determine resistance to fading using a water-cooled Xenon Arc Lamp, continuous light.
o Colorfastness to Ozone: AATCC 129. (Rating: Min. 4)
o Backing Breaking Load test: ASTM D2646-05, Sections 16 to 24. Standard test method for backing
tensile strength
o Delamination: ASTM D-3936. Standard test method for measuring the force required to strip the
secondary. (Rating: 3.5 lbs. for Cut Pile/ 6.25 lbs. for Loop Pile)
o Surface Flammability Test (Radiant Panel): ASTM E-648. (Rating: Class 1) Standard test method for
testing the surface flammability of carpets and rugs. Class II — average minimum 0.22 watts per square
centimeter within exits, access to exits (corridors
o Optical smoke density: ASTM E-662. Standard test method for specific optical density of smoke
generation of a light beam by smoke (With the exception of New York City, very few jurisdictions require
this test)
o Resistance to Crocking: AATCC 165. (Rating: Min. 4) Standard test method for resistance to crocking
for textile floor coverings using the crockmeter method.
o Mass: ASTM D5848-07 Section 9. Standard test method for mass-per-unit area of pile yarn floor
coverings – pile weight – coated.
o Height/Thickness: ASTM D6859. Standard test method to determine the tuft height and pile thickness of
pile floor coverings.
o Bind: ASTM D1335-05. (6.25 lbs. loop pile; 3 lbs. cut pile) Standard test method for the tuft bind of pile
floor coverings
o Abrasion: ASTM D4158-08. Standard test method for abrasion resistance of carpet (Uniform abrasion,
70,000 revolutions required)
o Surface Appearance Retention: ASTM D-6119, Hexapod Drum Test. Based on a 12,000 cycle
Hexapod exposure conditioning test, all carpets and area rugs shall have a least a:
o 2.5 ARR, moderate traffic end use
o 3.0 ARR, heavy traffic end use
o 3.5 ARR, severe traffic use
o End use Application Traffic Level Classification guideline performance ratings:
3.5 ARR, conference rooms
3.0 ARR, suites and guest rooms
3.5 ARR, dining rooms
3.0 ARR, back of house
3.5 ARR, general public spaces; lobby etc.
o Residual Grease: BS 3582. British test method for determining the amount of residual grease or oils
o Compression: ISO 3415 – Static Loading Compression Test. ISO test to determine the effects of
weights placed on it to replicate the effects of furniture. 77% thickness recovery, 62% compression recovery
required
o Electrostatic Properties: AATCC 134. Standard test method for determining the electrostatic properties
when a person walks across the carpet, in step and scuff modes.
CPT-001 Rev 1 6
CRI Carpet Green Label/Green Label Plus Test Criteria are required for LEED Volume New Builds and
Recommended for all Others
o Green Label/Green Label Plus. The Green Label program tests carpet, cushions and adhesives to help
the specifiers identify products with very low emissions of VOCs. CRI has recently launched its next series
of improvements called Green Label Plus for Carpet and Adhesives. This enhanced program sets an even
higher standard for IAQ and ensures that customers are purchasing the very lowest emitting products.
Carpet is recommended for all projects but required for Green Label Plus.
o Green Label Plus: To receive initial certification, carpet products undergo a 14-day testing
process, as required by Section 01350 that measures emissions for a range of possible chemicals.
Carpet products: An independent laboratory tests carpet products for emission levels for
seven chemicals as required by Section 01350, plus six additional chemicals as required
by CRI. There are 13 chemicals measured in total.
Adhesives: An independent laboratory tests adhesives for emission levels for 10
chemicals as required by Section 01350, plus 5 additional chemicals as required by CRI.
There are 15 chemicals measured in total.
o Green Label: CRI has established the Green Label program to test for VOCs in cushion used
under carpet. This programs helps the carpet manufacturer, installer and end user identify and
utilize low-emission cushion. Cushion products that meet the current emissions criteria can display
the program’s green and white seal. Products are retested regularly for continued compliance.
Cushion products: Characterized as prime polyurethane, bonded polyurethane,
mechanically frothed polyurethane, rubber-hair, rubber–jute, synthetic fiber, resonated or
coated synthetic fiber, rubber and rubberized polyurethane.
For additional information, contact the Carpet Cushion Council at ww.carpetcushion.org
CPT-001 Rev 1 7
Marriott Global Design Product Guidelines
Casegoods
The following are the specifications, test and code criteria for casegoods. All casegoods must
meet or exceed these specifications, tests and codes. All Marriott International Design and
Construction Services (hereinafter referred to as MIDCS) casegoods manufacturers are
responsible for the structural integrity and durability of finish and design of any casegoods they
produce for MIDCS. Each supplier is responsible for providing shop drawings with complete
construction information, including where-used, as well as providing finished samples. Any
deviation, modification, change, etc .to a new or existing item must be submitted in writing with a
drawing clearly and specifically detailing each deviation and location of the detail. All suppliers
are to obtain approval prior to production startup of newly create casegoods designs.
Materials shall be new and both workmanship and materials shall be for commercial se.
The work shall be executed in strict accordance with dimensional design requirements of
specifications. The work shall be under direct supervision of competent representatives
of the contractor, and shall be expected to last 12 years for Fairfield Inn and 18 years for
all other brands.
The work shall be in accordance with approved drawings. The contractor shall submit
such “samples” of materials, shop drawings and other samples as may be required by
Procurement and/or Interior Design for approval prior to fabrication.
Wood Materials
Veneer:
The veneer shall be real specified species, first quality, unless otherwise
specified. Exposed work shall be carefully matched to produce continuity of
veneer lines and designs. Generally, veneer shall be used for door and drawer
fronts, case pieces, exposed side panels and night stand back panels.
Solids:
Exposed solids shall be hard maple or oak, Select Number 1 Common with a yield of 66 2/3% to
83 1/3% in minimum size clear wood cuttings of at least 3” wide by 3’ long or 4” wide by 2’.
(Minimum 2 ½” long by 4’ long after kiln drying) Unexposed solids shall be sound poplar or
better. Wood materials shall be kiln dried to moisture content of 8% to 10%.
Wood Source:
• Where possible, SFI, Sustainable Forest Initiative lumber shall be used. Exposed solid
wood shall always be Select #1.
• Tops on dressers, nightstands, desks or other case pieces shall be particle or flake
board unless otherwise specified.
• Outside backs on case pieces shall typically be ¼” MDF or ½” MDF if there are mounted
items.
Finishing:
The stain color shall match wood grain high pressure laminate. Akzo or Lilly certified
stains and natural nitrocellulose pre-catalyzed lacquer coat to be used on all pieces.
Finish shall be of a character that includes hand padding and gloss shall be 50-60 sheen
or sheen per approved finish panel.
The finish will consist of the following. Each step must be followed.
NOTICE: The interior sidewalls next to the doors and drawers are to be finished, so the guest
does not see the unfurnished areas when the drawers are open.
Construction Features
The type of construction used shall be concealed finger joints, mortise-tenon and dowel-
panel, rigidly assembled. Panels shall be corner blocked, glued and cross-screwed.
Furniture quality screws #8 to #10 with sufficient screw type bite shall be used. Clamp
nails shall be used on mitered bases and aprons.
Joints, corners and miters with 1 1/4“L x 5/16”D glued double dowels shall be accurately
fitted and rigidly secured using the case clamp technique. Joints shall be splined,
mortised and tenoned, tongued, doweled, or full length blocked as well as glued and
screwed in two directions. Glues used in joint construction shall be commercial furniture
grade. Excess glue shall be removed from visible areas prior to finishing.
Side core materials shall be 45 lbs. density industrial weight flakeboard. Cores will be 3-
ply construction with veneer backer. Grooved trim shall be solid oak or maple and
shaped.
Tops
Top cores shall be of minimum ¾” thick, 3 ply with .05 high pressure laminate, 45 pound
particle board stripped 3-sides with solid shaped maple or other approved hardwood
edge. The top edges shall be trimmed and rounded with the top laminate overlap at a
minimum of 1/8”. The glue shall meet the requirements of CS-35-36 and back edges
shall be sealed. The underside shall have an appropriate balancing backer sheet and
laminates shall be high pressure horizontal grade. Supports shall include front and back
anti-sag rails to prevent warping.
Drawer Construction
a) Drawer fronts shall be 3/4 “thick particleboard core minimum 3-ply unless otherwise
specified and the front shall be Veneer with matching backer (Natural veneer shall be a
minimum of .60mm thick and reconstituted a minimum of .45mm. Drawer fronts shall
have Veneer edge banding on all sides, or solid hardwood unless otherwise specified.
(Veneer: .06mm natural and .45 mm reconstituted).
b) Drawer sides and backs shall be of minimum 7/16” thickness plywood or sealed wood
sanded smooth and splinter free. Drawer sides shall be securely joined with English or
French dovetailed joints connected to the drawer fronts with full Groove and Tenon at
each back. Box sides shall be at least ¾ of the height of the drawer face. Drawer depth
from front-to-back shall be as deep as possible. Each part shall be sanded smooth and
sealed with a moisture resistant coater. All joints are to be glued.
c) Drawer bottoms shall be of minimum 1/8” thick epoxy coated hardboard, glued plywood,
birch or maple, or veneer covered and resistant to spills and stains. The perimeter
under the bottom shall be continuous hot melt glued with no breaks, and fully captured in
a groove at front sides and back. Additional stretchers shall be used underneath as
needed for structural stability and strength. The interior finish shall be clear coated or
stained as specified.
d) Drawer side guides shall be a minimum of 75 pound heavy duty full extension with
trigger locks and ball bearings (75 lbs. total for drawer). Guides secured with screws to
draw sides and case sides and partitions. (Linda will verify with F and K what they are
actually doing) Drawer sides shall be English or French joints.
Hardware
Pulls, handles and other decorative hardware shall be of the type and finish as shown on
the drawings. To ensure design intent, samples shall be submitted to the specifier for
approval.
Doors
Doors with MDF cores and covered with veneer or formed solid wood are acceptable
provided the doors are warranted to not warp over their life spans. However, solid wood
is preferred on all impact areas. Door edges shall be lumber banded where hardware is
attached.
Edges
Panels that come into contact with the floor shall be 3-ply construction Veneer face with
balancing backer, Veneer edge band. Furniture glides with a minimum diameter of 5/8”
shall be used in all four corners. The front glides shall be adjustable on all credenzas or
any piece with doors or long pieces. No open wood edges are permitted. Edges shall
be edge banded and sealed. Bottom edges shall be polyvinyl sealed including tackless
carpet cut out.
Back Panels
Back panels shall be recessed 1 3/4” for electrical cord plugs and shall be attached with
coated industrial type staples. The staples are placed into solid rails when possible.
Back panels shall be secure at all four corners with wood screws, and include tackless
carpet cut out. The material shall be ¼” thick MDF or ½” where there are mounted items.
Packing
All items are packed accordingly with the “F” package as described in the uniform freight
classification for furniture packing. All items are wrapped in a 1/8” microfoam wrap with
a 3/4” pulp corner pads for edge protection. All large case items are shipped on a 1 1/2”
wood skid. All cartons will have either a 200 lbs. or 275 lbs. test corrugated board. Test
pounds (lbs.) are determined by overall size. Desks and large tables are to be shipped
knocked-down (KD) and all legs use metal corner blocks, fastened to legs with barrel-
bolted lag bolts and two nylon dowels.
Cartons are to be loaded, so the products are not damaged en route. The supplier is to
supervise the packing to avoid over stacking, wrong sides up, and crushing of the
contents.
Freight charges shall be third party billed by the carrier to Account. The Bill of Lading
marked with the purchase order number, material ID number, and/or supplier’s model
number, and Bill of Lading prepaid and noted. Freight charges are to be billed to the
appropriate account.
Any LTL or TL, except RPS and UPS shipments, shall be shipped per Marriott
International’s Routing Guide.
Night Stands
The bottom shelf on all night stands will have laminate top and balancing backer, same
specifications and laminate as on top. Laminates are preferred on all pieces with
exposed shelves.
Back Splash
Headboards shall be wall mounted. The top half of the wood cleat shall be factory
applied with the headboard and the bottom half shall be included in the same carton.
Solid interior parts shall be hardwood unless otherwise specified and shall be free from
defects which may impair serviceability. The species shall be of types that are
aesthetically and structurally correct for their intended purposes. The manufacturer
shall supply all brackets and cleats required for installation. The fasteners required to
attach the headboards shall be supplied by the installer due to varying wall materials and
constructions. The cleat shall be positioned so as to secure the headboard tightly
against the wall after installation. Polyurethane Bow top, frame, and edges to be used
when specified. It is the manufacturer’s responsibility to ensure that all headboards
meet all jurisdictional requirements including, but not limited to, UL-962, UL-723, ASTM
E-84 or NFPA-255 as they apply to the selected headboards, with or without lighting
and/or electrical drops.
