Professional Documents
Culture Documents
Fosroc India Waterproofing Brochure
Fosroc India Waterproofing Brochure
Waterproofing Solutions
Fosroc has four state-of-the-art manufacturing facilities at Bengaluru, Karnataka; Ankleshwar, Gujarat; Kolkata,
West Bengal and Keshwana, Rajasthan. Waterproofing product range 4
Waterproofing solutions 5
Fosroc Chemicals (India) Pvt. Ltd. works closely with its customers, including distribution and Applicator
Below ground waterproofing 6 -14
associates, through its well-equipped technical service department, a network of sales engineers, customer
Proofex Engage System 7
service professionals, Concrete technologist, Specification team etc. Fosroc India prides itself for the level of
technical and customer support that it gives to its valued customers.
Fosroc Membrane HDPE-P System 8
Fosroc Proofex 3000 9
Proofex PGP System 9
Proofex Torchseal System 10
Proofex Self Adhesive System 11
Proofex Self Adhesive Geotext System 12
Nitocote CM210 System 13
Brushbond TGP System 13
Conplast crystalline 13
Nitoproof 100/120 System 14
Fosroc Polyurea WH200/GR 14
Above ground waterproofing 15-21
Roof Slab 15
Production Selection Chart - Roof Slab 15
Brushbond RFX/Brushbond 16
Brushcrete/Hydroproof XTRA System 16
Proofex Torchseal System 17
International leverage gives Fosroc the Fosroc Chemicals (India) Pvt. Ltd. remains
Brushbond Ti Flexicoat System 18
opportunity to offer tried and tested focused on the Industry, Infrastructure Nitoproof 600 Standard System 18
solutions from one geographical region to and Building Segment with a wide range of Nitoproof 600 PF 19 International
another with great confidence. quality products. Brushbond Roofguard System 19
Admixtures and Surface Treatments Proofex Self Adhesive System 20 leaders
Fosroc Chemicals (India) Pvt. Ltd. provides Proofex PGP System 20
time-tested solutions that include services Grouts and Anchors
Proofex ORG/OGP System 21
in delivering
such as: Industrial Flooring
Concrete Repair
Wet Areas 22 constructive
Diagnosis and Specification Support
Protective Coatings
Greenroof and Podium 22 solutions
Application Support
Landscape Waterproofing 23
Distribution Support Joint Sealants and Adhesives
Fosroc Polyurea WH 200/GR 24
After-Sales Service Waterproofing
Product Selection chart – landscape waterproofing 25
Mix design support Cement Additives
Water retaining structure 26-27
Product range
02
2 www.fosroc.com www.fosroc.com 03
Fosroc has vast experience in providing constructive solutions to many
Integral waterproofing admixture Proofex ORG
iconic building structures around the world has been built on a broad
Conplast X421IC/WL Loose laid reinforced TPO waterproofing
portfolio of products. These include waterproof membranes, waterstops,
Integral waterproofing liquid admixture membrane
joint sealants, concrete repair mortars, resin flooring, protective coatings,
for concrete and mortar Proofex OGP structural strengthening, grouts and concrete admixtures manufactured
Conplast WP90 Loose laid synthetic TPO waterproofing to the highest quality standards backed by independent test certificates.
Integral waterproofing powder additive membrane
for concrete/mortar Proofex OFB At Fosroc, we recommend the best technology for each project rather
Liquid applied cement based Fleece-backed fully bonded synthetic than being driven by one particular response. We liaise and evaluate with
waterproofing systems TPO waterproofing membrane our customers the most appropriate solution for what they are trying to
Brushbond Proofex Engage (BBA Appoved) achieve. We just want to deliver what is best to the customer providing
Elastometric acrylic modified cementitious Pre-applied waterproofing membrane peer-to-peer based solutions for engineering problems to ultimately
coating for concrete and masonry surface conforming to the requirements of find a number of ways to create value.
