Professional Documents
Culture Documents
Test2 Powerelectronics QP
Test2 Powerelectronics QP
UNIT TEST – II
6. The number of diodes required in a bridge rectifier is
a. 1
b. 2
c. 3
d. 4
7.
8.
a. 339 rpm
b. 359 rpm
c. 366 rpm
d. 386 rpm
9.
10. An SCR is a
12.
13.
14.
d. a dual converter
15.
a. 3
b. 6
c. 12
d. 18
16.
17.
18.
a. 0.5 to 0.6
b. 0.45 to 0.6
c. 0.5 to 0.65
d. 0.45 to 0.65
19.
20.
a. 40%
b. 30%
c. 20%
d. 10%
21.
22.
23.
24.
a. BJT
b. IGBT
c. MOSFET
d. GTO
25.
28.
29. A single-phase full-bridge voltage source inverter (VSI) is fed from a 300 V battery. A pulse of 120º
duration is used to trigger the appropriate devices in each half-cycle. The rms value of the fundamental
component of the output voltage, in volts, is
a. 234
b. 245
c. 300
d. 331
30. In the figure shown, all elements used are ideal. For time t<0, S1 remained closed and S2 open. At
t = 0, S1 is opened and S2 is closed. If the voltage Vc2 across the capacitor C2 at t = 0 is zero, the
voltage across the capacitor combination at t=0+ will be
a. 1V
b. 2V
c. 1.5V
d. 3V