The provided setup requires one of the following Windows installation
- Windows 10 (32/64Bit) - Windows 10 LTSC(2019) (64 bit) - Windows 11 - Windows Server 2019
- Note for Windows XP/Vista/Windows7/Windows8/8.1
Windows versions XP, Vista, Windows7, Windows8/8.1 are no longer supported.
- Note for use with Windows 10/Server 2019
The provided setup requires an installation of .NET framework 2.0 or .NET framework 3.5. Both frameworks are not included within a standard Windows 10 installation. Users have to install the .NET framework 3.5 themselves by using the "Feature-Dialog" from the operating system. The installation of the framework requires an internet access or the original installation medium of the operating system.
- Note for use with Remote-I/O systems
The default length of HART-frames for this VEGA-DTM has been increased to 128 Bytes. Some Remote-I/O systems might have problems with large HART-frames, so if the VEGA-DTM isn�t able to establish a connection to a field device, it reduces the length of the communicated HART-frames automatically. If the problem still exists, users may change the default length of HART-frames With the VEGA-DTM Tool "VEGA DTM-Configurator".
-Note for use with Windows Server 2016
The VEGA-DTM library is tested and released for operation in Windows Server 2016. Support of server features is limited to the FDT 1.2.1 specification features.