Professional Documents
Culture Documents
www.philips.com/welcome
HTS3510
HTS3520
Contents 8 Product specifications 16
English
1 Notice 4 9 Troubleshooting 18
Copyright 4
About Progressive Scan 4 10 Index 19
Trademarks 4
2 Important 5
Safety 5
Product care 5
Disposal of your old product and batteries 6
6 Change settings 14
Access the setup menu 14
Change general settings 14
Change audio settings 14
Change video settings 15
Change preference settings 15
7 Update software 16
Check software version 16
Update software from a CD-R or USB 16
EN 3
1 Notice ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified device must be registered in
order to play DivX Video-on-Demand (VOD)
Copyright content. To generate the registration code,
locate the DivX VOD section in your device
setup menu. Go to vod.divx.com with this code
to complete the registration process and learn
more about DivX VOD.
CLASS 1
LASER PRODUCT
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
4 EN
2 Important • Never place the product or any objects
on power cords or on other electrical
equipment.
English
Read and understand all instructions before you • If the product is transported in
use your home theater. If damage is caused by temperatures below 5°C, unpack the
failure to follow instructions, the warranty does product and wait until its temperature
not apply. matches room temperature before
connecting it to the power outlet.
• Visible and invisible laser radiation when
Safety open. Avoid exposure to beam.
• Do not touch the disc optical lens inside the
Risk of electric shock or fire! disc compartment.
• Never expose the product and accessories Risk of overheating!
to rain or water. Never place liquid • Never install this product in a confined
containers, such as vases, near the product. space. Always leave a space of at least four
If liquids are spilt on or into the product, inches around the product for ventilation.
disconnect it from the power outlet Ensure curtains or other objects never
immediately. Contact Philips Consumer cover the ventilation slots on the product.
Care to have the product checked before Risk of contamination!
use. • Do not mix batteries (old and new or
• Never place the product and accessories carbon and alkaline, etc.).
near naked flames or other heat sources, • Remove batteries if they are exhausted or
including direct sunlight. if the remote control is not to be used for a
• Never insert objects into the ventilation long time.
slots or other openings on the product. • Batteries contain chemical substances, they
• Where the mains plug or an appliance should be disposed of properly.
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable. Product care
• Disconnect the product from the power
outlet before lightning storms. • Do not insert any objects other than discs
• When you disconnect the power cord, into the disc compartment.
always pull the plug, never the cable. • Do not insert warped or cracked discs into
Risk of short circuit or fire! the disc compartment.
• Before you connect the product to the • Remove discs from the disc compartment
power outlet, ensure that the power if you are not using the product for an
voltage matches the value printed on the extended period of time.
back or bottom of the product. Never • Only use microfiber cloth to clean the
connect the product to the power outlet if product.
the voltage is different.
Risk of injury or damage to the home theater!
• For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
• For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
EN 5
Disposal of your old product 3 Your home theater
and batteries
Congratulations on your purchase, and welcome
to Philips! To fully benefit from the support that
Philips offers, register your home theater at www.
philips.com/welcome.
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused. Main unit
6 EN
Remote control e (Navigation buttons)
• Navigate menus.
• In video mode, press left or right to
English
fast backward or fast forward.
a • In radio mode, press left or right to
search a radio station; press up or
down to fine tune a radio frequency.
b
f INFO
c Displays information about what is playing.
u
d g Playback buttons
Control playback.
t h SURR (Surround Sound)
e Switches to surround sound or stereo
sound.
i AUDIO SYNC
s f • Selects an audio language or channel.
• Press and hold to synchronize audio
with video. Use with +/-.
g j Numeric buttons
r Selects an item to play.
h k SUBTITLE
Selects subtitle language for video.
q
i l VOCAL
p Turns off or on the vocal by changing the
audio channel.
j m MIC VOL +/-
Increases or decreases microphone volume.
n KARAOKE
o k Toggles through various karaoke options.
n l o CREATE MP3 / ZOOM
m • Accesses the menu to create MP3.
