Professional Documents
Culture Documents
HD-L
Flush Joint Connection
®
HD-L Flush Joint Connection
Service Recommendation
• The ST-L and HD-L connections incorporate a hooked
threaded design. This provides maximum structural
dependability for a flush OD connection. Both ST-L and
HD-L connections have metal-to-metal internal and exter-
nal pressure seals (sizes less than 14” only). This pro-
vides maximum pressure integrity and seal dependability.
The Atlas Bradford ST-L and HD-L connections are,
therefore, both recommended for drilling and production
applications where maximum clearance is required. HD-L
connections has a higher compression rating than ST-L
connections and should be used when severe compres-
sion or bending load resistance is required.
5-1/2 15.50 15.35 1600 1800 2100 2400 2300 2700 2400 2700 2700 3200 3100 3500
Notes:
On 4-1/2” and 5” sizes use casing table torques for weights heavier than those listed in tubing table.
P R E M I U M C O N N E C T I O N S
A T L A S B R A D F O R D
®
HD-L Torque Data
HD-L® Casing Connection Torque Data
Size J-55/K-55 L-80/N-80 C-90 C-95/T-95/HC-95 P-110 Q-125
OD Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum
in. ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs ft-lbs
4-1/2 2000 2200 2500 2800 2700 3000 2800 3000 3000 3400 3300 3700
5 2400 2700 3000 3400 3200 3600 3400 3600 3700 4200 4100 4600
5-1/2 2700 3000 3500 3900 3700 4200 3900 4200 4300 4900 4700 5400
6-5/8 4100 4500 5100 5800 5600 6300 5800 6300 6500 7400 7100 8100
7 4300 4800 5500 6300 6000 6800 6300 6800 7000 8000 7700 8900
7-5/8 5200 5900 6700 7600 7300 8300 7600 8300 8500 9800 9400 10800
7-3/4 5300 5900 6800 7700 7400 8500 7700 8500 8700 9900 9600 11000
8-5/8 6700 7500 8700 9900 9500 10800 9900 10800 11000 12700 12200 14100
9-5/8 8100 9200 10600 12200 11700 13400 12200 13400 13700 15700 15200 17500
9-7/8 9000 10100 11700 13300 12700 14500 13300 14500 14800 17000 16400 18900
10-3/4 10400 11700 13600 15600 14900 17100 15600 17100 17500 20200 19400 22500
11-3/4 12600 14200 16500 18900 18100 20800 18900 20800 21300 24600 23700 27500
11-7/8 13000 14700 17100 19600 18700 21500 19600 21500 22000 25400 24500 28300
13-3/8 16800 19000 22200 25500 24400 28000 25500 28000 28700 33200 32000 37000
13-5/8 17900 20200 23500 26900 25800 29600 26900 29600 30300 34900 33700 38900
Notes:
On 4-1/2” and 5” sizes use casing table torques for weights heavier than those listed in tubing table.
P R E M I U M C O N N E C T I O N S
A T L A S B R A D F O R D
®
HD-L Casing and Tubing Connection Data
Load Data
N-80 C-90 C-95/T-95 High Collapse-95 P-110 Q-125
Reference Reference Reference Reference Reference Reference Reference Reference Reference Reference Reference Reference
Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum
Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Size
Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load OD
1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs 1000 lbs ft 1000 ft 1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs in.
