Professional Documents
Culture Documents
Analyzer AX
Advanced data collector/FFT analyzer
Key features
• Simultaneous triaxial or 4-channel SKF Microlog AX is a full-featured, 4-channel, high performance
measurements for fast data collection route and off-route portable data collector / FFT analyzer.
• 806 MHz Xscale processor means faster
real time rate and display updates Application modules to customize
• Rugged, dust /water-proof IP65 design for SKF Microlog AX
reliability in industrial environments
The SKF Microlog AX has a modular design to
• Rechargeable lithium battery supports
allow users to select application modules to
8 hours of continuous data collection
suit their individual requirements.
• Large 6.4" VGA color display for easy
• AX-M model – 4-channel off-route /
viewing and analysis in any light
2-channel or simultaneous triaxial route
Combines with SKF @ptitude Analysis and 2-channel Balancing modules
are already installed. The AX-M is upgradable
software for in-depth analysis to the AX-S or AX-F.
and reporting
• AX-S model – All the features of the
SKF Microlog AX connects seamlessly with SKF AX-M with the Bump Test and Data Recorder
@ptitude Analyst 4.1 software for single users modules added.
and can be networked facility-wide using SKF
@ptitude Monitoring Suite. The addition of • AX-F model – Further enhances capability
SKF @ptitude Decision Support allows com- by adding Run up Coast down (RuCd),
munication with your facility’s CMMS or EAM Frequency Response Function (FRF) and
system and automates reliability maintenance Check to Conformance modules.
decision making by identifying probable faults All modules can also be ordered separately.
and prescribing appropriate action.
SKF Microlog Analyzer AX Powerful software to complete
The AX takes the difficulty out of your analysis system
performing condition monitoring by SKF @ptitude Analyst provides fast,
analyzing vibration signal and process efficient and reliable storage, analysis
variables using 4-channel off-route and retrieval of complex machine data
measurements and one or two plane and makes the information accessible
static or dynamic couple balancing throughout your organization.
applications over a range of 10 CPM
• Easy to learn and use for novice
(0,16 Hz) to 4,800,000 CPM (80 kHz).
or experienced users
Bearing assessments are carried out
using the industry proven SKF • Inter-connectivity with other
Acceleration Enveloping (gE) technology. software programs and systems
The AX utilizes the latest advances in • Preference options let SKF @ptitude SKF Microlog AX provides fast data collection
analog and digital electronics, including Analyst work the way you work and analysis. The large screen facilitates viewing
in any light.
digital signal processing (DSP) and high
resolution Sigma-Delta A/D converters,
to provide both speed and accuracy in
the data collection process. SKF @ptitude Analyst is part of the SKF
@ptitude Monitoring Suite, a comprehen-
sive software suite that integrates data
from a wide range of SKF portable and
on-line acquisition devices.
Specifications
Performance FFT resolution: 100 – 25,600 lines System
Signal input: Accelerometer, velocity, displace- Time block length: 256 – 65,536 samples Communication:
ment (from hand-held or installed transducers), Averaging: RMS, Time, Peak Hold • USB 1.1 (rear panel and docking station)
AC/DC sensors, pressure sensors, temperature Alarms: Overall and Spectrum (Peak and RMS • Microlog protocol & Microsoft® ActiveSync®
sensors, tachometer and manual entry level) User indicators: Blue, Green, Amber and Red
Measurement parameters: Acceleration, LED’s
velocity, displacement, gE, temperature, phase, Enclosures
Battery: Li-Ion 6600 mA hr with integral gas
voltage, user specified Size: 220 x 220 x 71 mm gauging (8 hrs continuous operation minimum)
Measurement types: Overall, spectrum, time
Weight: 1.54 Kg Battery recharge: Internally via docking station
waveform, phase, orbits, shaft center line
Display: 6.4" TFT VGA, Backlit Color LCD, (640 x or external charger
Input channels:
480 resolution, 18 bit color) Operating system: Microsoft® Windows®
• CH1: 6-pin Fischer CH1, CH2, CH3, CH4
Embedded CE 6.0
(labeled R) (ICP™/AC /DC input), strobe out Environmental
• CH2: 6-pin Fischer CH2 & CH3 (ICP™/AC /DC Processor: Marvell 806 MHz PXA320
input), +5 V tacho out Sealing: EN60529 IP65 (Dust- and waterproof) DSP: Freescale DSP56311
• USB HOST/ CH R/: 7-pin Fischer R (ICP™ / Drop test: 1.2 m (4 ft) – To MIL STD-810F (with
AC/DC input), USB HOST, audio out stand retracted) Memory
• USB DEV / TRIG / PWR: 7-pin Fischer USB Temperature ratings: Internal RAM:
DEV, charger, ext trigger aux, +5 V tacho out • Operating temperature: –10 to +60 °C
• 128 MB DDR SDRAM
Input signal range: ±25 V Maximum (+14 to +140 °F)
• 128 MB NAND Flash
Signal: RMS / Peak / Pk-Pk / True Peak / True • Storage temperature: –20 to +60 °C
(–4 to +140 °F) SD card: Can support up to 4 GB
Pk-Pk
• Humidity: 10 to 90 % RH, non-condensing at
Transducer check: Bias Voltage Integrity (o/c 0 to +50 °C (+32 to +122 °F)
Host software
and s/c detection) Vibration: MIL STD-810 transportation The SKF Microlog AX series requires SKF
Auto range: Yes @ptitude Analyst version 4.1 or later and USB
Certification:
Dynamic range: >90 dB communications.
• CE rated
Frequency range: DC to 80 kHz • CSA Class I, Div 2 Groups A, B, C & D ,
Bearing condition: gE temperature Code T4A@Ta=50C
gE filters: 5 Hz – 100 Hz, 50 Hz – 1 kHz,
500 Hz – 10 kHz, 5 kHz – 40 kHz
SKF Microlog Analyzer AX – Advanced data collector/FFT analyzer