Brushbond RFX BS EN 13967:2004 and BS 8102:2009
We have a full range of world-class waterproofing systems providing the
High performance elastomeric cementitious Proofex Sheet Drain most up-to-date technologies from basement to roof to ensure long-lasting
coating Geocomposite HDPE drainage and integrity and durability of your building structure.
Brushbond Roofguard protection membrane
High build fibre reinforced acrylic waterproof Fosroc Membrane HDPE-P System
coating Pre-applied HDPE pressure sensitive Below ground waterproofing
Brushcrete/Hydroproof Xtra adhesive waterproofing membrane
Acrylic polymer for concrete and masonry Fosroc Proofex 3000 Above ground waterproofing
Nitocote CM210 High performance waterproofing and
radon barrier membrane for basements
Two-component acrylic polymer modified, and structures
Roof Slab
elastomeric cementitious coating
Polyurea spray applied coating Wet Areas
Crystalline waterproofing system Fosroc Polyurea WPE
Brushbond TGP Fast setting, pure polyurea elastomeric
Crystalline capillary waterproofing system for Greenroof and Podium
waterproof coating
concrete substrates Fosroc Polyurea WH 200/GR
Conplast Crystalline Water retaining structure
Fast setting, hybrid polyurea elastomeric
Integral waterproofing admixture based waterproof coating
on crystalline formation to produce water
tight concrete. Waterstops Roof waterproofing
Supercast PVC Coatings
Bituminous waterproof coating
Nitoproof 100 - 120 Centrally and externally placed PVC waterstops
High build bituminous waterproofing coating
Supercast SW10 Balcony waterproofing
Swellable waterstop for in-situ concrete Wet areas waterproofing
Pitch modified PU waterproof coating
Supercast SW20
Nitoproof 600 Standard
Swellable waterstop for in-situ concrete Flooring
Liquid applied single component elastomeric
waterproofing coating Supercast SW30 Joint sealants &
filler boards
Pitch Free PU waterproof coating High swell hydrophilic waterstop Green roof waterproofing
Nitoproof 600 PF for in-situ concrete
Liquid applied single component Supercast SW Adhesive
Podium waterproofing
elastomeric waterproofing membrane Problem solving gun grade hydrophilic
Solar reflective & thermal insulating sealant and adhesive
coating Injection hose system
Brushbond Ti Flexicoat Supercast Predimax Injection Hose
Elastomeric acrylic polymer based solar Injection hose for protection against potential Water containment
reflective and insulating coating and active leaks in construction and cold
Sheet membranes joints in concrete
Basement waterproofing
Proofex Torchseal Systems Cementitious micro concrete
Torch applied waterproofing membrane Renderoc RG Admixtures
Proofex Self Adhesive Systems General purpose, non-shrink, cementitious
Cold applied Self Adhesive waterproofing micro-concrete
membrane Epoxy micro concrete
Proofex PGP Supercast EPT
Loose laid PVC waterproofing membrane Piletop encapsulation resin system
4
www.fosroc.com www.fosroc.com 5
Fosroc’s innovative below ground waterproofing and design processes with designers, specialists
systems comply with recognised guidelines, and manufacturers establishing and maintaining Proofex Engage system
providing clients with the most cost-effective effective channels of communication, by being
solutions possible which have been proven successful involved at the early stages of any project.
over a long number of years for all types of below
ground construction. An ever increasing level of importance is being placed
by clients and designers with regards to structural
Fosroc below ground waterproofing systems are integrity, cost-effectiveness and durability. Fosroc
fully compatible, giving designers peace of mind recognises this and offers an unparalleled range of
and assured quality from a single source, waterproofing solutions for below ground structures
worldwide company. to combat these demands, providing clients with high For below ground structures where the exterior face of the structural concrete is inaccessible, the waterproofing
performance products backed by excellent customer/ must be applied prior to pouring the concrete. Conventional systems are either loose-laid or self-adhering to the
Waterproofing is required each time a structure is built technical service delivered through a comprehensive
below ground and especially where the water table is substrate not the structural concrete. This means there is no seal between the waterproofing and the structural
international network. concrete which can lead to water travelling between the waterproofing and the structure from any leakages that
permanently above the underside of the basement floor
level. A high water table causes hydrostatic pressures BS8102:2009 may occur. BS8102:2009 highlights this problem and recommends that a fully-bonded pre-applied waterproofing
to be exerted underneath basement floors and against system be used to mitigate this risk. A similar problem occurs where ground settlement takes place.
