Professional Documents
Culture Documents
(Catalog) Msi Marine Offshore Catalog 1 1
(Catalog) Msi Marine Offshore Catalog 1 1
CO R PO R ATE HE ADQUARTE RS
800-234-0135
414-973-1331
FAX/800-627-6432
414-973-1332
delivery worldwide.
SALES OFFICES
Pipe and Valve Identification,
Malaysia
Marking Services Inc. (M) Sdn Bhd IMO, Safety and Operations Signs
+65-6-872-1529
FAX/+65-6-872-1669
email: sales@markingservices.com.sg
M I DDLE E AST
+971-2-634-0403
FAX/+971-2-634-4430
Abu Dhabi Industrial Supply
Suite 102, Al Ghahedi Tower
P.O. Box 27679, Al Falah Street
Abu Dhabi – United Arab Emirates
email: adis@emirates.net.ae
www.adis-uae.com
CANADA
780-955-9303
FAX/780-955-9322
Bay #6
702-12 Avenue
Nisku, Alberta T9E7P7
email: mop@markserv.com
C O NT E NT S
26 International Safety –
Warning Signs
28 Operation Signs
mop@markserv.com | www.markserv.com
MSI pipemarkers are the
premier marker in the industry
• Guaranteed
for five years, Maxilar™ Markers
eliminate the need for costly re-labeling
MS-995 pipe identification labels provide operators a quick, accurate snapshot of critical I n s t a ll a t i o n
To assure the greatest possible visibility, marker location should take into account the most
information such as pipe content, flow direction, origin and destination. Proper pipe probable operator position(s), location of other piping, equipment, valve and functional rela-
tionship to other components. The following locations should be considered as a minimum:
labeling eliminates the need to trace lines, promotes a greater understanding of piping
• At least one in each room • V
essel columns, vendor-furnished • A
ll lines entering and exiting
layouts, translating to a quicker commissioning of a new build or facility upgrade. skids and utility stations should be manifolds should be marked for
• O
ne at each side of all bulkheads marked once at all line entries and exits. clear viewing from the position
and deck penetrations; within 3 of valve operation.
meters of penetration or at eye-level. • P
ipe racks should be marked at
approximately 8-10 meter intervals, Note: When installing markers
• P
ump and compressor lines are and within 3 meters of major pipe rack consider visibility from normal
marked once at the suction and intersections (lines in pipe racks should working areas and access points.
once at discharge lines. be marked at the same cross section).
Left Center Right
MARINE AND OFFSHORE band band band
Pipe contents (38mm) (224mm) (38mm)
Waste Media
black water black blue black
and Tapes
www.markserv.com
exhaust gas black gray black
sewage-contaminated black yellow black
waste oil / used oil black brown black
gray water black white black
Fresh Water
and Offshore Facilities cooling fresh water blue violet blue
distillate blue gray blue
|
• C omply with the “RECOMMENDED” feed water blue silver blue
mop@markserv.com
ISO-14726-1 & 2 “Ship and Marine fresh water-sanitary blue brown blue
Technology Indentification Colors for gas turbine wash water blue orange blue
the Content of Piping Systems” where potable water blue green blue
outer bands (38mm) denote family colors
(i.e. blue for fresh water, brown for fuel), aviation fuel brown blue brown
and inner/center band (224mm) denotes biological fuel brown violet brown
Fuel
specific services within the gas turbine fuel brown white brown
family (i.e. maroon for drill water, grey HFO (heavy fuel oil) brown black brown
for distilled water). MDO (marine diesel fuel) brown yellow brown
Sea Water
cation for Identification of Pipelines and cooling sea water green yellow green
Services), or with internal company/facil- decontamination water green blue green
ity specifications for color coding. sea water-sanitary green brown green
Typical pipe marker installation
breathing air gray white gray
Customized MS-995 Maxilar™
Non-Flammable Gas
breathing gas gray yellow gray
Pipe Markers compressed air (hi-press) gray red gray
compressed air (lo-press) gray orange gray
Relate P&ID’s to the actual piping inert gas gray brown gray
configuration within the facility nitrogen gray green gray
through the use of specialized pipe To Order:
oxygen gray blue gray
identification markers. Specify quantity, contents and style designation.
