Professional Documents
Culture Documents
Dear Customer,
Like all Tarrington House products, this product was developed based on the latest technical
knowledge and produced using highly reliable and modern electrical and electronic materials.
We recommend that you take a few minutes to read through these operating instructions before use.
TABLE OF CONTENTS
SAFETY INSTRUCTIONS ...............................................................................................................1-2
INTENDED USE .................................................................................................................................3
PARTS FOR OPERATION .................................................................................................................3
EFFICIENT USE .................................................................................................................................4
PUT TOGETHER ................................................................................................................................4
USE .................................................................................................................................................5-6
STORING ICE CREAM.......................................................................................................................6
RECIPE SUGGESTIONS ................................................................................................................7-9
CLEANING AND MAINTENANCE ....................................................................................................10
TECHNICAL DATA ...........................................................................................................................10
WARRANTY......................................................................................................................................11
SAFETY INSTRUCTIONS
• Before using the device for the first time, read these operating instructions carefully! Follow all
safety instructions to avoid damage due to improper use!
• Keep these instructions for future reference. If this device is transferred to a third party, these
operating instructions must be given with it.
• Use the device only for its intended purpose.
• Use the device indoors only. Do not use the device outdoors or in the bathroom.
• In case of ineffective use or improper maintenance, no liability is accepted for any
damages that may occur.
• Persons (this includes children) with physical, sensory or mental disabilities, or who lack
experience and/or knowledge, should not use the device unless they are supervised by
someone responsible for their safety, or unless that person has instructed them in the use of the
device.
• Supervise children to prevent them from playing with the device.
• Do not place the appliance on cooking surfaces (gas, electric, coal stove, etc.). Keep the
device well away from hot surfaces.
1
IJSMACHINE
User manual
ICM1400
SAFETY INSTRUCTIONS
• Always use the unit on a flat, firm, clean, and dry surface.
• Do not open the device under any circumstances. We accept no liability for damage
caused by improper use.
• This appliance complies with valid safety standards. If the device or the cord of this device is
damaged, it must be replaced by the manufacturer or its central customer service or an
equally qualified expert, in order to avoid risks.
Inadequate repairs or repairs made by unqualified persons, may pose hazards and risks to the
user.
• Never use the device with wet or damp hands.
• Use only original, i.e. manufacturer-recommended, parts.
• Danger of suffocation! Always keep packaging material out of reach of children and
toddlers.
• Ensure that packaging material is disposed of in the prescribed manner. Check with your
municipality about collection points or household waste segregation.
• Check that the voltage data on the rating plate corresponds to the characteristics of your
electricity supply. The power supply to the appliance can only be interrupted by unplugging the
power cord.
• As additional protection, we recommend installing a fault current protection device in the circuit,
which is activated by a measured fault current of no more than 30mA. Please seek the advice of
the electrical installer.
• Dry the device and all parts thoroughly before connecting it to the mains and fitting accessories.
• Position the device so that the mains plug is always accessible.
• Never touch the power plug with wet or damp hands.
• Unplug the appliance when not in use or unattended before assembling, disassembling or
cleaning it.
• If the cord of this appliance is damaged, it must be replaced by the manufacturer or its
customer service or an equivalent expert, to avoid risks. If an extension cord is used, it must
comply with the appropriate values for power.
• Apply the electrical cord and any extension cord so that no one can accidentally pull on it or trip
over it.
• You must avoid damaging the cord by clamping, kinking or scraping along sharp edges.
Keep the cord out of reach of hot surfaces.
• Do not unplug the cord by the plug or wrap the cord around the appliance.
• Do not immerse the unit, cord or plug in water or other liquids.
• Clean the base unit only with a slightly damp cloth.
• During operation, keep head hair, garments and other objects out of reach of the unit to
avoid injury and damage.
• Do not touch any moving parts of the appliance. Assemble or remove parts only after
unplugging the unit and bringing it to a complete stop.
• This unit is not intended to be turned on via a separate timer or remote control system.
• This device is for indoor use only.
2
IJSMACHINE
User manual
ICM1400
INTENDED USE
This appliance is intended only as an ice cream maker for ice cream. This device is
intended for private use only and not for commercial purposes.
2
°C
4
10
9
5
8
11
°C
1. On/off switch for the agitator 7. Cord with plug for mains connection
mechanism 8. Release button
2. Motor for the agitator mechanism 9. On/Off switch for the cooling process
3. Transparent lid 10. Cooling process indicator light
4. Rudder Mechanism 11. Fixed attached dish
5. Removable ice bowl *
6. Ambient temperature indicator ( ) /
Electronic timer ( )
* Ambient temperature does not affect how the machine operates, however, may have an effect on
the time for preparation.
3
IJSMACHINE
User manual
ICM1400
EFFECTIVE USE
• Before commissioning, make sure that the unit has been on a flat horizontal surface for 12
hours without being plugged in.
• Ensure that the device, even when being transported, is always horizontal, otherwise you risk
damaging the compressor. If this does not happen, after the device is once again horizontal,
you must wait at least 12 hours before switching it on again.