Base
• The base must pass the UL requirement which states that all floor & table lamps must be stable enough to
be placed on an 8 degree angle without tipping over. The base shall include a protective coating to prevent
corrosion and rust. Bottom of bases to be covered in felt or rubber to prevent skidding on the table surface
top.
• Wall bracket arms should have two points of connection to the back plates. Any single arms with one point
of connection are not recommended but should be tightly fixed and glued to prevent rotation.
Ballasts
• Ballasts are considered a part of the fixture and must be warranted for the life of the fixture and
replaceable by the supplier. Recommended ballasts: Advance or Universal.
Sockets
• Phenolic o r p o r c e l a i n are recommended for use. Use medium base sockets for all portable fixtures and
wherever possible for hardwired fixtures; GU24 or pin based sockets can be used in hardwired fixtures
when necessary.
Switches
• Switches must be rocker style and ADA compliant. The ADA (American Disabilities Act) requires that
switches are not more than 48” off the floor if the switch is accessible only by forward reach (reaching
in front of a wheel chair). If a wheel chair can be positioned alongside the switch for side-reach, it can
be 54” off the floor. Switches should be secured with a metal clip and glue.
• The shade frame a n d s p i d e r s , and all components (harps, finials, etc.) shall have a protective
coating to prevent rust. All fabrics used on shades must be in compliance with UL requirements for
weight and distance-from-the-lamp dependent upon the lamp wattage. The inner lining, referred to as
“Hardback” must be v i r g i n ( n o n - r e c y c l e d ) polystyrene a n d s h a l l b e o f s u f f i c i e n t
thickness to avoid creasing and maintain the shape of the shade during
normal handling. Polystyrene should have a minimum thickness of .4mm.
Fabrics shall be trimmed neatly to avoid raw edges or loose threads
s h o w i n g t h r o u g h t h e l i t s h a d e . Any trim used must be glued or machined in place for
permanency. Any diffusers used must be selected carefully to perform properly based on design and heat
considerations.
1
Finishes
• To be determined by the specifier for specific applications. All finishes should be durable and protected to
withstand possible corrosion from multi-purpose surface cleaners used by housekeeping.
Powder Coating
• Powder coating is recommended when humidity is a factor to retard rust. Powder coat must be durable
enough to prevent scratching.
Painted Finishes
Plated Finishes
• All plated finishes must comply with ASTM standards and be coated to prevent rust. The fixtures must be
coated after any bending of metal.
Metal Gauge
• Metal gauge (or thickness) shall be fit and sufficient for the intended use of all fixture applications and meet
all necessary requirements in a hospitality environment. Metal gauge is to be thick enough to prevent any
deflection or denting (when used on bases for portables and back plates for wall mounted fixtures) and to
prevent leaning (when used on vertical posts for table and floor lamps).
• Outlets must be securely attached to fixture using metal clips and glue and must last the life of the fixture.
Fixtures that contain outlets are to have a minimum 3.5 amp, 125V electric outlet with 18 gauge cord set.
Higher amperage outlets may be specified if required; outlet amperage ratings at 15 amp or higher will
require a 14 gauge cord set. If multiple outlets are used, they must have different orientations for easy
application for multiple charger styles. Tamper resistant outlets may be required dependent upon local
jurisdictional requirements. Cord length specified should to be measured from the base of the fixture to the
end of the plug.
USB Outlets:
• Transformers are to be10 watt, 2amp minimum to allow for charging both cell phones and
tablets/computers.
Light Bulbs:
• LED bulbs are preferred, and Compact Fluorescents (CFL’s) are acceptable. Check the light fixture socket
configuration as use of CFL bulbs in base up orientation may decrease the life expectancy of the bulb.
Integrated LED panels and strip tapes can be used for specific applications.
2
Dimming Systems:
• If using dimming systems, predominately in the public space, ensure that all specified dimmable light bulbs
and LED drivers (used in integrated LED light fixtures) are compatible with the dimming system being used.
Voltage:
• Voltage should be clearly marked on the light fixture. Check with specifier prior to production to verify
voltage requirements, especially with corridor fixtures where 277 volt may be used. Use of dual voltage
ballasts in corridors and public spaces will avoid potential voltage coordination errors.
• Light fixtures to be used in California must comply with Title 20 and Title 24 California Electric Code, or
applicable current code.
Certification
• Marriott accepts OSHA approved independent certification laboratory standards and all
lighting products must meet or exceed these guidelines and codes, including but not limited to UL, CUL,
ETL, ANSI and NFPA, however some local jurisdictions specifically require UL. Light Fixtures must display
the approval label of an OSHA-approved independent certification laboratory. Local jurisdiction
requirements should be checked in order to meet compliance.
3
Marriott Global Design Product Guidelines
Upholstered Furniture Fabrics
• The following are the general specifications for all fabrics used in upholstered furniture products. All
fabrics must meet or exceed these specifications within and perform as required for their intended
use. Each supplier shall provide complete specifications including applicable performance test data.
All fabrics must be suitable for commercial applications and must meet industry standards. Any
deviation, modification or other changes to the approved original or existing specifications must be
submitted to the appropriate requestor in writing.
• The applicable cleaning codes and cleaning techniques shall be included in the information provided
with all quotations.
Finish Requirements
• Soil Release, Upholstery Fabrics: ASTM D1308-CFFA 141 ≥4.5 Permanent finish such as
Nanotex, Crypton, ALTA or INCASE
• Ink Resistant: Ink resistant finishes are recommended for chair seats
• Backing: Backing is highly recommended and should be suitable for the use intended. Acrylic
backings are generally acceptable for most uses. Knit or other stronger backings may be required for
loosely woven fabrics based on its intended use.
• Flame Treatments: Marriott does NOT accept topical flame retardant finish
Coated Fabrics – Performance Specifications
Packaging
All rolls shall be wrapped sufficiently to protect them during shipment. The cost of covering the rolls is
to be included in the cost of goods. Dependent upon quantity, the rolls shall be loose or on pallets.
The packaging method shall meet or exceed the NMFC regulations for strength as required for
shipments via common carriers. All rolls will be labeled in accordance with Marriott International
labeling instructions.
2
Marriott Global Design Product Guidelines
Luxury Vinyl Tile (LVT)
The following are the specifications and codes for all Luxury Vinyl Tile and Underlayment Products for Marriott
International NALO properties. Any deviations, modifications or other changes must be submitted to the appropriate
specifier in writing with drawings clearly showing all changes and location on the items. All Luxury Vinyl Tile and
Underlayment Products must meet or exceed these specifications and codes. Suppliers are responsible for the
structural integrity and durability of the construction through the life cycle that is needed for a specified program and
the suppliers warranty. The specifier is responsible for fully explaining the end usage so the Luxury Vinyl Tile
supplier may recommend Color, Gloss and Embossing/Pattern choices best suited to the application.
Overview: Printing processes used in the development of Luxury Vinyl Tile provide a realistic visual. The ability to
replicate the look of hardwoods and stones using this advanced photographic technology is a key benefit of Luxury
Vinyl Tile (LVT) flooring systems. A high performance clear wear layer provides durability necessary for commercial
environments. Available in tile or plank format, LVT is comfortable under foot, water resistant and easy to clean and
maintain.
ASTM has industry standards for resilient flooring. The Vinyl Tile category includes: VCT (Vinyl Composition Floor
Tile) and SVT (Solid Vinyl Tile). The term LVT (Luxury Vinyl Tile) is not recognized as a separate flooring category
by ASTM however it falls under the SVT category due to the amount of vinyl or binder content. SVT products have
34% or higher vinyl or binder content and VCT products have less than 34%. LVT products have 34% or higher
therefore, it falls under the SVT category.
There are multiple layers to LVT flooring that are fused together:
• UV Cured Urethane, Acrylic, or Aluminum Oxide Top Coat Layer – Provides stain and abrasion resistance
and adds durability
• Wear Layer(s) – Protects the design and adds long lasting appearance retention, measured in mils
• Decorative Film Layer – The design and color layer
• Core and Backing Layer(s) – For dimensional stability, impact resistance and durability
Marriott requirements are listed below the LVT Guidelines along with information regarding ASTM Test
Codes and Parameters, and Certifications.
When selecting your LVT flooring, there are design guidelines to consider for long lasting appearance retention.
Similar to carpet not being stain-proof, LVT flooring is not scratch-proof or scuff-proof. Generally when designing a
carpet we stay away from solid colors and light colors. We often add texture and design using multiple colors to
mask any soiling or staining, LVT is no different.
• Embossed surfaces are best to mask scratches and scuffs, smooth surfaces will show all scratches
• Variations in color are best to mask scratches and scuffs
• Darker, solid colors naturally show more scratches and dirt and require more maintenance
• Lighter, solid colors naturally show more scuffs and dirt and require more maintenance
LVT Installation Guidelines – Commercial
Installation methods are dependent upon the environment the product is being installed. The specifier is
responsible for fully explaining the end usage so the Luxury Vinyl Tile supplier can recommend the best installation
method best suited to the application.
• Floating (Acoustically quiet, easy and quick to install or replace, must maintain a 5/16” expansion around
perimeter of room to allow the product to move)
o Locking System/Clic Joint, No Adhesives Required, Can be installed with or without Underlayment,
Can be used in a bathroom with a silicone caulk around perimeter and toilet
Proper acclimation of flooring materials and adhesives MAY be necessary. Vinyl contracts when cold and expands
when warm. It is important to make sure temperature conditions are stabilized before and after installation. Refer
to suppliers instructions before installing.
Subfloors must be dry, firm, smooth, level, clean and dust-free. Subfloor preparation must comply with ASTM F710
(Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring) or other applicable National
Standards & Building Codes for the installation of LVT flooring and in strict accordance with the suppliers installation
guidelines. Moisture testing according to ASTM F1869 and Relative Humidity testing according to ASTM F2170,
must be performed in advance of any installation. Proper installation will protect and extend the life of the flooring.
Clean floor to remove any dirt, dust and loose debris from jobsite post installation. Cover the floor with construction
paper, cardboard boxes, or masonite sheets to protect from traffic from other trades while furnishing the areas.
When moving furniture/heavy objects, always lift and carry across the floor, never slide them over the surface.
Always use the proper glides, carts, or furniture protectors.
Underlayments are required by Marriott for better sound abatement above the minimum requirements listed
below. Some suppliers have the underlayment already attached to the LVT and some offer their own separate
underlayment that is compatible with their LVT. The specifier is responsible for fully explaining the end usage so
the LVT supplier can recommend the underlayment choices best suited to the application and the product.
Follow the Suppliers recommended Care and Maintenance Guides for Routine Maintenance. Proper care and
maintenance will protect and extend the life of the flooring.
Preventative Maintenance:
• Always protect floors when moving heavy objects to prevent permanent scratches.
• Use appropriate furniture protectors under tables, chairs and heavy furniture to prevent scratching and
indentations. Chair glides, felt pads and stainless steel glides are recommended.
• Walk-off mats should be used at all entrances from the outside to absorb moisture, soil and debris.
• Avoid exposure to long periods of intense, direct sunlight.
• Do NOT use ball type castors as they can damage the floor. Castors must be easy swiveling. Use
minimum of 1” wide or more furniture protector with rounded over edges. Clean up spills immediately.
Luxury Vinyl Tile (LVT) Minimum Specifications (Must meet or exceed)
• Class: ASTM F1700 Composition of Material: Class III Printed Film Vinyl Plank or Tile,Type B (Embossed)
o Size/Squareness: ASTM F2055 +/-0.016 in. per linear foot in size / <0.010 in. for squareness
o Thickness: ASTM F386 +/- 0.020 in. (0.5mm)
o Dimensional Stability: ASTM F2199 < 0.020 in. per linear foot max
o Residual Indentation: ASTM F1914 <8% of total thickness
o Flexibility: ASTM F137 <1.0 in. diameter, no cracks or breaks
o Chemical Resistance: ASTM F925 No more than slight change in surface dulling, attack or color
change
o Heat Resistance: ASTM F1514 <8 color change
o Light Resistance: ASTM F1515 <8 color change
• Wearlayer Thickness: Marriott requires a minimum of 20 mil (0.5mm) thickness. The wearlayer is a
heavy clear vinyl film of vinyl covered with a UV Cured Urethane, Acrylic or Aluminum Oxide wearlayer for
better scuff, stain and scratch resistance.
• Overall Thickness: Marriott requires a minimum of 4mm or above for all areas
• Backing Class: Commercial Grade
• Finish: UV Cured Urethane, Acrylic or Aluminum Oxide Layer provides additional scuff, stain and scratch
resistance during the early life of the floor.
• Acoustic Ratings: A “Marriott IIC Sound Test” currently underway at Intertek labs
o Impact Insulation Class (IIC): Marriott lab requirements are pending
o Field Impact Insulation Class (AIIC): ≥ 55
• Static Load Limit (PSI): ASTM F970 >250 is the standard for light commercial. Marriott requires 750 or
above.