refrigerant gray maroon gray
control air/regulatory air gray violet gray
• Printed legends on center band can Pipe diameter Marker style Character height Marker type
include pipe contents, line number, line 10mm-25mm (.5"- 1") A 12mm (.5") Wrap Around hydraulic fluid orange gray orange
origin (“from”) and destination (“to”) lubrication oil-engines orange yellow orange
Than Fuel
Oil Other
26mm-65mm (1.25"- 2.5") B 20mm (.75") Wrap Around
P&ID numbers and flow arrow. lub. oil-gas turbines orange green orange
66mm-127mm (2.5"- 4.75") D 30mm (1.25") Wrap Around
lubrication oil-gears orange violet orange
• Customize markers to conform to the 128mm-203mm (5"- 7.5") E 30mm (1.25") Wrap Around lub. oil-steam turbines orange silver orange
following International Standards: 204mm-255mm (8"- 10") J 30mm (1.25") Wrap Around thermal fluid orange blue orange
ISO-14726-1 & 2, BS-1710/BS-4800
256mm-300mm (11"- 12") K 30mm (1.25") Wrap Around
and ASME A13-1 exhaust steam silver white silver
Steam
301mm-380mm (13"- 15") L 30mm (1.25") Wrap Around
steam for heating silver black silver
381mm-455mm (16"- 18") N 30mm (1.25") Wrap Around supply steam silver yellow silver
Larger sizes available. Please call an MSI sales representative.
atmospheric air white green white
Pipe Marker Color Code Board
Fire Fighting
for Identification of Pipelines and fire fighting gas red gray red
Services,” or internal company/
facility specifications.
fire fighting powder red white red
fire fighting water red green red
spray water red violet red
sprinkler water red orange red
Pipe contents INDICATED IN
Flammable
CHART can be customized per acetylene yellow gray yellow
your company standards. hydrogen yellow blue yellow
gas
Examples of customized MS-995 liquid gas yellow violet yellow
MARINE AND OFFSHORE
Signs
Pipe Markers
and Tapes
MS-900 Vinyl Color
Banding Tape
MS-215 F (30 mil) for semi-rigid (recommended for mounting on curved surfaces.)
www.markserv.com
for identifying critical signs or MS-900
life saving equipment. Photoluminescent self-
adhesive labels.
• Clearly identify the Lifebuoy, Immersion Suit Survival Craft
location of life saving • If verbiage (English/ Light & Smoke Part #: IMO 101 Portable Radio
and rescue equipment other) or custom signage Part #: IMO 100 Part #: IMO 102
in the event of an is needed, please contact
emergency. an MSI sales representative.