• Zooms into a video scene or picture.
p SOUND
Selects a sound mode.
q VOL +/-
Increases or decreases volume.
a (Standby-On) r (Mute)
Switches the home theater on or to Mutes or restores volume.
standby. s BACK
b OPEN/CLOSE Returns to a previous menu screen.
Opens or closes the disc compartment. t OK
c REPEAT / PROGRAM Confirms an entry or selection.
• Selects or turns off repeat mode. u Source buttons
• In radio mode, program radio stations. • AUDIO SOURCE: Selects an audio
d SETUP input source.
Accesses or exits the setup menu. • RADIO: Switches to FM radio.
• USB: Switches to USB storage device.
• DISC: Switches to disc source.
EN 7
4 Connect your home b SPEAKERS
Connects to the supplied speakers and
theater subwoofer.
c HDMI OUT
This section helps you connect your home theater Connects to the HDMI input on the TV.
to a TV and other devices. The basic connections d VIDEO OUT-VIDEO
of the home theater with its accessories are Connects to the composite video input on
provided in the Quick Start. For a comprehensive the TV.
interactive guide, see www.connectivityguide.
e AUDIO IN-AUX
philips.com.
Connects to the analog audio output on the
TV or an analog device.
Note
f FM ANTENNA
•• Refer to the type plate at the back or bottom Connects the FM antenna for radio
of the product for identification and supply reception.
ratings.
•• Before you make or change any connections, g COMPONENT VIDEO OUT-Y Pb Pr
ensure that all devices are disconnected from Connects to the component video input on
the power outlet. the TV.
Connect to the TV
Connectors
Connect your home theater directly to a TV
Connect other devices to your home theater. through one of the following connectors (from
highest to basic quality video):
Back connectors
TV
a AC MAINS~
Connects to the power supply.
8 EN
Option 2: Connect to the TV through Connect audio from TV or
YPbPr (component video)
other devices
English
Note Use your home theater to play audio from the
•• The component video cable or connector TV or other device such as a cable box.
might be labeled Y Cb Cr or YUV.
Tip
(Cable not supplied)
•• Press AUDIO SOURCE to select the audio
output of your connection.
Component Video Out
TV
TV
Component Video In
Connect a microphone
(Microphone not supplied)
Option 3: Connect to the TV through
composite video (CVBS)
Note
Note
TV
•• For best compatibility and sound quality, we
recommend that you contact Philips retailer
to order microphone models : SBCMD110 or
SBCMD195.
EN 9
5 Use your home Change surround sound mode
Experience an immersive audio experience with
theater surround sound modes.
English
video. karaoke disc.
Note Note
•• Available video options depend on the video •• Ensure that a microphone (not supplied) is
source. connected to the MIC connector on this home
theater before play.
•• Set the microphone volume to the minimum
Button Action level before connecting the microphone to
prevent howling.
/ Searches slow-backward or
slow-forward. Press repeatedly to
change the search speed. Button Action
For VCD/SVCD, slow-backward
search is not available. KARAOKE Toggles through various karaoke
options.
AUDIO Selects an audio language or [Mic Off]/[Mic On] – Press
SYNC channel. to turn on or off the microphone
SUBTITLE Selects subtitle language for video. output.
INFO Displays information about what [Vol 20] – Press to set the
is playing. default microphone volume level.
REPEAT Repeats a chapter or title. [Echo +15] – Press to set the
echo level.
[Key] – Press to set the pitch
level that match your voice.
Use picture options [Karaoke Scoring] – Press to
set karaoke scoring when playback
Access several useful features while viewing
a DVD or VCD.
pictures.
MIC VOL Increases or decreases
Button Action +/- microphone volume.
VOCAL Turns off or on the vocal by
/ Flips the photo vertically or
changing the audio channel.
horizontally.
/ Rotates the picture counter-
clockwise or clockwise.
/ Skips to the previous or next Play from a USB storage device
picture.
