Professional Documents
Culture Documents
(1137)
(1090)
A A
(865,8)
(759,3)
(677,3)
B (640)
(615)
B (543,6) B
B
(427,3)
2
(327) A
(302)
B
(197,3) B
(156,8)
C 3 C
0
10
B B
(12
0 Flooring level A(1:2) B(1:2)
) Note 1:
(1 4 General Notes: See AW001_
03
) Note 2:
Unspecified tolerances:
- for linear dimensions: 2 mm
- for angular dimensions: 1
(62,2)
2
(300,1)
(1047,7)
AW990140001 B
Title: LG 446W4273P008 with BF 450W7948P001 Type A
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 300x1137x1048 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Update of pos. 1,2; change from ass. to pack. for pos.3,4,10,13,14,15; views re-arrangement 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
(1137)
(1090)
A B(1:1) A
A(1:1)
A B 16
(865,8)
2
10
10 16
13
7
D(1:2)
B C
677,3 3x
C(2:1)
13
13
8 19 13
15
13
B B
3
4
427,3
18 10
6 11 20
3
Note 1:
197,3 4
General Notes: See AW001_
3 Note 2:
4 Unspecified tolerances:
- for linear dimensions: 2 mm
- for angular dimensions: 1
1 1 AW990140030 Ladder gate subassembly 6,9 kg
0 2 1 AW990140034 Foldable gate assembly 2,4 kg
C 3 3 AW990140050 Hinge assembly 1 0,4 kg C
B 4 3 AW990140061 Hinge clamp assembly I 0,1 kg
10
)
(2 1 Flooring level 5
6
6
1
AW990140082
AW990140099
Thread protection I
Railing removable knob
Hard rubber/plastic
EN 1.4547
Default 0 kg
VTT.50-p-M10x25-LP 0,2 kg
7 2 AW990140236 Sleeve PTFE Tube 13x1.25mm 0 kg
8 1 EN ISO 7042 - M5 A4-80 0 kg
D E(1:1) 9 6 EN ISO 7042 - M6 A4-80 0 kg
6x F ( 1: 2 ) B 10 8 EN ISO 7042 - M10 A4-80 0 kg
D B Draw.no.: Rev.no.: D
AW990140008 B
Title:
N sbyvej 26 - DK-5000 Odense C Ladder Gate 446W4273P008
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 202x907x1137 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Pos. 3 update; chagne of ISO7380 M6x20 to M6x16 (pos.5; views A,B) 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A A
3 1
(937)
B B
A
(863,1) (123) Note 1:
General Notes: See AW001_
Note 2:
C C
Unspecified tolerances:
- for linear dimensions: 2 mm 2
- for angular dimensions: 1
4
A-A ( 1 : 2 ) B-B ( 1 : 2 ) 1 2 AW990022009 Rubber stopper EPDM rubber 50x30 Rubber Block 0,1 kg
2x 2 1 AW990022014 Rubber stopper EPDM rubber 50x30 Rubber Block 0,1 kg
4 3 1 AW990140031 Ladder gate welded subassembly 6,7 kg
5 4 6 Exko M6x5 Nylon-6/6 0 kg
5 B 5 6 ISO 7380-1 - M6 x 16 A4-70 0 kg
Pos Qty Drawing No. Title Material Source item Mass
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
kyd 9/20/2022 won A3 1 : 10 Metric / mm. 6.9 kg
B Draw.no.: Rev.no.:
B
5 AW990140030 B
D 5 1 Title: Ladder gate subassembly D
N sbyvej 26 - DK-5000 Odense C
2 4 Phone: +45 63 12 88 77
4 Dimensions: Sheet no.:
drawings@aluwind.com 937x863x123 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
245,5 G
E B Pos. 5 update; add. of pos.11; main view weld. update; weld. update on views C,D,E,H,I,J,K; add. of views L,M,N,O,P on sheet 2 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
B
D F
C (937)
B(1:2) C-C ( 1 : 2 )
+
(869,8) 12 - 20 a3
A a3 B A
D E
C F
(49,2)
0,1 A
723,8 1 A 4 7
240
158
7
J
0,5
H H
10
(541,8) D-D ( 1 : 2 ) a3
8
a3 B 3
a3 438,8 E-E ( 1 : 2 ) 11
K
a3 6
B B
a2
B x2
I I
A A a3 a3 B 2
B 9
B
5
B
F-F ( 1 : 2 )
0 G(1:2) 1
(682)
+
38,3 1 12 - 20 9
4 1
L 67,5 1
B 0,1 B
(108,5)
B
C x2 x2 Note 1: C
General Notes: See AW001_
s2 s2
Note 2:
A-A ( 1 : 5 ) Unspecified tolerances:
- for linear dimensions: 2 mm
(847,3) - for angular dimensions: 1
1 1 AW990113017 Stop plate EN AW-5083 H111 PL. 5 mm 0 kg
2 1 AW990113018 Stop plate II EN AW-5754 H111 PL. 5 mm 0 kg
3 1 AW990140015 Intermediate gate tube EN AW-6060 T6 Tube 42x5mm 1 kg
4 1 AW990140032 Gate tube EN AW-6060 T6 Tube 42x5mm 3,6 kg
5 1 AW990140033 Kickplate EN AW-5754 H111 PL. 5 mm 1,7 kg
B 6 1 AW990140088 Rotational joint eye III EN AW-5083 H111 PL. 5 mm 0 kg
H-H ( 1 : 2 ) I-I ( 1 : 2 ) J(1:2) K(1:2) B 7 2 AW990140089 Rotational joint eye IV EN AW-5083 H111 PL. 5 mm 0 kg
B 8 1 AW990140090 Mounting bracket assembly 0,1 kg
B a3
54 1
9 2 AW990140094 Railing support rib EN AW-5083 H111 PL. 5 mm 0 kg
10 1 AW990140098 Rotational joint eye III EN AW-5083 H111 PL. 5 mm 0 kg
a3 a3 11 1 AW990140114 Spring fixation eye for gate EN AW-6082 T6 PL. 10 mm 0 kg
Pos Qty Drawing No. Title Material Source item Mass
B Drawn by:
won
Revision Date: Checked by: Format: Scale: Unit: Weight:
9/20/2022 won A2 1:5 Metric / mm. 6.7 kg
D Draw.no.: Rev.no.: D
a3
B a3 AW990140031 B
1
22,5
1 2 3 4 5 6
1 2 3 4 5 6
A
B A
L(1:5)
O O B B
M(1:2) N(1:1)
2x
249 1
1
16
a3
B N B
(270) s4
s4
M
B
P(1:2)
C C
B
O-O ( 1 : 5 )
Eye orientation
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 9/20/2022 won A2 1:5 Metric / mm. 6.7 kg
D Draw.no.: Rev.no.: D
AW990140031 B
Title: Ladder gate welded subassembly
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 937x109x847 2/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
(682) A-A ( 1 : 1 )
A A
A ( 42)
)
(45
(5)
B B
640
Note 1:
C General Notes: See AW001_ C
Note 2:
Unspecified tolerances:
( 42)
- for linear dimensions: 1 mm
- for angular dimensions: 1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-6060 T6 Tube 42x5mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 1/21/2022 won 1:1 Metric / mm. 1.0 kg
Draw.no.: Rev.no.:
AW990140015 A
D N sbyvej 26 - DK-5000 Odense C Title: Intermediate gate tube D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 42x682x42 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
R85
B B B-B ( 1 : 1 )
(865,8)
844,8
B B
(5)
( 42)
Note 1:
C General Notes: See AW001_ C
Note 2:
Unspecified tolerances:
682 - for linear dimensions: 1 mm
- for angular dimensions: 1
(724) Note 3:
De-burr sharp edges.
