Professional Documents
Culture Documents
MDP EVAP Effect 1E Navis Model - Settings Manual
MDP EVAP Effect 1E Navis Model - Settings Manual
Contents
1 Scope of the Manual ........................................................................................................................ 1
2 Using the Insulation Navismodel ..................................................................................................... 2
3 Using the Settings file ...................................................................................................................... 5
4 Restoring Normal Settings to Navisworks ....................................................................................... 6
This manual contains the instructions to use the insulation information in the Navismodel MdP EVAP
Effect 1E Navis Model - INSU.nwd and the settings file MdP EVAP Effect 1E Navis Model -
Settings.xml.
Please note that this manual is only for the specified Navismodel and will not universally work on all
Navismodels sent by ANDRTIZ.
Page: 2 (total 7)
1. Open the Navisworks menu via the Navisworks symbol in the left corner of the program.
8. Click Open.
Page: 5 (total 7)
3. Select Properties.
The insulation properties can be seen by moving the mouse on top of the pipe or equipment.
Page: 6 (total 7)
1. Open the Navisworks menu via the Navisworks symbol in the left corner of the program.
7. Select Defaults.