• Remove all packing material.
• Clean the device as described under Cleaning and maintenance.
PUT TOGETHER
• Put the transparent cover (3) on the mixer motor (2) and lock both securely.
• Insert the mixer bar (4) into the mixer motor (2). Make sure it falls firmly into the ledges,
otherwise the mixer will not function properly.
• Place the removable ice bowl (5) into the permanently attached dish (11). Make sure the
handle of the removable bowl is in the locking tab to prevent the removable bowl from moving
while mixing.
• Put the mixer motor (2) on and turn it so that it drops into the insertion socket.
• WARNING: Never use the removable bowl (5) for the microwave, oven or any other appliance
that heats. Do not fill the cold bowl (5) with hot liquid or keep it cold under very hot water.
• To prevent cold loss, do not switch on the device without a transparent lid (3).
4
IJSMACHINE
User manual
ICM1400
USE
Use timer
• The electronic timer (6) allows you to program the ice cream preparation time.
• IMPORTANT: When the timer (6) is turned off, mixing also stops, but the cooling process does
not. When the ice is ready, the cooling process must be turned off manually. Press the On/Off
switch for the cooling process (9) (the indicator light (10) goes off).
• Set the timer (6) by pressing the button as many times as necessary until the desired
duration (5/10/20/35/40 minutes is indicated.
• Turn on the mixer motor (2) using the mixer bar On/Off switch (1).
• Set the timer (6) by pressing the button.
• As soon as the time display stops flashing; ice cream preparation begins.
• To change the time setting, press the button and reset the time as described above.
• The end of the ice cream preparation time notified in advance with an audible signal.
• WARNING: The signal indicates that the programmed time duration has expired, but not that
the ice cream is also ready. If the ice cream is still not solid enough after the set time has
expired, extend the preparation time as described above.
Enable
• Before turning on the appliance, prepare the ice cream mixture (see Recipe Suggestions). If
the mass prepared in advance is hot, it must first be cooled in the refrigerator to refrigerator
temperature (to about 10°C).
• Place the unit on a level surface and check that the vents are not blocked.
• Once the appliance is assembled, the plug (7) can be plugged in.
• Press the cooling process On/Off switch (9); the cooling process indicator light will
come on to indicate that the cooling process has started.
• After five (5) minutes, according to the description above, set the timer and turn on the mixer rod
(1) in via the mixing function.
• Pour the already prepared ice cream mixture into the bowl through the opening in the transparent
lid (3).
• IMPORTANT: Never fill the bowl (5) with hot foods.
• IMPORTANT: Never fill the bowl (3) more than half full, because in ice cream preparation, the
• volume increases.
• During the ice cream preparation time, you can add chocolate sprinkles, raisins and any other
possible ingredients through the opening in the lid (3). Add alcohol only a few minutes before the
end of the cycle, otherwise the ice cream preparation time will be considerably longer.
• Depending on the selected recipe, the ice cream preparation time can take 5/10/20/35/40
minutes (approximately 35 minutes for fruit ice cream and 40 minutes for cream ice cream).
During this preparation time, the ice cream becomes creamy. For firmer ice cream, extend the
time by 10-20 minutes.
• Toward the end of the preparation time, you can check how solid the ice is through the
transparent lid (3).
• IMPORTANT: During ice cream preparation, do not interrupt the cooling process if not
necessary, as this may adversely affect successful ice cream preparation.
5
IJSMACHINE
User manual
ICM1400
• When the ice cream has reached the proper consistency, the direction of rotation of the mixer
changes. This means that the ice cream preparation is finished. Changing direction of rotation
is not harmful to the motor, however, we recommend that you turn off the motor.
• If the ice needs to firm up a bit, you can leave the cooling process on for 10 to 20 minutes
longer.
• Turn off the appliance as soon as the ice is ready and unplug the power cord (7)from the outlet.
• WARNING: Remember to turn off the cooling process as soon as the ice is ready, otherwise the
ice will freeze solid to the bowl (5).
• Hold down the mixer motor release button (8) and turn the motor counterclockwise so you can
take it off.
• Take out the mixer bar so you can better loosen the ice cream from the bowl.
• To avoid damaging the bowl (5), loosen the ice with plastic or wooden tools.
Recipes high in sugar, fat or alcohol take longer to become solid (depending on the proportions,
the mixture may not even become solid at all).
If you want to add more sugar during preparation, do not sprinkle the sugar in directly through the
filling opening, as the sugar will no longer dissolve. First dissolve the sugar in a little water or milk.
6
IJSMACHINE
User manual
ICM1400
RECIPE SUGGESTIONS
1 cup of milk
1 cup (250 ml) whole cream
1 vanilla pod*
4 egg yolks
½ cup (110 g) powdered sugar
1. In a saucepan, mix the milk and cream. Cut the vanilla pod lengthwise. Scratch out the
vanilla seed (pith) and add the pod and seed to the mixture in the pan. On low heat,
bring the mixture to a boil
2. Beat the egg yolks with the sugar for 3-4 minutes, until light and creamy.
3. Add the warm milk mixture to the egg mixture, stirring, with small amounts at a time, until
everything is well mixed.
