Professional Documents
Culture Documents
Table of Contents
Preface
Three-Layer Clad Strip Casting Using a Vertical Type Tandem Twin Roll Caster
T. Haga, K. Okamura, H. Warari and S. Nishida 171
Experimental Study on the Corrosion Behavior of Produced Fluid on J55 Steel during CO2
Flooding
J.S. Zhao, Y.J. Ju, M.R. Tang and R.H. Chen 179
Effect of FeO-CaO-SiO2-MgO-xAl2O3 Slags with 12.0~26.0 wt.% Al2O3 Content on
Dephosphorization of Molten Steel
C.M. Lin, C.W. Yu, W. Wu, C.C. Li and K.L. Chang 184
Microstructure and Bending Strength of Dissimilar SS400/SUS304 Steels T-Fillet Joint by
Gas Metal Arc Welding
K. Kimapong and S. Triwanapong 189
Shear Strength and Fracture Location of Dissimilar A6063 Aluminum Alloy and SUS430
Stainless Steel Lap Joint
P. Yaemphuan, S. Triwanapong and K. Kimapong 196
Grain Size Effect on Saddle Phenomenon in V-Bending Process of Thin Sheet Metal
C.C. Chen and Y.X. Hong 202
Research of Urban Rail Transit Vehicle Aluminum Alloy Bolster FSW Welding Technology
Based on Thermal-Mechanical Coupling
Y.S. Sun 208
Simulation Analysis of Clamping Force in Welding Process of Aluminum Alloy Flankwall of
Urban Rail Vehicle
Y.S. Sun and D. Sun 214
Multi-Objective Optimization of Surface Roughness and Cutting Forces in Hard Milling
Using Taguchi and Response Surface Methodology
N.C. Vu, S.C. Huang and H.T. Nguyen 220
Flow Characteristics of Microscale Porous Media with Varying Porosity and Pore Size
J.S. Lee 225
Failure Analysis of High Pressure Container using Fractography and Material Morphology
E.S. Kim 287
Investigation of Flammability, Thermal and Toxic Hazards of Liquid Materials in Vehicles
Y.Q. Mao, Y. Hu, X.D. Zhou, J. Cui and L.Z. Yang 292
Elastic Strength of Defective Steel Bolt Group under Eccentric Load Design
J.J. Yang, K.Z. He and W.T. Hsu 299
Experimental Study on Post Fire Tensile Properties of Reinforcing Rebars Connected by
Grout-Filled Splice Sleeves
Y.J. Liu, Q.H. Zeng, H.R. Liu and S.X. Wang 305
Use of Magnesium Hydroxide as Flame Retardant in Poly(Lactic Acid)/High Impact
Polystyrene/Wood Flour Composites
N. Kongkraireug, S. Chuayjuljit, P. Chaiwutthinan, A. Larpkasemsuk and A. Boonmahitthisud 311
Study on Equipment Failure Based on Static Strength Analysis
Y.S. Sun 316