REPEAT Repeats a single file in the folder The home theater is fitted with a USB connector
or repeats the entire folder. that allows you to view pictures, listen to music or
watch movies stored on a USB storage device.
INFO Displays photo albums in a
thumbnail overview. 1 Connect the USB storage device to the
home theater.
2 Press USB.
Use audio options »» A content browser appears.
EN 11
Quick skip play to a specific time
Note
Quick skip to a specific part of a video by
•• If the USB storage device does not fit into the entering the time of a scene.
connector, use a USB extension cable.
•• The home theater does not support digital 1 During video play, press INFO.
cameras that need a computer program to
display photos.
2 Press the Navigation buttons and OK to
select:
•• The USB storage device must be FAT or DOS-
formatted, and Mass Storage Class compliant. • [TT Time] : Title time.
• [Ch Time] : Chapter time.
• [Disc Time] : Disc time.
• [Track Time] : Track time.
More play features for disc or 3 Enter the time of the scene, then press OK.
USB
Repeat play a specific section
Several advanced features are available for video
or picture playback from a disc or USB storage Select sections of audio or video for repeat
device. playback.
1 During playback, press INFO.
12 EN
Button Action 2 Connect a USB storage device to the home
/ Selects a preset radio station. theater.
3
English
/ Searches for a radio station. When audio is played, press CREATE MP3.
Fine tunes a radio frequency. 4 Select [Yes] and press OK to confirm.
Press and hold to erase the
preset radio station. CREATE MP3
Press to stop the installation of OPTIONS TRACK
radio stations. Track01 04:14
Speed Normal
PROGRAM Manual: Press once to access Track02 04:17
Bitrate 128kbps
program mode, and press again Track03 03:58
to store the radio station. CRT ID3 Yes
Track04 04:51
Automatic: Press and hold for Device USB1
five seconds to reinstall radio Track05 03:53
stations. SUMMARY Track06 04:09
Select Track 0 Track07 04:38
Note Time 00:00
•• AM and digital radio are not supported. Start Exit Select All Deselect All
•• If no stereo signal is detected, you are
prompted to install the radio stations again. 5 Select the settings in the [OPTIONS] panel,
•• For the best reception, place the antenna away then press OK.
from the TV or other sources of radiation.
• [Speed] : Selects the write-to-file
speed.
• [Bitrate] : Selects the conversion
Change tuning grid quality.
• [CRT ID3] : Copies information on the
In some countries, you can switch the FM tuning tracks in the MP3 files.
grid between 50 kHz and 100 kHz. Changing • [Device] : Selects the USB device
tuning grid erases all preset radio stations. which you use to store the MP3 files.
1 Press RADIO. 6 Press to access the [TRACK] panel.
2 Press . 7 Select an audio track, then press OK.
3 Press and hold until ‘GRID 9’ (50 kHz) • [Select All] : Selects all tracks.
or ‘GRID 10’ (100 kHz) is displayed. • [Deselect all] : De-selects all tracks.
8 Select [Start] in the menu to convert, then
press OK.
Play audio from TV or other »» A new folder is created in the USB
devices storage device to store all the new MP3
audio files.
Press AUDIO SOURCE repeatedly to select • To exit the menu, select [Exit] and
the audio output of the connected device (see press OK.
‘Connect audio from TV or other devices’ on
page 9). Note
EN 13
6 Change settings Change general settings
This section helps you to change the settings of 1 Press SETUP.
your home theater. 2 Select [General Setup], then press OK.
3 Select and adjust the following settings:
Caution • [Disc Lock] : Restricts play to disc.
•• Most of the settings are already configured Password (PIN code) is required to
with the best value for the home theater. unlock the disc before play.
Unless you have a specific reason to change a • [Display Dim] : Changes the brightness
setting, it is best to leave it at the default value. of the display panel.
• [OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
Access the setup menu screen saver mode. If enabled, the
screen enters idle mode after 10
1 Press SETUP. minutes of inactivity (for example, in
»» The following menu appears. pause or stop mode).
