Professional Documents
Culture Documents
SPECIFICATIONS
Operating pressure: max. 250 bar
The pressure compensator DW05830V
is a normally open, direct-acting, spring- Nominal flow: max. 10 l/min
loaded flow control valve which operates Media operating temperature range: min. -30 °C to max. +100 °C
smoothly. Ambient temperature range: min. -30 °C to max. +100 °C
By maintaining a constant differential Operating fluid: Hydraulic oil to DIN 51524 Part 1 and 2
pressure between inlet and outlet of an Viscosity range: min. 10 mm²/s to max. 420 mm²/s
orifice (ports 1 and 3 of the pressure
Filtration: Class 21/19/16 according to ISO 4406 or
compensator), a constant flow rate is
cleaner
maintained (independently of the load
pressure). As soon as the pressure MTTFd: 150 years (see "Conditions and
differential exceeds the value pre-set by instructions for valves" in brochure 5.300)
the spring force, the control piston reduces Installation: No orientation restrictions
an orifice cross-section. Materials: Valve body: high tensile steel
The pressure compensator can, for Closing element:hardened and
example, be used when raising variable ground steel
loads at the same velocity. Together with Seals: NBR (standard)
a proportional flow control valve it can FKM (optional, media
be used as a 2-way proportional flow temperature range
regulator.
E 5.195.3/04.14
156
DIMENSIONS hex. SW 22
MODEL CODE
torque 25+5 Nm
DW 05830 V – 21 – C – N – 10
Basic model
Pressure compensator
Cavity
Function symbol
V = upstream pressure compensator
Type
21 = without damping, without venting
22 = with damping, without venting
Seals
N = NBR (standard)
V = FKM (optional)
Standard models
Model code Part No.
DW05830V-21-C-N-05 3152308
DW05830V-21-C-N-10 3031531
millimeter Other models on request
subject to technical modifications
Line bodies and seal kits on request
CAVITY PERFORMANCE
05830
Measured at ν = 33 mm²/s, Toil = 46 °C
10
8
Flow [l/min] from 2→1
fitting depth
fitting depth
0
0.5 1 1.5 2 2.5
Form tools
NOTE HYDAC Fluidtechnik GmbH
E 5.195.3/04.14
Tool Part No. The information in this brochure relates to the Justus-von-Liebig-Str.
operating conditions and applications described. D-66280 Sulzbach/Saar
Countersink In preparation For applications or operating conditions not
described, please contact the relevant technical Tel: 0 68 97 /509-01
Reamer In preparation millimeter
subject to technical modifications
department. Fax: 0 68 97 /509-598
Subject to technical modifications. E-Mail: flutec@hydac.com
157