Professional Documents
Culture Documents
DE
IT
USER
MANUAL
DS-10
DS-10 PLUS
EN
DE
IT
Maurizio Aterini,
founder of Gold Note
| IMPORTANT SAFETY
| INFORMATIONS
PLEASE NOTE the third prong are provided for your safety.
If the provided plug does not fit into
1 Do not disassemble any part of the
your outlet, consult an electrician for
product.
replacement of the obsolete outlet. or
2 Do not use any part of the product for pinched particularly at plugs, convenience
other purposes. receptacles, and the point where they exit
from the apparatus.
3 For service and problems of any kind,
contact qualified Gold Note personnel. | Only use attachments/accessories specified
by the manufacturer.
4 Protect the product from rain, humidity
and keep away from heat sources, electric | Use only with the cart, stand, tripod,
and electronic motors etc. The power bracket, or table specified by the
cord supplied must be used only on this manufacturer, or sold with the apparatus.
unit.
When a cart is used, use caution when
5 Gold Note does not have responsibility moving the cart/apparatus combination to
for any improper use of this unit. avoid injury from tip-over.
| Unplug this apparatus during lightning
storms or when unused for long periods
GENERIC INFORMATION of time. Refer all servicing to qualified
service personnel only. Servicing is required
| Read these instructions and store them. when the apparatus has been damaged in
| Heed all warnings. any way (such as when the power cord or
plug is damaged, liquid has been spilled
| Follow the instructions. or objects have fallen into the apparatus,
| Do not use this apparatus near water. the apparatus has been exposed to rain
or moisture) and in any case when the
| Clean only with a dry cloth. apparatus does not operate normally or
has been dropped.
| Do not block the ventilation openings
and install in accordance with the
manufacturer’s instructions.
| Do not install near heat sources such as
radiators, heat registers, stoves or other
apparatus (including amplifiers) that
produce heat.
| Do not defeat the safety purpose of
the polarised or grounding-type plug: a
polarised plug hastwo blades with one
wider than the other.
| A grounding type plug has two blades and
a third grounding prong. The wide blade or
EN
DE
IT
This appliance has a serial number located on the rear panel.
Please record the model and serial number and retain them for your records.
MODEL
SERIAL NUMBER
CAUTION! WARNING!
To reduce the risk of electric shock, do not To prevent fire or shock hazard, do not
remove cover (or back). No user-serviceable expose this appliance to rain or moisture.
parts inside. Refer only to qualified Gold
Note service personnel for service.
DE
INTRODUCTION AND FEATURES 1
TECHNICAL SPECIFICATIONS 3 IT
FRONT PANEL 5
REAR PANEL 6
SELECT FUNCTIONS 7
NETWORK SETUP 8
FEATURES AND FUNCTIONS 10
CHAMELEON MODE 12
CHAMELEON PARAMETERS 14
CONNECTING OTHER SOURCES 15
CONTROL APP 16
REMOTE CONTROL 20
FIRMWARE UPDATE 21
PRODUCT REGISTRATION 21
TROUBLESHOOTING 22
RELATED PRODUCTS 24
| PACKAGE CONTENT
1x 1x 1x 1x 1x
DS-10/PLUS POWER WI-FI REMOTE USER
CABLE ANTENNA CONTROL MANUAL
| INTRODUCTION AND FEATURES
A MODERN AUDIO SOURCE USB flash drive (DSD64 on USB and LAN,
PCM up to 24/192).
The DS-10 is a versatile state-of-the-
art streaming DAC designed for the
contemporary audiophile and featuring a LINE PREAMP & HEADPHONE
new generation D/A Converter, UPnP-DLNA OUTPUT
Streamer, Line Preamplifier and Headphone
Amplifier. The technology of the DS-10 The DS-10 is equipped with an on/off
is brilliantly enclosed in a compact-sized switchable High-End Analogue Preamp
aluminium chassis and it’s the perfect stage to enable the control of the analogue
addition to a modern High-End audio volume even through web players (when the
system. Inspired by our acclaimed IS-1000 Preamp stage is activated) and guarantee
All-In-One unit, it combines its extended the best performance ever. The DS-10 also
connectivity features with the exceptional features a professional 6.3mm headphones
high-resolution of the Bluetooth 5.0 - for the output with two sensitivity levels (High/Low),
first time ever on a High-End audio product a proprietary technology we developed to
- and the impressive headphones double help get the best out of your headphones.
power GAIN output. The DS-10 PLUS is With the additional analogue input (available
also equipped with a 3.5 mm jack analogue on the PLUS model only) the DS-10 PLUS
input, becoming a complete preamplifier for becomes the perfect integration between
analogue and digital sources (available on the Gold Note PH-10 phono stage and the
DS-10 PLUS only). PA-10 power amplifier.
1
EN
DE
CHAMALEON MODE QUICK INSTALLATION
IT
The DS-10 has a unique feature that sets The DS-10 is a plug&play DAC that is easy
it apart from any other DAC, making it the and quick to set up in your system. Once it’s
most versatile DAC available today - three connected to your network, it only needs
different profiles can be selected to fine-tune a power amplifier or some active speakers
the performance of the DAC, which adapts and you are ready to start listening. All the
to the music it’s playing as a chameleon. For functions available on the DS-10 are fully
the first time ever, the DAC behaviour can controlled through the SKC (Single Knob
be changed to adapt to the music played Control) and the dedicated App.
without modifying the audio signal and thus
maintaining the highest audio quality, acting
on the deemphasis, the low-pass digital GOLD NOTE DESIGN
filters and the amount of power applied to
the circuits. Such profiles can be selected in Thanks to the unique and innovative Gold
real-time during music playback delivering a Note modular design, the DS-10 can
unique listening experience and ease of use drive PSU-10 EVO, the dedicated external
thanks to the clear menu on the TFT display. inductive power supply, to enhance its
It’s time to enjoy the unprecedented listening performance even more. If you are after
pleasure that only the DS-10 can offer you. uncompromising quality, check with your
local dealer the availability of PSU-10 EVO
and arrange a listening session.
EASY TO USE
2
| TECHNICAL SPECIFICATIONS
RESOLUTION
NETWORK
RCA
AES/EBU
INPUT
TOS-Link
USB-A
USB-B
3
EN
DE
NETWORK CONNECTIVITY SUPPORTED MEDIA SERVERS
IT
| LAN/WLAN (WiFi): | All UPnP
802.11b/g via RJ45 10/100Mbps
| DLNA
| Bluetooth:
High Definition 5.0 (44/16) | Roon
| Roon Dimensions:
200mm W | 80mm H | 260mm D
| Airplay
Weight:
| MQA kg. 4 net - kg. 5 boxed
| Qobuz
| Deezer REMOTE CONTROL
| Spotify
Multifunctional remote control
| Tidal
| vTuner GN CONTROL APP
Up to PCM 24/192kHz
| AIFF (.aif, .aiff, .aifc)
| ALAC
| WAV (.wav) packed/unpacked
| FLAC
| MP3
| DSD64: DSF, DFF
| Apple Lossless
| OGG
| Monkey’s
IMPORTANT
UPnP server must support DSD streaming in
order to stream DSD files.
4
| FRONT PANEL
The front panel of the DS-10 has been glance and adjust parameters either using
designed for ease of use and everyday the knob, the remote or our App. On the
reliability. Everything revolves around the front panel you’ll also find the headphone
interface with two key elements - the large output, which features a dedicated volume
display and the SKC (Single Knob Control). control and two levels of output sensitivity.
These provide you with intuitive controls
so that you can check the DS-10 settings at
2 4
5
3
5
| REAR PANEL EN
DE
REAR PANEL OVERVIEW
IT
The DS-10 features a wide selection of high- power supply PSU-10 EVO to enhance the
quality connections to provide maximum performance of your DS-10.
versatility. The digital inputs include USB-A
and USB-B, TOS, COAX, AES/EBU, and
Ethernet. On the DS-10 PLUS, a 3.5mm PLEASE NOTE
mini-jack is also available as an analog input The antenna is packed separately, please
to connect a source such as the PH-10. The ensure to install it correctly.
PSU IN input is dedicated to the external
15
2
1
14 16
13 12
11
3 4 5 6 7 8 9 10
8 TOS 1 15 PSU IN
6
| SELECT FUNCTIONS
With the SKC: press and hold the knob for 3 With the remote: press the Power button
seconds, the LED will change status. once while pointing at the DS-10, don’t hold
down the button for too long.