( 42)
AW990140032 A
D N sbyvej 26 - DK-5000 Odense C Title:
Gate tube D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 42x724x865.8 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(5) 75
B Note 1: B
General Notes: See AW001_
Note 2:
(26)
50
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
12
Note 3:
All unspecified radii: R2
12 Note 4:
C 2x 8,5 +- 0,5
0
C
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5083 H111 PL. 5 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
lup 11/10/2021 won 1:1 Metric / mm. 0.05 kg
Draw.no.: Rev.no.:
AW990113017 A
Title:
N sbyvej 26 - DK-5000 Odense C Stop plate
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 5x50x75 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Dimension change from 25.4 to 20mm; views update; flat pattern update 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A A
E
(54,3)
1
B-B ( 1 : 5 )
40
B C(1:2)
R2
E B R10
R2 B
D (5) R10
C
821,4 1
20
(847,3) 7 R10
A(1:2)
B B
2x 8,5 +- 0,5
140
0
32
A58 100,4
AW990140033 B
D N sbyvej 26 - DK-5000 Odense C Title:
Kickplate D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 847.3x140x54.3 1/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
FLAT PATTERN ( 1 : 5 )
(878,5)
B UP 30 R10 (5) B
DOWN 90 R10
(140)
(34,4)
(29,1)
C C
AW990140033 B
D N sbyvej 26 - DK-5000 Odense C Title:
Kickplate D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 847.3x140x54.3 2/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
32 +- 0,5
0 A-A ( 1 : 1 )
A
(5)
13 +- 0,5
0
B B
(56,2)
40,2 B(2:1) Note 1:
2x General Notes: See AW001_
Note 2:
Unspecified tolerances:
26
- for linear dimensions: 0.5 mm
B - for angular dimensions: 1
14,5
3,6
R21 Note 3:
C C
De-burr sharp edges.
A Material: Drawing format: Source item:
EN AW-5083 H111 PL. 5 mm
A4
37,5 Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/28/2022 won 1:1 Metric / mm. 0.02 kg
8 Draw.no.: Rev.no.:
AW990140089 A
Title: Rotational joint eye IV
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 56.2x37.5x5 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(48,2) (144)
A
1
(114,2)
B B
2
B
A(2:1)
(50 B(2:1)
s3 )
2
(3)
(50
)
C Note 1: C
s3 General Notes: See AW001_
(3)
Note 2:
Unspecified tolerances:
- for linear dimensions: 1 mm
- for angular dimensions: 1
1 1 AW990140091 Mounting bracket EN AW-5083 H111 PL. 4 mm 0,1 kg
2 2 AW990140060 Mounting bracket endplate EN AW-5083 H111 PL. 4 mm 0 kg
Pos Qty Drawing No. Title Material Source item Mass
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 4/13/2022 won A3 1:2 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140090 A
D N sbyvej 26 - DK-5000 Odense C Title: Mounting bracket assembly D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 48x144x114 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(4)
(R6)
1
110,2
Note 3.
B B
A
140 1
A(2:1)
2x
Note 1:
43
50
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
C 3 C
Note 3:
Marked edges to be rounded: R2 +2/-0
Note 4:
De-burr sharp edges.
FLAT PATTERN ( 1 : 2 ) Note 5:
All unspecified radii: R2
241,9 Material: Drawing format: Source item:
PL. 4 mm
(4) EN AW-5083 H111 A3
135,9 Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
DOWN 90 R6 won 4/13/2022 won 1:2 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140091 A
D N sbyvej 26 - DK-5000 Odense C Title: Mounting bracket D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 140x110,2x43 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
48,2
43
(4)
B B
4
170
(19,7)
18,8
Note 1:
R2 General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
86
0,9
- for angular dimensions: 1
C Note 3: C
De-burr sharp edges.