57 8080 71 64 9090 71 67 9590 75 67 9590 78 78 11110 89 89 12620 96 2-3/8
71 8790 89 80 9890 89 84 10440 93 84 10440 97 97 12090 111 111 13730 119
73 8850 91 82 9960 91 87 10510 96 87 10510 100 100 12170 114 114 13830 123
91 8900 114 103 10010 114 108 10560 120 108 10560 125 125 12230 142 142 13900 154
71 8210 89 80 9240 89 84 9750 93 84 9750 97 97 11290 111 111 12830 119 2-7/8
96 8910 119 107 10020 119 113 10580 125 113 10580 131 131 12250 149 149 13920 161
108 9130 135 121 10270 135 128 10840 142 128 10840 148 148 12550 169 169 14260 182
117 9110 147 132 10250 147 139 10810 154 139 10810 161 161 12520 183 183 14230 198
138 9490 173 155 10680 173 164 11270 181 164 11270 190 190 13050 216 216 14830 233
111 9030 139 125 10160 139 132 10730 146 132 10730 153 153 12420 174 174 14110 188 3-1/2
137 9900 172 155 11140 172 163 11760 180 163 11760 189 189 13610 215 215 15470 232
158 8990 197 177 10120 197 187 10680 207 187 10680 217 217 12370 246 246 14050 266
223 10370 279 251 11670 279 265 12320 293 265 12320 307 307 14260 349 349 16200 377
136 9260 170 153 10420 170 161 11000 178 161 11000 186 186 12730 212 212 14470 229 4
149 9370 186 167 10550 186 177 11130 195 177 11130 205 205 12890 233 233 14650 251
164 9040 205 184 10170 205 194 10730 215 194 10730 225 225 12430 256 256 14120 276
142 8930 177 160 10040 177 168 10600 186 168 10600 195 195 12280 222 222 13950 239 4-1/2
152 8870 190 171 9980 190 181 10540 200 181 10540 209 209 12200 238 238 13870 257
162 8870 202 182 9970 202 192 10530 212 192 10530 223 223 12190 253 253 13850 273
185 8830 232 208 9940 232 220 10490 243 220 10490 255 255 12140 290 290 13800 313
211 9030 264 238 10150 264 251 10720 277 251 10720 291 291 12410 330 330 14100 357
256 9760 319 287 10990 319 303 11600 335 303 11600 351 351 13430 399 399 15260 431
318 10640 398 358 11960 396 376 12640 418 378 12640 438 438 14640 487 487 16630 537
161 7740 201 181 8700 201 191 9190 211 191 9190 221 221 10640 252 252 12090 272 5
219 8720 274 246 9810 274 260 10350 287 260 10350 301 301 11990 342 342 13620 369
265 9470 332 299 10660 332 315 11250 348 315 11250 365 365 13020 415 415 14800 448
280 9690 350 315 10900 350 333 11510 368 333 11510 385 385 13330 438 438 15150 473
296 9910 370 333 11150 370 351 11770 388 351 11770 406 406 13630 462 462 15490 499
335 10370 419 377 11670 419 398 12320 440 398 12320 461 461 14260 524 524 16210 566
358 10630 447 402 11960 447 425 12620 469 425 12620 492 492 14610 559 559 16600 603
186 7880 233 209 8860 233 221 9350 244 221 9350 256 256 10830 291 291 12310 314 5-1/2
240 8640 300 270 9720 300 285 10260 314 285 10260 329 329 11680 374 374 13500 404
301 9540 376 339 10730 376 357 11330 395 357 11330 414 414 13120 470 470 14900 508
369 10320 461 415 11610 461 438 12250 484 438 12250 507 507 14190 577 577 16120 623
430 10920 537 484 12280 537 511 12960 564 511 12960 591 591 15010 672 672 17060 725
292 8860 366 329 9960 366 347 10520 384 347 10520 402 402 12180 457 457 13840 493 6-5/8
366 9450 457 411 10630 457 434 11220 480 434 11220 503 503 12990 571 571 14760 617
449 10290 562 505 11570 562 534 12210 590 534 12210 618 618 14140 702 702 16070 758
517 10790 646 581 12140 646 614 12810 678 614 12810 710 710 14840 807 807 16860 872
252 7960 315 284 8960 315 299 9450 331 299 9450 347 347 10950 394 394 12440 426 7
303 8450 379 341 9500 379 360 10030 398 360 10030 417 417 11610 474 474 13200 512
375 9340 469 422 10500 469 446 11090 493 446 11090 516 516 12840 587 587 14590 634
441 9950 552 497 11200 552 524 11820 579 524 11820 607 607 13690 690 690 15550 745
506 10460 633 570 11770 633 601 12420 665 601 12420 696 696 14380 791 791 16340 854
569 10910 712 640 12280 712 676 12960 747 676 12960 783 783 15010 890 890 17050 961
P R E M I U M C O N N E C T I O N S
A T L A S B R A D F O R D
®
HD-L Casing and Tubing Connection Data
Load Data
N-80 C-90 C-95/T-95 High Collapse-95 P-110 Q-125
Reference Reference Reference Reference Reference Reference Reference Reference Reference Reference Reference Reference
Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum
Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Size
Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load OD
1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs 1000 lbs ft 1000 ft 1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs in.