• Critical Radiant Flux: ASTM E648 Class I: >0.45 watts/sq.cm (The higher the wattage value, the more
heat and time required for the product to support a flame.)
• Smoke Density: ASTM E662 <450
• Slip Resistance: ASTM D2047 >0.5 ADA Compliant
• Warranty: 20 yr Commercial Warranty for Guestrooms and 10 yr Commercial Warranty for Public Space
• Edge Profile: Square or MicroBevel
• Installation: Glue Down or Floating with a Clic/Locking Mechanism
• Adhesive: Supplier/Manufacturer approved adhesive for LVT and Underlayment
• Underlayment: Supplier/Manufacturer approved Underlayment for specified LVT or must be already
attached
• Raw Materials: Must use virgin raw materials unless recycled stream can be clearly identified
• Certifications: FloorScore (Required), GreenGuard Gold, or Green Label Plus
• Must not contain Ortho Phthalates or any other chemicals listed on California’s Proposition 65 List of
Chemicals.
Codes and Test Parameters
ASTM F1700, Class III, Type B (Embossed). The ASTM F1700 establishes the material and performance
characteristics that determine serviceability and recommended applicability of solid vinyl floor tiles intended for use
in commercial, light commercial, and residential buildings. Floor tiles shall be classified as Class I for monolithic
vinyl tiles: Solid color tile with no backing, Class II for surface-decorated vinyl tiles: Usually inlaid with backing, and
Class III for printed film vinyl tiles: Photographic print film with a clear vinyl wearlayer and a backing system.
Furthermore, these classes of tiles shall be subgrouped as Type A for smooth surfaces, and Type B for those with
embossed surfaces. The tiles shall be composed of binder, filler, and pigments compounded with suitable lubricants
and processing aids, the composition for all of which shall be dictated by their respective classes. When tested, the
tiles shall adhere to the following physical requirements: binder content; dimension including size, squareness
(ASTM F2055), thickness (ASTM F386), dimensional stability (ASTM F2199); residual indentation (ASTM F1914);
flexibility (ASTM F137); resistance to chemicals (ASTM F925); resistance to heat (ASTM F1514); and resistance to
light (ASTM F1515). The following requirements must be met to receive the ASTM F1700 certification. If the binder
content is 34% or more it is considered either SVT or LVT flooring. If the thickness of the wearlayer is 20 mils or
more it classifies the Class III product as Commercial. Type B, Embossed is preferred.
o Size/Squareness: ASTM F2055. Both dimension and squareness of resilient floor tile are important
considerations, because installed flooring may exhibit an objectionable appearance when either or both
characteristics deviate from established tolerances. This test method provides a means of determining
actual dimensions (both length and width) and squareness by using a single apparatus and procedure. It is
intended for use with square tiles ranging from a nominal 9 inches to 40 inches in dimension. +/- 0.016
inches per linear foot in size and <0.010 inches for squareness.
o Thickness: ASTM F386. This test method covers the determination of thickness of resilient non-textile
floor coverings including tile and sheet having flat surfaces. Should not be used on materials having a
foamed layer. As specified +/- 0.005 inches.
o Dimensional Stability: ASTM F2199. This test method covers the determination of the change in linear
dimensions of resilient floor tile after exposure to heat. Linear change requirements 0.020 in./lf max.
o Residual Indentation: ASTM F1914. Standard test method to determine the indentation recovery
properties of resilient flooring. It covers the “short term indentation” from foot falls, heels, sitting in a chair,
etc., and measures after a load of 250 psi is applied to the flooring for a period of time after which the
product's thickness is calculated and the recovery is compared to original after 60 minutes.
o Flexibility: ASTM F137. Flexibility is the property of a material which allows it to be deformed by bending
or rolling without cracking, breaking, or other permanent defects, using whatever force is necessary to bend
or roll it. It is an important characteristic of flooring in that it provides for ease of handling in rolling, cutting,
and fitting. This test method covers the determination of the flexibility of resilient flooring materials by
means of Cylindrical mandrel apparatus.
o Chemical Resistance: ASTM F925. Resilient flooring products are designed and formulated to have
good resistance to most common chemicals encountered in typical use. High performance wear layers can
also be used to enhance cleanability and chemical resistance. Performance is dependent upon the flooring
formulation and that of the maintenance products used on the flooring. This test method provides a means
of estimating the relative susceptibility of resilient floor covering to change when exposed to chemical
reagents. It is not intended as a staining test. Catgories for rating are surface dulling, surface attack and
color change.
o Heat Resistance: ASTM F1514. Resilient floor covering is made by fusing polymer materials under heat
or pressure, or both, in various manufacturing processes. The polymer material may be compounded with
plasticizers, stabilizers, fillers, and other ingredients for processibility and product performance
characteristics. The formulation of the compound can be varied considerably depending on the desired
performance characteristics and methods of processing. Heat stability, which is resistance to discoloration
from heat, is a basic requirement for processing and functional use. This test method provides a means of
measuring the amount of color change in flooring products when subjected to elevated temperatures over a
period of time (functional use of the flooring product). It is not intended to be a means of predicting the
amount of color change that occurs during processing (manufacture).
o Light Resistance: ASTM F1515. Light stability, which is resistance to discoloration from light, is a basic
requirement for functional use. This test method provides a means of measuring the amount of color
change in flooring products when subjected to accelerated light exposure over a period of time (functional
use of the flooring product). It is the intent that this test method be used for testing light stability
performance properties to be referenced in resilient flooring specifications.
Codes and Test Parameters continued
Acoustic Ratings: IIC ASTM E492. IIC stands for Impact Insulation Class. It is defined as a single number rating
derived from the normalized impact sound pressure levels through a floor ceiling assembly. The sound source is a
standard tapping machine through which sound pressure levels radiate off the bottom of the assembly into a
receiving room and are then normalized for the rating calculation. STC ASTM E90. STC stands for sound
transmission class. It is defined as an integer-number rating of how well a building element reduces airborne sound.
It is a calculation based on transmission loss values through an element. Transmission loss is the measurement of
the noise reduction in individual frequency bands from a source room containing noise to a receiving room
containing a microphone. The transmission loss values are also corrected for room absorption on the receiving side.
The ASTM tests for both are performed using the same floor system, 6” concrete slab with a ceiling plenum. Every
floor and underlayment combination will achieve different results. It is very difficult to predict what results a
particular floor will get. Typical results for the system range from the mid 50s to the low 60s in IIC rating. Typically
carpets will get much higher ratings. Marriott will be testing different systems and will be posting the results
and minimum requirements soon.
Static Load Limit (PSI): ASTM F970. Standard test method to determine the indentation recovery properties of
resilient flooring. The reported value, residual indentation of the “long term indentation”, is the depth of the
depression remaining 24 h after removal of the specified load. The pass/fail criterion is a residual indentation of no
greater than 5 mils. The tests are performed on uninstalled products. Few objects within a commercial environment
exceed 750 PSI. ASTM product specifications do not cite a static load requirement higher than 250 PSI for any
product specification covering the category of resilient flooring.
Slip Resistance: ASTM D2047. Standard test method covers the use of the James Machine for measurement of
the static coefficient of friction of polish-coated flooring surfaces with respect to human locomotion safety. Further,
this test method also establishes a compliance criterion to meet the requirement for a nonhazardous polished
walkway surface. Polishes and other floor maintenance coatings having a static coefficient of friction of not less
than 0.5, as measured by this test method, have been recognized as providing nonhazardous walkways. It is not
intended for use on “wet” surfaces wherein the texture, projections, profile or clearance between the sculptured
pattern of the surface does not permit adequate contact between the machine foot and the test surface. Coefficient
of friction is tested clean and dry with a leather sensor pad.
Critical Radiant Flux: Class I ASTM E648. Standard test method designed to identify the critical heat flux of
mounted floor covering systems. The tested material is exposed to a flaming ignition source to simulate thermal
radiation levels that the material may be exposed to due to fire and/or smoke radiation. A CRF of 0.45 watts/cm2 or
more, Class I Rating.
Optical Smoke Density: ASTM E662. Standard test method for specific optical density of smoke generation of a
light beam by smoke (With the exception of New York City, very few jurisdictions require this test), maximum
specific Optical Density of 450 or less, Class I Rating.
Certifications
FloorScore. This is a Marriott Requirement. FloorScore tests and certifies all hard surface flooring and flooring
adhesive products, ensuring they meet stringent indoor air quality emissions requirements: the emission level of
specific volatile organic compounds (VOCs). The program was developed by the Resilient Floor Covering Institute
(RFCI) in conjunction with Scientific Certification Systems (SCS). FloorScore conforms with USGBC LEED criteria
for EQ4.3 (carpet systems, flooring), and California 01350 Special Environmental Requirements. The FloorScore
seal tells you that the products have been independently tested and certified by SCS Global Services (SCS) and
meets the volatile organic compound emissions criteria of the California Section 01350 standard.
GreenGuard Gold. The GREENGUARD Gold standard includes health based criteria for additional chemicals and
also requires lower total VOC emissions levels to ensure that products are acceptable for use in environments such
as schools and healthcare facilities. In addition to limiting emissions of more than 360 VOCs and total chemical
emissions, GREENGUARD Gold Certified products must also comply with requirements of the State of California's
Department of Public Health "Standard Method for the Testing and Evaluation of Volatile Organic Chemical
Emissions from Indoor Sources Using Environmental Chambers, Version 1.1 (2010)" (aka California Section
01350).
Green Label Plus. The Green Label Plus program tests carpet, cushions and adhesives to help the specifiers
identify products with very low emissions of VOCs. This program sets an even higher standard than Green Label for
IAQ and ensures that customers are purchasing the very lowest emitting products. For the adhesives, and
independent laboratory tests adhesives for emission levels for chemicals as required by Section 01350, plus other
chemicals as required by CRI.
Marriott Global Design Product Guidelines
Decorative Mirrors
Decorative mirrors must meet or exceed the following specifications. Deviations or
modifications must be submitted in writing with a drawing, clearly and specifically detailing each
deviation and location of the detail. Supplier is responsible for the structural integrity and
durability of finish and design of any mirror produced. Supplier is to provide shop drawings and
finish samples for all custom mirrors. Supplier is to obtain approval prior to production of
custom mirrors.
Glass/Mirror
Clear 5mm glass is to have three layers of metals, sealed by a layer of paint. The glass is to
have a fully applied layer of tin. Tin layer is to have a full application of silver. Silver layer is to
have a complete application of copper. The copper layer is to be completely sealed with a layer
of organic paint. Mirrored glass must meet the Federal Standard Mirror Specifications, DDM-
411C.
Frames - Wood
Wood frames will be milled, machined, or carved from hardwoods and softwoods, as specified
to achieve structural integrity and aesthetic requirements. All woods are to be kiln dried and
register not greater than 9% moisture content for hardwoods and not more than 12% moisture
content softwoods, prior to matching. Wood must not exhibit surface defects of flaws. Loose
knots and knotholes are not acceptable.
Frames - Urethane
Frames are to be of rigid polyurethane with a consistent density of twenty pounds per cubic foot
(+/-) two pounds. Polyurethane is to be manufactured without ozone depleting materials (CFC’).
Frames - MDF
Engineered wood made from refined wood particles 6% resin made into hardboard. Use wrap
grade double refined only.
Joints
All corners are to be miter cut, glued and joined with pneumatic “V” nail joining equipment. The
placement of the “V” nail will be suitable to ensure the structural integrity of the joint. In no case
will there be less than two “V” nails per joint or less than one “V” mail per inch of molding width.
Backing
All mirrors must have a backing for stability. Backing is to be recessed so as to be flush with the
back of the frame. Unless otherwise approved, backing is to be 1/8” plywood.
Finishes
Finishes will meet AWI (Architectural Woodworking Institute) system TR1 for hand applied
finishes. Finishes must have proper, permanent adhesion. Finish is to be protected with both
chemical and abrasion resistant topcoats, per ASTM standards. All corners must be
cosmetically blended and retouched to eliminate visual discontinuity across the joint on both
face and sides of frame. Visible raw wood/polyurethane is not permitted. Production finishes
must be consistent with the pre-approved finish sample. Must be sealed if sprayed or painted.
Foiling and wrapped finishes are acceptable.
Security Hangers
Unless otherwise specified, all mirror must have 3 point security hardware hanging method with
security locking. Mounting/Security hardware will be attached to the back of the mirror, with the
matching wall mount portion packaged and securely fastened to the back of each individual
corresponding piece. Security hardware is to be mounted in the same position on each style
and detailed on the approved shop drawings.
Packaging
All items are to be cartoned. The cost of cartoning is to be included in the cost of goods.
Mirrors are to be wrapped in plastic or foam and then fitted with corner protectors.
