You are on page 1of 3

Republic of the Philippines

SORSOGON STATE UNIVERSITY


College of Technology
Electronics Technology
Sorsogon City Campus
Magsaysay Street, Salog (Pob.) Sorsogon City, Sorsogon
Tel. No.; 056 211-0103 loc. 1371; Email address: _______@sorsu.edu.ph

ACTIVITY 5, 6, 7
INDUSTRIAL ELECTRONICS
Second Semester, AY 2023-2024

TITLE: Relay Module using Arduino

Name: Year/Section:

Direction:

ACTIVITY 5: The Lamp will Turn-on for 10 seconds and it will Turn-off for 5 seconds then the
Lamp will Turn-on again but this time for 6 seconds only then it would turn-off again for 3
seconds only.

Wiring Diagram

Code
Republic of the Philippines
SORSOGON STATE UNIVERSITY
College of Technology
Electronics Technology
Sorsogon City Campus
Magsaysay Street, Salog (Pob.) Sorsogon City, Sorsogon
Tel. No.; 056 211-0103 loc. 1371; Email address: _______@sorsu.edu.ph

ACTIVITY 6: If the push button is pressed, the Lamp turns on. If the push button is unpressed,
the Lamp turns off. (Do this using two push buttons, 2 channel relay, and two lamps).

Wiring Diagram

CODE
Republic of the Philippines
SORSOGON STATE UNIVERSITY
College of Technology
Electronics Technology
Sorsogon City Campus
Magsaysay Street, Salog (Pob.) Sorsogon City, Sorsogon
Tel. No.; 056 211-0103 loc. 1371; Email address: _______@sorsu.edu.ph

ACTIVITY 7: If the push button is pressed, the Lamp turns on. If the push button is pressed
again, the Lamp turns off. (Latching circuit). There is an LED indicator that turns Off when the
Lamp is ON. (Do this using two push buttons, two channel relay, and one lamp).

Wiring Diagram

Code

You might also like