291 8130 364 327 9150 364 346 9660 382 346 9660 400 400 11180 455 455 12710 491 7-5/8
351 8630 438 395 9710 438 416 10250 480 416 10250 482 482 11860 548 548 13480 592
445 9620 556 501 10820 556 528 11420 584 528 11420 612 612 13230 695 695 15030 751
555 10420 694 625 11720 694 659 12380 729 659 12380 763 763 14330 867 867 16280 937
657 11080 822 740 12460 822 781 13150 863 781 13150 904 904 15230 1027 1027 17310 1109
711 11370 889 800 12790 889 844 13500 933 844 13500 978 978 15630 1111 1111 17760 1200
723 11360 904 814 12780 904 859 13490 949 859 13490 994 994 15620 1130 1130 17750 1220 7-3/4
793 11650 991 892 13110 991 942 13840 1041 942 13840 1090 1090 16020 1239 1239 18210 1338
371 8530 464 418 9600 464 441 10130 488 441 10130 511 511 11730 580 580 13330 627 8-5/8
441 8970 552 496 10090 552 524 10650 579 524 10650 607 607 12330 690 690 14020 745
539 9800 674 606 11020 674 640 11640 707 640 11640 741 741 13470 842 842 15310 909
631 10390 789 710 11690 789 749 12340 828 749 12340 868 868 14290 986 986 16230 1065
735 10940 919 827 12310 919 873 12990 965 873 12990 1011 1011 15040 1149 1149 17100 1241
476 8730 595 535 9820 595 565 10360 624 565 10360 654 654 12000 743 743 13640 803 9-5/8
564 9440 705 635 10620 705 670 11210 740 670 11210 776 776 12980 882 882 14750 952
640 9910 801 720 11150 801 760 11770 841 760 11770 881 881 13630 1001 1001 15490 1081
793 10720 992 893 12060 992 942 12730 1041 942 12730 1091 1091 14740 1240 1240 16760 1339
900 11200 1125 1013 12600 1125 1069 13300 1181 1069 13300 1238 1238 15410 1406 1406 17510 1519
988 11430 1236 1112 12860 1236 1174 13580 1297 1174 13580 1359 1359 15720 1544 1544 17870 1668 9-7/8
567 9160 709 638 10310 709 674 10880 744 674 10880 780 780 12600 886 886 14320 957 10-3/4
660 9520 825 743 10720 825 784 11310 866 784 11310 908 908 13100 1031 1031 14880 1114
766 10090 957 861 11350 957 909 11980 1005 909 11980 1053 1053 13870 1196 1196 15760 1292
888 10670 1110 999 12010 1110 1054 12670 1165 1054 12670 1220 1220 14680 1387 1387 16680 1498
1003 11100 1254 1128 12490 1254 1191 13180 1316 1191 13180 1379 1379 15260 1567 1567 17350 1692
673 9150 841 757 10290 841 799 10860 883 799 10860 925 925 12570 1052 1052 14290 1136 11-3/4
820 9960 1025 922 11200 1025 974 11830 1076 974 11830 1127 1127 13690 1281 1281 15560 1384
929 10370 1161 1045 11670 1161 1103 12320 1219 1103 12320 1277 1277 14260 1452 1452 16210 1568
1061 10920 1327 1194 12280 1327 1260 12970 1393 1260 12970 1459 1459 15010 1658 1658 17060 1791
1153 11210 1441 1297 12610 1441 1369 13310 1513 1369 13310 1586 1586 15410 1802 1802 17520 1946
1070 10890 1338 1204 12250 1338 1271 12930 1405 1271 12930 1472 1472 14970 1672 1672 17020 1806 11-7/8
891 9630 1114 1003 10830 1114 1058 11430 1170 1058 11430 1225 1225 13240 1392 1392 15050 1504 13-3/8
994 10060 1243 1118 11320 1243 1181 11940 1305 1181 11940 1367 1367 13830 1553 1553 15720 1678
1073 10180 1342 1208 11450 1342 1275 12090 1409 1275 12090 1476 1476 13990 1677 1677 15900 1811
1168 10520 1460 1314 11840 1460 1387 12500 1533 1387 12500 1606 1606 14470 1825 1825 16450 1971
1256 10820 1570 1413 12170 1570 1491 12850 1648 1491 12850 1727 1727 14880 1962 1962 16910 2119
1303 10930 1628 1465 12300 1628 1547 12980 1710 1547 12980 1791 1791 15030 2035 2035 17080 2198
1322 10880 1652 1487 12240 1652 1570 12920 1735 1570 12920 1817 1817 14960 2065 2065 17000 2230 13-5/8
6. HD-L connection reference minimum parting load is the ultimate strength or parting load of the connection. These values are offered for reference
only. The connection should never be subjected to loads in excess of the joint strength. Tubular designs should incorporate an appropriate design
factor.
7. Reference string length is calculated by dividing the joint strength by both the plain end weight in air and a 1.4 design factor. These values are given
for reference only and do not include other load factors such as bending, buoyancy, temperature, load dynamics, combined loads, etc.
8. HD-L connection designs are optimized for each size and weight and are, therefore, not interchangeable.
9. High Collapse-95 is not an API grade. An ultimate tensile strength of 105,000 psi was used for calculations in this table. This value is typical of the
industry, but may vary from mill to mill.