+
42 - 10 Material:
EN AW-5083 H111
Drawing format:
A4
Source item:
PL. 4 mm
AW990140060 A
Title: Mounting bracket endplate
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 4x19.7x48.2 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A (58) A
A
41,5
13 +- 0,5
0
A-A ( 2 : 1 )
33 +- 0,5
0
(40,7)
B B
)
24,2
( 42
)
(41
45
3
3 39
A
Note 1:
C General Notes: See AW001_ C
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5083 H111 PL. 5 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/28/2022 won 2:1 Metric / mm. 0.02 kg
Draw.no.: Rev.no.:
AW990140088 A
D N sbyvej 26 - DK-5000 Odense C Title: Rotational joint eye III D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 58x40.7x5 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
0,
3
( 5)
83
R21
41
30
,7
B B
(28,8)
21
45
83
0,3 24
R10
(33,9)
Note 1:
41 General Notes: See AW001_
C C
Note 2:
50,7 Unspecified tolerances:
- for linear dimensions: 0,5 mm
- for angular dimensions: 1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5083 H111 PL. 5 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 11/10/2021 won 2:1 Metric / mm. 0.01 kg
Draw.no.: Rev.no.:
AW990140094 A
D N sbyvej 26 - DK-5000 Odense C Title: Railing support rib D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 5x33.9x28.8 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(71)
11 +- 0,5
0
30 +- 0,5
0
) 13 +- 0,5
0
8
(3
(67,2)
52,2
B (1 B
09
)
33 +- 0,5
24,2
0
( 41
R20
12
)
39 2,5
10,8
(5) A 24 2
7 +- 0,5
0
A(2:1)
Note 1:
C General Notes: See AW001_ C
Note 2:
45
Unspecified tolerances:
- for linear dimensions: 0.5 mm
3 - for angular dimensions: 1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5083 H111 PL. 5 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/28/2022 won 1: 1 Metric / mm. 0.04 kg
Draw.no.: Rev.no.:
AW990140098 A
D N sbyvej 26 - DK-5000 Odense C Title: Rotational joint eye III D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 67.1x66.9x5 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
75
5 12
B Note 1: B
12
General Notes: See AW001_
30
Note 2:
Unspecified tolerances:
50
2x 8,5 +- 0,5
0 - for linear dimensions: 0.5 mm
- for angular dimensions: 1
25
Note 3:
12
All unspecified radii: R2
C Note 4: C
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5754 H111 PL. 5 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 12/20/2021 won 1:1 Metric / mm. 0.04 kg
Draw.no.: Rev.no.:
AW990113018 A
Title:
N sbyvej 26 - DK-5000 Odense C Stop plate II
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 5x50x75 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
30 +- 0,5
0
A-A ( 2 : 1 )
45
16 +- 0,5
0
R3
B + B
2 - 20
R3 R3
(47)
32
24
78
45
Note 1:
A 4 General Notes: See AW001_
C C
Note 2:
44
Unspecified tolerances:
(10)
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
24
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-6082 T6 PL. 10 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 9/20/2022 won 2:1 Metric / mm. 0.03 kg
Draw.no.: Rev.no.:
AW990140114 A
D N sbyvej 26 - DK-5000 Odense C Title: Spring fixation eye for gate D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 10x47x44 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
30
54
(2) (R2) 12 (R2)
B B
2 x M6x1
50
Note 1:
38
General Notes: See AW001_
Note 2:
12
Unspecified tolerances:
12
- for linear dimensions: 0,5 mm
16 (R2) (R2) - for angular dimensions: 1
C Note 3: C
De-burr sharp edges.
Material: Drawing format: Source item:
EPDM rubber 50x30 Rubber Block
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 10/12/2021 won 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990022009 A
Title:
N sbyvej 26 - DK-5000 Odense C Rubber stopper
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 30x54x50 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
30
64 (R2) (R2)
15
12
B B
Note 1:
2 x M6x1 General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
12
- for angular dimensions: 1
12 (R2) (R2) Note 3:
C De-burr sharp edges. C
16
Material: Drawing format: Source item:
EPDM rubber 50x30 Rubber Block
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/20/2022 won 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990022014 A
Title:
N sbyvej 26 - DK-5000 Odense C Rubber stopper
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 30x64x50 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Update of pos.9; change ISO7380 M6x20 to M6x12 (pos.16, view F) 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
D
A(1:1)
E C
B B
A A
(267)
B-B ( 2 : 1 )
(193)
A
4
8
E D
1
9
C
(678) 7
15
G
B B
F
(202)
C-C ( 1 : 1 )
( 20 )
13 5
3
16
F
E-E ( 1 : 1 )
D-D ( 1 : 1 ) 5
6
16
Note 1: 6
17
G(1:1)
General Notes: See AW001_
17 13 Note 2:
Unspecified tolerances:
- for linear dimensions: 2 mm
11
10 - for angular dimensions: 1
C C
1 1 AW990011035 M6 Washer DIN9021/ISO7093 PA 6,6 nylon Nylon 6/6 0 kg
11 2 1 AW990011064 M12 Washer DIN125 PA 6,6 nylon Nylon 6/6 0 kg
6
3 1 AW990014205 Edge protection self-clamping Rubber EMKA 1010-08 0 kg
4 1 AW990022004 Female damper EPDM 0 kg
5 1 AW990022012 Rubber stopper EPDM rubber 40x22 Rubber Block 0 kg
6 14
12 6 2 AW990022015 Vibration damping element EPDM DVA.4-40-20-SST-M8-23-55 0,1 kg
2
B 7 1 AW990022016 Rubber stopper EPDM rubber 50x30 Rubber Block 0,1 kg
8 1 AW990126105
B 9 1 AW990140035
Gate lock subassembly 1
Foldable gate welded subassembly
0,5 kg
1,6 kg
F-F ( 1 : 1 ) 10 1 AW990140086 Distancer Nylon 6/6 PL. 2 mm 0 kg
13 16
B 11 2 AW990140087 Distancer Nylon 6/6 PL. 3 mm 0 kg
12 1 EN ISO 7042 - M12 A4 0 kg
13 4 Exko M6x5 Nylon-6/6 0 kg
16 14 1 Exko M12x5 Nylon-6/6 0 kg
15 1 ISO 7380-1 - M6 x 12 A4-70 0 kg
13 16 4 ISO 7380-1 - M6 x 16 A4-70 0 kg
17 2 Rivet Nut M8 Rivet nut M8 clamp 5-7 A4 0 kg
7
B Pos Qty Drawing No.