All wall hardware is to be attached to the back of each piece. Depending on size, mirrors may
then be placed in a master carton (edge crush test to withstand a minimum of 275 lbs.)
Packaging material must be used to alleviate any movement of the mirrors inside the master
carton.
The master carton must then be placed on a pallet and secured with a strap and shrink-
wrapped.
All cartons will be labeled in accordance with MIDCS labeling instructions.
Warranty
All items containing hardwood plywood, particleboard, or medium density fiberboard shipped
into California must be in compliance with 93120-93120.12, title 17, California Code of
Regulations regarding reducing formaldehyde emissions.
2
Marriott Global Design Product Guidelines
Outdoor Balcony and Pool Furniture
The following are the guidelines for outdoor balcony and pool furniture used by Marriott International.
Any deviation, modification or change, must be submitted in writing to the client. Supplier is responsible
for the structural integrity and durability of finish for all outdoor furniture produced. Supplier is to
provide shop drawings and samples for all custom outdoor furniture as required. Supplier is to obtain
approval prior to production of all custom outdoor furniture.
General Requirements
• Glides and Caps - Provide replaceable nylon glides and frame caps for all
chairs, chaise lounges and tables secured with stainless steel rivets.
• Stretchers - include where necessary to provide support (1.5 mm (1/6 inch) minimum.
• If arms are used, they shall be braced with vertical supports.
• The latching bar to move the back of the chaise shall be recessed and
positioned so as to avoid injury. S h o u l d be weighted if intended for use
in windy areas.
• The back legs of chaise lounges shall have fillers to minimize tipping.
• Straps: 100% virgin vinyl or injection molded vinyl, .11" minimum
thickness, with ultraviolet stabilizers and mildew inhibitors. Straps should
be attached to frame with a double wrap, secured with a nylon rivet.
• Stacking Chairs – minimum of 4 to a maximum of 6
Cushions
• Cushion cover fabric s h a l l b e exterior contract commercial quality solution dyed acrylic that
is resistant to fading, mold/mildew water, food stains, dirt and sunscreen products for a
m i n i m u m o f 7 years from installation.
• Fabrics) to include written certification:
• Abrasion Resistance: ASTM D4157 #10 Duck Wyzenbeek: 30,000 double rubs;
• Wet and Dry Crocking: AATCC 8-2001 (except prints) AATCC 116-2001 Dry 5.0, Wet 5
• Pill: SDTM D 3511-02 Class 4.5
• Seam Slippage: ASTM D3597-02 D434-95,35 lbs. warp and fill
• Snag Resistance ASTM D 399003 Minimum rating of 4 .5
• Tensile Strength ASTM D5034-95-2001 (Grab Test) 50 lbs. warp
• Sling Fabrics: Vinyl coated polyester (VCP) or blend of VCP and 100%
acrylic fabrics, with ultraviolet stabiJizers and mildew inhibitors.
• Resin (such as faux wicker or rattan, faux teak): Shall be High Density
Polyethylene with UV inhibitors
Tables
Umbrellas
General
The following are the specifications for task chairs used in Marriott International properties. All task chairs must
meet or exceed these specifications. All Marriott task chair suppliers are responsible for the structural integrity,
durability of finish and design of any task chairs they produce. Each supplier is responsible for providing shop
drawings with complete construction information, including where-used and finished samples for all task chairs.
Any deviation, modification or other changes to original or existing specifications must be submitted to
the client in writing with drawings clearly showing all changes and locations on the items.
Warranty
• All Marriott task chair suppliers are responsible for the functional durability and conformance to design
intent of any task chairs they produce. The chairs shall be warranted for a minimum of six years.
• Surroundings Compatibility. All task chair suppliers shall ensure that the chairs they design will work
with their surroundings without damage to the chairs or their surroundings. All interaction points such as
desk edges, wall, etc., during chair movement shall be examined and measured so as to insure
compatibility. This shall be a joint effort between the specifier, the task chair supplier, as well as desk and
other interaction point suppliers.
• Tilt: The tilt mechanism shall be knee-tilt with locking device in full-upright position only unless otherwise
specified and shall tilt no more than 18 degrees.
• Webbing/mesh: Construction and where used shall be shown on shop drawings or other appropriate
places. The mesh tensile strength and application method shall be sufficient to perform without failure or
sagging over the six-year life of the chair.
o Back
Inner back wood shall be a minimum of ½” thick curved plywood with 1” thickness, minimum
1.2 density CA 117 flame retardant foam over a passive lumbar support.
Outer back wood shall be a minimum of 1/8” non-tempered hardboard covered with ¼” CA
117 foam. Fasteners shall not be exposed.
o Seat
Minimum 5 plies; 7 or 9 preferred and a minimal number of unused holes to prevent
structural weakness.
The seat shall be connected to the back sufficiently with a metal plate to prevent failure over
the minimum six-year life of the chair.
• Cardboard, chipboard or other support material. Construction and where used shall be shown on shop
drawings or other appropriate places.
2
• Seams.
Seams shall be of sufficient depth and stitches shall be within industry standards with a minimum yield
(grab) of ½”, or greater if necessary to minimize seam slippage.
Thread used in stitching is to be of sufficient quality for contract use.
Double needle stitching shall be used with tape on the back and is most often design intent. However,
it is also to be used in areas where reinforced seams are needed due to tensile load or where extended
load-bearing strength is needed.
Welts are to be applied relative to their location. For cushions, welts shall always be sewn into the
fabric so that they are an integral part of the seams. For welts between the seat and seat rail, a welt
groove shall be cut into the frame and the welt must be secured in the groove sufficiently to remain in
place over the minimum six-year life of the product. The grooves shall be cut so that they do not affect
the structural integrity of the chair over its life. For outside backs of chairs, the welt may be glued or
stapled, provided the staples are not visible.
• Stationary Base and Chair Control: The stationary base and chair control shall be sufficient to perform
without failure throughout the life of the chair. The self-centering swivel/tilt chair control which is attached
to the base shall return the chair to its starting position.
• Gas Cylinders: Class III shall be used: WDF, MDI, KGS, SHS, Suspa or equals, and the range of travel
shall be specified.
• Moving parts shall be properly graphite-lubricated. The metal surfaces of the mechanisms shall be
smooth and finished with the appropriate finish. The materials used shall be free from hazardous surfaces,
rust, and other defects which affect appearance or which might affect the safety of the use, the durability or
the serviceability of the finished mechanisms.
• Metal
Steel tubing shall meet ASTM A-513 for 1008/1010; wall thickness for 18 gauge tubing shall be .049, ±
10% Carbon.
Chemical analysis of steel tubing: Carbon: .054 to .11 Manganese: .30 to .60 Phosphorous: .035 Max.
Sulfur: .035 Max. Rockwell Hardness: B45 to B75.
All exposed ferrous metals shall have a corrosion resistant finish or the manufacturer’s best
commercial coating. The finish shall produce a finished chair satisfactory in function and appearance.
Metals shall be pre-treated for corrosion resistance and to enhance finish adhesion.
The finish shall be epoxy powder coat or plate.
All production finishes must match approved samples.
Finishes are to be clean and clear in tone, smooth and without variation between any sides.
3
• Star Base. The star base shall consist of five (six legs for heavy duty) with a metal ring set into the hub to
prevent excessive cylinder “creep” (to prevent the chair from settling more than ¼” after break-in). Glass
filled nylon bases shall have a web or honeycomb structure underneath the legs. Metal bases shall have
longitudinal and latitudinal ribs to prevent twist. High profile metal bases shall have solid tubular or legs
drawn into a deep U-shape. The base assembly shall be free from wobble when moved in any direction.
• Caster selection is dependent upon the type task chair and where it is to be used. The typical twin-wheel
nylon caster shall be 50mm to 60mm (2” to 2.4”) with an 11mm pintle (stem, .4”) Phenolic casters may be
specified for thick-pile carpeted areas or for executive chairs, but they shall not be used on vinyl floors.
Soft polyurethane treads, and minimum 3” diameter caster shall be used on chairs that will be used on
wood or LVT floors. Casters shall be ball bearing swivel. Caster hood and scuff plate finishes shall match
each other. Dual wheel casters shall carry the same specification requirements as single wheel. Casters
shall be capable of functioning without failure over the minimum six-year life of the task chair under the
maximum load-bearing weight of guests.
• Approval: Acceptability of “ride”, firmness, padding, pitch and comfort will be determined during the
development phase.
• Tolerance: Overall width, depth and height: ± ½”; Height of arms from seat: ± ½”; Dimensions of wood
parts: ± ½”; Dimensions of upholstered parts: ± ½”; Dimensions between arms: ± ½”; Contour of bent arm
from top of arm to the rail: ± ½”; Depth of seat: ± ½”.
Packaging
• All items shall be cartoned unless an approved alternate has been authorized. The cost of cartoning is to
be included in the cost of goods. All items shall be wrapped in commercial grade plastic bags prior to
cartoning.
• Cartoning shall meet or exceed the National Motor Freight Classification regulations for strength as
required for shipments via common carriers. Sufficient cushioning shall be inserted in the bottom of the
carton to absorb shock during shipment.
• Task chairs may be packed two per carton and corner blocks are required to prevent damage to the
casters or any part of the chair if the task chair is shipped with casters installed. All cartons shall be
labeled in accordance with Marriott International labeling instructions when ordered by MIDCS.
Test Requirements
Task chairs shall be tested and certified to Business and Institutional Manufacturers’ Association test
BIFMA X5.1-2011, unless there is a more recent version of the test applicable at the time of the purchase. Consult
the BIFMA Test above for full criteria and Illustrations.
Fire Code: Chair components shall be tested and chairs shall be labelled to pass CAL117-2013 and any other
applicable local code.
• Abrasion Resistance, All Decorative Fabrics: Wyzenbeek: 50,000 Double Rubs for Task Chair Fabrics,
ASTM D4157-02; Back and Forth Motion, #10 Duck; 62,500 if Martindale, ASTM D4966-98; 12 KPa
pressure; Circular Motion, #10 Duck;
If Polyurethane is used, the use of PU whose main component is polycarbonate, without a foam layer,
is highly recommended. Hydrolysis performance listed below.
PVC’s shall be phthalate free
All upholstered products must meet or exceed these specifications. All Marriott upholstered seating or related
product suppliers are responsible for the structural integrity, durability of finish and design of any upholstered
product they produce. Each supplier is responsible for providing shop drawings with complete construction
information, including where-used and finished samples for all upholstered products.
Tolerances
• Overall width, depth and height: ± ½”; Height of arms from seat: ± ½”; Dimensions of wood parts: ± ½”;
Dimensions of upholstered parts: ± ½”; Dimensions between arms: ± ½”; Contour of bent arm from top of
arm to the rail: ± ½”; Depth of seat: ± ½”.
Wood
• All wood shall be seasoned, kiln dried to moisture content of 7% - 9% and worm free number one solid
lumber.
• Load bearing frames: Solid frame grade hardwoods: Maple, birch, oak, poplar or solid hardwood plywood.
(Alder may be used but must be approved in advance)
• Non load bearing supports may be hardwood.
• Finished, exposed wood: Maple, mahogany, Beech, European Beech, cherry, oak. (Alder may be
acceptable in certain chairs but must be approved in advance)
• Exposed Wood surfaces shall be free from defects and corners shall be sufficiently eased so as to avoid
sharp impact points.
• Curved frames shall be steam bent hardwood with kiln dried hardwood used in non-curved major frame
components. (Solid hardwood glued face-to-face, or hardwood plywood, band sawed or steam bent is also
appropriate for curved frames. The number of plies shall be determined by the application and shall be
sufficient to perform without failure. The number of plies shall be clearly identified in your specifications)
• Where possible, and without affecting costs, of the species listed, SFI (Sustainable Forest Initiative) lumber
shall be used.
• All finish undercoats are to be sanded smooth and sharp edges softened.
• All finishes shall be conversion varnishes, catalyzed lacquer or polyurethane, tested and warranted for
commercial use. If available, polyurethane shall be used in public spaces.
Frames
• Stretchers shall be used on all dining, counter or bar stools and desk chairs to provide support to the legs.
Stretchers shall be appropriately placed so as to perform without breakage. If the design indicates they will
act as foot rails, then they are to be designed as foot rails. All applications shall be constructed to perform
based on the intended use.
• Webbing construction and where-used shall be shown on shop drawings and it shall be sufficient to
perform based on the intended use.
• Cardboard, chipboard or other support material: construction and where-used, to be shown on shop
drawings.
• Upholstered seat and back supports shall be sinuous springs but webbing may be used when appropriate
for the type chair or piece specified. Seat springs shall be 8 gauge sinuous wire and back springs shall be
11 or 12 gauge sinuous wire. Springs shall be attached to upholstered frames using noise-abating coated
and lateral stabilizing wrapped edge wire, 2 oz. polyester insulator steel clips. Seat back sinuous springs
may be stapled to the frames without clips. Springs shall be of sufficient number and to be offset to ensure
even weight distribution during use and guaranteed to prevent sagging. A woven synthetic material shall
be used to cover back springs with foam applied on top.