basement walls. This hydrostatic pressure forces water The recently revised BS8102:2009 standard for
water-proofing below ground structures, gives Fosroc has developed an innovative system, Proofex Engage, which incorporates a unique cell mesh which
into the building through cracks, joints and any porous mechanically bonds to freshly placed concrete giving a tenacious waterproof seal, preventing water migration
substrates causing possible major structural damage recommendations and provides guidance on methods
of dealing with and preventing the entry of water from even if ground settlement occurs. It is installed rapidly with no need for blinding concrete, priming or protection
and is likely to contribute to mould, corrosion and other and can be trafficked immediately after application. It is also gas-resistant and highly durable and is unaffected by
moisture related problems. surrounding ground into a structure below ground level.
Designers are encouraged to follow a process chart, contaminants within the ground. Quality is assured through BBA and EN13967:2004 and the system is suitable for
To minimise risk, strategies for dealing with to ensure that the correct waterproofing system will be use in accordance with BS8102:2009 Grades 1, 2 and 3.
ground water, soil gases and contaminants should be selected. Some of the recommendations are highlighted
considered from the earliest stages of the planning below:
No of Resistant to Bonding Screed
Products
Water table Life expectancy
basements ground chemicals with Concrete protection
Water table at ground Aggressive ground Mechanically bonded Do not require
Proofex Engage 3 basements Life expectancy > 15 years
level chemicals to concrete protection
Fosroc Membrane Water table at ground Aggressive ground Pressure sensitive Do not require
3 basements Life expectancy > 15 years
HDPE-P System level chemicals fully bonded system protection
Proofex Torchseal Water table above Resistance to ground Loose laid system No water-tracking
1 basement Require protection Life expectancy > 10 years
3PI/3SI the raft salts for raft Easy jointing and compatible full range of ancillaries
Integrity assured at pile caps
Proofex Self Adhesive Water table above Resistance to ground Loose laid system Do not require
2 basements Life expectancy > 10 years
Geotext the raft salts for raft protection Excellent solution for precast concrete
Protects structure against ground contaminants
Proofex Self Adhesive Water table above Resistance to ground Loose laid system
PR20
2 basements
the raft salts for raft
Require protection Life expectancy > 10 years Long-term watertight durability
Proofex Self Adhesive Water table above Resistance to ground Loose laid system
1 basement Require protection Life expectancy > 10 years
PR15 the raft salts for raft
Proofex 3000 is a cold applied, flexible, waterproof, high performance membrane incorporating a cross
Fosroc Membrane HDPE-P/Membrane HDPE-P(Smooth)RF is a pre-applied HDPE pressure sensitive adhesive laminated HDPE carrier film with a polymer modified bitumen compound.
waterproofing membrane which bond integrally to poured concrete, remaining in place if settlement of
substrate occurs. It is supplied with a self adhesive selvedge along one side of the roll to provide sealed laps and A high performance self adhesive membrane for a range of waterproofing and radon barrier applications
including basements and substructures. Proofex 3000 provides a vapour, radon and waterproof membrane
a comprehensive range of auxiliary products to simplify the application process. Fosroc Membrane HDPE-P/
to water excluding structures and protects concrete from attack by aggressive ground salts.
Membrane HDPE-P(Smooth)RF 1.2/1.5 mm provides water vapour protection to water excluding structures
and protects concrete from aggressive ground salts, chemicals and hydrocarbons.
