Professional Documents
Culture Documents
AURL Construction
Corporation
Subject: Proposal for the supply of Atlas Copco ZT250 VSD Air Compressor
Package
This has reference to our discussion with regards to your requirement of new air compressor
package.
Based on your requirement we are pleased to forward our Techno Commercial Proposal for the
supply of Atlas Copco Oil Free Screw Type Air Compressor Package as per the following pages:
We trust the enclosed information is in accordance with your requirement and we are looking
forward to hearing back with your comments.
If you require any further information on this or any of our products and services, please do not
hesitate to contact me.
Yours sincerely,
Leo Basilio
Senior Product Engineer
Email: leo.basilio@atlascopco.com
QUOTATION
Quote Number: 4969725
Date: 15/03/2024
CONTENTS
Summary of Invetsment 11
Your benefits
Excellent reliability
For over 50 years, Z compressors stand for durability and reliability. They incorporate Atlas
Copco’s proven screw technology, stainless steel coolers, AGMA A5/DIN 5 gears and state-of-the
art electrical drive systems, all of which contribute to the high reliability of your equipment and your
superior productivity.
ZT 132-315 VSD (FF) compressors provide you with 100% pure, clean
air that complies with ISO 8573-1 CLASS 0 (2010)
certification. CLASS 0 means zero risk of contamination; zero risk of
damaged or unsafe products; zero risk of losses from operational
downtime and zero risk of damaging your company’s hard-won
professional reputation.
Atlas Copco’s unique and time proven rotor coating ensures high efficiency over the compressors
lifetime. The state-of-the art air compressor element is powered by a high-efficiency electric motor,
contributing to maximum compressor package efficiency and consequently lower energy costs.
Easy installation
The integrated design of the ZT 132-315 VSD (FF) compressor includes internal piping, coolers,
motor, lubrication and control system: all supplied as a ready-to-use package. Installation is fault-
free, commissioning time is low and no external instrument air is required.
To maximize efficiency and reliability, the Elektronikon® controls the main drive motor and
regulates system pressure within a predefined and narrow pressure band.
QUOTATION
Quote Number: 4969725
Date: 15/03/2024
Reliability
• Superior Teflon rotor coating
• Balance piston on high pressure stage
• Four high precision ball bearings per stage (8
bearings in total)
Efficiency
• Superior rotor coating with running in capabilities
• Liquid cooled element jackets
• Atlas Copco’s proprietary asymmetric rotor profile
Air Quality
• Certified 100% Oil-free air
• Floating ring stainless steel Air seals
• Wind back type oil seal
• Venthole separating air and oil-seals
Reliability
• High efficiency filter
• Pressure differential protection
• Large dust holding capacity
Efficiency
• Low pressure drop – 10mbar
Air Quality
• 99.5% efficiency at 1 micron particle size
Reliability
• No external power supply required
• Mechanical interlocked throttle and blow of function
Efficiency
• Very low unload power
• Very low pressure drop
Reliability
• Inverter duty motor
• IP55 TEFC motors
QUOTATION
Quote Number: 4969725
Date: 15/03/2024
Efficiency
Lower average pressure
Perfect math of air supply versus demand
Virtually eliminates load-unload operation
Efficiency
• Compact integrated design guaranteeing extreme low
pressure drop
• Aluminium brazed plate heat exchangers result in very low
cooler approach temperatures
• High efficiency radial fans
Air Quality
• Low water load to dryers
Reliability
• Dedicated compressor controller
• Full control and monitoring > 100.000 references in the
market
• Protection – service and shutdown warnings
• External communication – possibility to remotely
monitor and control
Efficiency
• Load/ Unload regulation
• DSS: Delayed Second Stop function will stop the motor whenever possible
• Full compatibility with ES systems (Energy savers) and connectivity
Reliability
• No external power supply required
Air Quality
• No oil fumes inside canopy
• Oil is separated and flows back to gear casing
Reliability
• No control valves needed for operation.
• Very few moving components
Efficiency
• No external heating required
• No purge air
• No pre or after filtration
required
Air Quality
• PDP’s as low as -25°C/-13°F
• No after filtration required.
The air (blue) is drawn into the compressor through the inlet filter (1) where the air is cleaned. Then
it passes through the throttle valve (2) with integrated blow off valve that takes care of the load
unload regulation.
In the first compression stage (3) the air pressure is raised to the intermediate pressure after which
the air is cooled down in the intercooler (4). After the intercooler the air passes through a moisture
separation system (5) before entering the high pressure stage (6).