3 seconds push
1 Press the knob once to activate the 3 The frame will turn red: now you can turn
SELECTION FRAME. the knob to change the function.
2 Turn the knob left or right until the 4 Press the knob again when the desired
desired function is highlighted by in white value is set to confirm and exit the
then press the knob to select it. selection.
Turn left
or right to
highlight the
selection
Single push
7
| NETWORK SETUP EN
DE
LAN CONNECTION
IT
DS-10 supports both LAN and Wi-Fi
connection.
To use the LAN simply plug the cable into
the Ethernet port on the rear panel and you
are ready to go.
WIFI CONNECTION
If the DS-10 is not connected via Ethernet Watch the video tutorial to learn how to
cable, the Wi-Fi mode is automatically connect the DS-10 to your WiFi.
activated. www.goldnote.it/ds-10-wifi-tutorial
The Wi-Fi blue led blinks steadily to indicate
that the DS-10 is ready to be associated to
your network.
8
WIFI CONNECTION
1 Turn ON the Wi-Fi on your mobile device 5 The DS-10 is now connected to the
and find GOLD-NOTE_XXXX. selected Wi-Fi network.
2 Connect to GOLD-NOTE_XXXX using 6 Connect your mobile device to the same
“password” as password. network used by DS-10.
3 Launch GN Control and go to DEVICE
SETUP > Wi-Fi Network Selection.
4 Here are listed the Wi-Fi networks
available, select the one you want the
DS-10 to connect to.
Turn ON the Wi-Fi and connect Launch GN Control and go to Select the Wi-Fi you want the DS-
to GOLD-NOTE_XXXX DEVICE SETUP > Wi-Fi Network 10 to connect to.
Selection.
9
| FEATURES AND FUNCTIONS EN
DE
OVERVIEW OF THE DISPLAY
IT
Thanks to the display and the SKC, all the part of the display. Please refer to the image
functions of the DS-10 can be adjusted on below for details about the options available
the go. The volume is at the center with the for each function.
other functions found in the top and bottom
Enable functions
0 to 100
Headphone
output level
Input selection There are two
Network power output
options available
Bluetooth
to allow you to
Coax perfectly match
AES/EBU Chameleon mode both high-sensitivity
TOS 1 and low-sensitivity
The presets are used to store the parameters of headphones.
TOS 2
the Chameleon mode. Select SETUP to open the
USB DAC Chameleon menu and fine-tune the DS-10. There HIGH: 5W
Line In* are 3 preset slots available that you can customise LOW: 1W
and quickly select. See the page dedicated to the
*DS-10 PLUS only Chameleon mode for more info.
10
USING THE DS-10
11
| CHAMELEON MODE EN
DE
THE CHAMELEON DAC ACCESS THE PRESET MENU
IT
The Chameleon mode is a special feature You can access the PRESET menu either
designed to let you fine-tune the behaviour using the remote control or the rotary knob
of the DAC. Acting on three parameters, you on the front panel.
can test 192 different setups, adapting the
DS-10 to your music and stereo system with | By remote control: use the left and right
the highest degree of customisation. These arrow keys to browse the functions visible
parameters are Equalisation Curve, De- on the display. Select the word SETUP
emphasis Curve and DAC Power - and your and push the ENTER key (central key
choices are stored into the memory of the with GN logo) to confirm and access the
DS-10 using the presets. PRESET menu.
| By rotary knob: turn the knob to browse
the functions, select the word SETUP and
push the knob to confirm and access the
PRESET menu.
OFF Setup
DS-10 is in standard mode, the Chameleon Press the knob or the Enter key on the remote to
mode is OFF. access the Chameleon mode menu.
12
CUSTOMIZE YOUR LISTENING
| By remote control: use the left and right | By rotary knob: turn the knob to browse
arrow keys to browse the menu, push the the menu, push the knob to select a
ENTER key to select a parameter. When parameter. When the selected parameter
the selected parameter turns grey it can be turns grey it can be changed turning the
changed: use the arrow keys to increase knob to increase or decrease its value.
or decrease its value. Press the ENTER Press the knob to confirm the selected
key to confirm the selected value. Repeat value. Repeat this operation for all
this operation for all parameters. Select parameters. Select the word OK and press
the word OK and press ENTER to save the the knob to save the changes. Select the
changes. Select the word CANCEL to undo word CANCEL and press the knob to undo
the changes and return to the main screen. the changes and return to the main screen.
Preset 1-2-3
13
| CHAMELEON PARAMETERS EN
DE
We recommend to start with the PCM EQ The DEE and the DAC PWR have more
parameter to fine tune the DAC, then adjust subtle effects on the sound but can make IT
the DEE and lastly the DAC PWR. quite a difference in some systems.
14
| CONNECTING OTHER SOURCES
CONNECTING SOURCES
The high-quality connectors available on the On the DS-10 PLUS, the 3.5mm LINE IN
rear panel of the DS-10 allow other digital input can be used to connect analogue
devices to be connected, making it the core sources, such as the PH-10 phono stage.
of a modern audio system.
8 7
1 2 3 4 5 6
15
| CONTROL APP EN
DE
DOWNLOAD THE APP
IT
Our app GN Control is the best way to
control your DS-10 and it’s required to
connect it to your Wi-Fi. It is also the easiest
way to stream music from online streaming App Store Google Play Store
services such a Tidal and Qobuz, and from
your local libraries in case you store music on
a NAS or HDD. Watch the video tutorial to learn how to stream
music, manage playlists and control your DS-10
from our App.
Play the
whole track Seek
list once
Repeat
the current
track
Play/Pause
Stop
Skip
Volume control
Music
Play to
Favourites
Select the music
Folders and tracks player
16
PLAY TO & MUSIC
MUSIC
Streaming services
| Deezer
| Qobuz
| Spotify
| TIDAL
| vTuner
Local services
| Network NAS and UPnP/DLNA services
| USB flash drives are listed as “DS-10
Server”
17
EN
DE
CONTROL PANEL
IT
Tap the information icon found at the top
right corner of the Player screen to access
the control panel.
The control panel mirrors what you see on
the display of your DS-10, allowing you
to access all the features and functions,
including the volume, the input selection, the
gapless function and more.
Input selection
Network
Bluetooth
Chameleon mode Coax
AES/EBU
OFF
Preset 1 TOS-1
Preset 2 TOS-2
Preset 3 USB-DAC
Line In*
Gapless ON/OFF
18
DEVICE SETUP
LAN IP
LAN static IP address setup.
Wi-Fi IP
Wi-Fi static IP address setup.
Firmware update
The app notifies when a new firmware
update is available.
The app shows a pop-up window (image 1) firmware version (image 5), press OK to
when new updates are available, press YES complete the update.
to start. The update will be downloaded It’s extremely important to wait until the last
(image 2) and installed (image 3). Depending pop-up window is shown and to press OK to
on the speed of your network, this may take complete the update, otherwise the firmware
several minutes. might be corrupted.
The system will reboot when the update is
Never power off or disconnect the unit and/or
installed (image 4) and a pop-up window will the app from the network while the firmware is
confirm the unit is now running the latest updating.
1 2 3 4 5
19
| REMOTE CONTROL EN
DE
USING THE REMOTE CONTROL
IT
All the functions and features available on press the Enter key to activate the selection
the DS-10 can be adjusted using the SKC frame and the IN+ and IN- buttons to move
and the remote. To use the remote, simply the frame around the display.
Power ON/OFF
Enter
Input selection
Mute
Volume control
DAC
Display
20
| FIRMWARE UPDATE
We are constantly striving to deliver the best Scan the QR-Code and visit the dedicated
user experience and audio quality with our page on our website to find out how to
products, so please keep your Gold Note update your unit.
unit up to date with the latest firmware.
www.goldnote.it/downloads
| PRODUCT REGISTRATION
21
| TROUBLESHOOTING EN
DE
The GN remote control | The GN remote control | Select DAC mode on the
doesn’t control the DS-10. can be used to control remote.
more than one unit. To
control each unit the The button “DAC” is
correct mode must be located in the upper part
selected on the remote. of the remote.
The App can’t find the | The DS-10 is not | Make sure the DS-10 is
DS-10 in the network. connected to the network. connected to the WLAN
or LAN either with the
Ethernet cable or the
Wi-Fi.