|
mop@markserv.com
EPIRB Radar Transponder Rocket Parachute Flare Child's Life Jacket Distress Signal
Part #: IMO 103 Part #: IMO 104 Part #: IMO 105 Part #: IMO 106 Part #: IMO 107
Start Engine Secure Hatches Life Jacket Lifebuoy with Light Embarkation Ladder Davit Liferaft Launch Liferaft
Part #: IMO 123 Part #: IMO 124 Part #: IMO 108 Part #: IMO 109 Part #: IMO 110 Part #: IMO 111 Part #: IMO 112
Lower Liferaft to Water Release Grips Lifeboat Straight Arrow Angled Arrow Exit Right Exit Left
Part #: IMO 125 Part #: IMO 126 Part #: IMO 113 Part #: IMO 114 Part #: IMO 115 Part #: IMO 116 Part #: IMO 117
Air Supply Lower Lifeboat to Water Muster Station Muster Station (Ships) Line Throw Lifebuoy Lifebuoy with Rope
Part #: IMO 127 Part #: IMO 130 Part #: IMO 118 Part #: IMO 119 Part #: IMO 120 Part #: IMO 121 Part #: IMO 122
All Life Saving & Rescue signs are Fasten Seat Belt Release Falls Evacuation Slide
Part #: IMO 128
Rescue Boat
Part #: IMO 129
Evacuation Chute
Part #: IMO 135
Lifebuoy with
Light and Rope
Lifebuoy with
Smoke and Rope
Part #: IMO 131 Part #: IMO 132
150mm (6") square Part #: IMO 136 Part #: IMO 137
www.markserv.com
IMO/SOLAS requirements outdoor grade semi-rigid
for identifying essential plastic signs or MS-900
evacuation and escape Photoluminescent self-
routes. adhesive labels. Part #: IMO 204 Part #: IMO 205 Part #: IMO 206
|
Part #: IMO 207 Part #: IMO 208 Part #: IMO 209
mop@markserv.com
Part #: IMO 210 Part #: IMO 211 Part #: IMO 212
Part #: IMO 201 Part #: IMO 216 Part #: IMO 217 Part #: IMO 218
Part #: IMO 202 Part #: IMO 219 Part #: IMO 220 Part #: IMO 221
Part #: IMO 225 Part #: IMO 226 Part #: IMO 227 Part #: IMO 228
or piping).
Part #: IMO 233 Part #: IMO 234 Part #: IMO 235 Part #: IMO 236
13
www.markserv.com
and as part of the IMO your fire control plan. outdoor grade semi-rigid
Required Fire Plan. plastic signs or in MS-900
• If verbiage (English/other) Photoluminescent self-
• Clearly identify fire control or custom signage is adhesive labels.
equipment in the event of needed, please contact an
a total loss of light. MSI sales representative.
|
mop@markserv.com
Fire Control Plan Push Button for Area Protected Halon Horn High Expansion Closing Appliance Foam Nozzle
Part #: IMO 300 Fire Alarm by Halon Part #: IMO 311 Foam Supply for Exterior Part #: IMO 317
Part #: IMO 301 Part #: IMO 310 Part #: IMO 312 Part #: IMO 316
Sprinkler Horn Fire Alarm Bell Space Protected Foam Valve Manually Emergency Bilge Bilge Pump
Part #: IMO 302 Part #: IMO 303 by Foam Part #: IMO 319 Operated Call Pump Part #: IMO 322
Part #: IMO 318 Point Part #: IMO 321
Part #: IMO 320
A Class Fire Door A Class Fire Door Water Fog Remote Gas Detector Section Valves Fire Station
Self-Closing Part #: IMO 305 Applicator Controlled Part #: IMO 325 Drenching Part #: IMO 327
Part #: IMO 304 Part #: IMO 323 Skylights Part #: IMO 326
Part #: IMO 324
Area Protected CO2 Horn Locker with B Class Door B Class Door Fire Axe Control Station
All Fire Control Equipment Signs by CO2 Part #: IMO 307 Fire Equipment Self-Closing Part #: IMO 330 Part #: IMO 331 Part #: IMO 332
Part #: IMO 306 Part #: IMO 328 Part #: IMO 329
are 150mm (6") square
www.markserv.com
and as part of the IMO your fire control plan. outdoor grade semi-rigid
indoor usage and mounting location (i.e. flat surface, handrail Required Fire Plan. plastic signs or in MS-900
or piping). • If verbiage (English/other) Photoluminescent self-
• Clearly identify fire control or custom signage is adhesive labels.
equipment in the event of needed, please contact an
a total loss of light. MSI sales representative.
