ESN - OM926 Sandvik TH320 Maheshwari (West Bengal)
S No Check Points Present Status Remarks 1 Crankshaft endplay- Before output Drive Line fitment 2 Out put Drive Line connection (Equipment side Scope) 3 Crankshaft endplay- After output Drive Line Fitment 4 Self Starter condition / Fitment Status 5 Alternaotr condition / Fitment status 6 Alternator Belt Condition (New / Old) 7 Fan Belt Condition (New / Old) 8 ECM Status (New / Old) 9 Interface Wiring Harness Conditions and status 10 Power Harness condition and status 11 Engine Ground condition and status 12 Cabin - Warning lights illumination status (CEL & SEL) 13 Warning Hooter functioning status 14 CLS function status (New / Old) Air Cleaner Housing condtion / Status 15 (Dents/ Rubber sealing/ Element sealing area etc) 16 Cyclonic Tubes status (Clean / chock)- Cleaning Required Air system- Hump hoses / Elbow hoses- condition 17 (crank free, hard, damage, Puncture etc.,)- New / Old 18 Clamps condition (New / Old) 19 Air system piping supports- must be proper 20 Vent hose connection status and condition- (New / Old) 21 Vaccumme Indicator function (New / Old) 22 Air Filter elements must be new- Sealing to be checked 23 Radiator cleaning / Flushing status 24 Diesel Tank Flushing Hoses and clamps of Cooling sytem pipes- 25 Hoses must be with new with proper clamping 26 Engine Mounting Pads- must be with new 27 Engine Oil priming- before engine start 28 Recommanded coolant to be filled. 29 Fuses / Circuit breakers in engine wiring circuits 30 Battery should be fully charged and installed 31 Radiator Fan condition- It should be center from all 4 sides 32 Engine Oil grade / Brand / Level on Dipstick