• All joints shall be double-dowel or mortise-and-tenon construction with corner blocks (gusseted and
screwed or lag bolted where appropriate).
• Metal fasteners are to be used where appropriate to ensure commercial frame strength.
• Seat suspension shall be no-sag (95% memory for 5 years) 8-gauge sinuous coil wire tied with 16 gauge
fiber wire. .
• Chair cushion-backs shall be constructed with 10 to 12 gauge no sag sinuous wire with 1 oz. heavy-duty
compressed low-melt fiber covered on sinuous springs.
• Padding shall be sufficient to insure that face fabric does not touch wood or other support material at any
point.
• Specify padding type and composition or density: 1) 85/15 gin flues cotton, 2) polyurethane of appropriate
density and IFD, 3) Heavy-duty compressed low-melt fiber, at least 1.5 oz. shall cover Sinuous springs.
Universal springs to have lifetime guarantees 4) perma-firm deck insulator (bonded felt fiber)
• Arm panels and other high impact points shall be sufficiently padded to prevent impacts from damaging
face fabrics, vinyls or polyurethanes
• Public Space: All foam used for seat cushions shall have a minimum density of 2.5 lbs per cubic foot for
seats, 1.5 for backs. All foam shall pass the requirements of California Bulletin 117-2013. Foam shall be
covered in a one ounce layer of Dacron (or equal) batting.
• Rooms: Same as public space except the seats shall be a minimum of 1.8 density per cubic feet, 24-28
ILD foam, Dacron wrapped. A sample chair shall be constructed for approval to verify the appropriate
density and compression of the foam, considering the length of cushion, type of cover fabric and intended
use.
• Inside arms shall be reinforced with cardboard or synthetic woven webbing padded with one inch of foam.
(For certain applications, ½” foam is acceptable if required to achieve a specific style or look provided it
does not produce issues such as insufficient padding for comfort or fabric wear protection) Outside arms
shall be covered with synthetic woven fabric covered by face fabric.
• Outside back shall be micro foam padded and covered with fabric.
• All seat cushions must have a system for venting air when the cushion is compressed by seated guests;
grommets or other systems will suffice provided they do not negatively affect structural integrity especially
with the restricted airflow when using leather, PVC, Durablock or a moisture barrier
• If the cushions are semi attached, the construction must be such that the cushions maintain their
appearance and function.
• The upholstered products supplier is responsible for insuring that all internal foam, batting, or other
components subject to CA-117-2013 fire code are in compliance. The supplier is also responsible for
insuring that all upholstered products meet local code where applicable.
• The upholstered products supplier is not responsible for face fabric construction and performance of face
fabric selections provided by others but the upholstered supplier is responsible for construction and
performance of face fabrics selected by the upholstered supplier. In all cases the upholstered
products supplier is responsible for diligence in identifying defective fabrics, in halting production and
informing the Purchasing Agent.
• All upholstered products suppliers are to fully insure complete understanding of the direction the designer
wants directional fabrics to take on the piece; side-to-side or floor-to-back.
• It is the supplier’s responsibility to insure that all pattern matching is appropriate and utilizes the best
yields. Suppliers shall notify the Designer or Purchasing Agent if there are ways to have better fabric
yields.
• All tailoring is to be smooth and fabric evenly applied.
• All fabric shall cover all exposed wood on the interior frame when guest facing.
2
Flaps
• All flaps are to be lined with 78 x 44 market cloth and added buckram where needed for stiffness.
• An 8” to 10” flap shall be affixed at the leading edge of the seat surface to lay over the leading edge of the
sleeper mechanism when it is stored in the sofa.
Seams/Stitches
• Seams are to be sufficient depth with a minimum yield (grab) of 1/2”, or greater if necessary to minimize
seam slippage.
• The stitches per inch generally range from 7-10 with most fabrics performing well at 7-8, however, some
fabrics require an 8-10 stitch. That determination will be the responsibility of the seating supplier based on
the type of fabric. Thread used in stitching is to be of contract quality. Double Needle stitching, sometimes
called “Baseball” Stitching, is generally used in concert with tape on the back and is most often design
intent. However, it is to also be used in areas where reinforced seams are needed due to tensile load.
• General Characteristics: The characteristics of a properly constructed sewn seam are strength, elasticity,
durability, security, and appearance. These characteristics must be balanced with the properties of the
material to be joined to form the optimum sewn seam. The end use of the item will govern the relative
importance of these characteristics. The selection of the seam type and stitch type should be based upon
these considerations.
• Welts are specified for design intent and should be applied relative to their location. For cushions, welts
are always sewn into the fabric and are an integral part of seams. For welts between the seat and seat
rail, a welt groove is cut into the frame and the welt must be secured in the groove sufficiently. For outside
backs of chairs, the welt is most often stapled to the back.
• Leggett and Platt Classic Square 3500-16 or Hickory Springs 9002 Sleeper with the 'Fall-Away Cross Bar.
The sleeper shall be constructed sufficiently to prevent sag and must be guaranteed by the supplier to
remain solid over the life of the sleeper. The mechanism shall have an operating instruction label in
English and Spanish permanently affixed to the webbing. Alternate products must be submitted with
detailed specifications, and approved prior to use.
• Commercial contract Nylon or silicone glides or equal shall be used on chairs that will be used on carpet.
Chairs intended for use on hardwood shall have stainless steel metal glides with nylon covers. Chairs
intended for use on LVT shall have stainless steel, durable nylon or felt glides depending on use intended.
Felt shall not be used on chairs that will be moved frequently. (In general, all glides shall be suitable for
use on the floor surfaces on which the chairs will be used)
Metal
• All exposed ferrous metals shall have a rust and corrosion resistant finish. They must have durable clear
enamel matte coating, clear rust inhibitor, baked enamel or powder coated finish to prevent rust and
corrosion. The finish shall be approved prior to production.
Manufacturer to ensure materials are non-corrosive and suitable for use in highly humidity and salt air
locations if required.
Packaging
• All items shall be cartoned unless an approved alternate has been authorized. All items shall be wrapped
in 2 ml. Plastic bags prior to cartoning. Cartoning shall meet or exceed the NMFC regulations for strength
as required for shipments via common carriers. Lounge chairs shall be packed one per carton. Desk
chairs may be packed two per carton. Chairs with legs may need to be suspended within cartoning to
ensure safe transit. All cartons will be labeled in accordance with Marriott International labeling
instructions.
Warranty
• All furniture is to be warranted for commercial use for a minimum of six years.
Codes
• CA 117-2013: All components shall pass and the chair shall be so labelled, and chairs shall be tested to
comply with any other local code requirements.
• CARB (California Air Resources Board) Requirements: All items containing hardwood plywood,
particleboard, or medium density fiberboard shipped into California must be in compliance with 93120-
93120.12, title 17, California Code of Regulations regarding reducing formaldehyde emissions.
4
Definitions
5
Marriott Global Design Product Guidelines
Wall Coverings
The following are the specifications, test and code criteria for wall coverings used by Marriott International hotels within
the United States. All wall coverings must meet or exceed these specifications, tests, codes and any other requirements of
local jurisdictions. Each supplier is responsible for providing samples up to and including finished samples. Any deviation,
modification or other changes to original or existing specifications must be submitted to the appropriate specifier in
writing.
Warranty
• All Marriott wall coverings suppliers are responsible for the functional durability and conformance to design intent
of any wall coverings they produce. The products are to be warranted for a minimum of 6 years or as specified.
General Specifications
• Material: The construction of the material is to be clearly identified and agreed upon between the specifier and
the supplier; vinyl, polyurethane or paper.
• Re-Cycled Content: Any re-cycled content is to be clearly identified with the percent content of pre-consumer and
post-consumer material.
• Roll Sizes: The roll sizes of each specified product is to be agreed upon by the specifier and supplier and is to be
clearly noted on the quotation.
• Unit-of-measure: The unit-of-measure shall always be in linear yards and the usable width in inches shall be clearly
noted for each specified product.
• Tolerance: Overshipment tolerances are to be clearly noted on each quotation, except for Marriott prototypical
items, which shall be limited to up-to-the-next-full roll to fill orders.
• Pattern: The pattern name and number, color name and number and film base color shall be clearly noted. It is
critical that patterns are developed that facilitate commercial installation speed. Geometrics that match
horizontally are to be avoided if possible unless the pattern is designed such that it can be installed at commercial
speed. It is the wall covering supplier’s responsibility to inform specifiers in writing of the relative hanging
difficulties of patterns they select.
• Repeats: The supplier shall clearly inform the specifier in writing prior to final selection of any issues with pattern
repeats relative to hanging and appearance.
• Weight Tolerance: Types I and II: 2 ounces above or 1 ounce below per 54” linear yard.
• Flame Retardancy: The flame spread test shall be ASTM E-84 and a rating of Class A is required.
• Backing: The backing shall be agreed upon and will be noted as scrim, Osnaburg, non-woven or other material.
Wovens are preferred due to stretch but if the supplier is restricted to non-wovens due to the pattern, the specifier
is to be informed in writing.
• Embossing Pattern: The embossing pattern is to be agreed upon between the specifier and the supplier. The
supplier shall recommend embossings from light gauge to heavy, {(light: .017 mil. to .021 mil.) (medium: .022 to
.025 mil.) (heavy: .026 to .032 mil)} dependent upon the project, wall covering location and whether or not it is a
new build or renovation project. Embossings selected for renovations typically should be heavier embossed
patterns than those for new build projects due to imperfect walls.
• Inks: Water based inks are preferred but if other types are required due to the design, it is to be clearly noted in
writing along with the reasons for its use and it is to be agreed upon by the specifier.
• Bow and Bias: Tolerance shall be 3/8” or less bow or bias per 54” linear yard normally; less if the design demands
it, as in horizontal geometric designs.
• Film and Print Color Controls: Color standards shall be controlled by computerized systems as well as human
judgment. Computer matching standards such as CieLab shall be used for all film production as well as for printing,
where possible. Final approval or rejection shall be by eye. Color standards that have been approved by the
specifier are to be maintained away from light and are to be updated as needed. These standards are to be used
with each lot produced to insure commercial matches. There shall be no side-to-side shading. Final approval shall
be by eye and shall include hanging 3 drops to be observed from all angles.
• UV Curing: UV curing is acceptable for all applications but the supplier shall recommend it when appropriate and it
shall be agreed upon by the specifier.
• Cleaning: Wall coverings shall withstand spot cleaning using the following process.
Note: When attempting to remove marks from vinyl, always test in an inconspicuous place first. Spray Ecolab Power
Force directly on the mark. Wait and allow several minutes of dwell time. Using a microfiber cloth, gently rub with
the grain of the vinyl starting with light pressure and increasing slightly (if necessary) to remove the mark.
Packaging: Each roll is to have complete storage, handling, preparation and installation instructions enclosed and
all rolls are to be sequentially polyethylene bagged, labeled, and pyramid pallet-packed by lot.
2
Marriott International Test Requirements for Wall Coverings, ASTM F 793-93 Reapproved 2004, Outlined Below
General: Each manufacturer or distributor is responsible for determining conformance of each wall covering to each test
procedure of ASTM F 793-93, reapproved 2004. Statistically valid sample testing is appropriate provided adequate records
are kept that document with a high degree of assurance that all test requirements are met.
2. Washability (The ability of wall covering to withstand occasional sponging with a prescribed detergent solution)
3. Stain Resistance, Test Method D 1308 (The ability of wall covering to show no appreciable change in appearance after
application and removal of specified reagents)
4. Crocking Resistance (The ability to resist transfer of color from a wall covering surface when rubbed): Federal
Standard No. 191, Method 5651-B.
5. Scrubability (The ability of wall covering to withstand scrubbing with a brush and a prescribed detergent solution)
6. Abrasion Resistance (The ability of wall covering to withstand mechanical action such as rubbing, scraping, or
scrubbing that may progressively tend to remove material from the surface.)
7. Breaking Strength (The ability of wall covering to withstand a pulling force in the plane of the web):
Federal Standard No. 191, Method 5100-1.
8. Tear Resistance (The ability of wall covering to resist the propagation of an existing tear):
Test Methods D 751.
9. Blocking Resistance (The ability of wall covering to resist adhesion or sticking between two surfaces that touch under
uniform loading and temperature conditions for a specified time) Federal Standard No. 191, Method 5872.
10. Coating Adhesion (A measure of the strength of the bond between the surface coating and the backing or substrate
of a wall covering): Test Method D 751.