22
PROBLEM CAUSE SOLUTION
The DS-10 does not connect | The network setup didn’t | Repeat the network setup
to the Wi-Fi. work or the DS-10 is either in WPS or Wi-Fi
connected to the wrong APP mode, ensuring
Wi-Fi network. that the DS-10 is actually
connecting to the correct
Wi-Fi. Please see pages
8 and 9 of this manual for
more info.
The DS-10 is connected to | Wi-Fi and cabled networks | Reboot your router and
my Wi-Fi but the App and have complex protocols the DS-10 to refresh the
Roon can’t find it. to manage all the devices network and solve network
connected, each router errors that might have
behaves differently and occurred.
that can undermine the
stability of the connection.
With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft
cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit. Do not use alcohol.
23
| RELATED PRODUCTS EN
DE
TURNTABLES LOUDSPEAKERS
IT
| PIANOSA | XT-7
Italian design meets technical innovation A full range, 3 way speaker with anti-
and impeccable finishes. Pianosa is a turbulence rear bass reflex and an
handmade turntable featuring a 23mm unmistakable look inspired by the Tuscan
platter made of damping polyvinyl and landscape.
our proprietary motor powered by micro-
controlled for 33/45rpm. | A6 EVO II
A slim loudspeaker with a modern Italian
look for excellent sound performances.
| VALORE 425 PLUS
Available in 4 luxurious finishes, Valore | A3 EVO II
425 Plus is a handmade turntable and An elegant and compact bass reflex 2 way
features a 23mm platter made of PTE. A loudspeaker with a modern Italian look and
classic design delivering excellent audio a surprising audiophile sound.
performances.
ELECTRONICS
| PH-10
The PH-10 is a fully analogue phono
preamplifier that offers unique features,
including EQ CURVES, LOAD and GAIN
adjustments, and an intuitive UX thanks to
its SKC (Single Knob Control) and display.
| PA-10
Gold Note’s newest power amplifier of the
smaller but not less efficient product range
called Series 10.
| PSU-10 EVO
The PSU-10 EVO is the super inductive
power supply exclusively developed for the
DS-10 and DS-10 PLUS.
www.goldnote.it
24
25
EN
DE
IT
Maurizio Aterini,
Gründer von Gold Note
26
| WICHTIGE
| SICHERHEITSHINWEISE
27
EN
DE
IT
Dieses Gerät hat eine Seriennummer auf der Rückseite.
Bitte notieren Sie sich die Modell- und Seriennummer und bewahren Sie diese für Ihre
Unterlagen auf.
MODELL
SERIENNUMMER
VORSICHT! WARNUNG!
Um die Gefahr eines Stromschlags Um Feuergefahr oder das Risiko elektrischer
zu verringern, entfernen Sie nicht die Schläge zu vermeiden, darf das Gerät nicht
Abdeckung (oder die Rückseite). Keine vom der Nässe oder Feuchtigkeit ausgesetzt
Benutzer zu wartenden Teile im Inneren werden.
befindlich. Für die Wartung wenden Sie sich
ausschließlich an qualifiziertes Gold Note
Servicepersonal.
28
29
| INHALT EN
DE
EINLEITUNG UND SCHLÜSSELMERKMALE 31
TECHNISCHE ANGABEN 33 IT
VORDERSEITE 35
RÜCKSEITE 36
AUSWAHL FUNKTIONEN 37
NETZWERKKONFIGURATION 38
MERKMALE UND FUNKTIONEN 40
CHAMÄLEON MODUS 42
CHAMÄLEON PARAMETER 44
ANSCHLUSS ANDERER QUELLEN 45
CONTROL APP 46
FERNBEDIENUNG 50
FIRMWAREAKTUALISIERUNG 51
PRODUKTREGISTRIERUNG 51
FEHLERBEHEBUNG 52
ZUGEHÖRIGE PRODUKTE 54
| PACKUNGSINHALT
1x 1x 1x 1x
DS-10/PLUS NETZKABEL WI-FI FERNBEDIENUNG
ANTENNE
1x
BEDIENUNGSANLEITUNG
30
| EINLEITUNG UND
| SCHLÜSSELMERKMALE
EINE MODERNE AUDIO QUELLE Tidal, MQA, Qobuz, Spotify und Deezer
und kontrollieren Sie DS-10 über unsere
Der DS-10 ist ein wandelbares 4-in-1 einfach zu handhabende App GN Control
Gerät der letzten Generation, das für den (gratis erhältlich für iOS und Android) für
modernen Audiophilen entwickelt wurde und Smartphones und Tablets. Sie können
mit einem brandneuen D/A Konverter, einem ebenfalls auf Ihre lokal auf einem NAS oder
UPnP-DLNA Streamer, einer Stereo Vorstufe USB-Speicher (DSD64 auf USB und LAN,
und einem Kopfhörerverstärker ausgestattet PCM bis 24/192) gespeicherte, digitale
ist. Die Spitzentechnologie des DS-10 ist Musiksammlung zugreifen.
auf brillante Weise in einem kompakten
Aluminium-Chassis untergebracht und stellt
die perfekte Ergänzung für ein modernes STEREO VORVERSTÄRKER UND
High-End System dar. Inspiriert von unserem KOPFHÖRERVERSTÄRKER
renommierten IS-1000 All-In-One Gerät,
kombiniert er die Netzwerkfunktionen Der DS-10 ist mit einem High-End
mit dem einzigartigen hochauflösenden stereo Vorverstärker (AN/AUS-schaltbar)
Bluetooth 5.0 - zum ersten Mal überhaupt ausgestattet, um sogar bei Verwendung
in einem High-End Audioprodukt - sowie von Internetradios eine analoge
einem beeindruckenden Kopfhörerausgang Lautstärkeregelung zu ermöglichen (wenn
mit zwei Ausgangsverstärkern. Der DS-10 die Vorstufe aktiviert ist) und somit die
PLUS ist auch mit einem 3.5mm Minijack besten Audioleistungen zu garantieren.
Analogeingang ausgestattet und wird somit Darüber hinaus verfügt der DS-10 über eine
zu einem umfassenden Vorverstärker für professionelle 6,3mm Kopfhörerbuchse mit
analoge und digitale Quellen (nur für DS-10 zwei Ausgangsverstärkern (High/Low), eine
PLUS verfügbar). hauseigene Technologie, die entwickelt
wurde, um das Beste aus Ihren Kopfhörern
herauszuholen. Mit dem zusätzlichen
HIGH-END D/A WANDLER MIT Analogeingang (nur für das Modell PLUS
STREAMER erhältlich) wird der DS-10 PLUS zum
perfekten Verbindungsstück zwischen dem
Der DS-10 ist ein Roon Ready-Gerät mit Gold Note PH-10 Phonovorverstärker und
einer einfachen Plug-and-Play-Installation der PA-10 Endstufe.
und für Multi-Room-Systeme nutzbar. Sie
brauchen ihn nur an Ihr Netzwerk (Wi-Fi oder
Ethernet) und dann an den Endverstärker
oder aktive Lautsprecher anzuschließen,
und schon sind Sie bereit die endlosen
Möglichkeiten der Internetmusik zu
erkunden. Streamen Sie über Roon, Airplay,
31
EN
DE
LANGLEBIGES DESIGN “MADE IN EINFACHE BEDIENUNG
ITALY” IT
Auf dem großen 2,8 Zoll Farbdisplay können
Unsere Produkte werden daraufhin Sie schnell alle Funktionen des DS-10
entwickelt, die beste Benutzererfahrung einsehen und kontrollieren, indem Sie die
zu erzielen und der DS-10 hat dafür eine zugehörige App, den Drehknopf oder die
hochmoderne mechanische Konstruktion Gold Note Fernbedienung verwenden.
aus solide gefertigtem Stahl und starkem Die App GN Control ist gratis für Apple
Aluminium. Diese hochwertigen Materialien iOS und Android auf Smartphones und
garantieren eine sehr tiefe Resonanzfrequenz Tablets erhältlich und zeigt immer alle
und die perfekte Abschirmung gegen Metadateien, Albumcover und auf dem
Störstrahlung. Lied abgespeicherte Information sowie das
originale Auflösungsformat an.
