Professional Documents
Culture Documents
Experiment 4 CIM
Experiment 4 CIM
04
Title- Prepare Computer Aided Process Plan for selected part using variant type of CAPP
Software
Procedure-
9.click on mill tab then select standard -in reference select details .
In hole dialogbox select rule diameter & select 10 also & click on surface of hole in part .&
click ok
10.chose parameter tab enter the cut speed , & spindle speed
12.FOR MILLING – click on work centre – chose mill – select tool tab & click on tool
In tool window select type milling & enter material HSS & also enter diameter of tool 5& click
ok
13.click on operation click ok
14.select mill tab – select pocketing – in menu manager click done then in tool setup click ok .
In edit parameter of sequence pocket milling enter cut speed , step depth & clear_dist ,
spindle speed.then click ok
in menu manager select model &click on done --select milling surface again click on done
15.FOR TURNING
Select work centre -click on lathe – in lathe work centre tab click ok – click on operation click
ok
16.select turn profile click on then slect co-ordinate system – click on this
17.draw sketch