10. Performance ratings are based on nominal pipe body dimensions.
P R E M I U M C O N N E C T I O N S
A T L A S B R A D F O R D
®
HD-L Casing and Tubing Connection Data
Load Data
X-60 X-65 L-80/N-80 P-110 Q-125
Reference Reference Reference Reference Reference Reference Reference Reference Reference Reference
Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum Tensile String Minimum
Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Joint Length Parting Size
Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load Strength DF = 1.4 Load OD
1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs 1000 lbs ft 1000 ft 1000 lbs ft 1000 lbs 1000 lbs ft 1000 lbs in.
841 7440 1052 911 8060 1080 1122 9930 1402 1543 13650 1753 1753 15510 1893 14
1059 8080 1324 1148 8760 1360 1412 10780 1766 1942 14820 2207 2207 16850 2384
1139 8310 1423 1234 9000 1461 1518 11070 1898 2087 15230 2372 2372 17310 2562
1345 8800 1681 1457 9530 1726 1793 11730 2241 2466 16140 2802 2802 18330 3026
1413 8940 1766 1531 9690 1813 1884 11920 2355 2591 16390 2944 2944 18630 3179
775 6750 969 840 7310 995 1034 9000 1292 1421 12370 1615 1615 14060 1744 16
787 6790 984 853 7350 1010 1049 9040 1312 1443 12440 1640 1640 14140 1771
949 7310 1186 1028 7920 1217 1265 9740 1581 1739 13390 1976 1976 15220 2134
960 7340 1200 1040 7950 1232 1280 9790 1600 1760 13460 2000 2000 15300 2160
986 7430 1233 1068 8050 1266 1315 9910 1644 1808 13620 2054 2054 15470 2219
1120 7790 1401 1214 8440 1438 1494 10390 1867 2054 14280 2334 2334 16230 2521
1209 8030 1512 1310 8700 1552 1612 10700 2015 2217 14720 2519 2519 16720 2721
1368 8360 1710 1482 9060 1755 1824 11150 2280 2508 15330 2850 2850 17420 3078
1554 8740 1943 1684 9470 1995 2073 11650 2591 2850 16020 3238 3238 18200 3497
1903 9300 2379 2062 10080 2443 2538 12400 3172 3489 17050 3965 3965 19370 4282
867 6670 1084 939 7220 1113 1156 8890 1445 1590 12230 1807 1807 13900 1951 17-7/8
872 6660 1090 945 7220 1119 1163 8880 1454 1599 12210 1817 1817 13880 1962 18
1347 7910 1683 1459 8570 1728 1795 10540 2244 2469 14500 2805 2805 16470 3030
1450 8130 1813 1571 8810 1861 1933 10840 2417 2659 14920 3021 3021 16950 3263
859 6510 1074 931 7060 1103 1146 8690 1432 1576 11950 1791 1791 13580 1934 18-5/8
897 6610 1121 972 7170 1151 1196 8820 1495 1645 12130 1869 1869 13780 2018
989 6880 1236 1071 7450 1269 1319 9170 1648 1813 12610 2061 2061 14330 2225
1086 7140 1358 1177 7730 1394 1448 9510 1810 1991 13080 2263 2263 14870 2444
1129 7220 1411 1223 7820 1449 1505 9620 1882 2070 13240 2352 2352 15040 2540
1501 8070 1877 1626 8740 1927 2002 10760 2502 2752 14800 3128 3128 16820 3378
1592 8250 1989 1724 8940 2042 2122 11000 2653 2918 15120 3316 3316 17190 3581
950 6510 1188 1029 7050 1220 1267 8680 1584 1742 11940 1980 1980 13570 2138 20
1404 7630 1755 1521 8260 1801 1872 10170 2340 2573 13980 2924 2924 15890 3158
1659 8100 2074 1797 8780 2129 2212 10810 2765 3041 14860 3456 3456 16880 3732
2028 8700 2535 2197 9420 2602 2704 11600 3379 3717 15940 4224 4224 18110 4562
6. HD-L connection reference minimum parting load is the ultimate strength or parting load of the connection. These values are
offered for reference only. The connection should never be subjected to loads in excess of the joint strength. Tubular designs
should incorporate an appropriate design factor.
7. Reference string length is calculated by dividing the joint strength by both the plain end weight in air and a 1.4 design factor.
These values are given for reference only and do not include other load factors such as bending, buoyancy, temperature, load
dynamics, combined loads, etc.
8. HD-L connection designs are optimized for each size and weight and are, therefore, not interchangeable.
9. High Collapse-95 is not an API grade. An ultimate tensile strength of 105,000 psi was used for calculations in this table.
This value is typical of the industry, but may vary from mill to mill.
10. Performance ratings are based on nominal pipe body dimensions.