Professional Documents
Culture Documents
Mechanical Specification
(Unit: mm , tolerance ± 0.5mm)
2/1
35
Technical Features
• Switching Power Supply
24V DC 1.5A 2 1
• For max 2 MB blinds
or 1 blind with external motor
• DIN rail mounting
• 2 modules
SL2711
General Switching Power Supply
45.15
PINS
90
www.pellini.net
1 +V 3 AC/L
Pellini S.p.A. - 26845 Codogno (LO) ITALY • via Fusari, 19 • Ph. +39 0377 466411 • F. +39 0377 436001 - 437635 • info@pellini.net
ScreenLine Benelux | ScreenLine BR | ScreenLine CZ | ScreenLine France | ScreenLine GmbH | ScreenLine Nordic 2 | ScreenLine 4 | ScreenLine
-VUK | ScreenLine Africa AC/NIndia
9/2020
SL2711 Switching Power Supply 24V DC 1.5A
SPECIFICATION
OUTPUT
DC VOLTAGE 24V
RATED CURRENT 1.5A
CURRENT RANGE 0 ~ 1.5A
RATED POWER 36W
RIPPLE & NOISE (max.) Note.2 150mVp-p
VOLTAGE ADJ. RANGE 21.6 ~ 29V
VOLTAGE TOLERANCE Note.3 ±1.0%
LINE REGULATION ±1.0%
LOAD REGULATION ±1.0%
HOLD UP TIME (Typ.) 30ms/230VAC 12ms/115VAC at full load
INPUT
VOLTAGE RANGE 85 ~ 264VAC (277VAC operational ) 120 ~ 370VDC (390VDC operational )
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 89%
AC CURRENT (Typ.) 0.88A/115VAC 0.48A/230VAC
INRUSH CURRENT (Typ.) COLD START 25A/115VAC 45A/230VAC
PROTECTION
105 ~ 160% rated output power
OVERLOAD Note.4
Protection type : Constant current limiting, recovers automatically after fault condition is removed
30 ~ 36V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT
WORKING TEMP. -30 ~ +70° (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85°, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT ±0.03%/°C (0 ~ 50°C) RH non-condensing
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
OPERATING ALTITUDE 2000 meters
OVER VOLTAGE CATEGORY Ⅲ; According to EN61558, EN50178,EN60664-1, EN62477-1; altitude up to 2000 meters
NOTES
1. All parameters NOT specially mentioned are measured at 230 VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20 MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 µf & 47µf parallel capacitor.
3. Tolerance: includes set-up tolerance, line regulation and load regulation.
4. Constant current limiting operation within 50% ~ 100% rated output voltage; protection type for short circuit is hiccup mode, it will recover automatically after gault condition is removed.
5. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with EMC directives.
pellinindustrie ®
www.pellini.net
Pellini S.p.A. - 26845 Codogno (LO) ITALY • via Fusari, 19 • Ph. +39 0377 466411 • F. +39 0377 436001 - 437635 • info@pellini.net
ScreenLine Benelux | ScreenLine BR | ScreenLine CZ | ScreenLine France | ScreenLine GmbH | ScreenLine Nordic | ScreenLine UK | ScreenLine Africa | ScreenLine India
9/2020