Professional Documents
Culture Documents
Cat Ii QP Am Set 2
Cat Ii QP Am Set 2
Reg.No:
Max.
Q.No Question CO BL KC PI
Marks
1. What is Direct Metal Deposition Process. 02 CO 3 K1 F 1.4.1
2. Define MJM Process. 02 CO 3 K1 C 1.3.1
3. What is Selective Laser Sintering 02 CO 4 K1 F 1.4.1
4. List the Basic elements of 3DP. 02 CO 4 K2 F 1.4.1
PART – B (5 x 13 = 65 Marks)
Max. CO BL KC PI
Q.No Question
Marks
11 (a) (i) How Does Directed Energy Deposition Work? 13 CO 3 K3 P 2.4.1
(OR)
Extrapolate the applications, advantages and 13 CO 3 K3 F 3.1.4
11 (b) (i) Disadvantages of MJM Process and Directed
Metal Deposition process.
Demonstrate the working principle of SLS 13 CO 4 K3 P 3.1.4
12 (a) (i)
Process.
(OR)
Apply the different process of powder based K3 C 5.1.2
12 (b) (i) 13 CO 4
Additive manufacturing systems.
Max. CO BL KC PI
Q.No Question
Marks
How Does Three-dimensional Printing (3DP) K3 P 2.4.1
13 (a) (i) 13 CO 4
Work?
(OR)
13 (b) (i) Explain the Process parameters of EBM. 13 CO 4 K2 F 2.4.1
Generalise in detail how personalisation and K3 F 3.1.4
14 (a) (i) 13 CO 5
customization done using Rapid prototyping.
(OR)
Relate the Case study on Low volume K3 M 5.1.2
14 (b) (i) 13 CO 5
production of Peak Additive
Relate the Case study on Accurate, custom K3 M 5.1.2
15 (a) (i) 13 CO 5
surgical dental guides of Formlabs
(OR)
Interpret the Case study on ABS Portable K3 M 5.1.2
15 (b) (i) 13 CO 5
Electronic Tour Guide.
PART – C (1 x 15 = 15 Marks)
Max. CO BL KC PI
Q.No Question
Marks
16 (a) (i) Compare and contrast SLA and SLS 15 CO 4 K3 F 3.1.4
(OR)
Interpret the Case study on Prototyping Air Inlet K3 M 5.1.2
16 (b) (i) 15 CO 5
Housing for Gas Turbine Engine.
Bloom's Mark
Questions No.s %
Level s
K1 1,2,3,6,7,9 12 6.66 Remember
K2 4,5,8,10, 13(b) 21 11.66 Understand
11(a), 11(b), 12(a),12(b), 13(a), 14(a),14(b),
K3 147 81.66 Apply
15(a), 15(b), 16(a), 16(b)
K4 Analyze
TOTAL 180 100.0