Drawn by: Revision Date:
Title
Checked by:
Material
Format:
Source item
Scale:
Mass
Unit: Weight:
kyd 9/13/2022 won A2 1:4 Metric / mm. 2.4 kg
D Draw.no.: Rev.no.: D
AW990140034 B
Title: Foldable gate assembly
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 678x202x267 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Update of pos.3,4; welding update in views B,C,D,E 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
(621,5)
A A
A-A ( 1 : 2 )
A 2x B
B
B-B ( 1 : 2 )
2x a2
x2
x2 x2
B
(202)
(216,5)
E C
B B
C-C ( 1 : 2 )
D D
D-D ( 1 : 2 )
E C B a3
20
a3
F 77 a3
77
B
50
s2
B
(83,7)
F 18,5 0,5
E-E ( 1 : 2 )
a3
C F-F ( 1 : 2 ) C
B
50
Note 1:
General Notes: See AW001_
Note 2:
s2
1 18,5 Unspecified tolerances:
- for linear dimensions: 1 mm
- for angular dimensions: 1
1 1 AW990140036 Foldable gate tube I EN AW-6060 T6 Tube 42x5mm 1,2 kg
13,2 2 2 AW990140083 End plate EN AW-5754 H111 PL. 5 mm 0 kg
167
6
6 1 AW990140096 Mounting bracket assembly 0,2 kg
7 7 1 AW990140103 Bumper plate EN AW-5083 H111 PL. 5 mm 0,1 kg
a3
B Pos Qty Drawing No. Title Material Source item Mass
2
52
5 Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 9/13/2022 won A2 1:2 Metric / mm. 1.6 kg
D Draw.no.: Rev.no.: D
B 4
AW990140035 B
3 Title: Foldable gate welded subassembly
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 84x622x217 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
2 and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
A-A ( 1 : 1 )
(193)
( 42)
R85 A A
172
(5)
B B
500
(542)
Note 1:
C General Notes: See AW001_ C
Note 2:
( 42)
Unspecified tolerances:
- for linear dimensions: 1 mm
- for angular dimensions: 1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-6060 T6 Tube 42x5mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/25/2022 won 1:2 Metric / mm. 1.2 kg
Draw.no.: Rev.no.:
AW990140036 A
D N sbyvej 26 - DK-5000 Odense C Title: Foldable gate tube I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 42x542x193 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A-A ( 2 : 1 ) A
(5)
A
11 +- 0,5
0
B B
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
42 0,5
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
Note 3:
C C
A De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5754 H111 PL. 5 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 12/20/2021 won 2:1 Metric / mm. 0.02 kg
Draw.no.: Rev.no.:
AW990140083 A
Title:
N sbyvej 26 - DK-5000 Odense C End plate
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 5x42x42 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Dimension change from 15 to 20mm; views update; flat pattern update 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A (5) A
33 +- 0,5
0
13,5 +- 0,5
0
(6
2
)
(43)
(R5)
26,5
B B
1
20
1
B
5
64,5
Note 1:
C General Notes: See AW001_ C
Note 2:
Unspecified tolerances:
1
1 2 3 4 5 6
1 2 3 4 5 6
FLAT PATTERN ( 2 : 1 )
A A
B
(64,5)
(30,2) (5)
B B
DOWN 90 R5
(68,4)
C C
AW990140085 B
D N sbyvej 26 - DK-5000 Odense C Title: Rotation joint eye II D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 43x64.5x35 2/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
(205) 1
A (59,6) A
2
B
(153)
B B
1
B(2:1)
A(2:1)
) s3
( 50
)
(50
C Note 1: C
(3)
General Notes: See AW001_
Note 2:
s3 (3) Unspecified tolerances:
- for linear dimensions: 1 mm
- for angular dimensions: 1
1 2 AW990140060 Mounting bracket endplate EN AW-5083 H111 PL. 4 mm 0 kg
2 1 AW990140097 Mounting bracket EN AW-5083 H111 PL. 4 mm 0,2 kg
Pos Qty Drawing No. Title Material Source item Mass
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 4/26/2022 won A3 1:2 Metric / mm. 0.2 kg
Draw.no.: Rev.no.:
AW990140096 A
D N sbyvej 26 - DK-5000 Odense C Title: Mounting bracket assembly D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 60x205x153 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
52 1
A 21,5 15,5 +- 0,5
0 40
A A
(4)
149 2
3x 8,5 +- 0,5
0
(R6)
125,8 1 B
B
124
30
90
86
42
10
125
80
B-B ( 1 : 2 )
B 0 Note 3. B
C
A(1:1) 12
149 2
20 2
32
1
Note 1:
43
20
(R10) C(2:1)
4
2x Note 2:
Unspecified tolerances:
(R6) - for linear dimensions: 0.5 mm
14 - 20
+
- for angular dimensions: 1
C C
Note 3:
(201) Marked edges to be rounded: R2 +2/-0
50
Note 4:
3 De-burr sharp edges.
Note 5:
All unspecified radii: R2
Material: Drawing format: Source item:
EN AW-5083 H111 PL. 4 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/26/2022 won 1:2 Metric / mm. 0.2 kg
Draw.no.: Rev.no.:
AW990140097 A
D N sbyvej 26 - DK-5000 Odense C Title: Mounting bracket D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 201x57x149 1/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
FLAT PATTERN ( 1 : 1 )
(289,7)
DOWN 90 R6
B B
(103,4)
UP 90 R10
(144,9)
(51,2)
UP 20 R6
C C
(4)
(19,5)
AW990140097 A
D N sbyvej 26 - DK-5000 Odense C Title: Mounting bracket D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 201x57x149 2/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Views update after pos.1 dimension update 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A A
A
A-A ( 1 : 1 )
(64,5)
B (21,3) B
A
(72) 2
(35)
(34)
1
(18)
C Note 1: C
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 1 mm
- for angular dimensions: 1
1 1 AW990140100 Pin joint subassembly I 0,1 kg
2 1 Rivet Nut M10 5-7mm A4 0 kg
B Pos Qty
Drawn by:
Drawing No.
Revision Date: Checked by:
Title
Format: Scale:
Material
Unit:
Source item
Weight:
Mass
AW990140084 B
D N sbyvej 26 - DK-5000 Odense C Title: Pin joint subassembly II D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 72x35x65 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Views update after pos.1 dimension update 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A A
(72)
(64,5)
B B
1
1
16
(35)
C Note 1: C
General Notes: See AW001_
Note 2:
Unspecified tolerances:
a3
- for linear dimensions: 1 mm
a3 - for angular dimensions: 1
1 1 AW990140101 Rotation joint eye I EN AW-5754 H111 PL. 5 mm 0 kg
B 2 1 AW990140102
Pos Qty Drawing No.
Pin plate
Title
EN AW-5754 H111
Material
PL. 5 mm
Source item
0 kg
Mass
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 9/13/2022 won A3 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140100 B
D N sbyvej 26 - DK-5000 Odense C Title: Pin joint subassembly I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 72x35x65 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Dimension change from 15 to 20; views update; flat pattern dimensions update 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A A
64,5
33 +- 0,5
0
13,5 +- 0,5
0
)
(62
(43)
B B
26,5
(R5)
(5)
20
1
10
B
3
Note 1:
C General Notes: See AW001_ C
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5754 H111 PL. 5 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 9/13/2022 won 2:1 Metric / mm. 0.04 kg
Draw.no.: Rev.no.:
45 AW990140101 B
D N sbyvej 26 - DK-5000 Odense C Title: Rotation joint eye I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 43x64.5x39 1/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
FLAT PATTERN ( 2 : 1 )
A B A
(68,4)
(30,2)
B (5)
B B
DOWN 90 R5
(64,5)
C C
AW990140101 B
D N sbyvej 26 - DK-5000 Odense C Title: Rotation joint eye I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 43x64.5x39 2/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
R5
R5
B B
29
Note 1:
General Notes: See AW001_
13 +- 0,5
13
0 Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
(5) 20
Note 3:
C 45 C
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5754 H111 PL. 5 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/25/2022 won 2:1 Metric / mm. 0.02 kg
Draw.no.: Rev.no.:
AW990140102 A
Title:
N sbyvej 26 - DK-5000 Odense C Pin plate
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 5x29x45 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
115
35
15 15
B B
Note 1:
30
55
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
2x 8,5 +- 0,5
0 Note 3:
All unspecified radii: R2
C (5) 40 Note 4: C
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5083 H111 PL. 5 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 11/17/2021 won 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140103 A
Title:
N sbyvej 26 - DK-5000 Odense C Bumper plate
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 5x115x55 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(2,5)
( 13)
( 24)
B B
C C
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.2 mm
- for angular dimensions: 1
Material: Drawing format: Source item:
Nylon 6/6 A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 5: 1 Metric / mm. 0.001 kg
Draw.no.: Rev.no.:
AW990011064 A
D N sbyvej 26 - DK-5000 Odense C Title:
M12 Washer DIN125 PA 6,6 nylon D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 24x24x2.5 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
+
(10,5) 40 - 50
Note:
B Edge protection to B
be self-clamping
(17,4)
for 4mm plate
Note 1:
C General Notes: See AW001_ C
AW990014205 A
Title: Edge protection self-clamping
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 17.4x40x10.5 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(M8)
A(2:1)
(23)
( 40)
B B
(43)
Note 1:
General Notes: See AW001_
Note 2:
(20) Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
C Note 3: C
De-burr sharp edges.
