Professional Documents
Culture Documents
net/publication/336931853
Article in IOP Conference Series Materials Science and Engineering · October 2019
DOI: 10.1088/1757-899X/659/1/012021
CITATIONS READS
13 741
3 authors:
Belete Sirabizuh
Addis Ababa Science and Technology University
35 PUBLICATIONS 467 CITATIONS
SEE PROFILE
All content following this page was uploaded by Yohannes Regassa on 01 November 2019.
Bus. Horiz
Additive Manufacturing and 3D Printing State of the Industry
Dent. Mater.
Compos. Struct.
Compos. Part B:
Eng.
Rapid Prototyping J.
Rapid Prototyping J.
Rapid Prototyping J.
Influence of 3D printing FDM process parameters on tensile
property of ULTEM 9085
Mater.,
On opportunities and limitations of additive manufacturing technology for
industry 4.0 era
Compos.
PLoS ONE
Manuf. Rev.
Mech. Eng.
Autom. Constr.
Mater. Des.
Mater. Struct.
Autom. Constr.
Dental Mater.
Standard Terminology for Additive Manufacturing – General Principles
– Terminology
CIRP Annals