11. Cold Cracking Resistance (The ability of wall covering to resist cracking of the coated or decorative surface when it is
folded during exposure to low temperatures)
12. Heat Aging Resistance (The ability of wall covering to resist deterioration of the coated or decorative surface when it
is exposed to elevated temperatures over an extended period). Federal Standard No 191, Method 5850
13. Flammability (The ability of wall covering to resist the propagation of flame and the development of smoke under
prescribed test conditions): 6-5.1.5.6 of NFPA 101, the Life Safety Code. (E-84)
3
14. Strippability (Wall covering that can be dry-stripped from the wall after having been installed and stripped in
accordance with the manufacturer’s instructions, leaving a minimum of product residue on the wall and without damage
to the wall surface)
15. Mildew Resistance, where specified: (Wall covering that has been treated to deter the growth of mildew on the
decorative surface): Practice G 21
Category IV, Type I Commercial Serviceability: Wall covering manufactured for use where higher abrasion resistance, stain
resistance and Scrubability are necessary in heavy consumer & light commercial use. Category IV wall covering must also
meet crocking resistance, tear resistance, blocking resistance, cold cracking resistance, heat aging resistance & breaking
strength criteria. Wall covering meets Type I performance as defined in Federal Specification CCCW-408C.
Category V, Type II Commercial Serviceability: Wall covering manufactured for use where better wearing qualities are
required & exposure to wear is greater than normal. Category V wall covering must meet high abrasion resistance, stain
resistance, and colorfastness criteria in addition to higher crocking resistance, tear resistance, and breaking strength criteria
than Categories I to IV. Blocking resistance, cold cracking resistance, coating adhesion & heat aging resistance tests also
apply. Wall covering meets Type II performance as defined by Federal Specification CCCW-408C.
Category VI, Type III Commercial Serviceability: Wall covering manufactured for use in heavy traffic areas. Category VI
wall covering must meet the highest abrasion resistance, stain resistance, tear resistance, colorfastness, crocking
resistance, and breaking strength criteria. Blocking resistance, coating adhesion, cold cracking resistance & heat aging
resistance tests also apply. Wall covering meets Type III performance as defined by Federal Specification CCCW-408C.
4
Marriott Global Design Product Guidelines
Window Treatment
The following are the specifications for window treatments used by Marriott International. Any deviation,
modification or other changes must be discussed with the appropriate requester verbally and confirmed in
writing with documents and pictures clearly showing all changes and locations on the items. All window
treatment items must meet or exceed the specifications contained within this document. All Marriott
International window treatment or related window treatment products fabricators are responsible for the
design and functional performance of any window treatment product they provide. If a design allows for
light leakage, it shall be called to the requestor’s attention. Each fabricator is responsible for providing
review samples as needed. All fabricators are responsible for always obtaining approval from the
appropriate requestor prior to starting production.
Fabrics, General
• All fabrics used in window treatment must meet the codes in the next section. (The fabricator is not
responsible for these codes if the fabric is COM).
• If defects are found which will affect production, the purchasing agent shall be contacted
immediately so that disposition of the defective fabric may be worked out.
Fabrics, Codes
• Abrasion Resistance, All Decorative Fabrics: Wyzenbeek: ASTM D4157-02; 20,000 double
rubs back and forth motion, #10 Duck; Martindale, 25,000 double rubs, ASTM D4966-98; 12 KPa
pressure; Circular Motion, #10 Duck; (Although there are no abrasion standards for sheers, they
should be constructed sufficiently to prevent yarn separation during commercial use).
• Flammability, Window Treatment: All items, including drapes, sheers, fabric valances, swags,
jabots, or any other window treatment: NFPA 701-04, Test Method 1 (Vinyl coated blackout, Test
Method 2) and BFD1X-1 Boston, in addition to local jurisdictional requirements. (Custom one-off
window projects do not need BFDIX-1 if NOT used within the city limits of Boston). This
treatment MUST be inherent, not topical. All BFDIX-1 items require a permit from the Boston Fire
Department: To get Boston Permits, go to http://www.cityofboston.gov/fire/, Permits and
Applications section.
• Colorfastness to Light – AATCC 16 Option 1 or 3-2003, or dated version current when specified:
Drapery fabrics: 60 Hours, Grade 4.
• Wet and Dry Crocking, All Fabrics, 4.0 Dry, 3.5 Wet –AATCC 8-200: (Except prints: AATCC
116—2001 or dated version current when specified).
• Tensile Strength. Fabrics – ASTM D5034-95 (2001, or dated version current when specified )
(Grab Test): 25 lbs. for over 6 Ounce/yd. squared Drapery & 15 lbs. for less than 6 Ounce.
• Fabrics & Black Out - No PBDE’s (Polybromide Diphenyl Ethers) shall be used and formaldehyde
content shall be below the allowable threshold limit.
Performance
• All draperies, hardware and installation shall be provided in accordance with the specifications
contained herein and shall not have deviations other than orders written and issued by the
purchasing agent.
• The fabricator is responsible for taking measurements at the job sites and for dimension accuracy in
their quotations.
• The fabricator shall make no variations, additions, or deletions to the contract issued by the
purchasing agent without a confirmed addendum.
• Tentative start dates shall be provided by the purchasing agent at the time the quotation is
requested. It is the responsibility of the contractor to call the purchasing agent periodically to insure
the install date has not changed.
• The fabricator shall be responsible for forwarding quotations to the purchasing agent within six (6)
weeks of the installation start dates for new builds and within eight (8) weeks for renovations.
• Hardware and parts shall be itemized, priced and listed separately.
• If requested, fittings and supplies such as buckram, weights, thread, and samples shall be
submitted to the purchasing agent for approval before fabrication has started.
2
• All drapes and sheers shall be made with the required widths of fabric specified and never shall less
than one-half of a width be used in any panel. All ceiling-to-floor draperies and sheers shall fall to
¾” to 1” from the carpet or any finished floor surface, unless otherwise noted on the drawings. All
ceiling-to-PTAC, bench or other surface elevated from the floor surface treatments shall fall to ½”
from the top of the elevated surface unless otherwise specified.
• All selvages shall be removed, patterns shall be matched; drapes and sheers shall be made to
exact size.
• All corners on the bottom hem shall be mitred. Face fabric hems shall be blind-stitched. The thread
shall be poly-cotton and color matched.
• If center-close, the overlaps shall be 3 ½” with the buckram double folded back.
• The returns shall be 3” to 6” depending on the application with the double fold back of the return.
• If specified, all slant tops shall follow the angle of the window and all pleats shall be upright. All
bottom hems shall be level.
• All seams shall be overlock stitched (serged) with safety stitches, and all seams shall be hidden at
the side of the pleat, or back of the ripple fold, using poly/cotton neutral-color thread, unless
otherwise specified.
• The side hems shall be 1 ½”, blind stitched and double folded using poly/cotton thread.
• If the drapes are not wall-to-wall, the fabrication is to ensure that the returns reach the walls the
drapes cover.
Drapes Fabrication
Sheers Fabrication
3
• Applicable to all sheers:
o Unless otherwise specified, the fullness shall be 250% to 300%, except for ripple fold.
(NOTE: Fullness varies by brand and property. If the property does not adhere to
prototypical designs, please consult with the purchasing agent or design firm. If the
fullness is not specified, consult with the purchasing agent or design firm).
o The bottom hems shall be 4”, double folded and sewn using straight single needle
lockstitches with poly/cotton thread. Lobbies and suites bottom hems shall be blindstitched.
Hanky hems may be specified. (Bottom weight serged in the hem)
o The side hems shall be 1 ½”, blind stitched and double folded using poly/cotton thread.
o Kirsch or Kirsch style weighted tape shall be used the entire length of the bottom hems at or
near the bottom.
o The overlaps shall be 3 ½” with double fold back of the buckram.
o The returns shall be 3” inches with double fold back of the buckram.
• Applicable to all ripple fold sheers:
o The fullness range shall be 120%, or as specified per project.
• Pinch pleat:
o Headings shall be 4” and double folded with permanent finished buckram, double-back folds
at the overlaps and returns and sewn closures using poly/cotton thread.
o If triple-fold French pleats are selected, they shall be machine sewn with 14 thread bar or “L”
tacked 1/2” inch up from the bottom of the buckram, using poly/cotton thread.
Blackout
• The fabricator shall construct and install cornices as follows, unless otherwise specified:
o 1/2” particleboard shall be used. Plywood is not authorized.
o 5 ounce fill or padding, flame retardant shall be used.
o 1” by 2” inch header board shall be used.
o Self cord welt top, bottom and sides shall be used.
o The lining shall be blind tacked with tackless stripping on the bottom to hide the staples.
o Stainless steel staples shall be used.
o All cornice installations shall use “L” brackets on the walls and Z” brackets on ceilings.
o A full width of fabric shall be centered on the cornice with seams equidistant from each end.
o If the cornices are not self lined, the fabricator shall ensure that the lining fabric has an FR
rating suitable to the jurisdiction in which it is installed.
Hardware
All hardware shall be of commercial quality and workmanship and shall be Kirsch or Kirsch style. The
following are specific area requirements that shall be followed:
4
• Fiberglass batons shall be used and shall be rounded at both ends. ADA batons shall have their
bottom ends hanging 48” off the floor. (Note: ADA batons MAY be acrylic if fiberglass is not
available).
• Acrylic batons are never appropriate except for ADA applications.
• All hooks shall be stainless steel and Kirsch or Kirsch quality.
• All masters shall be wheeled and there shall be 6 to 8 included.
• All window treatments shall be mounted so that they do not separate from the wall or ceiling.
• All drapes and sheers shall be hung so that they drape properly (When viewed from the top, the
fabric drapes in a continuous “S” pattern). Check buckram and break it if needed to insure S folds
start at the buckram and flow to the floor.
• All pinch pleat draperies shall be pinned and hung evenly with appropriate pin-on hooks except for
draperies over 12 feet long. They shall be hung using sew-on hooks.
• Angle brackets shall be attached to the wall with a screw to attach the return. Tenter hooks shall
not be used.
• If needed in instances where the draperies end at doorways, the fabricator shall install a Lucite cuff
mounted against mullion and lined up with the doorknob. (The cuff shall be supplied by the
fabricator as part of the original quote and shall be billed to the purchasing agent. In cases where it
is not part of the quote, it is shall be billed as a separate item).
• All sheers shall be hung so that they are not visible at any edge when the drapes are in their closed
position.
5
Flooded Floorplans
Carpet Base, Guestroom
X210C_CP-RD-67_275701
Repeat: 0.8"W x 2.7"L
12'-0" Goods
Detail "A"
A Guestrooms, Typical
1
Scale: 4" = 1'-0"
BOH | Stairwell *See Notes (typ.)
X965B_A5108_273862 **See Notes (typ.)
Repeat: 36"W x 48"L 2 Places
12'-0" Goods
Corridor Runner
X753D_Y9947_277914
Repeat: 90"W x 115.2"L
15'-0" Goods
Project Notes:
* - A slight shade variation may occur due to pile direction change
Fairfield Inn PS & GR - Prototype Development **
***
- Possible pattern mismatch may occur at these seams
- Carpet cut requires reconstruction on site by installer
This drawing and the designs contained therein are the sole property This job was based on information submitted by the customer's firm Seam lines represent known seams only, and additional
of Shaw Hospitality Group. This drawing may not be reproduced or
used without written permission from Shaw Hospitality Group.
and/or agent(s). Shaw Hospitality Group is not responsible for final
yardage requirements. These plans must be field verified by a carpet
Unauthorized use will give rise to a claim for damages. This drawing is installer for accuracy and final yardage requirements. Dimensions,
Seaming Diagram - Full Estimate or
or
-
seams may be required due to roll lengths and/or job site conditions
- Carpet pile direction arrow indicates pile lay direction
to show interior design intent only and should not be used for sizes, amounts, known seams and/or any other information provided
construction purposes. While every attempt has been made to avoid on these plans may require on site adjustments due to job site
Sheet #: 1 of 1
Estimating Service # Date Comments (Drawn By)
errors in preparing this drawing, Shaw Hospitality Group can not conditions and/or minimal shrinking and/or stretching in the Date: 10/18/2016 - Sales Rep: David Burn
guarantee against human error. All contractors and others utilizing this manufacturing processes. Sizes and amounts provided on these plans Estimated By: David Cox 770 276 7460 - NSP #: 717386 1. 2D Conceptual 10/18/2016 Initial Development
drawing in connection with this project are responsible for verifying all are net. Additional amounts and/or pattern repeats are included in the
dimensions, yardage quantities, conditions, codes, ordinances, and quantities provided in Shaw Hospitality Group's estimating quote. 410 Old Mill Road, Cartersville, GA 30120 2. 2D Conceptual 12/15/2016 Revision 11 - Dave Cox
must immediately report any discrepancies to Shaw Hospitality Group. (800) 342 7429 3. 2D Conceptual 12/20/2016 Revision 13 - Dave Cox
© COPYRIGHT 2003 - 2016 SHAW INDUSTRIES GROUP, INC., A BERKSHIRE HATHAWAY COMPANY www.shawhospitaltygroup.com 4. 2D Conceptual 12/08/2016 Revision 9 - Dave Cox
ATTENTION INSTALLER: FOR ANY INSTALLATION ISSUES WHILE INSTALLING CARPET, PLEASE CONTACT TECHNICAL SERVICES 423-449-9352
10"
IT CLOSET
LAUNDRY
KING
PROJECT NAME
LOBBY
REGISTRATION
WORK
3'-0"
THE CORNER
MARKET
OFFICE
STORAGE
VESTIBULE
www.taipingcarpets.com
ON THIS PLAN, ARROWS INDICATE PILE DIRECTION WHICH CORRESPONDS TO THE ROLL ID STITCHED ON FACE OF EACH EJ ROLL
ATTENTION INSTALLER: FOR ANY INSTALLATION ISSUES WHILE INSTALLING CARPET, PLEASE CONTACT TECHNICAL SERVICES 423-449-9352
PROJECT NAME
www.taipingcarpets.com
ON THIS PLAN, ARROWS INDICATE PILE DIRECTION WHICH CORRESPONDS TO THE ROLL ID STITCHED ON FACE OF EACH EJ ROLL
ATTENTION INSTALLER: FOR ANY INSTALLATION ISSUES WHILE INSTALLING CARPET, PLEASE CONTACT TECHNICAL SERVICES 423-449-9352
SUITE SUITE QUEEN SUITE SUITE QUEEN Dashed lines shown on the seaming diagram are used to indicate
the known seam locations only; however, additional seams may be
QUEEN KING KING KING KING required during the installation of the carpet. Please note that by
QUEEN SUITE QUEEN QUEEN QUEEN accepting this seaming diagram you are confirming your approval on
the known seam locations referenced and understand that due to the
KING KING KING STAIR 2 custom manufacturing process Tai Ping Carpets Americas, Inc. is
QUEEN QUEEN QUEEN unable to guarantee that additional seams which are currently not
shown may required to complete the installation.