32
| TECHNISCHE ANGABEN
AUFLÖSUNG
NETZWERK
RCA
EINGÄNGE
AES/EBU
TOS-Link
USB-A
USB-B
33
EN
DE
NETZWERKFÄHIGKEIT UNTERSTÜTZTE MEDIENSERVER
IT
| LAN/WLAN (WiFi): | Alle UPnP
802.11b/g via RJ45 10/100Mbps Buchse
| DLNA
| Bluetooth:
5.0 (44/16) | Roon
| Roon Abmessungen:
200mm B | 80mm H | 260mm T
| Airplay
Gewicht:
| MQA kg. 4 net - kg. 5 boxed
| Qobuz
| Deezer FERNBEDIENUNG
| Spotify
Multifunktionale Fernbedienung
| Tidal
| vTuner GN CONTROL APP
34
| VORDERSEITE
ÜBERSICHT VORDERSEITE
Die Front des DS-10 wurde entwickelt, DS-10 jederzeit auf einen Blick eingesehen
um die beste Nutzererfahrung und und die Werte über den Drehknopf, die
alltägliche Verlässlichkeit zu bieten. Alles Fernbedienung oder unsere App angepasst
rotiert um die Nutzeroberfläche, die auf werden können. Auf der Vorderseite finden
zwei Hauptelementen basiert – dem Sie auch die Kopfhörerbuchse, die über eine
großen Bildschirm und der Single Knob zugehörige Lautstärkekontrolle und über
Control (Drehknopf). Diese bieten intuitive zwei Ausgangsempfindlichkeitsoptionen
Schnittstellen, sodass die Einstellungen des verfügt.
2 4
5
3
1 Status-LED:
Status-LED
Rot = Standby
2 IR
Blau = EIN
3 Kopfhörerbuchse Grün = Netzzufuhr durch PSU-10 EVO
4 Bildschirm
5 SKC (Single Knob Control)
35
| RÜCKSEITE EN
DE
ÜBERSICHT RÜCKSEITE
IT
Der DS-10 verfügt eine breite Auswahl Eingang ist dem zugehörigen externen
an hochwertigen Anschlüssen, um die Netzteil PSU-10 EVO gewidmet, um die
größtmögliche Vielseitigkeit zu bieten. Die Performance des DS-10 zu erweitern.
Digitaleingänge umfassen USB-A und USB-B,
TOS, KOAX, AES/EBU und Ethernet. Auf
dem DS-10 Plus ist auch ein 3,5mm Minijack HINWEIS
Analogeingang verfügbar, um Quellen Die Antenne ist separat verpackt, bitte
wie den PH-10 zu verbinden. Der PSU IN achten Sie auf eine korrekte Installation.
15
2
1
14 16
13 12
11
3 4 5 6 7 8 9 10
36
| AUSWAHL FUNKTIONEN
Mit der SKC: Den Drehknopf für 3 Sekunden Mit der Fernbedienung: in Richtung des
gedrückt halten, die LED wird den Status DS-10 halten und einmal die Power-Taste
wechseln. drücken, die Taste nicht zu lange gedrückt
halten.
3 sek drücken
1 Den Knopf einmal drücken, um den 3 Der Rahmen wird rot: nun kann der
AUSWAHLRAHMEN zu aktivieren. Knopf gedreht werden, um die Funktion
anzupassen.
2 Den Knopf nach links oder rechts drehen
bis die gewünschte Funktion in weiss 4 Den Knopf erneut drücken, wenn der
hervorgehoben wird und dann den Knopf gewünschte Wert erreicht ist, um die
drücken, um die Funktion auszuwählen. Einstellung zu bestätigen und die
Auswahl zu verlassen.
Einmal drücken
37
| NETZWERKKONFIGURATION EN
DE
LAN VERBINDUNG
IT
DS-10 unterstützt beides: LAN und Wi-Fi Ethernet-Anschluss auf der
Verbindungen. Rückseite des DS-10 und schon kann es
Um einen LAN-Anschluss zu verwenden, losgehen.
stecken Sie das Kabel einfach in den
WIFI VERBINDUNG
Sehen Sie sich das Video-Tutorial an, um
Wenn das DS-10 nicht über ein Ethernet- zu erfahren, wie der DS-10 mit Ihrem Wi-Fi
Kabel verbunden ist, wird der Wi-Fi-Modus verbunden wird.
automatisch aktiviert. www.goldnote.it/ds-10-wifi-tutorial
Die blaue Wi-Fi-LED blinkt konstant, um
anzuzeigen, dass der DS-10 bereit ist, mit
Ihrem Netzwerk verbunden zu werden.
38
WIFI VERBINDUNG
1 Schalten Sie das Wi-Fi auf Ihrem mobilen 5 DS-10 ist nun mit dem ausgewählten Wi-
Gerät ein und durchsuchen Sie die Fi-Netzwerk verbunden.
Netzwerke nach GOLD-NOTE_XXXX.
6 Schließen Sie Ihr mobiles Gerät an das
2 Verbindung zu GOLD-NOTE_XXXX mit gleiche Netzwerk an, das auch vom DS-10
“password” als Passwort herstellen. verwendet wird.
3 Öffnen Sie die App und gehen Sie
zu DEVICE SETUP > Wi-Fi Network
Selection.
4 Hier werden alle verfügbaren Netzwerke
aufgelistet, wählen Sie dasjenige, welches
Sie mit dem DS-10 verwenden möchten.
Aktivieren Sie das Wi-Fi und Öffnen Sie die GN Control App Wählen Sie das Netzwerk aus, mit
verbinden Sie mit GOLD-NOTE_ und wählen GERÄTE-SETUP > dem sich der DS-10 verbinden
XXXX. WiFi-Netzwerk-Auswahl. soll.
39
| MERKMALE UND FUNKTIONEN EN
DE
ÜBERSICHT DES BILDSCHIRMS
IT
Dank des Bildschirms und der SKC können des Bildschirms. Bitte die untenstehende
alle Funktionen des DS-10 in Echtzeit Abbildung konsultieren, um mehr über die
angepasst werden. In der Mitte wird der verfügbaren Optionen jeder Funktion zu
Lautstärkepegel angezeigt und die anderen erfahren.
Funktionen im oberen sowie unteren Bereich
Funktionen aktivieren
PRE:
Lautstärkekontrolle ist EIN
DAC:
Fester Ausgangspegel Bildschirm
(Lautstärkekontrolle wird
Den Bildschirm EIN
Audioformat und umgangen)
/ AUS schalten /
Info in Streaming MUTE
dimmen.
Wenn der
Auswahl Ausgang Bildschirm AUS ist,
einfach Drehknopf
Kopfhörer oder Fernbedienung
Hochpegelausgang bedienen, um ihn
(Line Out) zeitweise wieder
EIN zu schalten
(Zeitvorgabe 3 Sek.).
Lautstärke
Es stehen zwei
Auswahl Eingang Ausgangsverstärker
Network zur Verfügung,
damit Sie sowohl
Bluetooth
Chamäleon Modus Kopfhörer mit
Coax hohem als
AES/EBU Die Voreinstellungen (Preset) dienen der mit niedrigem
TOS 1 Abspeicherung der Parameter des Chamäleon Schalldruckpegel
Modus. Wählen Sie SETUP aus, um das Chamäleon perfekt anpassen
TOS 2
Menü zu öffnen und Feineinstellungen am DS-10 können.
USB DAC vorzunehmen. Es stehen 3 Voreinstellungsplätze
Line In* zur Verfügung, die benutzerdefiniert und schnell HIGH: 5W
ausgewählt werden können. Für weitere Infos bitte LOW: 1W
*nur auf DS-10 PLUS das Kapitel zum Chamäleon Modus einsehen.
40
STEUERUNG DES DS-10
Wählen Sie Line Out, um Audio an die Wenn Sie den Kopfhörerausgang benutzen,
RCA und XLR-Ausgänge zu senden. können Sie die Empfindlichkeit passend
Wählen Sie Headphones aus, um Audio zu den Anforderungen Ihrer Kopfhörer
an den Kopfhörerausgang zu senden. anpassen. Wir empfehlen, High auszuwählen,
Wenn Sie Ihre Kopfhörer einstecken, wird wenn Sie Kopfhörer mit niedriger
der DS-10 automatisch Headphones als Empfindlichkeit nutzen, und Low bei
Ausgang wählen und den Line Ausgang besonderer Sensitivität.
stummschalten.