In the high pressure stage the pressure is brought to the final pressure. The air at the outlet of the
high pressure stage goes via the pulsation damper with integrated check valve (7) to the aftercooler
(8) where it is cooled down and moisture is separated and evacuated.
The compressed air leaves the compressor through the outlet connection flange (9).
The yellow flow is the oil path within the compressor, where the oil pump (10) sucks oil from the oil
sump and pumps it through the oil cooler (11) and the high efficiency filter (12) giving cool clean oil
to the bearings, the gears and the compressor’s element jackets.
QUOTATION
Quote Number: 4969725
Date: 15/03/2024
Air Circuit
• Air inlet silencer
• Inlet Air filter
• Inlet throttle valve with integrated blow off valve and blow off silencer
• Low pressure element
• High pressure element
• Aluminium brazed plate air-cooled intercooler and aftercooler with stainless steel pre-cooler
• Water separators with moisture trap
• Electronic drains
• Pressure safety valves
• Pulsation damper
• Check valve
• DIN or ANSI connecting flanges.
• For Full Feature variant (FF) - Integrated MD dryer, including the motor, gearbox, drying rotor,
air-cooled regeneration air cooler and a water separator with electronic drain
SUMMARY OF INVESTMENT
ITEM
ITEM / DESCRIPTION ITEM VALUE QTY TOTAL INVESTMENT
#
ZT250VSD-8.6 ML 440/60
1 USD 266,685.00 1 USD 266,685.00
Screw Type Oil Free Air Compressor
F1250A-460/60
2 USD 18,860.00 1 USD 18,860.00
Refrigeration Type Aur Dryer
DD1600+F ASME
3 USD 8,165.00 1 USD 8,165.00
Pre-Filter
PD1600+F ASME
4 USD 8,165.00 1 USD 8,165.00
Post Filter
WARRANTY: One (1) year from the date of commissioning or 18 months from the date of delivery
(invoice); whichever comes first under normal use.
On elements: Five (5) year full warranty on element upon enrollment on Atlas Copco
Service Plan* for five (5) consecutive years from date of start-up and commissioning.
DELIVERY: 13 to 14 weeks Ex works and 45 days shipment for the date of confirmed order.
PAYMENT: 50% down payment; 40% before shipment; 10% balance against delivery.
EDUARDO DE WINTER
General Manager
___________________________
(Authorized Signature)
Conforme
"We are committed to sustainable productivity through the values of interaction, commitment and
innovation
QUOTATION
Quote Number: 4969725
Date: 15/03/2024
Additional Benefits
A. TECHNICAL SUPERVISION
ATLAS COPCO (PHILS), INC. shall provide technical drawings of a proposed installation of the above
equipment for your company.
ATLAS COPCO Service Technician shall conduct start-up and commissioning of the above equipment
once the installation is completed.
C.2. Consumable spare parts are available, ex-stock from our warehouse.
For non-stock items, delivery is foreseen within 10 working days from order placement.
C.3. Our Service Engineer shall conduct quarterly visit of your equipment during the duration of
the
warranty to ensure an efficient and reliable compressed air system operations.
D. TRAINING
Available upon request after the start-up and commissioning of the machine.
QUOTATION
Quote Number: 4969725
Date: 15/03/2024
CONDITIONS OF SALE
(d) "Goods" shall mean the product(s) to be supplied under the 7. Any queries on the invoice must be raised in writing within fourteen
Contract. (14) days of the date of the invoice, giving full details of the invoice
concerned, including the invoice number, the serial number(s) of the
Goods purchased and any other details necessary for the
identification of the invoice concerned. Interest at the rate of 1½%
2. QUOTATIONS. Unless otherwise stated the Company’s tender or
per month. shall be charged on any amount(s) unpaid commencing
quotation shall be valid for a period of thirty (30) days from date of
issue, after which time acceptance of any order placed shall be from the due date until full settlement of the same. All sales are on
subject to written confirmation. The date of acceptance shall be the the terms & conditions hereof except as amended and signed on
date upon which notice in writing of acceptance by the Customer behalf of the company.
of a tender or quotation is received by the Company.
16. WORK ON CUSTOMER’S PREMISES. Except where otherwise 22. GOVERNING LAW AND JURISDICTION. The Contract shall be
arranged, should work of any kind be carried out by the Company governed by and construed in accordance with the laws of the
on the Customer’s premises or any other premises or property, the Philippines and the Customer hereby submits to the non-exclusive
Company shall not be liable for any loss or damage occasioned to jurisdiction of the courts of the Philippines.
the purchaser or to his employees arising from any cause
whatsoever connected in any way with such work.