Professional Documents
Culture Documents
Connecting 3g EQ Network Dell Laptop
Connecting 3g EQ Network Dell Laptop
This document provides a step by step guide to connecting your Dell E5410 model laptop to the EQ 3G wireless network. This document should only be used
for laptops configured with MOE.v3 (Windows 7).
Before attempting to logon to your new laptop with your MIS username and password, please ensure you have joined the domain.
There are a number of important steps for connecting your Dell laptop to the EQ 3G Network, each of these are outlined in the tables below.
This step should only be completed if you have previously installed the EQ 3G zip file and have not been able to run the program.
These instructions should only be completed while connected to your school network. Please ensure you connect the laptop to a blue data cable before
completing the steps outlined in the table below.
Please note:
1
The wireless switch is located at the front of the
laptop.
4
The EQ 3G zip file will now be pasted to your Desktop.
5
The Select a Destination and Extract Files window will
open.
7. Click Extract 6
D:\Mis Username\Desktop\EQ 3G
8
The EQ 3G folder will open.
11
Note: If this folder does not exist you will have to create a
new CFT folder:
Note: If this folder does not exist you will have to create a
new Install folder:
Note: If this folder does not exist you will have to create a
new e5410 folder:
15
16
17. Right click 3G Config.cmd.
17
18
1
Before attempting to connect to the EQ 3G network for
the first time, you must set the Location Information.
2. Click Properties.
2
The Location Information window will open.
4. Click OK twice.
4
A Phone and Modem window will open.
5. Click OK.
5
You will now be directed to the EQ 3G Properties window
6. Click OK.
6
You will now return to the EQ 3G network window.
9. Click Connect.
9
You should now be connected to the EQ 3G wireless
network.
Please note
If you receive a connection error message, restart
your laptop and try connecting to the 3G EQ network
again. If you still fail to establish a connection after
restart, please contact the Service Centre.
When prompted, please ensure you change your EQ
3G wireless password. Failure to do so within the
warning period will prevent you from connecting to
the EQ 3G wireless network in the future.
Connect automatically.
Save password.
The Set Network Location window will now open
10
2
4. Select EQ 3G from the list of available network
connections.
5. Click Connect.
6
6. Please disregard this icon if it appears in your task
bar advising you are not connected to the internet.