• [Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
Symbol Description after a specific time.
[General Setup] • [Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
[Audio Setup] minutes of inactivity (for example, in
pause or stop mode).
[Video Setup] • [DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theater.
[Preference Setup] 4 Press OK to confirm your choice.
Note
2 Select a setup menu, then press OK.
•• Before you purchase DivX videos and play
See the following sections for information them on the home theater, register the home
about how to change the settings of your theater on www.divx.com using the DivX
home theater. VOD code.
3 Press BACK to return to the previous
menu, or press SETUP to exit.
Note
Change audio settings
•• You cannot change a setting that is grayed out. 1 Press SETUP.
2 Select [Audio Setup], then press OK.
3 Select and adjust the following settings:
• [Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
• [Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
14 EN
• [HDMI Audio] : Enables or disables
HDMI audio output for the TV.
Change preference settings
• [Audio Sync] : Sets a delay for audio
1
English
output when you play a video disc. Press SETUP.
• [Prologic II Mode] : Selects a 5.1 2 Select [Preference Setup], then press OK.
surround sound mode to suit your
video or music.
3 Select and adjust the following settings:
• [Audio] : Selects audio language for
4 Press OK to confirm your choice. video.
• [Subtitle] : Selects subtitle language for
Note video.
• [Disc Menu] : Selects menu language
•• For settings related to HDMI, the TV must be for video disc.
connected through HDMI. • [Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
Change video settings • [PBC] : Displays or skips the content
menu for VCD and SVCD discs.
1 Press SETUP. • [MP3/JPEG Display] : Displays the
2 Select [Video Setup], then press OK. MP3/JPEG folders or all the files.
3 Select and adjust the following settings:
• [Password] : Sets or changes a PIN
code to play a restricted disc. Enter
• [TV System] : Selects a TV system that ‘0000’ if you do not have a PIN or if
is compatible with the TV. you have forgotten your PIN.
• [TV Display] : Selects a picture display • [DivX Subtitle] : Selects a character
format to fit the TV screen. set that supports the DivX subtitle.
• [Picture Settings] : Selects a • [Version Info.] : Displays the software
predefined color setting. version for the home theater.
• [HDMI Setup] : Selects HDMI video • [Default] : Resets the home theater to
resolution and the wide screen display the default settings programmed at the
format for the TV. The Wide Screen factory.
Display option is only available for 16:9
wide screen TV display setting.
4 Press OK to confirm your choice.
• [Progressive] : Enables or disables
progressive scan mode. Note
• [HD JPEG] : Enables or disables display
of high definition JPEG images. •• If your preferred disc language is not available,
4 Press OK to confirm your choice.
you can select [Others] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
Note •• If you select a language that is not available
on a disc, the home theater uses the default
•• The best setting is automatically selected for language of the disc.
the TV. If you need to change the setting, •• You cannot reset disc lock, password (PIN
ensure that the TV supports the new setting. code) and parental control settings to their
•• Some video settings depend on the video default values.
source, ensure that the disc and the TV
support the setting or feature.
•• For settings related to HDMI, the TV must be
connected through HDMI.
•• For settings related to progressive or
component video, the TV must be connected
through Component Video.
EN 15
7 Update software 8 Product
To check for new updates, compare the current specifications
software version of your home theater with the
latest software version (if available) on the Philips
web site. Note
Region code
1 Press SETUP.
The type plate on the back or bottom of the
2 Select [Preference Setup] > [Version Info.], home theater shows which regions it supports
then press OK.
»» The software version is displayed. Country DVD
Europe, United Kingdom
Update software from a CD-R
or USB Asia Pacific, Taiwan, Korea
1 Check for the latest software version on
www.philips.com/support. Latin America
• Search for your model and click on
‘software&drivers’.
2 Download the software onto a CD-R or Australia, New Zealand
USB storage device.
3 Insert the CD-R or connect the USB
storage device to the home theater. Russia, India
4 Follow the instructions on the TV to
confirm the update.