|
mop@markserv.com
A Class Fire Door Smoke Detector A Class Fire Door Portable Foam Remote Powder Handgun Foam Release Remote Area Protecting Secondary Means
Part #: IMO 338 Part #: IMO 339 Self-Closing Applicator Ventilation Part #: IMO 363 Station Controlled Fire by Drenching of Escape
Part #: IMO 340 Part #: IMO 341 Shut Off Part #: IMO 364 Pumps System Part #: IMO 367
Part #: IMO 342 Part #: IMO 365 Part #: IMO 366
Main Vertical Foam Monitor Foam Installation Area Sprinkler Powder A Class Division B Class Division Wheeled Fire Wheeled Fire Portable Fire
Part #: IMO 343 Gun Part #: IMO 345 Protected Installation Part #: IMO 368 Part #: IMO 369 Extinguisher Extinguisher Extinguisher
Part #: IMO 344 Part #: IMO 346 Part #: IMO 347 Part #: IMO 370 Part #: IMO 371 Part #: IMO 373
CO2/Nitrogen Emergency Halon 1301 Powder Release Water Monitor Portable Fire Portable Fire Portable Fire Portable Fire B Class Fire Door
Bulk Installation Switchboard Battery Station Gun Extinguisher Extinguisher Extinguisher Extinguisher Self-Closing
Part #: IMO 348 Part #: IMO 349 Part #: IMO 350 Part #: IMO 351 Part #: IMO 352 Part #: IMO 374 Part #: IMO 375 Part #: IMO 376 Part #: IMO 377 Part #: IMO 378
CO2 Battery Emergency Tel Fire Main with Locker with Sprinkler Halon 1301 Halon Release International Space Protected Sprinkler Horn
Part #: IMO 353 Station Fire Valves Protective Installation Bottles Placed In Station Shore Connection by Fire Alarm Part #: IMO 383
Part #: IMO 354 Part #: IMO 355 Clothing Part #: IMO 357 Protected Area Part #: IMO 380 Part #: IMO 381 Part #: IMO 382
Part #: IMO 356 Part #: IMO 379
Locker With Hose Box with Powder Hose and Heat Detector Flame Detector Sprinkler Section Fire Alarm Panel B Class Fire Door Drenching Primary Means
Breathing Spray Set Handgun Part #: IMO 361 Part #: IMO 362 Part #: IMO 384 Part #: IMO 385 Part #: IMO 386 Installation of Escape
Apparatus Part #: IMO 359 Part #: IMO 360 Part #: IMO 387 Part #: IMO 388
Part #: IMO 358
17
www.markserv.com
dangers. semi-rigid plastic signs
or in MS-900 self-
• Symbol signs quickly adhesive labels.
convey necessary warning
information on multi- • Available in
language project sites. Photoluminescent. Fire Hydrant Deluge CO2 Deluge Fire Alarm
Part #: F009 Part #: F010 Part #: F011 Part #: F012
• If verbiage (English/other)
or custom signage is
needed, please contact an
|
MSI sales representative.
mop@markserv.com
Fire Axe Foam Monitor Water Monitor Powder Monitor
Part #: F013 Part #: F014 Part #: F015 Part #: F016
Fire Extinguisher Fire Ladder Numbers 1-200 Dry Powder Release Halon Deluge Mobile Powder
Part #: F003 Part #: F004 Part #: F021 Part #: F022 Release Part #: F024
Add the desired number Part #: F023
to the part number. F021-1
for example shown.
Start Fire Pump Fire Hose Mobile Foam Mobile BCF Mobile CO2 Dual Purpose
Part #: F005 Part #: F006
All Fire Fighting signs are Part #: F025 Part #: F026 Part #: F027 Nozzle Water
Part #: F028
150mm (6") square
or piping).
Fire Breathing Fire Bucket AFFF Straight Arrow Angled Arrow
Apparatus Set Part #: F008 Part #: F030 Part #: F031 Part #: F032
Part #: F007
19
www.markserv.com
plastic signs or in MS-900
• Advise contractors, self-adhesive labels.
