Professional Documents
Culture Documents
counterclockwise adjustment
SUN cavity interchange, T-11A RE 18320-16
Edition: 03.2016
VBSN-08UU-RS 04.52.42 - X - 20 - Z Replaces: 01.2010
Technical data
Max. operating pressure 280 bar (4000 psi)
Max. flow 30 l/min (8 gpm)
Max. internal leakage 1)
15 drops/min.
Fluid temperature range -30 to 100 °C (-22 to 212 °F)
Installation torque 40 - 50 Nm (30 - 37 ft-lbs)
Weight 0.18 kg (0.4 lbs)
Cavity SUN T-11A
Lines bodies and standard Please refer to section “Hydraulic
assemblies integrated circuit” or consult factory
Seal kit2) Code: RG08U9020110100
Description material no: R901193388
When pressure at 2 rises above the spring bias pressure, Fluids Mineral-based or synthetics with lubri-
the check seat is pushed away from the piston and flow is cating properties
allowed from 2 to 1. at viscosities of 10 to 500 mm2/s (cSt)
When load pressure at 1 rises above the pressure setting Recommended degree of Nominal value max. 10µm (NAS 8) /
(turn counterclockwise to increase setting - turn clockwise fluid contamination ISO 4406 19/17/14
to decrease setting), the direct-acting, relief function Installation position No restrictions
is activated and flow is relieved from 1 to 2. With pilot Other Technical Data See data sheet 18350-50
pressure at 3, the pressure setting is reduced in proportion
Pressure setting: at least 1.3 times the load induced pressure.
to the stated ratio of the valve, until fully open with free-flow
At 70% of pressure setting
from 1 to 2. The spring chamber is drained to 2, and any 1)
Characteristic curve
Pressure Δp
Flow Q
Series 0/A to L
unchanged performances and dimensions
Counterbalance,
standard guided poppet type, coun-
terclockwise adjustment Version and options standard
SPRINGS
Preferred types
Type Material number Type Material number
045242102020000 R930006107
045242372020000 R930006108
Dimensions
Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information set
Via Leonardo da Vinci 5 forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
P.O. Box no. 5 may not be reproduced or given to third parties without its consent. The data
41015 Nonantola – Modena, Italy specified above only serve to describe the product. No statements concerning
Tel. +39 059 887 611 a certain condition or suitability for a certain application can be derived from
Fax +39 059 547 848 our information. The information given does not release the user from the
compact-hydraulics-cv@boschrexroth.com obligation of own judgment and verification. It must be remembered that our
www.boschrexroth.com/compacthydraulics products are subject to a natural process of wear and aging. Subject to change.