Um die Lautstärke eines Ausgangs AUDIOFORMAT UND INFORMATIONEN
anzupassen, wählen Sie diesen zunächst
Das Dateiformat und die Audioauflösung
im Menü an und nutzen Sie dann die
werden in Echtzeit angezeigt, inklusive
Fernbedienung oder den Drehknopf, um
zusätzlicher Informationen, wenn Sie MQA-
die Lautstärke zu ändern. Falls Sie beide
Dateien abspielen (das MQA Symbol wird
Ausgänge gleichzeitig bespielen und einen
oben angezeigt).
davon stumm schalten möchten, wählen Sie
diesen zunächst im Menü an und stellen ihn
sodann stumm (MUTE). BILDSCHIRMBELEUCHTUNG
Sie können die Helligkeit des Bildschirms in
PRE UND DAC MODUS 4 Schritten anpassen:
Der DS-10 kann in zwei Modi operieren: | 100%
| 50%
| PRE
| 25%
| DAC
| OFF (Aus)
Bei Nutzung in PRE Modus, ist die Vorstufe
Wenn der Bildschirm ausgeschaltet
aktiv und Sie können die Lautstärke über die
ist, einfach den Drehknopf oder die
Fernbedienung, den Drehknopf oder die
Fernbedienung drücken, um den Bildschirm
App GN Control anpassen. In DAC Modus
erneut für 3 Sekunden zu aktivieren; er
deaktiviert der DS-10 die Lautstärkekontrolle,
schaltet sich danach wieder aus.
41
| CHAMÄLEON MODUS EN
DE
DER CHAMÄLEON WANDLER ZUGANG MENÜ
VOREINSTELLUNGEN IT
Der Chamäleon Modus ist eine besondere
Funktion des DS-10, mit der man Um auf das Menü der Voreinstellungen
Feinstellungen am Klangcharakter des (PRESET) zuzugreifen, kann man entweder
D/A Wandlers vornehmen kann. Mit dem die Fernbedienung oder den Drehknopf auf
Einwirken auf 3 Parameter können 192 der Front verwenden.
verschiedene Einstellungsoptionen getestet
werden, um den DS-10 mit dem höchsten | Mit der Fernbedienung: die
Grad an Personalisierung an Ihre Musik und Pfeiltasten links und rechts nutzen, um
Ihr System anzupassen. Bei den Parametern die unterschiedlichen Funktionen zu
handelt es sich um die Entzerrungskurve, durchsuchen, die auf dem Bildschirm
De-emphasis Kurve und Netzversorgung des angezeigt werden. Das Wort SETUP
DAC – und Sie können Ihre Auswahl über die auswählen und die ENTER-Taste (zentrale
Voreinstellungen (PRESET) im Speicher des Taste mit GN Logo) drücken, um die
DS-10 hinterlegen. Auswahl zu bestätigen und das PRESET-
Menü zu betreten.
| Mit dem Drehknopf: den Drehknopf
drehen, um die Funktionen zu durchsuchen,
das Wort SETUP auswählen und den Knopf
einmal fest drücken, um die Auswahl zu
bestätigen und das PRESET-Menü zu
betreten.
AUS Voreinstellung
DS-10 ist in Standardmodus, der Chamäleon Den Drehknopf oder die Enter-Taste auf der
Modus ist AUS. Fernbedienung drücken, um auf das Menü des
Chamäleon Modus zuzugreifen.
42
MASSGESCHNEIDERTES CANCEL auswählen, um die Anpassungen
HÖRERLEBNIS zu verwerfen und zum Hauptmenü
zurück zu kehren.
| Mit der Fernbedienung: die Pfeiltasten | Mit dem Drehknopf: den Drehknopf
links und rechts verwenden, um das Menü drehen, um das Menü zu durchsuchen, den
zu durchsuchen, die ENTER-Taste Knopf drücken, um einen Parameter
drücken, um einen Parameter auszuwählen. auszuwählen. Wenn der aktivierte
Wenn der aktivierte Parameter grau wird, Parameter grau wird, kann er angepasst
kann er angepasst werden: die werden: die Pfeiltasten verwenden, um die
Pfeiltasten verwenden, um die Werte Werte anzuheben oder zu senken. Den
anzuheben oder zu senken. Die ENTER- Knopf drücken, um den ausgewählten Wert
Taste drücken, um den ausgewählten Wert zu bestätigen. Diesen Vorgang für alle
zu bestätigen. Diesen Vorgang für alle Parameter wiederholen. Das Wort OK
Parameter wiederholen. Das Wort OK auswählen und den Knopf drücken, um die
auswählen und ENTER drücken, um die Anpassungen abzuspeichern. Das Wort
Anpassungen abzuspeichern. Das Wort CANCEL auswählen, um die Anpassungen
zu verwerfen und zum Hauptmenü zurück
zu kehren.
Graue Farbe
Preset 1-2-3
43
| CHAMÄLEON PARAMETER EN
DE
Wir empfehlen die Feineinstellungen mit DEE und DAC PWR haben einen subtileren
dem Parameter PCM EQ zu beginnen, und Einfluss auf den Klang, können aber in IT
dann mit der DEE und der DAC PWR weiter einigen System einen deutlichen Unterschied
zu machen. machen.
44
| ANSCHLUSS ANDERER QUELLEN
QUELLEN VERBINDEN
Dank der Vielzahl an hochwertigen Auf dem DS-10 PLUS kann über den 3,5mm
Verbindungsstecker auf der Rückseite des LINE IN Eingang eine analoge Quelle
DS-10, können andere digitale Geräte angeschlossen werden, zum Beispiel die PH-
angeschlossen werden, die den Wandler zum 10 Phono-Vorstufe.
Herzstück einer modernen Anlage machen.
8 7
1 2 3 4 5 6
45
| CONTROL APP EN
DE
DIE APP HERUNTERLADEN
IT
Unsere Applikation GN Control ist die beste
Lösung, um Ihren DS-10 zu steuern und
muss mit Ihrem Wi-Fi verbunden werden. App Store Google Play Store
Die App ist auch der beste Weg Musik
über online Streamingdienste wie Tidal und
Qobuz zu streamen, sowie auf Ihre lokalen Schauen Sie sich das Video-Tutorial an, um
Sammlungen zuzugreifen, falls Sie Musik auf zu erfahren, wie Sie Musik streamen, Playlists
organisieren und den DS-10 mit der App
einem NAS oder HDD abgespeichert haben.
steuern.
www.goldnote.it/gn-control-tutorial
PLAYER-ANSICHT
Geräte- Bedienfeld
Konfiguration
Auftrag Titelliste
Wiederholung
Shuffle EIN/AUS
der gesamten
Titelliste
Seek
Titelliste einmal
abspielen
Wiederholung
des aktuellen
Titels
Play/Pause
Stop
Skip
Lautstärkeregelung
Musik
Wiedergabeliste Streamingdienste
und lokale Speicher
Titelliste
Play to
Favoriten
Wiedergabegerät
Ordner und Titel auswählen
46
PLAY TO & MUSIK
MUSIK
Streamingdienste
| Deezer
| Qobuz
| Spotify
| TIDAL
| vTuner
Cloudspeicher
| Dropbox
| OneDrive
Lokale Server
| Netzwork NAS und UPnP/DLNA-
kompatibel
| USB Datenträger werden angezeigt als
“DS-10 Server”
47
EN
DE
BEDIENFELD
IT
Das Symbol Information in der rechten
oberen Ecke des Player-Bildschirms
auswählen, um das Bedienfeld zu öffnen.
Das Bedienfeld wiederholt den Bildschirm
des DS-10 und bietet Ihnen somit Zugriff
auf alle Merkmale und Funktionen, inklusive
Lautstärkeregelung, Auswahl des Eingangs,
unterbrechungsfreie Wiedergabe, u.v.m.
Auswahl Eingang
Network
Bluetooth
Koax
Chamäleon Modus
AES/EBU
AUS TOS-1
Preset 1 TOS-2
Preset 2
USB-DAC
Preset 3
Line In*
High
Low
Unterbrechungsfrei
EIN/AUS
48
GERÄTE-KONFIGURATION
Die App zeigt ein Popup-Fenster (Bild 1), (Bild 5). Drücken Sie OK, um das Update
wenn neue Updates verfügbar sind, drücken abzuschließen. Es ist äußerst wichtig,
Sie zum Starten YES. Das Update wird zu warten, bis das letzte Popup-Fenster
heruntergeladen (Bild 2) und installiert (Bild angezeigt wird, und auf OK zu drücken, um
3). Je nach Geschwindigkeit Ihres Netzwerks das Update abzuschließen, da sonst die
kann dies einige Minuten dauern. Firmware beschädigt werden kann.