Material: Drawing format: Source item:
EPDM DVA.4-40-20-SST-M8-23-55
A4
A Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 10/8/2021 won 2:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990022015 A
Title: Vibration damping element
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 40x43x40 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
(2)
A A
42
B B
15
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
C - for linear dimensions: 0.5 mm C
- for angular dimensions: 1
Material: Drawing format: Source item:
Nylon 6/6 PL. 2 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
kyd 10/8/2021 won 2:1 Metric / mm. 0.0 kg
Draw.no.: Rev.no.:
AW990140086 A
Title:
Kielbergvej 7 - DK-5750 Ringe Distancer
Tlf. +45 63 12 88 77 - Fax +45 62 29 24 92 Dimensions: Sheet no.:
drawings@alu-wind.com 2x42x42 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A (3) A
42
15
B B
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
C - for angular dimensions: 1 C
AW990140087 A
Title:
Kielbergvej 7 - DK-5750 Ringe Distancer
Tlf. +45 63 12 88 77 - Fax +45 62 29 24 92 Dimensions: Sheet no.:
drawings@alu-wind.com 3x42x42 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
22
29 (R2)
(R2) 10
10
B B
Note 1:
40
2 x M6x1 General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
10
(R2)
C Note 3: C
(R2) De-burr sharp edges.
Material: Drawing format: Source item:
EPDM rubber 40x22 Rubber Block
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/26/2022 won 2:1 Metric / mm. 0.02 kg
Draw.no.: Rev.no.:
AW990022012 A
Title:
N sbyvej 26 - DK-5000 Odense C Rubber stopper
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 22x29x40 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A-A ( 1 : 1 )
17 A
4
B
A 2 A
(112)
10 10 10
12
13
8
3
A 6
B
(35,8) (25)
B B
(157,4)
(138,2)
C C-C ( 1 : 1 )
11
16
Note 1:
General Notes: See AW001_
(105,3)
Note 2:
(117,5)
Unspecified tolerances:
- for linear dimensions: 2 mm
7 - for angular dimensions: 1
(87,5)
C C
1 3 AW990011035 M6 Washer DIN9021/ISO7093 PA 6,6 nylon Nylon 6/6 0 kg
2 1 AW990011065 M8 Washer DIN9021 PA 6,6 nylon Nylon 6/6 0 kg
3 1 AW990014204 Sleeve PTFE Tube 12x1.5mm 0 kg
4 1 AW990017157 Ball knob Polyamide PA DIN 319-KT-32-M8-C 0 kg
11 5 3 AW990022004 Female damper EPDM 0 kg
16
6 1 AW990126106 Gate lock plate EN AW-5754 H111 PL. 4 mm 0,2 kg
14 7 1 AW990126107 Bushing tube A4 Tube 16x1.5mm 0 kg
B-B ( 1 : 1 ) 15 8 1 EN ISO 7042 - M8 A4-80 0 kg
9 3 Exko M6x5 Nylon-6/6 0 kg
5 9 17
1 10 3 Exko M8x5 Nylon-6/6 0 kg
11 2 Exko M16x8 Nylon-6/6 0 kg
C 12 1 ISO 4017 - M8 x 20 A4-70 0 kg
13 1 ISO 4017 - M8 x 100 - ISO A4-80 A4-80 0 kg
14 1 ISO 4017 - M12 x 80 A4-80 0,1 kg
15 1 ISO 4035 - M12 A4 0 kg
16 2 ISO 7089 - 12 A4 0 kg
17 3 ISO 7380-1 - M6 x 12 A4-70 0 kg
Pos Qty Drawing No. Title Material Source item Mass
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 1/14/2022 won A2 1:1 Metric / mm. 0.5 kg
D Draw.no.: Rev.no.: D
17
AW990126105 A
Title:
9 N sbyvej 26 - DK-5000 Odense C Gate lock subassembly 1
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 118x157x112 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
1 5 1 9 17 and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
+
44 - 10 A-A ( 2 : 1 )
A ( 16)
B B
(1,5) Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0,5 mm
- for angular dimensions: 1
A
Note 3:
C De-burr sharp edges. C
AW990126107 A
Title: Bushing tube
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 44x16x16 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
(157,4)
FLAT PATTERN ( 1 : 2 )
35,8
60,8
85
0
A 19,9
R5 (56,2) (56,2)
A R15 (4) A
20
DOWN 90 R4
DOWN 90 R4
DOWN 50 R4
22,8
65
DOWN 50 R4
(163,6)
R20
8,5 +- 0,5
0 THROUGH ALL
(65,5)
(68,3)
11 +- 0,5
0 THROUGH ALL
(43,7)
A UP 50 R4
(38,6)
R5 R5
20
20 +- 0,5 THROUGH ALL UP 50 R4
0
(205,7)
B B
2
50,8
99,5
(R4) A-A ( 1 : 1 )
17
0
80 1
B-B ( 1 : 1 )
13
1
0
11 +- 0,5 (R4)
23,5
0
(R4)
1
(R4) 40 1
60
39 +- 01
1
(R4)
81
0,1 B
45,1 1
B
B B
1
A
40
0,1 A
C C
130
(R4)
