MdMASTER-CARR.
78-8 Stainless Steel Dowel Pin
$1078 per pack of 25,
‘31mm Diameter, 30 mm Long SrssAa10
=, PnType Dowel
edie Pin
Salt Type Pin
End Spe Chaneres
system of essuraren! Metre
ai] vor so. Stainesssiee
= cong som
=> Diameter Tolerance 0.602 t0 0.008 mm
ven wares notratea
Breaking Svenath Net Rated
Tolerance Rating Stands
Passiaon Pasnvated
pons fot 215869 Compare
EACH EACH EC 1007/2006 06/14/2023, 236 SVC) Camelant
oars Not Specaly Wetals Comaint
Counryot igh) Belgium France, Germany, Pia, anes, Ra Japan,
Malaysia, Peoples Republic 0% China, Priippines, Poland,
South Korea, Switzerland, Talwan, Thailané, or Vietnam
Schedule S| "731829.0000
Uso dowel pins as pivots, hinges, shaft, igs, and fixtures to locale or hold parts. Fora tight it your hole
‘should be equal tar alight smalar than the clameter shown, Breaking strength is measured as double
‘shear, which s tho force requirod to break a pin int tree pisces,
‘Stainless ste pins are more corrosion resistant than steel pins. Pins that are passivated offer added
protection against corrosion and oxdation. Stainless steel pins are precision ground except for wee"
‘ameter pins. 10.9 stainless see! pins offer a balance of strength and corrosion resistance. Tey may be
tilly magnetic. Some pine meet material and dimensional standards set by ASME, Mi. Spec. DIN, ot SO.
150 2938.6 is functionally equivalent te DIN 7, but the ends ae chamfered instead of rounded.
4 pee 2mm 1 |
(MAMASTER-CARR, 199) 32) 915854410
‘The information in this 3-0 model provides for reference ony.