Das System wird neu gestartet, wenn
Schalten Sie das Gerät und/oder die App
das Update installiert ist (Bild 4) und ein niemals aus oder trennen Sie es vom Netzwerk,
Popup-Fenster bestätigt, dass das Gerät während die Firmware aktualisiert wird.
jetzt die neueste Firmware-Version ausführt
1 2 3 4 5
49
| FERNBEDIENUNG EN
DE
VERWENDUNG DER
FERNBEDIENUNG IT
Alle Merkmale und Funktionen des DS- Enter-Taste drücken, um den Auswahlrahmen
10 können anhand der SKC und der zu aktivieren und dann die IN+ und IN-
Fernbedienung angepasst werden. Um die Tasten, um den Rahmen über den Bildschirm
Fernbedienung zu verwenden, einfach die zu bewegen.
Power AN/AUS
Enter
Auswahl Eingänge
Mute
Lautstärke
DAC
Bildschirm
50
| FIRMWAREAKTUALISIERUNG
Wir sind ständig darum bemüht, mit Scannen Sie den QR-Code und besuchen
unseren Produkten die bestmögliche Sie die entsprechende Seite auf unserer
Benutzererfahrung und Audioqualität zu Webseite, um zu erfahren, wie Sie Ihr Gerät
erzielen. Halten Sie daher bitte Ihr Gold aktualisieren können.
Note Gerät nach Möglichkeit auf dem
neuesten Stand der Firmware.
www.goldnote.it/downloads_de
| PRODUKTREGISTRIERUNG
PRODUKTREGISTRIERUNG GEWÄHRLEISTUNG
Wir empfehlen, das Produkt innerhalb von 15 Alle Gold Note Geräte verfügen über eine
Tagen nach dem Kauf auf unserer Webseite Gewährleistung bezüglich fehlerhafter
zu registrieren: Materialien und Verarbeitung. Für
www.goldnote.it/produktregistrierung Reparaturen und Probleme jeglicher Art
wenden Sie sich bitte an den Verkäufer,
Die Registrierung führt dazu, dass Sie immer da jede Art von Wartung und Inspektion
die Mitteilungen bezüglich Aktualisierungen, vom Gold Note Fachhändler oder Vertrieb
Informationen und Neuigkeiten zu Ihrem ausgeführt werden muss.
Gerät erhalten.
HINWEIS
WARNUNG
Gold Note Produkte sollten nur von
zertifizierten Gold Note Technikern und
Fachhändlern geöffnet, gewartet und
inspiziert werden. Das Öffnen des Gerätes
durch nicht autorisiertes Personal führt zum
Erlöschen der Gewährleistung.
51
| FEHLERBEHEBUNG EN
DE
Die App kann den DS-10 | Der DS-10 ist nicht mit | Stellen Sie sicher, dass
nicht im Netzwerk finden. dem Netzwerk verbunden. der DS-10 mit dem WLAN
oder LAN verbunden
ist, entweder mit dem
Ethernet-Kabel oder dem
Wi-Fi.
52
PROBLEM URSACHE LÖSUNG
Der DS-10 ist mit dem Wi-Fi | Wi-Fi und Kabelverbinden | Führen Sie einen Neustart
verbunden, aber die App haben komplexe Ihres Routers und des DS-
und Roon finden das Gerät Protokolle, um alle 10 aus, um das Netzwerk
nicht. verbundenen Geräte zu aktualisieren und
zu steuern, jeder eventuell aufgetretene
Router verhält sich Netzwerkprobleme zu
anders und kann die lösen.
Stabilität der Verbindung
beeinträchtigen.
53
| VERWANDTE PRODUKTE EN
DE
PLATTENSPIELER LAUTSPRECHER
IT
| PIANOSA | XT-7
Italienisches Design trifft technische Innovativer Fullrange-3-Wege-
Innovation und makellose Lautsprecher mit Bassreflex und AMT
Oberflächenverarbeitung. Pianosa ist ein Bändchenhochtöner.
handgemachter Plattenspieler ausgestattet
mit einem 23mm starken Teller aus | A6 EVO II
gedämpftem Polyvinyl und unserem Ein schlanker Lautsprecher mit einem
hauseigenen Motor, angetrieben von modernen, italienischen Aussehen für
einem Mikrocontroller für die Drehzahl herausragende Klangleistungen.
33/45. | A3 EVO II
Elegant und kompakt, der A3 EVO ist
| VALORE 425 PLUS ein Zwei-Wege Regallautsprecher mit
Erhältlich in 4 luxuriösen Farbausführungen, Reflexabstimmung. Modernes italienisches
Valore 425 ist ein handgemachter Aussehen, spektakuläre Materialien und
Plattenspieler ausgestattet mit einem audiophiler Klang.
23mm Teller aus PTE. Ein klassisches
Design, das exzellente Audioleistungen
liefert.
ELEKTRONIKEN
| PH-10
Der PH-10 ist ein ganz und gar analoger
Phono-Vorverstärker, der einzigartige
Funktionen bietet, inklusive EQ Kurven,
Anpassungen von Eingangsimpedanz und
Verstärkung, und eine intuitive Bedienung
dank SKC (Single Knob Control Drehknopf)
und Bildschirm.
| PA-10
Gold Notes’s neueste Endstufe der
kompakteren aber nicht minder effizienten
Produktfamilie mit dem Namen Serie 10.
| PSU-10 EVO
Das PSU-10 EVO ist das externe induktive
Netzteil speziell entwickelt für DS-10 und
DS-10 PLUS.
54
55
EN
DE
IT
Maurizio Aterini,
fondatore di Gold Note
56
| INFORMAZIONI IMPORTANTI
| SULLA SICUREZZA
57
EN
DE
IT
Questo apparecchio è identificato da un numero di serie esclusivo posto sul retro.
Si prega di registrare qui il numero di serie e conservare questo documento.
MODELLO
NUMERO DI SERIE
ATTENZIONE! ATTENZIONE!
58
59
| INDICE EN
DE
INTRODUZIONE E DESCRIZIONE 61
SPECIFICHE TECNICHE 63 IT
PANNELLO FRONTALE 65
PANNELLO POSTERIORE 66
INSTALLAZIONE RAPIDA 67
CONFIGURAZIONE DI RETE 68
CARATTERISTICHE E FUNZIONI 70
MODALITÀ CAMALEONTE 72
PARAMETRI CAMALEONTE 74
CONNETTERE ALTRE SORGENTI 75
CONTROLLO VIA APP 76
TELECOMANDO 80
AGGIORNAMENTO FIRMWARE 81
REGISTRAZIONE PRODOTTO 81
RISOLUZIONE PROBLEMI 82
PRODOTTI CORRELATI 84
| CONTENUTO DELLA
| CONFEZIONE
1x 1x 1x 1x
DS-10/PLUS CAVO DI ANTENNA MANUALE
ALIMENTAZIONE WIFI UTENTE
1x
TELECOMANDO
60
| INTRODUZIONE E DESCRIZIONE
UNA SORGENTE AUDIO MODERNA con Roon, Airplay, Tidal, MQA, Qobuz,
Spotify e Deezer, e controlla il DS-10 dal
Il DS-10 è un DAC streaming versatile e tuo smartphone o tablet grazie alla nostra
all’avanguardia progettato per soddisfare App (disponibile gratuitamente per iOS e
le esigenze dell’audiofilo contemporaneo Android). Con DS-10 puoi anche riprodurre
e dotato di un convertitore D/A di nuova la tua collezione musicale archiviata
generazione, streamer UPnP-DLNA, localmente su un NAS o un’unità flash USB
preamplificatore di linea e amplificatore (DSD64 con USB e LAN, PCM fino a 24/192).