8,5 +- 0,5
0 Note 2.
99,5 2
Note 1:
Unspecified tolerances:
- for linear dimensions: 0,2 mm
B-B ( 1 : 1 ) B - for angular dimensions: 1
R15 Note 2:
Outside edges to be rounded: R2 +2/-0
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5754 H111 PL. 4 mm
A2
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
44
D Draw.no.: Rev.no.: D
AW990126106 A
Title:
N sbyvej 26 - DK-5000 Odense C Gate lock plate
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 157.4x80x81 1/ 1
R15 Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
B and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
A-A ( 2 : 1 )
(29)
A
B B
(18,7)
(M8)
( 32)
Note 1:
C General Notes: See AW001_ C
(12) A
Material: Drawing format: Source item:
Polyamide PA DIN 319-KT-32-M8-C
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 8/16/2021 won 2:1 Metric / mm. 0.02 kg
Draw.no.: Rev.no.:
AW990017157 A
Title:
N sbyvej 26 - DK-5000 Odense C Ball knob
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 32x29x32 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
1,6
18
B B
6,
4
C C
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 1mm
- for angular dimensions: 1
Material: Drawing format: Source item:
Nylon 6/6 A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
RIG 9/28/2018 RIG 5:1 Metric / mm. 0.0004 kg
Draw.no.: Rev.no.:
AW990011035 C
D N sbyvej 26 - DK-5000 Odense C Title:
M6 Washer DIN9021/ISO7093 PA 6,6 nylon D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 18x18x1.6 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
20
max 7mm
min 5mm
10
M6x1 - 6H
Note 1:
General Notes: See AW001_
Note 2:
Insert in EN1.4404
Material: Drawing format: Source item:
EPDM A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
KOK 8/17/2021 RIG 2:1 Metric / mm. 0.003 kg
Draw.no.: Rev.no.:
AW990022004 D
Title:
N sbyvej 26 - DK-5000 Odense C Female damper
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 20x20x10 1/ 1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
(2)
A A
( 24)
( 8,4)
B B
C C
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.2 mm
- for angular dimensions: 1
Material: Drawing format: Source item:
Nylon 6/6 A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 5: 1 Metric / mm. 0.001 kg
Draw.no.: Rev.no.:
AW990011065 A
D N sbyvej 26 - DK-5000 Odense C Title:
M8 Washer DIN9021 PA 6,6 nylon D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 24x24x2 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
68 A-A ( 2 : 1 )
B 12 B
A
Note 1:
General Notes: See AW001_
Note 2:
+0 Unspecified tolerances:
9 - 0,5
A - for linear dimensions: 0,5 mm
- for angular dimensions: 1
C Note 3: C
De-burr sharp edges.
Material: Drawing format: Source item:
PTFE Tube 12x1.5mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 12/22/2021 won 2:1 Metric / mm. 0.01 kg
Draw.no.: Rev.no.:
AW990014204 A
Title:
N sbyvej 26 - DK-5000 Odense C Sleeve
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 68x12x12 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
30
45
(15) (R2)
(2) (R2)
B B
2 x M6x1 Note 1:
General Notes: See AW001_
50
Note 2:
Unspecified tolerances:
15
- for linear dimensions: 0.5 mm
(R2) - for angular dimensions: 1
12 (R2)
C Note 3: C
16 De-burr sharp edges.
Material: Drawing format: Source item:
EPDM rubber 50x30 Rubber Block
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/26/2022 won 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990022016 A
Title:
N sbyvej 26 - DK-5000 Odense C Rubber stopper
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 30x45x50 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
11
A-A ( 5 : 1 )
A
10,5 0,25
B B
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0,5 mm
- for angular dimensions: 1
13 +- 0,25
0
C Note 3: C
A De-burr sharp edges.
Material: Drawing format: Source item:
PTFE Tube 13x1.25mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 4/28/2022 won 5:1 Metric / mm. 0.001 kg
Draw.no.: Rev.no.:
AW990140236 A
Title:
N sbyvej 26 - DK-5000 Odense C Sleeve
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 11x13x13 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
2
(103,8)
A A-A ( 1 : 1 ) A
1
7
A
(45,4)
(67,4)
5
6
B 4 B
(57,3)
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
(67)
AW990140050 A
D N sbyvej 26 - DK-5000 Odense C Title: Hinge assembly 1 D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 104x67x67 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A (67) A
A A-A ( 1 : 1 )
Note 6.
a2
B B
(24)
(67,8)
max. 5
a2
x2
Note 1:
General Notes: See AW001_
B B
Note 2:
Assembly to be HDG after welding
A
45,4 +- 10 Note 3:
2 For corrosion protection and HDG
general requirements: See AW001_
B-B ( 1 : 1 ) Note 4:
Corrosion Protection Level against C4
environment acc. to ISO 12944-2
C(2:1)
Note 5:
2x
HDG layer minimum thickness to be 85 m
(51,4)
Note 6:
C Weld not to cross area up to 5mm from C
contact edge
(2)
Note 7:
(0,3) Unspecified tolerances:
(0,3) 1 mm
- for linear dimensions:
(11) 1
- for angular dimensions: 1
(39) C 1 1 AW990140052 Hinge clamp plate I S355JR PL. 4 mm 0,2 kg
2 1 AW990140053 Hinge clamp plate II S355JR PL. 4 mm 0,1 kg
Pos Qty Drawing No. Title Material Source item Mass
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 1/11/2022 won A3 1:1 Metric / mm. 0.3 kg
Draw.no.: Rev.no.:
AW990140051 A
D N sbyvej 26 - DK-5000 Odense C Title: Hinge clamp subassembly 1 D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 68x53x67 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
(4)
A 33,5
R15
A R15 A
18,3
1
43,8
(R4)
67
B A(2:1) B
B(2:1)
1
2x
51,4
18
B 1 X 45 1 X 45
13 +- 0,5
0
0
14
28
42
56
Note 1:
C General Notes: See AW001_ C
FLAT PATTERN ( 1 : 1 )
Note 2:
(87,5)
Unspecified tolerances:
- for linear dimensions: 0.5 mm
(40) (4) - for angular dimensions: 1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
S355JR PL. 4 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
UP 90 R4
AW990140052 A
D N sbyvej 26 - DK-5000 Odense C Title: Hinge clamp plate I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 67x51.4x43.8 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
67
R5
13,5 0,25 9,5 R5
A (4) 9,5 A
10,5
A(2:1) B(2:1)
0,25
13 +- 0,5
0
23,8
18
2x 8,5 +- 0,5
0
4,5 +- 0,25
0
B B
67,8
14,5 +- 0,25
0
B
18,3
Note 1:
C R15 General Notes: See AW001_ C
R15
Note 2:
10,8 0,25
Unspecified tolerances:
A
- for linear dimensions: 0.5 mm
33,5 - for angular dimensions: 1
Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
S355JR PL. 4 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 12/17/2021 won 2:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140053 A
D N sbyvej 26 - DK-5000 Odense C Title: Hinge clamp plate II D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 4x67.8x67 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(24)
(67)
(12,5)
(48)
( 10)
(6,3)
B B
( 6,5)
(55)
(38)
(12,5)
Note 1:
C General Notes: See AW001_ C
AW990005050 A
Title: Spring hinge
N sbyvej 26 - DK-5000 Odense C
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 55x24x67 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
67
( 3) 9,5 (48)
B B
Note 1:
8,5
General Notes: See AW001_
19
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
R5 Note 3:
