Professional Documents
Culture Documents
Introduction
Safety Guidelines
Introduction
Welcome to the UVify IFO Maintenance Manual, a guide covering essential components for effective maintenance. Topics include propeller care, landing
gear inspection, battery maintenance, battery cap replacement, SD card handling, and an inclusive in-the-box list. This manual provides straightforward
guidance for routine tasks, ensuring the reliability and durability of your UVify IFO for continued optimal performance.
Safety Guidelines
Warning
SD Card Handling:
Exercise caution when inserting or removing SD cards to prevent damage to the card or card slot.
Ensure the IFO is powered off before accessing or changing SD cards to avoid electrical risks.
In-the-Box List:
Use caution when unpacking to prevent injury from sharp packaging materials.
Verify the contents against the provided in-the-box list to ensure all components are accounted for before use.
Caution
Propeller Maintenance:
Avoid direct contact with rotating propellers during inspection.
Ensure the IFO is powered off before handling propellers to prevent accidental activation.
Landing Gear Inspection:
Exercise caution when inspecting landing gear to avoid pinching fingers or hands.
Always conduct inspections on a stable and flat surface to prevent accidental tipping.
Battery Maintenance:
Charge batteries in a well-ventilated area away from flammable materials.
Avoid overcharging or discharging batteries beyond recommended levels to prevent potential hazards.
UVify IFO Propeller
Introduction
Differentiating Propellers
Checking and Replacing Propellers
Tools Needed for Propeller Replacement
Replacing Propellers
Safety Guidelines
Introduction
The UVify IFO is designed in the quadcopter configuration, equipped with four propellers to ensure stability and minimize the impact of wind
disturbances. This quadcopter setup provides enhanced control and maneuverability during flight, making it well-suited for various applications, including
drone light shows, advertising, stage backgrounds, and message delivery. The four propellers contribute to the IFO's ability to navigate through the air with
precision, creating captivating aerial displays and ensuring a reliable performance in diverse environments.
Differentiating Propellers
In the case of the IFO drone, two propellers rotate clockwise, while the other two rotate counterclockwise. It is crucial to ensure that the upper side of
IFO is facing upward during installation. Refer to the image below to distinguish between the propellers.
Make sure to follow the directional indications provided in the image when installing the propellers. Clockwise and counterclockwise rotation is a key
factor in proper drone functionality, and accurate installation is essential for safe and efficient operation.
Caution
If a propeller is faulty or broken, it can lead to the drone falling and potential damage to the product. Before flying the drone, ensure there is no
damage to the propellers.
DO NOT fly the aircraft if there is any blockage or rubbing mentioned above. It is necessary to repair.
Motor Holder
Replacing Propellers
5. For motors rotating clockwise, secure them with a motor holder, and turn the nut counterclockwise to tighten.
a. For motors rotating counterclockwise, secure them with a motor holder, and turn the nut clockwise to tighten.
Safety Guidelines
Warning
Exercise caution to avoid losing screws when replacing components. If screws are lost, contact customer service for assistance.
Caution
Introduction
The SD card stores flight records, including flight telemetry, aircraft status information, and other settings. Flight records must not be tampered with and
can only be accessed by UVify. Unauthorized manipulation, sharing, leakage, or access to flight records may result in legal consequences.
2. Once the top lid is removed, position the IFO sideways to access the SD card slot conveniently.
3. Gently press the existing SD card to release it from its slot. Allow it to pop up, making it easier to remove.
4. With the SD card popped up, carefully lift and remove it from the slot. Ensure a steady and controlled motion to prevent any damage.
5. Take the new SD card and insert it into the designated slot. Pay close attention to the orientation, ensuring the face of the SD card is upward. Insert it
into the right port for proper alignment.
6. Once the new SD card is in place, secure the IFO by reattaching the top lid. Use the hex wrench to tighten the four screws, ensuring a secure and stable
connection.
7. Use the hex wrench to fasten the four screws securely, tightening them evenly to reattach the top lid.
Safety Guidelines
Warning
Do not remove the SD card arbitrarily. Flying without the SD card violates regulations and is not recommended for safety reasons.