cuffie. La tecnologia del DS-10 è stata
brillantemente racchiusa in uno chassis in
alluminio di dimensioni compatte, rendendo PREAMPLIFICATORE DI LINEA
questa unità l’elemento perfetto da E USCITA CUFFIE
aggiungere ad ogni moderno sistema audio
High-End. Ispirato dalla nostra acclamata Il DS-10 dispone di uno stadio di
unità IS-1000 All-In-One, combina le sue preamplificazione analogico High-End, che
numerose connettività all’alta risoluzione del può essere attivato o spento e permette
Bluetooth 5.0 - presente per la prima volta in di regolare il volume anche con le sorgenti
assoluto su un prodotto audio di fascia alta - di rete (quando lo stadio di Preamp è
e all’eccezionale uscita cuffia GAIN a doppia attivo) garantendo sempre le migliori
alimentazione. Il DS-10 PLUS è inoltre dotato performance. Il DS-10 è dotato anche di
di un ingresso analogico* che gli consente un’uscita cuffie professionale di 6.3mm
di diventare un vero preamplificatore con due livelli di sensibilità (High/Low),
per sorgenti sia analogiche che digitali. una tecnologia proprietaria sviluppata per
L’ingresso di linea analogica e lo stadio permettere all’utente di raggiungere la
di preamplificazione funzionano in modo miglior esperienze di ascolto con le cuffie.
completamente analogico per preservare la Con l’aggiunta di un ingresso analogico
qualità audio più pura (*disponibile solo su (disponibile solo sul modello PLUS), il DS-
DS-10 PLUS). 10 PLUS diventa la miglior integrazione
per il pre phono Gold Note PH-10 e
l’amplificatore finale PA-10.
STREAMING DAC HIGH-END
61
EN
DE
a macchina. I materiali scelti sono di alta iOS (iPhone e iPad) che per smartphone
qualità e garantiscono una risonanza della e tablet Android - mostra tutti i dati, le IT
bassa frequenza, controllo delle vibrazioni e copertine e le informazioni registrate sulle
un basso campo magnetico inerziale. tracce come il formato e la risoluzione.
Il DS-10 presenta una funzione unica che lo Il DS-10 è un DAC plug&play facile e
discosta da ogni altro DAC, rendendolo il veloce da installare nel tuo impianto. Una
DAC più versatile disponibile sul mercato: è volta che è stato connesso alla rete, ha
possibile modificare 3 parametri per mettere bisogno solamente di un amplificatore finale
a punto le performance del DAC, che si o di diffusori attivi e puoi subito iniziare
adatta alla musica in riproduzione come un l’ascolto. Tutte le funzioni disponibili sono
camaleonte. Per la prima volta in assoluto disponibili a display e facilmente regolabili
è possibile modificare il comportamento dalla manopola posta sul frontale dell’unità,
del DAC per adattarlo alla musica in dal telecomando in dotazione o dalla App
riproduzione, senza modificare il segnale dedicata (GN Control).
audio e mantenendo la più alta qualità,
agento sulla deenfasi, sui filtri digitali
passa basso e sulla quantità di energia che IL DESIGN DI GOLD NOTE
alimenta i circuiti. Questi parametri possono
essere regolati in tempo reale e durante Grazie al suo design modulare innovativo,
la riproduzione, fornento un’esperienza di il DS-10 può essere affiancato dalla super
ascolto unica e facile grazie al menù visibile alimentazione induttiva esterna dedicata
sul display TFT. PSU-10 EVO, migliorandone ulteriormente
È il momento di godersi un ascolto senza le eccellenti performance. Agli amanti
precedenti che solo DS-10 può offrire. della purezza del suono alla ricerca di
prestazioni senza compromessi consigliamo
di controllare la disponibilità di PSU-10
FACILE DA USARE presso il rivenditore Gold Note di fiducia per
organizzare una sessione d’ascolto.
Con un display TFT ds 2.8” puoi controllare
velocemente le funzioni di DS-10 e regolarle
usando l’App dedicata GN Control, la
manopola posta sul pannello frontale o il
telecomando fornito in dotazione. L’App
dedicata - disponibile gratuitamente sia per
62
| SPECIFICHE TECNICHE
RISOLUZIONE
NETWORK
RCA
INGRESSO
AES/EBU
TOS-Link
USB-A
USB-B
63
EN
DE
CONNETTIVITÀ MEDIA SERVER SUPPORTATI
IT
| LAN/WLAN (WiFi): | All UPnP
802.11b/g via RJ45 10/100Mbps socket
| DLNA
| Bluetooth:
Alta definizione 5.0 (44/16) | Roon
| Roon Dimensioni:
200L | 80A | 260P mm
| Airplay 290L | 180A | 390P mm - imballato
| MQA Peso:
kg. 4
| Qobuz
kg. 5 imballato
| Deezer
| Spotify
TELECOMANDO
| Tidal
Telecomando multi funzione
| vTuner
GN CONTROL APP
FORMATI AUDIO SUPPORTATI
(NETWORK)
PCM 24/192kHz
| AIFF (.aif, .aiff, .aifc)
| ALAC
| WAV (.wav) packed/unpacked
| FLAC
| MP3
| DSD64: DSF, DFF
| Apple Lossless
| OGG
| Monkey’s
IMPORTANTE
Il server UPnP deve supportare lo streaming
DSD per riprodurre i file DSD.
64
| PANNELLO FRONTALE
PANORAMICA PANNELLO
FRONTALE
DS-10 è un innovativo Convertitore D/A, uno una sorgente plug-and-play che può essere
Streamer con amplificatore per cuffie High- completamente controllata anche senza il
End e Bluetooth 5.0. telecomando. Tutte le informazioni e le
Tutto è stato progettato per offrire funzionalità sono visibili e accessibili dal
un’esperienza ottimale: grazie all’esclusivo display in qualsiasi momento per garantire
SKC (Single Knob Control) l’unità diventa un controllo completo sul sistema.
2 4
5
3
1 LED di stato:
LED di stato
Rosso = standby
2 IR
Blu = ON
3 Uscita cuffie Verde = alimentato dalla alimentazione
esterna PSU-10 EVO
4 Display
5 SKC (Single Knob Control)
65
| PANNELLO POSTERIORE EN
DE
PANORAMICA PANNELLO
POSTERIORE IT
15
2
1
14 16
13 12
11
3 4 5 6 7 8 9 10
66
| INSTALLAZIONE RAPIDA
ACCENSIONE E SPEGNIMENTO DI
DS-10
1 Premere la manopola una volta per 3 La cornice bianca diventerà rossa: ruotare
attivare il SELECTION FRAME. la manopola per cambiare funzione.
2 Ruotare la manopola a sinistra o destra 4 Quando la funzione desiderata è stata
finché la funzione desiderata non viene impostata si può premere nuovamente la
evidenziata con un rettangolo bianco. A manopola per confermare ed uscire dalla
questo punto si può premere la manopola selezione.
per selezionare la funzione scelta.
Ruotare a
destra o
sinistra per
evidenziare la
selezione
67
| CONFIGURAZIONE RETE EN
DE
CONNESSIONE LAN
IT
DS-10 supporta sia la connessione LAN che
quella Wi-Fi.
Per utilizzare la connessione LAN inserire il
cavo nella porta Ethernet posta sul pannello
posteriore.
CONNESSIONE WIFI
La modalità Wi-Fi si attiva automaticamente Guarda il video tutorial per capire come
quando il cavo Ethernet non è inserito. connettere DS-10 alla tua WiFi.
68
CONNESSIONE WIFI
1 Attivare il Wi-Fi sul tuo dispositivo mobile 5 Il DS-10 ora è connesso alla rete Wi-Fi
e cercare la rete GOLD-NOTE_XXXX. selezionata.
2 Connettersi a GOLD-NOTE_XXXX 6 Connettere il tuo dispositivo mobile alla
utilizzando “password” come password. stessa rete a cui si è collegato il DS-10.
3 Aprire l’App e andare in DEVICE SETUP >
Wi-Fi Network Selection.
4 Selezionare la connessione wireless alla
quale connettere il DS-10.
Attivare il Wi-Fi sul tuo dispositivo Aprire l’App e andare in Selezionare la connessione
mobile e cercare GOLD-NOTE_ DEVICE SETUP > Wi-Fi Network wireless che si vuole utilizzare con
XXXX Selection. DS-10.
69
| CARATTERISTICHE E FUNZIONI EN
DE
PANORAMICA DEL DISPLAY
IT
Grazie alla manopola e al display , tutte le funzioni sopra e sotto. Nell’immagine
funzioni di DS-10 possono essere regolate sottostante sono dettagliatamente esposte
durante l’utilizzo. Il livello del volume viene le opzioni disponibili per ogni funzione.
mostrato al centro del display con le altre
Abilita funzioni
Da 0 a 100
Livello di uscita
cuffie
Selezione ingressi Ci sono due opzioni
Network di potenza in
uscita disponibili
Bluetooth
che cosentono di
Coax trovare il miglior
AES/EBU Modalità Camaleonte abbinamento con
TOS 1 cuffie sia ad alta che
I preset servono a memorizzare i parametri scelti bassa sensitività.