C C
2x 8 +- 0,5
0 De-burr sharp edges.
Material: Drawing format: Source item:
Nylon 6/6 PL. 3 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 12/30/2021 won 2:1 Metric / mm. 0.004 kg
Draw.no.: Rev.no.:
AW990140064 A
Title:
N sbyvej 26 - DK-5000 Odense C Distancer
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 3x19x67 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
A R1 A-A ( 5:1 )
B B
7,6
Note 1:
M6x1 General Notes: See AW001_
5,2 Note 2:
A
Unspecified tolerances:
C 7 - for linear dimensions: 0.5 mm C
- for angular dimensions: 1
Material: Drawing format: Source item:
Hard rubber/plastic Default
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 12/17/2021 won 5:1 Metric / mm. 0.0002 kg
Draw.no.: Rev.no.:
AW990140081 A
Title:
N sbyvej 26 - DK-5000 Odense C Thread protection I
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 7.6x7x7.6 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
A-A ( 1 : 1 )
(68) 23,5
z4
z4
5
B B
1
Note 3.
(94)
Note 1:
General Notes: See AW001_
Note 2:
C C
Unspecified tolerances:
A - for linear dimensions: 1 mm
(51) - for angular dimensions: 1
Note 3:
Weld not to cross area up to 5mm from contact edge
1 1 AW990140062 Clamp EN AW-5083 H111 PL. 4 mm 0,1 kg
2 1 AW990140063 Clamp plate I EN AW-5083 H111 PL. 4 mm 0 kg
Pos Qty Drawing No. Title Material Source item Mass
Drawn by: Revision Date: Checked by: Format: Scale: Unit: Weight:
won 12/22/2021 won A3 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140061 A
D N sbyvej 26 - DK-5000 Odense C Title: Hinge clamp assembly I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 51x94x68 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
68
A-A ( 1 : 1 )
A
( 51) +
43 - 20
B B
2
70
Note 3.
16
Note 1:
(4)
34 R15 General Notes: See AW001_
Note 2:
A 13 +- 0,5
0 THROUGH ALL Unspecified tolerances:
C C
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
Note 3:
FLAT PATTERN ( 1 : 2 ) Outside edges to be rounded: R2 +2/-0
Note 4:
(162,1)
Draw.no.: Rev.no.:
AW990140062 A
(68)
1 2 3 4 5 6
1 2 3 4 5 6
A A
68
( 4) 10 (48)
B B
13,5
Note 1:
General Notes: See AW001_
24
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
R5
C Note 3: C
2x 8,5 +- 0,5
0 De-burr sharp edges.
Material: Drawing format: Source item:
EN AW-5083 H111 PL. 4 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 10/6/2021 won 2:1 Metric / mm. 0.02 kg
Draw.no.: Rev.no.:
AW990140063 A
Title:
N sbyvej 26 - DK-5000 Odense C Clamp plate I
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 4x24x68 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
A-A ( 5 : 1 )
A
9
B B
AW990140082 A
Title:
N sbyvej 26 - DK-5000 Odense C Thread protection I
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 7.6x9x7.6 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
( 50) ( 19)
B B
(15)
Threaded knob
for the locking of the
rotating part of the gate
(70)
C C
(40)
(M10)
Note 1:
General Notes: See AW001_
Material: Drawing format: Source item:
VTT.50-p-M10x25-LP
EN 1.4547 A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 11/10/2021 won 1:1 Metric / mm. 0.2 kg
Draw.no.: Rev.no.:
AW990140099 A
D N sbyvej 26 - DK-5000 Odense C Title: Railing removable knob D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 50x50x55 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Removal of AW990140200,-213,-228; add. of pos. 2,3,6,7,9,10; update of pos. 1; views re-arrangement;title update 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A
B (306,5) (223,8) A
(602,5)
B B
(483,2) B
(458,2) B
B
E(1:2)
(401) B 2x
A A
9
B-B ( 1 : 5 )
(0,8)
2 3
B B
1 7
D 10
(170,2)
(145,2)
2 Note 1:
C General Notes: See AW001_
Note 2:
0 Unspecified tolerances:
B B - for linear dimensions: 2 mm
A-A ( 1 : 5 ) - for angular dimensions: 1
D(1:2) B 1 1 AW990140214 Fixation post assembly I 2,4 kg
C 2x C(1:2) 2 2 AW990140237 Boss fixation bracket I clamp S355J2 PL. 5 mm 1 kg C
2x 3 2 AW990140238 Fixation distance plate III S355JR PL. 3 mm 0,1 kg
(2)
5 9
(1 7 ) 4 2 EN ISO 7042 - M10 A4-80 0 kg
4 10 5 8 Exko M10x5 Nylon-6/6 0 kg
6 2 Exko M16 x 5 Wide Nylon-6/6 0 kg
8
E 7 2 Exko M16 x 8 Wide Nylon-6/6 0 kg
8 2 ISO 4014 - M10 x 75 - ISO A4-80 A4-80 0,1 kg
( 125 )
AW990140201 B
D N sbyvej 26 - DK-5000 Odense C Title:
Boss fixation 450W7948P001 Type A D
B Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 307x668x224 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Pos. re-numbering; views update and addition, add. of view B,C; add. of pos. 1 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A A
B (85,1)
3
B B B A(1:2) s2 C(1:2)
(554) B
2 A
B-B ( 1 : 1 )
a4
401
B C B
B Note 1:
(602,5)
AW990140214 B
D N sbyvej 26 - DK-5000 Odense C Title:
Fixation post assembly I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 42.4x85.1x602.5 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
Rev. Description Date Approved ECR
B Part length update (view C), holes position update (view C,D) 13.09.2022 WON ECR-6363-2022-09-01-WON-JPW-800943&800860-130055&1
A A
B A
A-A ( 1 : 2 )
C
B 30
3x 13 +- 0,5 A
0 C-C ( 1 : 2 )
(4 )
( 42,4)
C
B B
597,5
554
306
76
0
B-B ( 1 : 2 )
B
2x 13 +- 0,5
0
B
13
D-D ( 1 : 2 )
D
D
Note 1:
C General Notes: See AW001_ C
Note 2:
483,2
170,2
0
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 0.5
B B Note 3:
De-burr sharp edges.