Be cautious not to misplace or lose any of the four screws during the removal of the top lid.
Losing screws may lead to instability and potential damage to the IFO during operation.
Pay close attention to the orientation of the SD card during removal and insertion to avoid incorrect positioning.
Incorrect orientation may lead to functionality issues and potential damage to the SD card or the slot.
Ensure proper alignment of the top lid during reassembly to prevent misfit or instability in the IFO structure.
Tighten screws evenly to avoid misalignment or damage to the top lid.
Caution
Exercise caution when using the hex wrench to avoid damaging the screws or the IFO casing.
Be mindful of the wrench's size and compatibility with the screws to prevent stripping or overtightening.
Handle the SD card with care during removal to prevent any bending or damage to the card or the slot.
Avoid applying excessive force when pressing or lifting the SD card to prevent potential damage.
UVify IFO Storage
Introduction
Stacking UVify IFO
Storing UVify IFO
Introduction
Welcome to the UVify IFO Storage section, focusing on the practical methods of stacking and storing IFOs. This guide provides step-by-step instructions
for secure stacking and proper storage in the IFO box, ensuring efficient organization for your UVify IFOs.
Introduction
This section details the procedure for replacing the IFO battery cap. Follow the step-by-step instructions to ensure a secure attachment, maintaining the
stability of the battery during light shows. Accurate replacement is essential for uninterrupted power supply and overall flight stability. If you encounter
any issues during the replacement process, consult this guide for practical guidance. A properly replaced battery cap contributes to a reliable and
uninterrupted drone light show experience.
3. Insert the new retention device, aligning it with the correct orientation.
Do not install the battery cap upside down, as this may obstruct the insertion or removal of the battery.
Upside-down installation may result in operational issues and could necessitate professional assistance for correction.
Safety Guidelines
Warning
If you encounter difficulty in inserting or removing the battery after cap replacement, immediately inspect for potential misalignment.
Refrain from forcing the battery or cap and seek assistance from UVify Customer Support if needed.
Caution
Exercise caution when handling the IFO battery cap to prevent potential damage to the cap or its attachment points.
Avoid applying excessive force during the replacement process to maintain the integrity of the battery cap.
Ensure the correct alignment of the battery cap during replacement to prevent misplacement or improper attachment.
Verify that the cap is securely fastened before initiating any drone operations.
UVify IFO Landing Gear
Introduction
Landing Gear
Example of Broken Leg
Safety Guidelines
Introduction
These legs are specifically designed for easy movement and management of multiple drones. However, if screws become loose or the legs are damaged
due to an impact, it is crucial to contact the UVify customer service for a thorough inspection.
Landing Gear
The IFO is equipped with four landing gears, each featuring propeller motors on top and essential wires underneath. These landing gears are crucial
components, with attached antennas playing a significant role. It's imperative to handle the landing gears with care, ensuring they maintain their
normal form. Incorrect stacking, dropping during transport, or falls during light shows may lead to breakage or bending of the landing gears. In case of
any damage, it is strongly advised to contact UVify Customer Support for assistance. Regular maintenance and cautious handling contribute to the
longevity and optimal performance of the IFO's landing gear.
Safety Guidelines
Warning
Do not drop the IFO during transport, as it may lead to damage or misalignment of the landing gears.
Take precautions during light shows to prevent accidental falls, which could result in landing gear damage.
Be mindful of surroundings to avoid collisions with obstacles that may damage or displace the landing gears.
During performances, ensure sufficient clearance to prevent interference with structures or other IFO units.
In case of any impact or suspected damage to the landing gears, immediately inspect for bends, breakages, or misalignments.
If damage is identified, refrain from using the IFO, and contact UVify Customer Support for assistance.
Caution
Do not disassemble or attempt to repair the legs yourself, as this may lead to damage to IFO’s mainboard, antennas and propellers.
Exercise caution when handling IFO legs to prevent any damage to the propeller motors or attached antennas.
Avoid applying excessive force or pressure to the landing gears during installation or removal.
Ensure correct stacking orientation to prevent potential breakage or bending of landing gears when storing or transporting multiple IFO units.