Professional Documents
Culture Documents
Amendment NO. 2 April 2001 TO IS 1852:1985 Specification For Rolling and Cutting Tolerances For Hot-Rolled Steel Products
Amendment NO. 2 April 2001 TO IS 1852:1985 Specification For Rolling and Cutting Tolerances For Hot-Rolled Steel Products
(Page 17, clause 73.1 ) — Substitute the following for the existing clause:
‘The measurement shall be taken at a distance of at least 15 mm imide from the
edge.’
(Page 17, clause 7.4 ) – Delete.
(CED8)