Adjustment seaming may be necessary. This fabrication will be done
on job site. In order to prevent damage to seams and prevent the
hazard of tripping, thresholds should be used in doorways to cover
seams between carpets or other floorings with different pile heights.
Measurements obtained during the site verification will be
incorporated into a revised seaming diagram that will be provided to
you. If the installation method chosen for this project is considered
either full or partial electronic jacquard (EJ) the need for the site
verification is heightened; as we will use the dimensions which are
provided from the site verification to allow us to manufacture the
ELEC. carpet with the intent to have the material installed in a precise
location within the property. The EJ production method allows us to
produce two or more designs as one piece and allows for minimal
MECH. seams while achieving the desired design concept.
Carpet layouts can vary due to unforeseen circumstances and a site
verification may be necessary. Therefore, we recommend that you
have your installer review this seaming diagram and provide you with
the specific site verification details or we can provide this service to
you for a fee. Please note that Tai Ping does not guarantee the
information provided on the seaming diagram if an official site
verification has not been completed by a representative of Tai Ping
Carpets.
Carpet is a textile fabric subject to inevitable processing variations in
ELEV A ELEV B the four pattern conditions: bow, skew/bias, elongation/shrinkage and
trueness of edges. There are no industry standards for carpet pattern
variations. It is highly recommended that installation is performed by
LINEN an experienced Axminster pattern carpet installer.
Prior to the production of the actual material the following approvals
KING KING KING KING must be provided in addition to this seaming diagram: signed design
renderings for all designs which will be used as your approval on scale,
KING QUEEN ACCESSIBLE QUEEN QUEEN design intent, design repeat details, and color placement only; signed,
QUEEN ACCESSIBLE design layout; and signed kibby sample(s) reflecting all colors used
QUEEN KING QUEEN QUEEN which will be used as your approval on color only and will be sent to
QUEEN KING QUEEN QUEEN
our factory to reference for color matching purposes.
QUEEN Measurements shown on plan are net. However, pattern match is
included in quantities on takeoffs to allow for shifting of the carpet
QUEEN QUEEN QUEEN QUEEN
to ensure side match.
Design borders, if applicable on this project, were not designed to
miter. Where such miters occur, Tai Ping cannot guarantee pattern
QUEEN match.
EJ INSTALLATIONS
Before installing, all panels should be dry-layed to relax and
GEN 4 TYPICAL UPPER FLOOR acclimate to the climate conditions. Due to possible shrinking and
stretching of panels during the manufacturing process, stretching
may be necessary to make a proper match. The longest panel should
be installed first, then the short panels can be stretched to make a
proper match.
EJ situations require Tai Ping to add additional amounts of carpet
to the ends of each panel in order to ensure adequate finished rug
lengths and allow for any shifting to ensure side matching between
panels.
Due to possible elongation, all rolls must be dry layed, according to
the panel numbers as noted on the seaming diagram, to establish the
ELEC.
longest pattern repeats. The shorter repeat rolls are stretched to
match the longer rolls.
Installation in large areas should begin in the center of the area,
installing outwards in both directions.
Due to manufactured roll lengths, possible head seams may be
needed to complete installation for some areas.
All PDF prints are not to scale.
MECH.
PROJECT NAME
ELEV A ELEV B
ON THIS PLAN, ARROWS INDICATE PILE DIRECTION WHICH CORRESPONDS TO THE ROLL ID STITCHED ON FACE OF EACH EJ ROLL
ATTENTION INSTALLER: FOR ANY INSTALLATION ISSUES WHILE INSTALLING CARPET, PLEASE CONTACT TECHNICAL SERVICES 423-449-9352
PROJECT NAME
www.taipingcarpets.com
ON THIS PLAN, ARROWS INDICATE PILE DIRECTION WHICH CORRESPONDS TO THE ROLL ID STITCHED ON FACE OF EACH EJ ROLL
Window Treatment Package
Drapery Fabricators
Leonard’s Draperies
10441 Rhode Island Avenue
Beltsville, MD 20705
Jay Marks
jay@leonardsdraperies.com
301-441-2600
SK Textile
2938 E 54th Street
Vernon, CA 90058
Jessica Bratton
jbratton@sktextile.com
800-888-9112 ext. 7617
Jerry Katz
jkatz@sktextile.com
410-241-1752
quotes@sktextile.com
Quiltcraft Industries
1230 E. Ledbetter
Dallas, TX 75216
David Pearson
dpearson@quiltcraft.com
800-462-2805
Vendor:Hunter
Vendor: HunterDouglas
Douglas
Pattern: Franklin
Pattern: Franklin
Color:Dark
Color: DarkGray
Gray
Openess:
Openess: 19%19%
FRONT LOBBY
MEETING ROOMA
Traversing
Traversing Sheer:
Sheer
120% Fullness
Ripplefold
Hanky Hem
Vendor: Richloom
Pattern: Alison Sheer 117" Railroaded
Color: Slate
Material ID#: 270147
Traversing
Traversing Blackout
Blackout Liner
Liner
120% Fullness
Ripplefold
½” Clean finish Hem
Vendor: Rockland Mills
Pattern: 3 Pass Blackout (54)
Color: Ivory/Ecru
Material ID#: 233708
FRONT LOBBY
ROOMA
CORRIDORS
MEETING
Traversing
Traversing Sheer:
Sheer
120% Fullness
Ripplefold
Hanky Hem
Vendor: Richloom
Pattern: Alison Sheer 117" Railroaded
Color: Slate
Material ID#: 270147
GUESTROOM APPLICATION
(Condition A) Ceiling Height - 9’0” or less:
Printed Sheer Roller Shade with Image Selection Options - Inside Mount
Traversing Blackout Overdrape - Ceiling Mount
No Cornice
(Condition B) Ceiling Height – Greater than 9’0”:
General Contractor to install wall mounted painted Cornice with an
appropriate Dust Cap to support ripplefold drapery track. Refer to
Prototypical Drawings and Interior Finish Index for Cornice guidelines.
Bottom edge of Dust Cap to be 8’6” above finished floor.
Blackout Drapery Track to be installed in cornice
Hardware:
8' wide ceiling mounted black H-Rail HRW
Vendors:
Rowley AraA Rail Ceiling Clip Kit in Matte Black
Forest Drapery Hardware Deventer Collection Ceiling Mount
GUESTROOM SPECIFICATION
Traversing Blackout
Traversing BlackoutOverdrape
Overdrape
Ripplefold
100% Fullness
Ceiling Mount to Top of FF&E Ledge
Center
Ripplefold
Draw
½” Clean finish Hem
Vendor: Rockland
Pattern: Denimtone Blackout 54"
Color: Buff
Material ID#: 271187
Printed Sheer Roller Shades
Inside Mount
Manual clutch operated with right clutch control
3" Fascia
Fabric wrapped hem bar
Image options: Refer to Interior Design Specification Manual
X-102SALT1 Material ID# 271775
X-102SALT2 Material ID# 271776
X-102SALT3 Material ID# 271777
Vendor: Fabtex
Motorized Drapery Hardware as Required
Motorized hardware to be used in accessible rooms as required to comply with all applicable
federal, state and local accessibility regulations.
Drapery Contractor to include the purchase and installation of motorized hardware in the drapery
fabrication and installation quote.
BTX and Lutron come with a 5 year warranty and Forrest Group USA comes with a 10 year
warranty. Drapery fabricator to provide warranty information to operations at each of the property
locations installed.
Always use the plug in system (not hardwired) which can be connected to a standard 120V outlet.
Outlet to be supplied by others.
A hand held remote will be used to operate the motorized hardware and in most cases it will be a
two rod, two drape system operated by one remote. Documentation of the remote programing,
motor identification number and room number must be kept to make the order of replacement
remotes seamless.
The motorized hardware will be ceiling mounted and will be a one way draw or center draw as
specified by the elevation drawings and/or design drawings.
For guestrooms with high ceilings requiring wall-mounted drapery installation, motorized hardware
will be wall mounted.
A separate rod and motor will be used for each specified window treatment. For example, a
treatment with a blackout drapery and a separate decorative sheer requires two rods and two
motors.
The drapery motor needs to be mounted on the side closest to the exterior wall outlet. Multiple
motors must always be mounted on the same side of the room.
When a room is equipped with an off centered PTAC unit, the drapery motor is preferred to be
installed opposite the PTAC unit if the location of the outlet allows.
If the PTAC unit is located in the middle of the window wall or there is no PTAC unit in the room
the drapery motor is preferred to be located opposite the entry wall if the location of the outlet
allows.