Advantages
Resistant to ground water, soluble sulphates and
Fosroc Membrane HDPE-S is a post applied high performance self adhesive HDPE membrane for waterproofing Cross-laminated HDPE film for protection chlorides
application for retaining walls, RC members and basement substructures. Fosroc Membrane HDPE-S is supplied against damage
as a membrane with 1.2mm thickness having a self adhesive glue which helps in bonding to all the casted RC Suitable for waterproofing basements grades 2 and 3
Dimensionally stable as defined in BS 8102 : 2009, ‘Protection Of Structures
members
Combines toughness with flexibility for Against Water From The Ground’
detailing around corners Radon protection as defined by BRE report 211
Advantages Self adhesive layer system makes installation
Simple application - no primers or quick, simple and reliable
protection material required
Proofex PGP, a loose-laid PVC membranes system, is available in large rolls. Overlaps joining is realised
through welding with hot air. Compartments can be laid out using Supercast PVC waterstops which are
welded to the membranes. Provision for treatment of post leakages using re-injectable hose. Signal layers
Hot-air Shovel-gun Overlapping of Membrane HDPE-P Rolls
helps to identify and rectification of damages during installation.
Advantages
Rapid installation – available in large rolls
Welded joints for maximum watertightness
Compatible full range of ancillaries
Integrity assured at pile caps
Protects structure against ground contaminants
Long-term watertight durability
Good puncture resistant
Resistance to root penetration
8 www.fosroc.com www.fosroc.com 9
Proofex Torchseal system
Proofex PGP Proofex PGP Fitters Predimax Injection Hose PVC Roundels
Proofex Torchseal 3SI/3PI are 3 mm thick quality torch applied APP based slated/plain membranes
manufactured from premium grade modified bitumen, reinforced with a core of non-woven polyester
fabric weighing 160 g/m², rot-proof and is malleable. The core gives the membrane its excellent mechanical
properties, allows for good elongation and affords high resistance to piercing.
Proofex Torchseal 4SI/4PI are 4 mm thick quality torch applied APP-based slated/plain membranes
manufactured from premium grade modified bitumen, reinforced with a core of non-woven polyester
fabric weighing 160 g/m², rot-proof and are malleable. The core gives the membrane its excellent Proofex Self Adhesive PR15/20 is a 1.5/2 mm cold applied Self Adhesive sheet membrane comprising of a
mechanical properties, allows for good elongation and affords high resistance to piercing. polymer modified bitumen layer internally reinforced with polyester, bonded on to an outer surface of cross
laminated polyethylene film. The polymer bitumen adhesive layer is protected on the underside by a silicone
Advantages release paper which is removed just prior to the application of Proofex Self Adhesive PR15/20 to the tack coat
primed substrate. The applied membrane is then immediately protected from UV light and mechanical damage
High-strength reinforcement gives excellent Bonds well to the substrate during subsequent back filling by the application of Protection Board, or a sand/cement screed. It provides a
resistance to puncture and stress continuously bonded waterproof membrane for building and civil engineering structures.
Readily formed to contours
Easily torch applied
10 www.fosroc.com www.fosroc.com 11
Proofex Self Adhesive Geotext system Nitocote CM210 System
Crystalline System
Conplast Crystalline
Conplast Crystalline is an integral waterproofing admixture to produce water tight concrete. The active chemical
in Conplast Crystalline react with moisture available in concrete to produce non soluble crystalline formation
throughout the pores of capillary tracks thus making concrete permanently sealed against later penetration
from any direction.