4. Put the mixture in a clean saucepan and heat, stirring constantly with a wooden spoon at a low
heat setting, until the mixture becomes thick and coats the back of the spoon. Do not let the
mixture boil as it will cause it to separate.
5. Put the mixture in a bowl and remove the vanilla pod. Let everything cool before leaving the
mixture in the refrigerator for several hours.
6. Set up the ice cream maker as described above. Turn on the machine and pour the
mixture dor the filling opening into the bowl.
7. The mixture is ready as soon as the mixer bar changes direction of rotation. This takes
about 40 minutes.
* You can also replace the vanilla pod with two teaspoons of vanilla extract.
1. Follow steps 1-7 for plain vanilla ice cream, omitting the vanilla bean. Add the
strawberry mixture in step 6.
2. To prepare the strawberry mixture, first puree the strawberries in a blender. Rub the mixture
through a fine sieve and remove the strawberry mixture.
3. Place the strawberry puree and some more sugar in a saucepan and stir on a low heat
setting until the sugar dissolves. Turn the burner to a higher setting and cook the mixture,
stirring occasionally, for about 8 minutes or until reduced to 1 cup. Put everything in a
heatproof bowl or jug and let it set in the refrigerator for several hours.
4. Once the egg cream has cooled, stir in the strawberry mixture well and refrigerate.
7
IJSMACHINE
User manual
ICM1400
RECIPE SUGGESTIONS
Quick mix for vanilla ice cream
For about 1 liter
1. In a bowl, mix milk, condensed milk, cream and vanilla extract well.
2. Place the mixture in the freezer compartment until completely frozen.
3. Set up the ice cream maker as described above. Turn on the machine and put the
mixture dor the filling opening in the bowl.
4. The mixture is ready as soon as the mixer bar changes direction of rotation. This takes
about 40 minutes.
1.25 liters
1. Follow steps 1-4 of preparing the quick vanilla ice cream mixture on page 9.
2. Meanwhile, in a small, heavy saucepan, mix the sugar with the water and stir constantly, over
low heat, until the sugar dissolves. Turn up the heat, bring to a boil and do not cover, do not
stir, about 10 minutes or until the syrup has turned golden.
3. Pour caramel mixture into a 20 cm x 20 cm rectangular container and let stand for 5
minutes. Drizzle chocolate over the warm caramel and spread the melting chocolate with a
spatula until all the caramel is covered. Sprinkle almonds on top and put everything in the
freezer or until completely hardened. Break the chocolate-nut praline into pieces and chop
coarsely in a blender.
4. When the ice cream is ready, stir in another 1 cup of the praline mixture and stir just until
everything is well blended. Put the mixture spoon by spoon into a plastic container, put a lid on
top and put it in the freezer until everything has hardened.
5. Sprinkle the rest of the chocolate-nut-praline over the ice cream when serving.
8
IJSMACHINE
User manual
ICM1400
RECIPE SUGGESTIONS
Sorbet
A delicious dairy- and fat-free dessert, perfect as the conclusion of a meal or as a snack on a
hot day! Sorbet are made from sugar syrup.
Sugar syrup
For 1 ½ cups
1. Put the thawed berries along with their juice in a blender and puree the mixture. Rub the
berries through a fine sieve to remove the seeds. Freeze.
2. Stir in the sugar syrup, berries and lime juice.
3. Set up the ice cream maker as described above. Turn on the machine and put the
mixture dor the filling opening in the bowl.
4. The mixture is ready as soon as the mixer bar changes direction of rotation. This takes
about 35 minutes.
Sorbet of watermelon
For approximately 950ml
TECHNICAL DATA
Nutrition: 220-240V~, 50Hz
Power: 150 W
Detachable bowl contents: 1,4 l
Dimensions(w x t x h): 38.5 x 28 x 28 cm
Weight: 9.66 kg
Refrigerant: R134a
Refrigerant weight: 0.07 kg
Noise level: 69.4 dB(A)
10
IJSMACHINE
User manual
ICM1400
WARRANTY
Warranty claims shall become null and void in the event of intervention by the purchaser or third
parties. Damage caused by improper handling or operation, improper setup or storage, improper
connection or installation as well as force majeure or other external influences are not covered by
the warranty. We recommend reading these operating instructions carefully as they contain
important instructions.
The warranty claim must be demonstrated by the buyer by presenting the proof of purchase.
Directions:
1. If your product stops working properly, please check first that the problem is not caused by
other reasons, such as interrupted power supply or improper handling.
2. Please ensure that you at least enclose or keep the following documents with your
defective device:
– Proof of purchase.
– The name of the device / type / brand.
– The description of the malfunction that occurred with as accurate information about the
error as possible.
Please contact your dealer in person or by phone if you wish to make a warranty claim and in case of
malfunctions.
130418
MCC Trading International GmbH
Schlüterstr. 5
40235 Düsseldorf
11