Professional Documents
Culture Documents
7241-1
First edition
1987-04-01
Part 1 :
Dimensions and requirements
iTeh STANDARD PREVIEW
Transmissions
(standards.iteh.ai)
h ydrauliques - Ratcords rapides -
Reference number
ISO 7241-1: 1987 (E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Printed in Switzerland
~--~ ~~
INTERNATIONAL STANDARD ISO7241-1 : 1967 (E)
Part 1 :
Dimensions and requirements
0 lntroduction 3 Definitions
In hydraulic fluid power Systems, power is transmitted and con- For the purposes of this patt of ISO 7241, the definitions given
trolled through a liquid under pressure within an enclosed cir- in ISO 5598 apply.
cuit. Quick-action couplings are used to join or separate quickly
fluid conducting lines, without the use of tools or special
devices. iTeh STANDARD 4PREVIEW
Dimensional requirements
(standards.iteh.ai)
4.1 Series “A” dimensional requirements are shown in
figure 1 and given in table 1.
1 Scope and field of application ISO 7241-1:1987
https://standards.iteh.ai/catalog/standards/sist/3b30557a-8bee-4738-afa6-
4.2 Series “B” dimensional requirements are shown in
This part of ISO 7241 lays down the interface e780e1788f87/iso-7241-1-1987
dimensions and figures 2 and 3, and given in tables 2 and 3.
specifies basic Performance requirements for two series of
general-purpose hydraulic quick-action couplings. Both series
are in widespread use and have similar technological advan- 5 Performance requirements
tages. The distinction in usage is mainly geographical. Series
“A” is used predominantly in Europe and series “8” is predomi- 5.1 Pressure rating requirements are given in table 4.
nant in America.
2 References
6 Summary of information to be supplied
ISO 2944, Fluid power Systems and components - Nominal
pressures. The quick-action coupling “series” and coupling “size” shall be
stated when applying this patt of ISO 7241 to a particular use.
ISO 4397, Fluid power Systems and components - Connec-
tors and associated components - Outside diameters of tubes
and inside diameters of hoses. 7 Identification Statement (Reference to this Inter-
national Standard)
ISO 5598, Fluid power Systems and components -
Vocabulary. Use the following Statement in test repotts, catalogues and
sales literature when electing to comply with this part of
ISO 5675, Agricultural tractors and machinery - Hydraulic ISO 7241:
couplers for general purposes - Specifications.
“Dimensional and pressure requirements conform to
ISO 7241-2, Hydraulic fluid power - Quick-action couplings - ISO 7241-1 1)I Hydraulic fluid power - Quick-action couplings
Part 2: Test methods. - Part 1: Dimensions and requirements.”
H c
The valve shape
is optional 1) 7 a G w
Dimensions in millimetres
Maximum
Gauge B C D E F G H J K L M N
Size valve open
diameter min. MaX. min. f0,0025 max. min.
forte
A
2) 1) 3) 4)
44O
6,3 18,7 12,9
13
11,73
11,86
13 13 0,7
lt5
5,5
5,7
66
68 14,5
46O
3,968 0,5 3,7 -
20 37,l 30,4 29 5,4 7,2 1 15,9 17,5 27,5 44O 4,762 0,6 13,7 -
30,5 29,l 2,5 16,l 17,7 46O
26 QO 36,5 34,21 78' 83 lt5 19,7 22,8 34 44O 4,762 0,7 16,3 -
36,6 3434 3 20 23 46O
* G
j iz
E .,F
@L, galrge ball
16
I
4
,'/
#'/
l-f
tL--
l --- -
'\ The shape of the neck
\ receiving the bearings
“\ - in the coupled Position is left
to the manufacturer
ISO 7241-1:1987
https://standards.iteh.ai/catalog/standards/sist/3b30557a-8bee-4738-afa6-
Figure 2 - Dimensional requirements, series “El” - Sizes 5 to 25
e780e1788f87/iso-7241-1-1987
D E F G H J K L M
min. max. min. min. max. -to,Om5 max.
2)
10,8 o,a 11,28
10,9 2,16 2,79 13 7,87 11,48 18,92 16O 3,175 1,02
19 1,07 15,52
19,l 3,05 4,83 1,73 12,45 15,72 24,89 16O 4,763 1,02
1) The size designation correspond ; to the nominal inside diameter of the hose recommended for use with the coupling, see ISO 4397.
2) Radius or chamfer length. Radiu s with chamfer is optional.
3
ISO7241=1:1987(E)
@ L , gauge ball
Valve closed M
iTeh STANDARD PREVIEW \ Minimum hardness 86HR 15N
at ball contact point
‘-“,N
(standards.iteh.ai) Valve open
against stop
ISO 7241-1:1987
https://standards.iteh.ai/catalog/standards/sist/3b30557a-8bee-4738-afa6-
e780e1788f87/iso-7241-1-1987
- .. rressure a=
rating 1)
lat>Ie -
1 A
5 - 3) 10 (1 OW
63 10 (1 Qoo) 10 (1 000)
10 10 (1 000) 63 (630)
12,5 6,3 (630) 5 (500)
m 3,15 (315) 23 (250)
25 2,5 (250) 2 (200)
31,5 1,25 (125) - 3)
40 0,63 (63) 1,25 (125)
50 0,5 (50) 015 (50)
U DC 621343.415
Descriptors : hydraulic fluid power, hydraulic equipment, quick action couplings, specifications, dimensions.