12 www.fosroc.com www.fosroc.com 13
Nitoproof 100/120 System Roof slab
14 www.fosroc.com www.fosroc.com 15
Brushbond/Brushbond RFX system Proofex Torchseal system
Proofex Torchseal 4SI/4PI are 4 mm thick quality torch applied APP-based slated/plain membranes manufactured
Brushbond/Brushbond RFX is liquid applied two-component acrylic polymer modified elastomeric waterproofing from premium grade modified bitumen, reinforced with a core of non-woven polyester fabric weighing
membrane. product can simply be applied by a stiff brush, or trowel to obtain the desired thickness. Brushbond/ 160 g/m², rot-proof and is malleable. The core gives the membrane its excellent mechanical properties, allows
Brushbond RFX powder consists of specially selected cements, graded hard-wearing aggregates and polymer for good elongation and affords high resistance to piercing. Proofex Torchseal 4SI/4PI membranes are ideal
additives. for use in a wide range of waterproofing applications such as medium and large roofs. The applied membrane
The polymer provides Brushbond/Brushbond RFX with exceptional adhesion, toughness and durability. Withstands is then immediately protected from UV light and from mechanical damage by sand/cement screed. Provides a
high positive hydrostatic pressures. continuously bonded waterproof membrane for roofing application.
Brushcrete/ Hydroproof XTRA is a single-component Proofex Torchseal 3SI/3PI are 3 mm thick quality
acrylic-based polymer when blended with cement, torch applied APP based slated/plain membranes
forms a composite polymer-modified cementitious manufactured from premium grade modified
waterproofing system, when used in conjunction bitumen, reinforced with a core of non-woven
with fibre mesh, forms a tough hard wearing surface. polyester fabric weighing 160 g/m², rot-proof and
is malleable. The core gives the membrane its
Brushcrete Hydroproof XTRA polymer in conjunction excellent mechanical properties, allows for good
with cement provides a seamless waterproof coating elongation and affords high resistance to piercing.
to concrete and masonry surfaces. It can be used as Proofex Torchseal 3SI/3PI membranes are ideal for
a waterproof coating. use in a wide range of waterproofing applications
such as medium & large roofs. The applied
membrane is then immediately protected from UV
light and from mechanical damage by sand/cement
screed. Provide a continuously bonded waterproof
membrane for roofing application.
16 www.fosroc.com www.fosroc.com 17
Brushbond Ti Flexicoat Nitoproof 600 PF system
Elastomeric acrylic polymer-based solar reflective and insulating coating. Nitoproof 600PF is a single component pitch free liquid polyurethane. It cures by reaction with atmospheric
moisture to form a tough, elastomeric, waterproof membrane. Nitoproof 600PF is designed for use on
Brushbond Ti Flexicoat is a water-based white horizontal and vertical surfaces, covered by a protective screed or render.
coloured emulsion comprising of acrylic polymers
and specially designed hollow “microspheres”, Nitoproof 600PF can be applied by brush, squeegee or roller. It is applied at a minimum wet film thickness of
less than 100 microns in diameter with non- 1.5mm in 2 coats.
conductive properties. These microspheres
collectively acts as thermal insulation blanket
covering the structure effectively reflecting
solar radiation back into the atmosphere. This
results in impressive temperature reduction
behind the substrate by a min. of 10 oC.
This system also has certain waterproofing
properties and is able to bridge hairline cracks
caused by thermal movements.
Nitoproof 600 Standard is single component pitch modified polyurethane cures by reaction with atmospheric
moisture to give a tough elastomeric waterproof membrane of 1.3 mm thick. It is supplied in a single grade
to meet all site application methods and requirements.
Brushbond Roofguard is a single component
Nitoproof 600 Standard is a medium viscosity grade (approximately 600 poise) for roller, squeegee or spray acrylic polymer modified, fibre reinforced high
application to horizontal and vertical surfaces. build easy roller / brushable coating available in
different colours for application in multiple layers,
minimum 3-layer application is recommended
for best performance. Thickness of each coat
shall be approximately 330 microns.
