You are on page 1of 16
1218122, 10:12PM METER / GAUGE DISPLAY: METER / GAUGE SYSTEM: SYSTEM DESCRIPTION; 2011 MY RX350 [08/2010 ~ 1 [Last Modified: 9-1-2022 (6.11:8.1.0 [Doc 1D: RM0000012G305RX [Model Year Start: 2011 (Model: RX350 [Prod Date Range: [08/2010 - ] 1 (Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: SYSTEM DESCRIPTION, 2011 MY RX350 [08/2010 - Engine Coolant Temperature Receiver Gauge SYSTEM DESCRIPTION 1, OUTLINE OF COMBINATION METER ASSEMBLY ‘Muti-information Display — ‘Speedometer \ 4 C1) ‘ODOrTRIF Meter —! ‘— art shift indicator Ful Receiver Gouge (2) Meter or Gauge DETAIL Speedometer Indicates the vehicle speed based on a signal received from the skid control ECU via the CAN (CAN No. 1 Bus). ‘Tachometer Indicates the engine speed based on a signal received from the ECM via the CAN (CAN No. 1 Bus). Fuel Receiver Gauge Indicates the fuel level based on a signal received from the fuel sender gauge assembly via the direct line. Engine Coolant Temperature Indicates the engine coolant temperature based on a signal received from the Receiver Gauge ECM via the CAN (CAN No. 1 Bus). {(b) Warning or Indicator ITEM DETAIL Receives a beam indicator light signal from the main body ECU (multiplex network body ECU) Beam via the CAN (CAN No. 1 Bus) rturn Receives a turn signal from the turn signal flasher via the dlrect line. Fuel Receives a fuel signal from the fuel sender gauge via the direct line. brake Receives a brake signal from the brake fluid level warning switch via the direct line, the skid control ECU, and main body ECU (multiplex network body ECU) via the CAN (CAN No. 1 Bus). -ntps:tech nfo oyoia.comi3Portalitesourcesispsiviewerindex sp?di=mvRMT8HOUIY inRMOO0O0SVTBOOSX.him/alocale=en&mod: x3. ws. 1218122, 10:12 M METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: SYSTEM DESCRIPTION: 2011 MY RX350 08/2010 - J TTEM DETAIL SRS. Receives an SRS signal from the center airbag sensor assembly via the CAN (CAN No. 1 Bus). open door Receves a oor codon signal from the main body ECU (multiplex network body ECU) via the Charge Receives a charge indicator light signal from the generator via the direct line. MIL (Check’ engine warning light) Receives a MIL (check engine warning light) signal from the ECM via the direct line, Driver side seat belt Receives a driver side seat belt signal from the main body ECU (multiplex network body ECU) via the CAN (CAN No. 1 Bus). ‘ABS Receives an ABS signal from the skid control ECU via the CAN (CAN No. 1 Bus), EPS, Receives an EPS signal from the power steering ECU via the CAN (CAN No. 1 Bus). ‘Automatic high Receives an automatic high beam signal from the main body ECU (multiplex network body beam*1 ECU) via the CAN (CAN No. 1 Bus) Head*2 Receives a head signal from the main body ECU (multiplex network body ECU) vie the CAN (CAN No, 1 Bus) saile3 Receives a tail signal from the main body ECU (multiplex network body ECU) via the CAN (CAN No, 1 Bus) [AWD lock" Receives an AWD signal from the AWD control ECU via the CAN (CAN No. 1 Bus). \VSC OFF Receives a VSC OFF signal from the skid control ECU via the CAN (CAN No. 1 Bus) ECO Receives an ECO driving signal from the ECM via the CAN (CAN No. 1 Bus). ECT snow Receives an ECT snow signal from the ECM via the CAN (CAN No. 1 Bus). PCS#5 Receives a PCS signal from the driving support ECU assembly via the CAN (CAN No. 2 Bus). Cruise main6 Receives an cruise main (constant speed control mode or vehicle-to-vehicle distance control mode) signal from the driving support ECU assembly via the CAN (CAN No. 2 Bus). Tire pressure*7 Receives a tire pressure signal from the tire pressure warning ECU via the direct line. Slip Receives a slip signal from the skid control ECU via the CAN (CAN No, 1 Bus) Cruise main Receives a cruise main signal from the ECM via the CAN (CAN No, 1 Bus) art shit Receives an A/T shift condition signal from the park/neutral position switch (direct line)*7 and the ECM via the CAN (CAN No. 1 Bus). Clearance Receives a clearance sonar signal from the clearance warning ECU via the CAN (CAN No. 2 sonar*8 Bus). ‘ars OFF*9 Receives a AFS OFF signal from the main body ECU (multiplex network body ECU) via the CAN (CAN No. 2 Bus) Master warning Comes on when the reminder message or warning message appears on the multi-information display. Front passenger side seat belt warning Receives a front passenger side seat belt signal from the center airbag sensor assembly via the CAN (CAN No. 1 Bus) or the front seat inner belt assembly RH via the direct line*10 and send the front passenger side seat belt warning signal to the accessory meter assembly*11 or the radio receiver assembly*12 via the direct line. Front fog Receives a front fog signal from the main body ECU (multiplex network body ECU) via the CAN (CAN No. 1 Bus) hitpsechinfooyota.comitaPonaliresourcessspisivieworlindex sp?ar=rm/RM 16HOURHref=xhtml/RM000003VTBO08X himlslocale=enémod XS. 26 1218122, 10:12 M METER GAUG! | DISPLAY: METER | GAUGE SYSTEM: SYSTEM DESCRIPTION; 2011 MY RX360 [08/2010 - 1 *1: w/ Automatic High Beam System #2: for USA. =3: except U.S.A 4: for AWD *5: w/ Pre-collision System *6: w/ Dynamic Radar Cruise Control System. *7: w/ Tire Pressure Warning System *8: w/ Intuitive Parking Assist System *9: w/ AFS: +10: w/o Occupant Classification System 11: w/o Navigation System *12: w/ Navigation System 2. MULTI-INFORMATION DISPLAY hips sechinfooyota.comit3Pontaliresourcessspisivieworlindex;spdr=rm/RM 6HOUBHref=xhtml/RMO00003VTBO08X himl&locale=en8mod RKB. ans. 121812, 10:12PM METER GAUG! | DISPLAY: METER | GAUGE SYSTEM: SYSTEM DESCRIPTION; 2011 MY RX350 (08/2010- ITEM DETAIL Cruise Information display ‘Average fuel ‘consumption after refueling ‘Average fuel consumption speed ‘Current fuel consumption Driving range ‘Average vehicle Five types of information (average fuel consumption after refueling, average fuel consumption, average vehicle speed, current fuel consumption, and driving range) can be displayed, ECO driving indicator zone display + In addition to the cruise information display, the combination meter assembly indicates the ECO driving indicator zone display. 2. The ECO driving indicator zone display will be displayed when all of the following conditions are met: i. Engine switch is on (1G). li, Shift lever is in D, lil, Snow mode is not selected. b. The multi-information display is used to display the ECO [ore aiesiay a | Blocroric features —l~} contiot mode display ‘Customization display Dynamic radar cruise ‘contol display im | cycle display ‘Advisory display 1 pss ‘Advisory display 2 New message <== Contition not met <==: Condition met -

You might also like