Material: Drawing format: Source item:
S355JR Tube 42,4x4mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 8/30/2022 won 1:2 Metric / mm. 2.2 kg
Draw.no.: Rev.no.:
AW990140215 B
D N sbyvej 26 - DK-5000 Odense C Title:
Fixation tube I D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 42.4x42.4x597.5 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
(5)
B 42,4 B
Note 1:
General Notes: See AW001_
Note 2:
Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
C Note 3: C
De-burr sharp edges.
Material: Drawing format: Source item:
S355JR PL. 5 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 2022/3/23 won 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140218 A
Title:
N sbyvej 26 - DK-5000 Odense C Fixation tube endplate
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 5x42.4x42.4 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
30 +- 0,5
0 A-A ( 2 : 1 )
A
16 +- 0,5
45
0
R3
+
2 - 20 R3
B B
8
R3
(48,6)
33,9
25,9
96 B
A
Note 1:
37,1
14,9
AW990140115 A
D 3,7 N sbyvej 26 - DK-5000 Odense C Title: Spring fixaion eye for stanchion D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 10x48.9x37.1 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
(R8) (R8)
A A
142
(R8)
144
(R8) A(1:1) B(1:2)
THROUGH ALL 2x
13 +- 0,5
1 26 0 19,5 +- 0,5
0
124
(74 )
(R8) (R8)
20
29,5
(306,9)
R5 R5 (160,1)
B B
A A
Note 1:
General Notes: See AW001_
50
0,25
Note 2:
For corrosion protection and HDG
R5
25
general requirements: See AW001_
0,25
R5
A-A ( 1 :2 ) A 28,2 Note 3:
25
55,4 1 63,6 1 Corrosion Protection Level against C4
environment acc. to ISO 12944-2
Note 4:
26 0,25 HDG layer minimum thickness to be 85 m
C 25,8 C
11
0,25 Note 5:
4, 5
7
9,
Unspecified tolerances:
11
1
61 - 20
28,2
S355J2 PL. 5 mm
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 9/15/2022 won 1 :2 Metric / mm. 1.0 kg
Draw.no.: Rev.no.:
AW990140237 A
D + D
57 - 20
Title:
N sbyvej 26 - DK-5000 Odense C Boss fixation bracket I clamp
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 50x307x160 1/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
FLAT PATTERN ( 1 : 2 )
(178,5)
(238,4)
(285,4)
(347,1)
(458,6)
(512,1)
(61,7)
B B
(5)
0
(50)
UP 38 R8 UP 56 R8
UP 54 R8 UP 36 R8
DOWN 90 R8
C C
DOWN 90 R8
AW990140237 A
D N sbyvej 26 - DK-5000 Odense C Title:
Boss fixation bracket I clamp D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 50x307x160 2/2
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A-A ( 2 : 1 )
2
A A
5
16,2
19,2
40
B B
A A
1:1
C C
1 2 3 4 5 6
1 2 3 4 5 6
A A
(3) 50 Note 1:
General Notes: See AW001_
Note 2:
19,5 +- 0,5
0 For corrosion protection and HDG
B general requirements: See AW001_ B
Note 3:
50
Note 4:
HDG layer minimum thickness to be 85 m
Note 5:
(25) Unspecified tolerances:
C - for linear dimensions: 0.5 mm C
- for angular dimensions: 1
Material: Drawing format: Source item:
S355JR PL. 3 mm
A4
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 9/2/2022 won 1:1 Metric / mm. 0.1 kg
Draw.no.: Rev.no.:
AW990140238 A
Title:
N sbyvej 26 - DK-5000 Odense C Fixation distance plate III
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 3x50x50 1/1
D Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons
D
ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A-A ( 2 : 1 ) A
2
A
40
B B
16,2
19,2
Note 1:
8 Unspecified tolerances:
C A - for linear dimensions: 0.2 mm C
- for angular dimensions: 1
(1:1) Material:
Nylon-6/6
Drawing format:
A4
Source item:
1 2 3 4 5 6
1 2 3 4 5 6
A A
A
A-A ( 1 : 1 )
36
31
B B
5
A
Initial length: 247
Note 1:
General Notes: See AW001_
C C
Note 2:
Spring to be tension spring acc. to DIN 2097
Note 3:
Spring to be have stiffness c=4.45 N/mm or higher
Note 4:
Spring to have elongation +129 mm
Material: Drawing format: Source item:
EN 1.4404 DIN 2097
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 8/2/2022 won 1:1 Metric / mm. 0.5 kg
Draw.no.: Rev.no.:
AW990140112 A
D Kielbergvej 7 - DK-5750 Ringe Title: Gate tension spring D
Tlf. +45 63 12 88 77 - Fax +45 62 29 24 92 Dimensions: Sheet no.:
drawings@alu-wind.com 305.2x36.2x36.3 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6
1 2 3 4 5 6
A A
A-A ( 2 : 1 )
5
+
7 - 21
B B
Note 1:
C General Notes: See AW001_ C
Note 2:
A A Unspecified tolerances:
- for linear dimensions: 0.5 mm
- for angular dimensions: 1
Note 3:
Item to be ordered as straight
Material: Drawing format: Source item:
Rubber PVC/Heat shrinkable sleeve
A3
Drawn by: Revision Date: Checked by: Scale: Unit: Weight:
won 9/20/2022 won 2:1 Metric / mm. 0.001 kg
Draw.no.: Rev.no.:
AW990140242 A
D N sbyvej 26 - DK-5000 Odense C Title:
Insulation sleeve D
Phone: +45 63 12 88 77 Dimensions: Sheet no.:
drawings@aluwind.com 38.1x38x22.6 1/1
Modifications of forwarded specifications, drawings etc. suggested by Aluwind are solely based on production engineering reasons ISO
and not on a question of the suitability of the product for the presumed purpose. Consequently the customer alone is responsible if
such modifications basing on production engineering reasons deteriorates the suitability of the product for the presumed purpose.
Drawings must not be copied or made available to any third part without written permission from Aluwind.
1 2 3 4 5 6