EXERCISE ROOM; OFFICE & BACK OF HOUSE
Solar Shade:
19
124
17 1/8 25 74 25
3 5 7/8 3" WIDE RAILS
FIELD INSTALLED
C.O.M. SCONCE
24
CUTOUT FOR
SCONCE CORD INSET
LPL PANEL
6 46
68 INSET INSET
72 LPL PANEL LPL PANEL
AFF
LINE OF MATTRESS
VENEER
5 VENEER GRAIN
GRAIN
8 VENEER GRAIN
18
12
LINE OF FLOOR
4
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
DRAWN BY: kmeadowREVISED BY: kmeadow KING HEADBOARD (LEFT KH MODEL NUMBER REVISION
DRAWN BY: kmeadowREVISED BY: kmeadow KING HEADBOARD (LEFT KH MODEL NUMBER REVISION
19
124
17 1/8
25 74 25
3
3" WIDE RAILS 5 7/8
FIELD INSTALLED
C.O.M. SCONCE
24
CUTOUT FOR
SCONCE CORD
INSET
LPL PANEL
46 6
72
AFF
INSET INSET
LPL PANEL LPL PANEL
68
LINE OF MATTRESS
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
DRAWN BY: kmeadowREVISED BY: kmeadow KING HEADBOARD (RIGHT KH MODEL NUMBER REVISION
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
DRAWN BY: kmeadowREVISED BY: kmeadow KING HEADBOARD (RIGHT KH MODEL NUMBER REVISION
NON-SKID
STRIP 71
BLACK LPL
PLATFORM
PANEL
MATTRESS OUTLINE
R 2 1/2
79 1/2
80
COM MATTRESS 72 COM MATTRESS
10 5/8 12
BLACK LPL BLACK LPL
71 1/2 8 8 55 8
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
VENEER 11
VENEER
14 GRAIN CLOTHES SHELF
VENEER SEMI-FINISHED SIDE PEG
SHELF
20 1/2
6" X 9"
REMOVABLE 12 1/2
PANEL IN
CLOTHES END PANEL
13 5/16 ROD
LIGHT
11 3/8 VENEER
120v
85 GRAIN BACK PANEL
VENEER GRAIN
SWING
VENEER GRAIN
DOOR
VENEER 19 1/2
85 GRAIN POWER
VENEER 77 STRIP
GRAIN
BACK
58 1/4 PANEL
VENEER 66 APRON
GRAIN VENEER GRAIN
63 56
12" X 12"
CUTOUT IN
END PANEL
34
19
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
NOTE: CLOSET DOOR FACES BED SIDE SPACER RAIL 37 1/4 3/4
34 38 16
3 31 19 3/4 17 1/2 3/4 31 3
15 5/16
VENEER GRAIN 4 VENEER GRAIN
VENEER
11 CLOTHES
GRAIN
VENEER PEG 14
SHELF SEMI-FINISHED SIDE
VENEER
SHELF
20 1/2
6" X 9"
12 1/2 REMOVABLE
PANEL IN
END PANEL CLOTHES
ROD
13 5/16
LIGHT 11 3/8
85 120v
BACK PANEL
VENEER GRAIN
SWING
VENEER GRAIN
19 1/2 VENEER VENEER DOOR
POWER GRAIN 77 GRAIN 85
VENEER
STRIP
GRAIN BACK
PANEL
66 VENEER 58 1/4
APRON GRAIN
VENEER GRAIN
56 63
12" X 12"
CUTOUT IN
34 END PANEL
19
REFRIGERATOR, MICROWAVE CLOSET FRONT VIEW CLOSET SIDE VIEW CLOSET FRONT VIEW WITH
FRONT VIEW CLOSET DOOR FACES BED SIDE NEXT TO WALL DOOR OPEN 90v
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
17 1/8
1 1/4" X 2 1/4" CUTOUT
IN NIGHTSTAND TOP
HPL GRAIN
FOR CORD ROUTING
25
161
68 25 68 17 1/8
62 62 3
5 7/8 3" WIDE RAILS
FIELD INSTALLED
C.O.M. SCONCE
CUTOUT FOR 24
O1" HOLE FOR SCONCE CORD O1" HOLE FOR
READING LIGHT READING LIGHT
INSET 6 46 INSET
LPL PANEL LPL PANEL 72
AFF
INSET
LPL PANEL 68
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
17 1/8
1 1/4" X 2 1/4" CUTOUT
IN NIGHTSTAND TOP HPL GRAIN
FOR CORD ROUTING
28
164
68 28 68 17 1/8
62 62 3
5 7/8 3" WIDE RAILS
FIELD INSTALLED
C.O.M. SCONCE
CUTOUT FOR
SCONCE CORD 24 O1" HOLE FOR
O1" HOLE FOR
READING LIGHT READING LIGHT
46 INSET
INSET 6 LPL PANEL
LPL PANEL 72
INSET AFF
LPL PANEL 68
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
NON-SKID 59
STRIP
BLACK LPL
PLATFORM
PANEL
MATTRESS OUTLINE
R 2 1/2
79 1/2
80 60 COM MATTRESS
COM MATTRESS
71 1/2 8
8 43 8
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
VENEER VENEER 11
14 GRAIN CLOTHES SHELF
VENEER SEMI-FINISHED SIDE PEG
SHELF
20 1/2
6" X 9"
REMOVABLE 12 1/2
PANEL IN
CLOTHES END PANEL
18 5/16 ROD
LIGHT
16 3/8
120v BACK PANEL
85
VENEER GRAIN
SWING VENEER GRAIN
DOOR
VENEER VENEER 19 1/2
85 GRAIN POWER
VENEER 77 GRAIN
STRIP
GRAIN
BACK
58 1/4 PANEL
66
VENEER APRON
GRAIN VENEER GRAIN
63 56
12" X 12"
CUTOUT IN
END PANEL
34
19
CLOSET FRONT VIEW WITH CLOSET SIDE VIEW CLOSET FRONT VIEW REFRIGERATOR, MICROWAVE
DOOR OPEN 90v SIDE NEXT TO WALL CLOSET DOOR FACES BED FRONT VIEW
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
NOTE: CLOSET DOOR FACES BED SIDE SPACER RAIL 42 1/4 3/4
34 43 21
3 31 19 3/4 22 1/2 3/4 31 3
20 5/16
VENEER GRAIN 4 VENEER GRAIN
11 CLOTHES VENEER
VENEER PEG GRAIN 14
SHELF SEMI-FINISHED SIDE VENEER
SHELF
20 1/2
6" X 9"
12 1/2 REMOVABLE
PANEL IN CLOTHES
END PANEL ROD
18 5/16
LIGHT
16 3/8
BACK PANEL
85 120v
VENEER GRAIN
12" X 12"
CUTOUT IN
34 END PANEL
19
CLOSET FRONT VIEW CLOSET SIDE VIEW CLOSET FRONT VIEW WITH
REFRIGERATOR, MICROWAVE
CLOSET DOOR FACES BED SIDE NEXT TO WALL DOOR OPEN 90v
FRONT VIEW
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
17 1/8
1 1/4" X 2 1/4" CUTOUT
IN NIGHTSTAND TOP HPL GRAIN
FOR CORD ROUTING
28
152
62 28 62 17 1/8
56 56 3
5 7/8 3" WIDE RAILS
FIELD INSTALLED
C.O.M. SCONCE
CUTOUT FOR
O1" HOLE FOR SCONCE CORD 24 O1" HOLE FOR
READING LIGHT READING LIGHT
INSET 46 INSET
LPL PANEL 6
LPL PANEL
72
AFF
INSET
LPL PANEL 68
VENEER GRAIN 5 12
VENEER GRAIN
VENEER
VENEER GRAIN 8 GRAIN
VENEER LINE OF PLATFORM VENEER VENEER LINE OF PLATFORM VENEER
GRAIN BED GRAIN GRAIN BED GRAIN
ACCESS
PANEL 23
18
12 LINE OF FLOOR
4
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
DRAWN BY: kmeadow REVISED BY: kmeadow ADA DOUBLE DOUBLE HEADBOARD
KH MODEL NUMBER REVISION
DRAWN BY: kmeadow REVISED BY: kmeadow ADA DOUBLE DOUBLE HEADBOARD
KH MODEL NUMBER REVISION
17 1/8
1 1/4" X 2 1/4" CUTOUT
IN NIGHTSTAND TOP HPL GRAIN
FOR CORD ROUTING
25
149
62 25 62 17 1/8
56 56 3
5 7/8 3" WIDE RAILS
FIELD INSTALLED
C.O.M. SCONCE
CUTOUT FOR 24
O1" HOLE FOR SCONCE CORD O1" HOLE FOR
READING LIGHT READING LIGHT
6 46 INSET
INSET LPL PANEL
72
LPL PANEL
AFF
INSET
LPL PANEL 68
VENEER GRAIN 5 12
VENEER GRAIN
VENEER
VENEER GRAIN 8 GRAIN
VENEER LINE OF PLATFORM VENEER VENEER LINE OF PLATFORM VENEER
GRAIN BED GRAIN GRAIN BED GRAIN
ACCESS
PANEL 23
18
12 LINE OF FLOOR
4
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
HPL GRAIN
23 1/2
72
43 3/4 14 23 1/2
1 1/4
30
28 3/4
25 5/8
NOTES:
1. DRAWER TO BE FIELD INSTALLED AND CAN BE PLACED AT RIGHT OR LEFT END.
2. DRAWER TO BE LOCATED NEAREST GUEST ROOM WINDOW.
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
HPL GRAIN
23 1/2
66 23 1/2
1 1/4
2 1/2
30
28 3/4
NOTES:
1. DESK CAN BE USED FOR LEFT OR RIGHT CONFIGURATIONS WITH REFRIGERATOR CABINETS.
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
95°
SWING VENEER
GRAIN VENT CUTOUT 21 3/4
VENEER
GRAIN 26 1/4
HPL
20 13/16
BLACK LPL VENT CUTOUT VENT CUTOUT VIEW WITH DOOR REMOVED
REFRIGERATOR SHOWN: ABSOCOLD ARD104AB14
SIZE: 15"W X 16 1/8"D X 20 5/8"H
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
95°
SWING VENEER
GRAIN VENT CUTOUT 21 3/4
VENEER
GRAIN 26 1/4
HPL
20 13/16
BLACK LPL VENT CUTOUT VENT CUTOUT VIEW WITH DOOR REMOVED
REFRIGERATOR SHOWN: ABSOCOLD ARD104AB14
SIZE: 15"W X 16 1/8"D X 20 5/8"H
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
DRAWN BY: kmeadow REVISED BY: kmeadow RIGHT REFRIGERATOR CABINET 3630A23A15R
KH MODEL NUMBER REVISION
1/4
21 1/4 3/4
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
R 5
METAL BACK
SPLASH
20 33
12 20 3/8
3 1/2
1/2
VENEER GRAIN
8 1/8
VENEER GRAIN
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
R 5
METAL BACK
SPLASH
20 33
12 20 3/8
3 1/2
1/2
VENEER GRAIN
8 1/8
VENEER GRAIN
VENEER GRAIN
VENEER
GRAIN
23 1/2 VENEER
GRAIN
20
BLACK LPL
BLACK LPL
MARRIOTT REFERENCE KIMBALL
ID NUMBER NUMBER DESCRIPTION MODEL NUMBER MODEL SIZE
270350 X-203R RIGHT LUGGAGE BENCH 3630A14D15RA 32 3/4 X 19 7/8 X 19 1/2
270508 X-203STNR RIGHT STONE TOP 3630A14D15RB 33 X 20 X 1/2
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
4
2 1/2
2 1/2
1 CLEARANCE 1
4
63 1/2
2 1/2
TV VIDEO POWER PLUG POWER STRIP
MOUNTING
CLEATS WITH
3/4" THICK
WALL CLEATS
VENEER GRAIN
17
WALL
VENEER GRAIN 6 31 1/2
CUTOUT
MOUNTING
CLEATS WITH
3/4" THICK
WALL CLEATS
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
HPL GRAIN 8
( 15 1/2 )
95 1/2
PTAC OUTLINE
2 3/4 ( 90 ) 2 3/4
DRAPES
DRAPES
OUTLINE
OUTLINE
95 1/2
42
PTAC OUTLINE
23 3/8
12 66 1/2 12 6
2 1/2 2 1/2
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
DRAWN BY: kmeadowREVISED BY: kmeadow LEDGE UNIT AT PTAC KH MODEL NUMBER REVISION
DRAWN BY: kmeadowREVISED BY: kmeadow LEDGE UNIT AT PTAC KH MODEL NUMBER REVISION
NON-SKID 53
STRIP
BLACK LPL
PLATFORM
PANEL
R 2 1/2
79 1/2
MATTRESS OUTLINE
80 54 COM MATTRESS
COM MATTRESS
71 1/2 8
8 37 8
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
R 5
METAL BACK
SPLASH
65
20
28
3/8
3 1/2
1/2
8 1/8
VENEER GRAIN
VENEER GRAIN VENEER GRAIN
VENEER GRAIN
VENEER GRAIN
VENEER
GRAIN
23 1/2
20
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
24
VENEER
GRAIN
24
15 3/4 8 16
8
VENEER
10 GRAIN
VENEER
GRAIN 6
24
14
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
42 24 1/2
1 1/4
20
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
DRAWN BY: jablankREVISED BY: kmeadow COCKTAIL TABLE, K/D KH MODEL NUMBER REVISION
BACK PANEL
VENEER GRAIN
11
VENEER
BACK SHELF
BACK
PANEL PANEL
VENEER VENEER
GRAIN GRAIN VENEER
20 1/2
32 1/4
GRAIN 12 1/2
VENEER
GRAIN
SEMI-FINISHED SIDE
VENEER
SHELF LIGHT
VENEER GRAIN
120v 120v
SWING SWING 85 BACK PANEL
DOOR DOOR VENEER GRAIN
19 1/2
85
CLOTHES VENEER VENEER 77 6" X 9"
ROD GRAIN GRAIN REMOVABLE
PANEL IN
END PANEL
11 3/8 APRON
VENEER GRAIN
48
19
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH
3
SIDE NOTE:
OPTIONAL UP-LIGHT SPACER UNIT IS K/D
BACK PANEL
VENEER GRAIN
11
VENEER
SHELF
BACK BACK
PANEL PANEL 20 1/2
VENEER VENEER 32 1/4 VENEER
GRAIN GRAIN 12 1/2 GRAIN
VENEER
GRAIN
SEMI-FINISHED SIDE
VENEER LIGHT
SHELF 85
BACK PANEL 120v 120v
VENEER GRAIN
VENEER GRAIN SWING SWING
VENEER GRAIN
11 3/8 APRON
48 VENEER GRAIN
45 1/4
12" X 12"
CUTOUT IN
23 3/8 END PANEL
19
CLOSET FRONT VIEW WITH REFRIGERATOR, MICROWAVE FRONT VIEW CLOSET FRONT VIEW CLOSET SIDE VIEW
DOORS OPEN 90v QUEEN ROOM - REFRIGERATOR FACES BED KING ROOM - CLOSET DOORS FACE BED SIDE NEXT TO WALL
Distinctive Furniture Solutions These specs. & drawings are the property of Kimball Hospitality and shall not be copied or used as basis for manufacture or sale without written permission by an officer of KH