operators and mainte-
nance personnel of • If verbiage (English/other)
safety equipment to be or custom signage is
Maintain Good Wear Overalls and Clean Spills Work Permit Report Injuries Use Tie Tools
worn in work areas. needed, please contact an Housekeeping Boots Part #: M018 Required Part #: M020 Part #: M021
MSI sales representative. Part #: M016 Part #: M017 Part #: M019
• Ideal use for multi-
lingual work sites
|
mop@markserv.com
Use Lifevest Close Door Tie Loads Down Use Table Saw Fasten Seatbelts Wear Apron
Part #: M022 Part #: M023 Part #: M024 Part #: M025 Part #: M026 and Gloves
Part #: M027
Wear Faceshield Use SCBA Wear Overalls Wear Hard Hat Unplug Electricity Tool Box Meeting Use Stop Test Atmosphere Watch Read
Part #: M001 Part #: M002 Part #: M003 Part #: M028 Part #: M029 Part #: M030 Part #: M031 Part #: M032 Part #: M033
Use Bleed Down Wear Boots Wear Hard Hat & Use Isolation Mat Use Dustmask Use Welding Place Watchman Use Crane Signals Wear Hard Hat, Glasses
Part #: M004 Part #: M005 Safety Glasses Part #: M034 Part #: M035 Equipment Part #: M037 Part #: M038 & Ear Protection
Part #: M006 Part #: M036 Part #: M039
Wear Haircap Wear Goggles Wear Ear Wear Hard Hat & Handicap Use Tag Lines Wear Ear Protection Wear Glasses Wear Respirator
Part #: M007 Part #: M008 Protection Ear Protection Part #: M041 Part #: M042 & Glasses Part #: M044 Part #: M045
Part #: M009 Part #: M040 Part #: M043
or piping).
Tie Gas Cylinders Use Lock Out Use Handrails Get Pass Wear ID Badge Use Work Vest Use Scaffolding Use Horn Think, Start,
For visual uniformity use Part #: M013 Part #: M014 Part #: M015 Part #: M052 Part #: M053 Part #: M054 Part #: M055 Part #: M056 Focus
sign display boards on page 42. Part #: M096
21
International Safety –
Mandatory Signs
www.markserv.com
Part #: M083
Size: 100 x 300mm
4" x 12"
Part #: M057 Part #: M058 Part #: M059 Part #: M060 Part #: M061
Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm
12" x 8.5" 12" x 8.5" 12" x 8.5" 12" x 8.5" 12" x 8.5"
|
mop@markserv.com
Part #: M084
Size: 100 x 300mm
4" x 12"
Part #: M062 Part #: M063 Part #: M064 Part #: M065 Part #: M066
Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm
12" x 8.5" 12" x 8.5" 12" x 8.5" 12" x 8.5" 12" x 8.5"
Part #: M085
Size: 100 x 300mm
4" x 12"
Part #: M067 Part #: M068 Part #: M069 Part #: M070 Part #: M071
Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 215mm
12" x 8.5" 12" x 8.5" 12" x 8.5" 12" x 8.5" 12" x 8.5"
Part #: M086
Size: 100 x 300mm
4" x 12" Part #: M072 Part #: M073 Part #: M074 Part #: M075 Part #: M076
Size: 300 x 255mm Size: 300 x 255mm Size: 300 x 255mm Size: 300 x 255mm Size: 300 x 255mm
12" x 10" 12" x 10" 12" x 10" 12" x 10" 12" x 10"
Part #: M087
Size: 100 x 300mm Part #: M077 Part #: M078 Part #: M079 Part #: M080 Part #: M081
4" x 12" Size: 300 x 255mm Size: 300 x 255mm Size: 300 x 215mm Size: 300 x 215mm Size: 300 x 255mm
12" x 10" 12" x 10" 12" x 8.5" 12" x 8.5" 12" x 10"
or piping).
Part #: M088 Part #: M082
Size: 100 x 300mm Size: 300 x 300mm
4" x 12" 12" x 12"
23
Prohibition Pictograms
www.markserv.com
the facilities. plastic signs or in MS-900
self-adhesive labels.
• Clear messages for
multi-lingual work sites.
