Professional Documents
Culture Documents
MSDS Sample
MSDS Sample
FF- MIGNUS
Information contact:
Insa Boderius Jürgen Beck
Hazardous substances manager Hazardous goods executive
Phone: +49 (0)921-291-5533 +49 (0)921-291-8852
Fax: +49 (0)921-291-8856 +49 (0)921-291-8856
Insa_Boderius@bat.com Jürgen_Beck@bat.com
2. HAZARD IDENTIFICATION
2.1 Hazard description:
2.1.1 Regulation (EC) No 1272/2008
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Skin sensitisation (Category 1)
Chronic aquatic enviroment (Category 3)
Labeling
Peppermint oil,
Contains: Cinnamon bark oil,
Benzyl alcohol
Page 2/5
Name: FF- MIGNUS
Version: 1
Print date: 25.02.2013
Revision date: 25.02.2013
3. COMPOSITION/INFORMATION ON INGREDIENTS
Preparation related information
Description:
Mixture of aromatic ingredients
Hazard ingredients:
67/548/EEC
Chemical name CAS- No. Amount (%) Hazard Characteristics R-Phrases
Mace Oil (Myristica
8007-12-3 <1 Xi, N 10, 43,65, 51-53
fragrans Houtt.)
Peppermint oil 8006-90-4 1-5 Xi, N R 38, 43, 51/53
2216-51-5
Menthol 10 - 15 Xi R 38
89-78-1
R 21, 36/37/38,
Cinnamon bark oil 8015-91-6 1-5 Xn
43
Ginger Oil (Zingiber
8007-08-7 <1 Xn, N R 43, 52/53, 65
OFF.)
Ginger oleoresin 8007-08-6 <1 Xi R 36/38
2-Methoxyphenol 90-05-1 <1 Xn, Xi R 36/38
Pepper oil, black 8006-82-4 <1 Xi R 10, 36/37/38,
Benzyl alcohol 100-51-6 5 - 10 Xn R 20/22
Immediately rinse with water. Remove any contaminated clothing or shoes. Wash affected areas with plenty of soap and water.
If skin irritation continues, consult a doctor.
In case of eye contact:
Rinse eyes with clear water during at least 15 minutes. Then consult a doctor.
In case of ingestion:
Rinse mouth thoroughly with water. If symptoms perist consult doctor.
If any discomfort persists, get medical attentions.
Never make an unconscious person drink liquids.
5. FIRE-FIGHTING MEASURES
5.1 Suitable extinguishing media:
Foam – CO2 – Drychemical - Water
5.2 Extinguishing media which must not be used for safety reasons:
None
5.3 Special exposure hazards arising from the substance or preparation itself,
combustion products, resulting gases:
No special regulations
5.4 Special protective equipment for fire-fighters:
Avoid breathing the vapours; if necessary, cool down the closed containers by water aspersion after removing
them form fire area.
Page 3/5
Name: FF- MIGNUS
Version: 1
Print date: 25.02.2013
Revision date: 25.02.2013
Limit the dispersion of the product. Avoid flames and other sources of ignition.
Discard tissues, sponges etc. used to absorb the spills and destroy by incineration (risk of spontaneous ignition).
The major spilling must be absorbed with inert materials which should then be swept away and destroyed
according to the regulations in force.
Prevent any seeping into sewers or waterways.
6.1 Personal precautions:
Avoid skin and eye contact.
6.2 Environmental precautions:
Disposing into municipal waste water treatment.
6.3 Methods for cleaning up:
Small spills may be flushed with copious water. Cover large Spills with absorbent material (sand or inert powder).
Protective clothing should be selected specifically for the working place, depending on concentration and quality
of the hazardous substances handled. The resistance of the protective clothing to chemicals should be
ascertained with the respective supplier.
Respiratory protection:
Maintain adequate ventilation in working area. Self-contained breathing apparatus should be worn where there
is a risk of excessive vapour concentration.
Hand protection:
Gloves when prolonged contact could occur.
Glove material: nitrile rubber or Vinyl
Eye protection:
Splash proofed safety glasses.
Skin protection:
Protective work clothing.
Appropriate disposal:
Waste codes / waste designations according to EWC / AVV:
The disposal is regionally diffenrently regulated, therfore the kind of disposal is to be inquired at
the responsible authorities.
70704 Solvent based mixtures without halogenated compounds, paint- and lacquer dilution
The information and recommendations contained in this data sheet represent, to the best of British American
Tobacco (Germany)’s knowledge and belief, an accurate and reliable representation as to the known data for
this material. The data have been obtained from a number of sources and British American Tobacco (Germany)
cannot guarantee it’s accuracy, reliability or completeness; nor can British American Tobacco (Germany)
assume any liability for any loss or damage arising out of the use of these data. Tobacco (Germany) assume any
liability for any loss or damage arising out of the use of these data. It is the user’s responsibility to evaluate the
information and use it in a manner consistent with it’s purpose.