Professional Documents
Culture Documents
1. Remove lid from Alarm control unit leaving electrical plug connected.
2. Disarm the alarm using the Transmitter.
3. Connect both green tagged wires (Micro switch) to 12 volts (Battery +)
4. Connect vertical Resistor lead in centre of potted PCB to ground
1. Remove lid from Alarm control unit leaving electrical plug connected.
2. Disarm the alarm using the Transmitter.
3. Connect both green tagged wires * (Bullet connectors to Micro switch) to 12
volts (Battery +)
4. Connect vertical Resistor lead in centre of potted PCB to ground