• If verbiage (English/other)
or custom signage is
• Advise of
prohibited behavior. needed, please contact an
No Dirty Boots No Dirty Suits Do Not Wash Do Not Lift Do Not Dump
MSI sales representative. Part #: P011 or Boots with Water Heavy Load Garbage into the Sea
Part #: P012 Part #: P013 Part #: P014 Part #: P015
|
mop@markserv.com
Restricted Access Do Not Make Noise No Alcohol Do Not Work with Do Not Go Near No Practical Jokes No Matches/Lighter
Part #: P001 Part #: P002 Part #: P016 Injured Hand Tail Rotor Part #: P019 Part #: P020
Part #: P017 Part #: P018
No Running Do Not Drink No Guns Do Not Dump Oil in Do Not Dump Oil Do Not Dump Do Not Climb
Part #: P005 Part #: P006 Part #: P026 the Sea on Land Garbage on Land on Forklift
Part #: P027 Part #: P028 Part #: P029 Part #: P030
or piping).
Do Not Roll No Dirty Suits No Forklifts No Sharp Objects No Food Or Drink No Radios No Goods
Gas Cylinder Part #: P010 Part #: P036 Part #: P037 Part #: P038 Part #: P039 Part #: P040
Part #: P009
25
www.markserv.com
eye wash stations plastic or MS-900
and safety showers. self-adhesive vinyl.
• Advise personnel of • If verbiage (English/other)
safe work requirements. or custom signage is
needed, please contact an
Exit Right Exit Left Stretcher Emergency Radio Break Glass to Open
MSI sales representative. Part #: SC011 Part #: SC012 Part #: SC013 Part #: SC014 Part #: SC015
|
mop@markserv.com
First Aid Station Muster Station Scramble Net Muster Station Emergency Shower Emergency Stop Eye Wash
Part #: SC001 Part #: SC002 Part #: SC016 (No Suits) Part #: SC018 Part #: SC019 Part #: SC020
Part #: SC017
General Alarm First Aid Station Telephone Smoke Hood Valve Shut Off Ladder Smoking Permitted
Part #: SC003 with Text Part #: SC021 Part #: SC022 Part #: SC023 Part #: SC024 Part #: SC025
Part #: SC004
Emergency Shower Helicopter Rechargeable Torch Emergency Ladder Call Point Crescent Knotted Rope
Eye Wash Part #: SC006 Part #: SC026 Part #: SC027 Part #: SC028 Part #: SC029 Part #: SC030
Part #: SC005
or piping).
First Aiders Name/Location Angled Arrow Stairs up Stairs Down Rescue Hook (LV) Rescue Hook (HV)
Part #: SC009 Part #: SC010 Part #: SC036 Part #: SC037 Part #: SC038 Part #: SC039 Part #: SC040
27
Warning Signs
www.markserv.com
plastic signs or in MS-900
• Symbols quickly convey self-adhesive labels.
warning information on
multi-language project sites.
• If verbiage (English/other) Scorpions Welding High Noise High Pressure Rotating Drill Fall Overboard
or custom signage is needed, Part #: W019 Part #: W020 Part #: W021 Part #: W022 Part #: W023 Part #: W024
contact an MSI sales rep.
|
mop@markserv.com
Biohazard High Voltage Slippery Floor Offshore Crane Pressurized Tanks High Pressure Beware of Wire Rope Freeze Area
Part #: W001 Part #: W002 Part #: W003 Part #: W025 Part #: W026 Hose Tail Rotor in Tension Part #: W030
Part #: W027 Part #: W028 Part #: W029
Falling Objects Pinch Points Risk Radioactive Uneven Surfaces Wet Paint Dust Mask Methanol Mind the
Part #: W004 Part #: W005 Part #: W006 Part #: W031 Part #: W032 Part #: W033 (Asbestos) Part #: W035 Lift Doors
Part #: W034 Part #: W036
Open Door Slowly Chemicals Deck Opening Hearing Non Ionizing Oxidizing Agent Nails in Pallets High Winds Land Rig Crane
Part #: W007 Part #: W008 Part #: W009 Protection Radiation Part #: W039 Part #: W040 Part #: W041 Part #: W042
Part #: W037 Part #: W038
Explosive Falling Boxes Falling Man Third Party Poisonous Fish Snakes High Pressure Buried Power Loads Overhead
Part #: W010 Part #: W011 Part #: W012 Part #: W043 Part #: W044 Part #: W045 Wash Cables Part #: W049
Part #: W046 Part #: W047
Flammable Flying Objects Forklift Hot Coffee/Liquid Moving/Rotating Stepping Hazard Area Protected Area Protected Toxic Gas
Part #: W013 Part #: W014 Part #: W015 Part #: W050 Load Part #: W053 by CO2 by Halon Part #: W056
T o or d e r Specify the part number and quantity; outdoor or Part #: W051 Part #: W054 Part #: W055
or piping).