»» When complete, the home theater China
automatically switches off and on again.
• If not, disconnect the power cord for a few
seconds and then reconnect it. Playback media
DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R
Caution DL, CD-R/CD-RW, Audio CD, Video CD/SVCD,
Picture CD, MP3-CD, WMA-CD, DivX-CD, USB
•• Do not turn off the power or remove the storage device
CD-R or USB storage device when the
software update is in progress because you File Format
might damage the home theater. •• Audio: .mp3, .wma
•• Video: .divx, .divx ultra, .mpeg, .mpg
•• Picture: .jpeg, .jpg
16 EN
Amplifier Speakers
•• Total output power: •• System: full range satellite
• HTS3510: 300 W RMS (30% THD) •• Speaker impedance: 8 ohm (center), 4 ohm
English
• HTS3520: 600 W RMS (30% THD) (Front/Rear)
•• Frequency response: 20 Hz-20 kHz •• Speaker drivers: 3” full range
•• Signal-to-noise ratio: > 65 dB (CCIR) / •• Frequency response: 150 Hz-20 kHz
(A-weighted) •• Dimensions (WxHxD):
•• Input sensitivity: • Center: 160.9 x 95 x 92 (mm)
• AUX: 2 V • Front/Rear: 95 x 160.9 x 87 (mm)
Video •• Weight:
•• Signal system: PAL / NTSC • Center: 0.77 kg
•• HDMI output: 480i/576i, 480p/576p, 720p, • HTS3510 - Front/Rear: 0.56 kg/each
1080i, 1080p • HTS3520 - Front/Rear: 0.68 kg/each
Audio •• Cable length:
•• Sampling frequency: • Center: 2 m
• MP3: 32 kHz, 44.1 kHz, 48 kHz • Front: 3 m
• WMA: 44.1 kHz, 48 kHz • Rear: 10 m
•• Constant bit rate: Laser specification
• MP3: 112 kbps - 320 kbps •• Type: Semiconductor laser GaAIAs (CD)
• WMA: 64 kbps - 192 kbps •• Wave length: 645 - 665 nm (DVD), 770 -
Radio 800 nm (CD)
•• Tuning range: FM 87.5-108 MHz (50/100 •• Output power: 6 mW (DVD), 7 mW
kHz) (VCD/CD)
•• Signal-to-noise ratio: FM 50 dB •• Beam divergence: 60 degrees.
•• Frequency response: FM 180 Hz-10 kHz
USB
•• Compatibility: Hi-Speed USB (2.0)
•• Class support: UMS (USB Mass Storage
Class)
•• File system: FAT12, FAT16, FAT32
•• Maximum memory support: < 160GB
Main Unit
•• Power supply:
• Latin America/Asia Pacific: 110-240V,
~50-60Hz
• China/Russia/India: 220-240V, ~50Hz
•• Power consumption:
• HTS3510: 60 W
• HTS3520: 100 W
•• Standby power consumption: ≤ 0.9 W
•• Dimensions (WxHxD): 360 x 58 x 320
(mm)
•• Weight: 2.84 kg
Subwoofer
•• Impedance: 8 ohm
•• Speaker drivers: 165 mm (6.5”) woofer
•• Dimensions (WxHxD): 122.6 x 307 x 369
(mm)
•• Weight: 3.84 kg
•• Cable length: 3 m
EN 17
9 Troubleshooting Sound
No sound.
•• Ensure that the audio cables are connected
Warning and select the correct input source (for
example, AUDIO SOURCE) for the device
•• Risk of electric shock. Never remove the you want to play.
casing of the product.
No sound on HDMI connection.
To keep the warranty valid, never try to repair the •• You might not hear any sound if the
product yourself. connected device is not HDCP (High-
bandwidth Digital Content Protection)
If you have problems using this product, check the
compliant or only DVI compatible. Use an
following points before you request service. If you
analog or digital audio connection.
still have a problem, register your product and get
support at www.philips.com/welcome. •• Ensure that the [HDMI Audio] is enabled.