TOS 2
per la modalità Camaleonte. Seleziona SETUP per
USB DAC aprire il menù Camaleonte e metti a punto il DS-10. HIGH: 5W
Line In* Sono disponibili 3 preset modificabili e facilmente LOW: 1W
selezionabili. Guarda la pagina dedicata alla
*solo su DS-10 PLUS modalità Camaleonte per maggiori informazioni.
70
COME USARE IL DS-10
71
| MODALITÀ CAMALEONTE EN
DE
IL DAC CAMALEONTICO ACCESSO AL MENÙ PRESET
IT
La modalità Camaleonte è una caratteristica Per accedere al menu dei PRESET è possibile
unicamente progettata per mettere a utilizzare sia il telecomando che la manopola
punto il comportamente del DAC. Agendo posta sul pannello frontale.
direttamente su 3 parametri è possibile
sperimentare 192 differenti regolazioni, | Tramite telecomando: utilizzare le
adattando il DS-10 alla musica e all’impianto frecce destra e sinistra per spostarsi
con i più ampi spettri di personalizzazione. tra le varie funzioni visibili sul display.
Questi parametri sono l’equalizzazione delle Selezionare la scritta SETUP e premere il
curve (Equalization Curve), la de-enfasi delle tasto ENTER (tasto centrale con logo GN)
curve (De-emphasis Curve) e la potenza per confermare e accedere al menu dei
del DAC (DAC Power) e ogni regolazione PRESET.
può essere salvata nella memoria di DS-10 | Tramite manopola: ruotare la manopola
tramite i PRESET. per spostarsi tra le funzioni, selezionare
la scritta SETUP e premere la manopola
per confermare e accedere al menu dei
PRESET.
OFF Setup
Il DS-10 lavora in modalità standard. La modalità Premi la manopola o il tasto Enter sul
Camaleonte è spenta. telecomando per accedere al menù della
modalità Camaleonte.
72
PERSONALIZZA IL TUO ASCOLTO
Il parametro selezionato è pronto per essere Le modifiche fatte sono state confermate. E’
modificato. possibile selezionare un altro parametro da
modificare o salvare le modifiche apportate al
PRESET.
Preset 1-2-3
73
| PARAMETRI CAMALEONTE EN
DE
Si consiglia di iniziare dal parametro PCM EQ Il DEE e il DAC PWR influiscono più
per mettere a punto il DAC, per poi regolare lievemente sul suono ma possono fare la IT
il DEE e infine il DAC PWR. differenza in alcuni sistemi.
74
| CONNETTERE ALTRE SORGENTI
CONNETTERE LE SORGENTI
I connettori di alta qualità disponibili sul 3.5mm può essere utilizzato per connettere
pannello posteriore di DS-10 permettono il sorgenti analogiche, come ad esempio il pre
collegamento di altri dispositivi, rendendolo phono PH-10.
il centro di un sistema audio moderno.
Sul DS-10 PLUS, l’ingresso LINE IN da
8 7
1 2 3 4 5 6
75
| CONTROLLO VIA APP EN
DE
SCARICA GN CONTROL
IT
La nostra app GN Control è la miglior
soluzione per controllare il DS-10 ed è
necessaria se vuoi connetterlo alla rete Wi-Fi.
È anche il modo più rapido per riprodurre la App Store Google Play Store
musica dai servizi online di streaming come
Tidal e Qobuz, e dalla libreria locale in caso
si usi un NAS o un HDD. Guarda il video tutorial per imparare ad
ascoltare musica in streaming, gestire le playlist
e controllare il tuo DS-10 tramite l’app.
Ripeti il
brano
corrente
Play/Pausa
Stop
Skip
Servizi streaming e
Queue locali
Favourites Seleziona il
dispositivo di
Cartelle e brani riproduzione
76
PLAY TO E MUSIC
MUSIC
Servizi di streaming
| Deezer
| Qobuz
| Spotify
| TIDAL
| vTuner
Servizi Cloud
| Dropbox
| OneDrive
Servizi locali
| Network NAS e servizi UPnP/DLNA
| Le unità flash USB sono indicate come
“DS-10 Server”
77
EN
DE
PANNELLO DI CONTROLLO
IT
Cliccando sull’icona delle informazioni
nell’angolo in alto a destra della schermata
di riproduzione, si accede al pannello di
controllo.
Il pannello di controllo duplica lo schermo
di DS-10 sullo smartphone, permettendo
l’accesso a tutte le caratteristiche e le
funzioni, inclusi il volume, la selezione
dell’ingresso, la funzione gapless e altro.
Selezione
ingresso
Network
Modalità Bluetooth
Camaleonte Coax
OFF AES/EBU
Preset 1 TOS-1
Preset 2 TOS-2
Preset 3
USB-DAC
Line In*
Power ON/OFF *solo su DS-10 PLUS
Questo bottone
spegnerà l’unità Livello di uscita
cuffie
High
Low
Gapless ON/OFF
78
CONFIGURAZIONE DEL
DISPOSITIVO
1 2 3 4 5
79
| TELECOMANDO EN
DE
UTILIZZO DEL TELECOMANDO
IT
Tutte le funzioni e le caratteristiche basta premere il tasto Enter per arrivare il
disponibili su DS-10 possono essere riquadro di selezione e i tasti IN+ e IN- per
modificate utilizzando il Knob Control e il spostaere il riquadro all’interno del display.
telecomando. Per usare il telecomando,
Power ON/OFF
Enter
Input selection
Mute
DAC
Display
80
| AGGIORNAMENTO FIRMWARE
www.goldnote.it/downloads_it
| REGISTRAZIONE PRODOTTO
81
| RISOLUZIONE PROBLEMI EN
DE
L’App non trova il DS-10 tra | Il DS-10 non è connesso | Assicurarsi che il DS-10
le reti disponibili. alla rete. sia connesso alla WLAN
o LAN tramite il cavo
Ethernet o Wi-Fi.
82
PROBLEMA CAUSA SOLUZIONE
PULIZIA DELLʼUNITÀ
Usare solo acqua o detergenti per superfici delicate con un panno morbido per rimuovere
polvere e/o macchie.
Qualsiasi acido o panno non estremamente morbido danneggerebbe irreversibilmente
l’estetica dell’unità.
Non usare alcol.
83
| PRODOTTI CORRELATI EN
DE
GIRADISCHI DIFFUSORI
IT
| PIANOSA | XT-7
Il design italiano incontra innovazione Diffusore innovativo con design full-range a
tecnica e finiture impeccabili. Pianosa è 3 vie, bass reflex e tweeter a nastro AMT.
un giradischi artigianale con un piatto da
23mm in polivinile smorzante e motore | A6 EVO II
alimentato da micro-controllore con Un diffusore snello e con un look italiano
selezione elettronica a 33/45rpm. che non rinuncia a una riproduzione audio
eccellente.
| VALORE 425 PLUS | A3 EVO II
Disponibile in 4 lussuose finiture, Valore Elegante e compatto, A3 EVO è un
425 Plus è un giradischi fatto a mano con diffusore a 2 vie con bass reflex. Look
un piatto da 23mm in PTE. Un design italiano e moderno, materiali straordinari e
classico che offre prestazioni audio suono audiofilo.
eccellenti.
ELETTRONICHE
| PH-10
Il PH-10 è un preamplificatore phono
completamente analogico che offre
caratteristiche uniche, tra cui CURVE EQ,
LOAD e GAIN regolabili e un’esperienza
utente intuitiva grazie al SKC (Single Knob
Control) e al display.
| PA-10
Il PA-10 è il nuovo amplificatore finale per
la piccola, ma non meno efficiente, linea di
prodotti chiamata Linea 10.
| PSU-10 EVO
La PSU-10 EVO è la super alimentazione
induttiva esterna sviluppata esclusivamente
per DS-10 e DS-10 PLUS.
www.goldnote.it
84
Designed and handmade in Firenze, Italy
www.goldnote.it
Akamai S.r.l. All rights reserved