For visual uniformity use
sign display boards on page 42.
Hot Surface Hot Liquid Heavy Duty Toxic H2S Gas Confined Area Mov Tubular Remote Operated Back Injury
Part #: W016 Part #: W017 Forklift Part #: W057 Part #: W058 Part #: W059 Machinery Part #: W061
Part #: W018 Part #: W060
29
Operation Signs T o or d e r Specify the part number and quantity. Safety Sign Review Display
Part #: OP917
www.markserv.com
• Identifies all pertinent pictograms
(safety, regulatory, etc.) by type
to familiarize crew members with
all safety signs used on board the
vessel
|
mop@markserv.com
T-Card Cabinet Muster Board
Part #: 0P904
•T
-Cards are enclosed in water-
tight fiberglass lightweight box
Please provide:
• Facility name
• Pictograms needed
• Company logo
Rig Safety and
Environmental Performance
Part #: OP950
•D
isplay board showing rig
performance measured in days
T-Card Cabinet H2S
Muster Display • Please provide:
To order additional T-Cards: Part #: OP907 Facility name and company logo
Specify, name, quantity and color.
• Identifies designated H2S • Sliders
Part #: OP90TC
muster stations
Size: 810mm x 1270mm (32" x 50")
31
www.markserv.com
|
mop@markserv.com
Crane Signal Display
Part #: OP903
• P
ictograms representing all
hand signals and respective
crane signals used to ensure
safe operations and complete
understanding
Please provide:
• Facility name
• Company logo
• Sliders
Please provide:
• Facility name
• Company logo
33
Operation Signs T o or d e r Specify part number, quantity and provide a Station Bill
Part #: SP894
www.markserv.com
CAD drawing.
Sized per each vessel
•D
isplay emergency
procedures, directions
and assignment for
vessel
|
mop@markserv.com
Life Saving Plan
Part #: SP891
•D
isplay of location-specific
safety, life saving equipment
Muster List
Part #: SP892
•D
isplays vessel emergency
info with inserted diagrams
(customer formats to include
AutoCad, models, etc.) showing
pertinent escape routes
35
Operation Signs T o or d e r Specify part number and quantity. Permit To Work Board
Part #: OP906
www.markserv.com
• Displays ongoing permitted work
in progress by location
Please provide:
• Company logo
• Facility profile/layout in CAD
|
Size: 860mm x 1270mm
mop@markserv.com
(34" x 50")
Operation Signs T o or d e r Specify part number and quantity. Responsible Person Display
Part #: OP918
www.markserv.com
• Identifies assigned personnel to
positions by name and title
Please provide:
Management Team Board • Company logo
Part #: OP924 • Names & positions
|
mop@markserv.com
• Includes slide-ins for applicable names
Please provide:
• Company logo
• Names & positions
Committee Board
Part #: OP915
Key Personnel Board
Part #: OP911 • Displays committee members
Please provide:
• Company logo
• Names & positions
Operation Signs
Sign Display (IMO-2 Squares)
• Displays 2 square pictograms or
T o or d e r Specify part number and quantity.