If you contact Philips, you will be asked for the No sound from TV program.
model and serial number of your product. The •• Connect an audio cable from the audio
model number and serial number are on the back input on the home theater to the audio
or bottom of your product. Write the numbers output on the TV, then press AUDIO
here: SOURCE repeatedly to select the correct
audio source.
Model No. __________________________
Distorted sound or echo.
Serial No. ___________________________
•• Ensure that the TV volume is muted or set
to minimum if you are playing audio through
Main unit the home theater.
Audio and video are not synchronized.
The buttons on this home theater do not work. •• 1) Press and hold AUDIO SYNC. 2) Press
•• Disconnect the home theater from the +/- within five seconds.
power outlet for a few minutes, then
reconnect.
Play
Picture Disc cannot be played.
•• Clean the disc.
No picture. •• Ensure that the home theater supports the
•• Ensure that the TV is switched to the disc (see ‘Product specifications’ on page
correct source for this home theater. 16).
•• If this happens when you change the TV •• Ensure that the home theater supports the
system, switch to its default mode: 1) Press region code of the DVD.
to open the disc compartment. 2) Press
the Numeric buttons’3’. •• For DVD±RW or DVD±R, ensure that the
disc is finalized.
•• If this happens when you switch on the
progressive scan mode, switch to its DivX video files cannot be played.
default mode: 1) Press to open the •• Ensure that the DivX file is encoded
disc compartment. 2) Press the Numeric according to the ‘Home Theater Profile’
buttons’1’. with the DivX encoder.
No picture on HDMI connection. •• Ensure that the DivX video file is complete.
•• Check if the HDMI cable is faulty. Replace DivX subtitles do not display correctly.
with a new HDMI cable. •• Ensure that the subtitle file name is the
•• If this happens when you change the HDMI same as the movie file name.
video resolution, switch to its default mode: •• Select the correct character set: 1) Press
1) Press to open the disc compartment. SETUP. 2) Select [Preference Setup].
2) Press the Numeric buttons ‘1’. 3) Select [DivX Subtitle]. 4) Select a
supported character set. 5) Press OK.
18 EN
The contents of a USB storage device cannot be
read. 10 Index
•• Ensure that the format of the USB storage
English
device is compatible with the home theater
(see ‘Product specifications’ on page 16).
A
amplifier 16
•• Ensure that the USB storage device audio
is formatted with a file system that is connection 9
supported by the home theater (note that language 11, 15
NTFS is not supported). synchronize with video 12
‘No entry’ or ‘x’ sign appears on the TV.
•• The operation is not possible.
C
care 5
change settings 14
connect
audio from TV 9, 13
guide 8
microphone 9
other devices 9
TV 8
connectors 8
contact us 18
D
disc
play 10
supported discs 16
disposal of your product 6
DivX
subtitle 15
F
file formats 16
K
karaoke
microphone 9
L
language
audio 15
disc menu 15
on-screen display 14
subtitle 15
M
MP3
create MP3 files 13
EN 19
O T
overview time search video 12
connectors 8 troubleshooting 18
main unit 6 TV
remote control 7 audio from TV 9, 13
connect 8
P
password 15 U
picture USB
slide show 12 play 11
troubleshooting 18 software update 16
play
disc 10
options 10 V
radio 12 video
troubleshooting 18 options 11
USB storage device 11 settings 15
product care 5 synchronize with audio 12
product specifications 16
progressive scan 4
R
radio
play 12
program 12
tune 12
tuning grid 13
recycle 6
region code 16
remote control 7
repeat 10, 12
S
safety 5
settings
general 14
parental control 15
preferences 15
restore factory settings 15
video 15
slideshow
play musical slideshow 12
software
update 16
version 16
sound
mode 10
surround 10
troubleshooting 18
subtitle
language 11
20 EN
Language Code
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
sgpjp_1132/55_v8