Proofex Self Adhesive PR15/20 is a 1.5 and 2 mm thick cold-applied Self Adhesive sheet membrane comprising of a Proofex ORG/OGP are TPO/FPA (Thermoplastic Polyolefin Flexible Polypropylene Alloy) reinforced membrane
polymer-modified bitumen layer internally reinforced with polyester, bonded on to an outer surface of cross laminated produced by extrusion of granules resulting from the incorporation of ethylene propylene rubber into a
polyethylene film. The polymer bitumen adhesive layer is protected on the underside by a silicone release paper polypropylene matrix together with other additives as appropriate to the type of membrane.
which is removed just prior to the application of Proofex Self Adhesive PR15/20 to the tack coat primed substrate. The membrane is manufactured in two different colours, it is coloured grey on top and black on the underside.
The applied membrane is then immediately protected from UV light and from mechanical damage by sand/cement This helps to identify any damages that may occur during application. A white coloured grade is available which
screed. Provide a continuously bonded waterproof membrane for roofing application. has a Solar Reflective index of 99, suitable for cool roof applications. Proofex ORG/OGP are available in 1.2, 1.5
and 1.8 mm thickness.
Proofex PGP flexible PVC synthetic membrane for the waterproofing of roof. The membrane is manufactured in two
different colours, it is coloured light grey on top and black on the underside. This helps to identify any damages that
may occur during application. Proofex PGP is available at 1.5 and 2 mm thick.
Advantages
Rapid installation – available in large rolls
20 www.fosroc.com www.fosroc.com 21
economic benefits
Social, environmental &
Wet areas Providing storm water retention
Green roofing may also have benefits in storm water management. Rain water is captured
and held within the growing media for release back into the atmosphere through
Bathrooms, toilets and wet areas in kitchen that are in evaporation. This decreases the amount of water run-off into local water systems; by
continuous contact with water are vulnerable to potential delaying and reducing peak storm water run-off rates and volumes, lower loading is placed
leakages and subsequent damages to its structure and on drainage systems.
interior finishes.
Environment-friendly air purification
These critical applications can be dealt with by using a As well as absorbing carbon dioxide during photosynthesis and releasing oxygen into the
wide variety of waterproofing products supplied by Fosroc, built environment, plants can also reduce particulate and other pollution by filtering these
ensuring peace of mind for long-term durability and comfort. from the air. Materials trapped at the greenery surface area is washed by rain or watering
into the growing medium below.
Brushbond is a two-component acrylic polymer-modified
elastomeric waterproofing membrane. Brushbond can simply A green podium is a designated green area created by adding layers of growing medium
be applied by a stiff brush, or trowel to obtain the desired and plants on top of a functional roofing system and typically consists of:
thickness.
Plants selected to suit client specifications
Brushbond has exceptional adhesion, toughness and A growing medium, which may or may not include soil
durability. It withstands high positive hydrostatic pressures.
A filter geotextile to contain the roots and the growing medium while allowing for
Can be applied to damp concrete water penetration
Excellent crack-bridging performance A specialised drainage layer, sometimes with built-in water reservoirs to retain water
Easy application by brush, roller or trowel
The waterproofing/roofing membranes, with an integral root resistance
Minimum surface preparation needed – low labour costs
Breathable – allows transmission of water vapour from The roof structure with traditional insulation either above or below
interior of building
22 www.fosroc.com www.fosroc.com 23
Fosroc Polyurea WPE Seamless waterproofing system Typical details: Landscape Waterproofing
(Spray applied Polyurea) Fast cure spray application
Excellent durability
CEN TS14416 root resistant
Fosroc Polyurea WH 200/GR is a spray-applied, 100% solids, flexible, two-component, rapid curing hybrid
Polyurea system, designed as a waterproofing and protective coating.
It combines the advantages of seamless coating with long life cycles and high durability.
Type of Protection to Chemical Bond with the
Fosroc Polyurea WH 200/GR is environment friendly - zero VOC with good thermal stability. It gives fast Products Life expectancy
Landscape membrane resistance Substrate
turnaround time with excellent impact, abrasion and puncture resistance.