www.markserv.com
signs (150mm x 150mm)
Size: 8" x 25" (200 x 640mm)
Part #: MSI-OP928
|
mop@markserv.com
Safety Chart
Part #: OP922
•D
isplay board manufactured in four
455mm x 620mm (18" x 24.5")
sections
Please provide:
• Company logo
Safety
Communications Board
Part #: OP913
•D
isplays Safety information as
well as information pertinent to
ongoing activities
Please provide:
• Company logo Life Raft Launch Display Lifecraft Launch Instructions
• Headers for board Part #: OP940 Part #: OP939
Size: 1090mm x 810mm (32" x 43") Please provide: Size: 355mm x 406mm (14" x 16")
• Company logo
• Facility Name
www.markserv.com
|
mop@markserv.com
Tubular Inventory
Part #: OP927
Well Location Board •D
isplays information on all tubular
Part #: OP916 stock onboard the vessel
• Displays well information required by US Coast Guard • Dry erase board
• Information to include vessel name, operator, location Please provide:
(block) number, and OSCG number • Company logo
• Sized per Coast Guard regulations Size: 40" x 34"
• Includes slide-ins
Please provide:
• Company logo
• Vessel name, operator, location numbers and USCG number
Please provide:
• Company logo
•D
isplays information for current
risers onboard the vessel, either
installed or on deck.
Noise at Work Regulations Risk Assessment
• Dry erase board Part #: OP933 Part #: OP935
Please provide: •S
ummary of obligations regarding •S
ummary of steps for assesing
• Company logo regulations for noise at work risk for both the employer and
the employee
Size: 34" x 38" Size: 24" x 17"
Size: 24" x 17"
43
www.markserv.com
Sign Display Boards can be customized to fit as many signs
T W O
as needed (i.e. 9 signs, 12 signs, etc.).
S ET
ONE
|
mop@markserv.com
S ET
Set 2: MARSEC Signs
Part #: MAR002
Size: 12" x 12" (holder)
8" x 10" (signs)
Restricted Area
This item also sold
separately as:
Part #: MAR004
Size: 3" x 8"
Security Notice
This item also sold separately as: MARSEC Signage
Set 1: MARSEC Set Part #: MAR005
Part #: MAR001 Size: 8.5" x 10" Signage required by USCG & ISPS to identify change in
security levels corresponding with Homeland Security
for Maritime applications.
T H REE
Size: 640mm x 200mm (25" x 8") Size: 640mm x 530mm (25" x 21") (levels 1-3)
(1) MS215F Security Notice Sign
with Adhesive back
Sign Display Boards (4) MS900 Restricted Area Labels
S ET
Set 3: Security Notice Board
Part #: MAR003
www.markserv.com
|
mop@markserv.com
Electric Shock Management of Health and Manual Handling Operations Know Your Fire Know Your Safety Signs
Emergency Resuscitation Safety at Work Regulations Regulations 1992 Extinguisher Color Code Part #: OP952
Part #: OP936 Part #: OP942 Part #: OP943 Part #: OP947 Size: 600mm x 425mm
Size: 600mm x 425mm Size: 600mm x 425mm Size: 600mm x 425mm Size: 600mm x 425mm (24" x 17")
(24" x 17") (24" x 17") (24" x 17") (24" x 17")
Provision and use of Work The Workplace Health and Safety Know Your Hazardous Substances
Equipment Regulations 1998 Regulations 1992 Regulations of 1992 Dangerous Substances & General Signs
Part #: OP944 Part #: OP945 Part #: OP946 Part #: OP951 Part #: OP953
Size: 600mm x 425mm Size: 600mm x 425mm Size: 600mm x 425mm Size: 600mm x 425mm Size: 600mm x 425mm
(24" x 17") (24" x 17") (24" x 17") (24" x 17") (24" x 17")
47
www.markserv.com
Stainless Steel
Swag Sleeves
|
mop@markserv.com
• 100 per bag
To Order:
Specify tag size, quantity, wording and whether you need
rigid or flexible.
Type 316 Stainless Steel Tags
To Order:
Specify wording, size, rigid or flexible, and quantity.
Turnkey Installation
www.markserv.com
Marking Services, Inc (MSI) is a turnkey
|
MSI i n s t a ll a t i o n t e a ms :
mop@markserv.com
contractor who has developed a unique