Professional Documents
Culture Documents
Manual
July 20202
UNI-TREND TECHNOLOGY(China) Co.,Ltd.
UNI-T
Copyright
2019 Uni-Trend Technology (China) Co., Ltd.
Brand Information
UNI-T is the registered brand of Uni-Trend Technology (China) Co., Ltd.
Document No.
Software Version
1.0.0
Software upgrade may have some changes and add more functions, please subscribe UNI-T website to get
the new version or contact UNI-T.
Statement
⚫ Patents (including obtained and pending patents) protect UNI-T products in China,
other countries and regions.
⚫ UNI-T reserves the right to change specification and prices.
⚫ The information provided in this manual supersedes all previous publications.
⚫ If there has any changes will not be prior notice.
⚫ UNI-T shall not be liable for any errors that may be contained in this manual. For
any incidental or consequential damages, arising out of the use or the information
and deductive functions provided in this manual.
⚫ UNI-T is not responsible for any error that may contain in this manual. In addition,
any incidental or consequential losses cause by this manual shall not be responsible.
⚫ Without the prior written permission of UNI-T, this manual cannot photocopy,
reproduction or adaptation.
Product Certification
UNI-T has certified that the product conforms to China national product standard and
industry product standard as well as ISO9001:2015 and ISO14001:2015. UNI-T will
further certified the product to comply with the standard of other member of International
Standards Organization.
Contact Us
If you have any questions or problems, you can contact us,
Website:https://www.uni-trend.com/
UNI-T
Installment
Hardware Requirements
Software Requirements
• Support system with WinXP, Win Vista, Win7, Win8 and Win10.
Other Requirements
factory configuration.
• Please make sure other communication lines are all in good conditions.
Overview
The tester software is to set the oscilloscope to display and record data.
• The test software will search and connect with electronic load of computer
automatically.
• Five modes: list mode, dynamic mode, OCP mode, battery test and fast charge
test mode.
Function
List Mode
as shown below,
Channel switch
confirm
Basic Setting
Set the relevant parameters as the figure, push “Start” to run list test, test result will
display after test.
UNI-T
Dynamic Mode
Set the relevant parameter as the figure, push “Start” to run dynamic test.
UNI-T
OCP Mode
Set the relevant parameter as the figure, push “Start” to run OCP test.
Fast charge interface as shown above, according to charger to choose fast charge
protocol and set the relevant parameters, push “Start” to run fast charge test.