Fosroc Polyurea
Intensive/Extensive Good resistance to Fully bonded system-Prevent
Ideally suggested for: WPE (Green certified Not required Life expectancy > 15 years
Landscape chemicals lateral migration of water
product)
Podium decks
Fosroc Polyurea Good resistance to Fully bonded system-Prevent
Roof gardens WH 200/GR
Extensive Landscape Not required
chemicals
Life expectancy > 15 years
lateral migration of water
Green roofs
Stadium stands Intensive/Extensive Good resistance to
Proofex PGP Not required Life expectancy > 15 years Loose laid system
Service roofs Landscape chemicals
Cut and cover tunnels
Proofex OFB (Green Intensive/Extensive Good resistance to Fully bonded system-Prevent
Not required Life expectancy > 15 years
certified product)
Recommended application areas of application Landscape chemicals lateral migration of water
Application Area Polyurea WH200/GR Polyurea WPE Application Area Polyurea WH200/GR Polyurea WPE Nitoproof 600 Mild resistance to Fully bonded system-Prevent
Intensive Landscape Required Life expectancy > 10 years
Podium slabs* Jetties, Piers, wharfs Standard/PF chemicals lateral migration of water
Supercast PVC
PVC waterstops Surface Resin repair
for expansion Nitomortar range
repairs mortars
Waterstops
Products approved
Hydrophilic Self Adhesive
for use in direct contact Supercast SW
waterstop Proofex
waterproof
with drinking water Self Adhesive
External membrane
waterproof
Joint sealants Nitoseal MS600 One part MS
sealant membranes Flexible
Nitocote CM210 cementitious
product selector
coating
Dirty water
Solvent free
Internal
Nitocote EP405 epoxy resin PVC waterstops
coating
Products approved coating Supercast PVC for expansion
for use in direct contact joints
with drinking water Surface Cementitious Waterstops
Renderoc FC
repairs render
Hydrophilic
Supercast SW
waterstop
Externally Pre-applied
placed Proofex Engage waterproof
waterproofing
membranes membranes High density
Product not requiring Drainage Proofex Sheetdrain drainage
Externally Self Adhesive membranes
certification placed membrane
waterproofing Proofex Self Adhesive waterproof
(Application for external
membranes membranes
areas)
Externally High density One part
placed drainage Proofex Sheetdrain drainage Joint Nitoseal MS600 flexible
membranes membranes sealants sealant
Expansion Non-absorbent
joint filler Hydrocell XL polyethylene
boards joint filler
26 www.fosroc.com www.fosroc.com 27
FOSROC OPERATIONS
Chandigarh
Noida
Lucknow
Jaipur Keshwana
Patna Guwahati
Ahmedabad Bangladesh
Kolkata
Ankleshwar
Nagpur
Bhubaneswar
Navi Mumbai
Pune
Vizag
Hyderabad
Bangalore
Chennai
Cochin
Head Office
Plant
Regional Offices
Branch Offices
Regional Offices
WEST : Thane (West) – 400 615, Maharashtra Phone : (022) 6229 6800
NORTH : Noida – 201 309, Uttar Pradesh Phone : (0120) 4270620/1/3
EAST : Kolkata – 700 068, West Bengal Phone : (033) 6534 3188
SOUTH : Chennai – 600 028, Tamil Nadu Phone : (044) 2489 9994
Branch Offices
Ahmedabad – (079) 4005 2800, 4005 2801 Nagpur – +91 9561001353
Bhubaneswar – +91 97770 49670 / +91 99370 28267 Jaipur - +91 9784007155
Chandigarh – (0172) 263 6855 Patna – +91 9771495335
FWPS/INDIA/12/12/2019
Important Note
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
request. Whilst Fosroc endeavours to ensure that any advice, recommendation, specification
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
directly or indirectly arising from the use of its products, whether or not in accordance with
any advice, specification, recommendation or information given by it. constructive solutions
E-mail: enquiry.india@fosroc.com CIN: U02411KA1980PTC004053 www.fosroc.com