Professional Documents
Culture Documents
Novas Formulas - Safic Alcan
Novas Formulas - Safic Alcan
EXPLORER
OVERVIEW
Elevate the skincare routine of your child with this transformative milk-to-
powder body lotion, enriched with a carefully curated blend of ingredients.
Featuring Sepinov™ EMT 10 for its remarkable ability to provide a light
texture and Amaze™ XT to suspend a large amount of powders, Amaze™
Nordic Barley to give a luxurious powdery touch, Aquaxyl™ for effective
humectant properties, and Avenacare™ Eco Oat Beta Glucan to deliver
soothing benefits. Experience the softness and matte finish with a gentle
touch after application that leaves your child’s skin feeling refreshed and
pampered.
PROCESS PROPERTIES
PHASE A : Place under stirring. APPEARANCE : Off-white
PHASE B : Pre-mix then add it to phase A and stir for 10 minutes until cream.
homogeneous.
PHASE C : Slowly add to phase AB under moderate speed and stir until VISCOSITY : 13200 cPs
homogeneous. (Brookfield RVDV-I+, 5 rpm,
PHASE D : Pre-mix then add it to phase ABC and stir until homogeneous. 1 min, spindle 5).
PHASE E : Add one by one to the formula and homogenize.
Adjust pH to 5,0-5,5. pH : 5,0 - 5,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
HAIR
HAIR’POP 88,5%
of natural origin
ingredients
GP2023COSMETORIUM
HAIR MASK CONCENTRATE
023.T2 ISO 16128
OVERVIEW
This tiny lollipop allows to create 20mL of product from one small
concentrate of just 2g. Stir Hair'Pop in 20mL of boiling water and watch the
mix thicken to produce a luxurious cream. Montanov™ 82 is the star of the
show, it is a self-emulsifying base which allows the concept to emulsify with
low energy input. Amaze™ XT & Structure® XL immediately provide body and
structure to the cream while helping to stabilize the emulsion. The
combination of active ingredients, Schutzencol-NH2 and JD Jojoba Hair
Complex, gives the hair fibre a conditioning effect and protection against
heat while helping to reduce frizz. A perfect balance of performance and
sustainable benefits, with reduced water transport.
JD Jojoba Colorless Oil JOJOBA DESERT Simmondsia Chinensis Seed Oil 9,00
Emollient
A
Neossance™ Squalane APRINNOVA Squalane 8,00
ICHIMARU Octyldodecyl Myristate, Lithospermum
Shiconix Liquid MD (J) Color 4,00
PHARCOS Officinale Root Extract
Suspensive
Amaze™ XT NOURYON Dehydroxanthan Gum 5,00
agent
SCHUTZEN CARE Sodium Carboxymethyl Tamarindus Conditioning
Schutzencol-NH2 4,00
PRIVATE LIMITED Indica Seed Gum agent
Simmondsia Chinensis Seed Oil, Cocos
Nucifera Oil, Cannabis Sativa Seed Oil,
JD Jojoba Hair Complex JOJOBA DESERT Solanium Lycopersicum Seed Oil, Active 10,00
B
Helianthus Annuus Seed Oil,
Tocopherol
Decanox® MTS-50 ADM Tocopherol, Glycine Soja Oil Anti-oxidant 0,50
PROCESS PROPERTIES
PHASE A : Heat up to 70-75°C until homogeneous and melted.
PHASE B : Maintain temperature at approx. 70°C and add phase B one by one APPEARANCE : Pink lollipop.
to phase A, stirring each addition until homogeneous.
Pour the liquid into mould, add stick and allow to set. VISCOSITY : N/A.
In 20g of hot water, dissolve the lollipop and create a cream.
pH : N/A.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
FACE
Z-CLEAR 94,5%
of natural origin
ingredients
GP2023COSMETORIUM
REGENERATIVE AND GLOWING SERUM
008.Y37 ISO 16128
OVERVIEW
The honey-like texture of this transparent serum is obtained through the use
of SAFIC’ Care T A 80-400. ElfaMoist® AC Humectant helps to provide long-
lasting moisturization and MandarinClear HS brings clarity and shine from
within. C-Pep™ Nutecyl is a DNA protection peptide with an anti-glycation
activity, while C-Pep™ Defensyl is a skin strengthening peptide with anti-
inflammation properties.
PROPERTIES
PROCESS
APPEARANCE : Transparent
PHASE A : Place under stirring. serum.
PHASE B : Pre-mix then add it to phase A and stir until homogeneous.
PHASE C : Add one by one to the formula and homogenize. VISCOSITY : 336 cPs
Adjust pH to 5,0-5,5. (Brookfield RVDV-I+, 5 rpm,
1 min, spindle 2).
pH : 5,0 – 5,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
MILLENNIAL
WELLNESS
ENTHUSIAST
OVERVIEW
This short formula is very easy to make and cold processable. The stability is
ensured by SAFIC’ Care T XG 80, while FluidiFeel™ Easy, a liquid oil-in-water
emulsifier, is in charge of building the emulsion. Neossance™ Squalane will
bring nourishment to your skin, whereas ScentARC™ features an efficient
deodorant activity. The selected powder ImerCare® 400D is here to absorb
any humidity excess for a mild everyday usage.
PROCESS PROPERTIES
PHASE A : Place under stirring until dissolved then adjust pH to 5,5-6,5.
APPEARANCE : White lotion.
PHASE B : Pre-mix then add it to phase A and stir for 15 minutes until
homogeneous.
VISCOSITY : 6640 cPs
PHASE C : Add to phase AB and homogenize.
(Brookfield RVDV-I+, 5 rpm,
PHASE D : Add to phase ABC under strong stirring and stir for 10 minutes
1 min, spindle 3).
until homogeneous.
PHASE E : Add one by one to the formula and homogenize.
pH : 5,5 – 6,5.
Adjust pH to 5,5-6,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
FACE
SOLGUARD 92,8%
of natural origin
ingredients
GP2023COSMETORIUM
SUN CREAM SPF 50
026.D27 ISO 16128
OVERVIEW
This high SPF sun cream is a water-in-oil emulsion made with a cold process
thanks to the fluid emulsifier Easynov™. The combination of oils provides skin
nutrition with Neossance™ Squalane and easy application on the skin thanks to
Harmonie™ Soft Fluid, which facilitates spreading. SolAmaze™ Natural
improves water resistance, and the blend of SunBoost ATB Natural and TTO-
NJE8 allows to obtain a SPF 50 cream. Amaze™ Nordic Barley helps reduce
greasiness and Harmonie™ Sleek Ionic Gel leaves a pleasant after-feel on the
skin. Finally, the mix of active ingredients helps to protect against UV rays and
enhances skin elasticity. A perfect product for daily exposure !
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
FACE
SOLGUARD 92,8%
of natural origin
ingredients
GP2023COSMETORIUM
SUN CREAM SPF 50
026.D27 ISO 16128
OVERVIEW
This high SPF sun cream is a water-in-oil emulsion made with a cold process
thanks to the fluid emulsifier Easynov™. The combination of oils provides skin
nutrition with Neossance™ Squalane and easy application on the skin thanks to
Harmonie™ Soft Fluid, which facilitates spreading. SolAmaze™ Natural
improves water resistance, and the blend of SunBoost ATB Natural and TTO-
NJE8 allows to obtain a SPF 50 cream. Amaze™ Nordic Barley helps reduce
greasiness and Harmonie™ Sleek Ionic Gel leaves a pleasant after-feel on the
skin. Finally, the mix of active ingredients helps to protect against UV rays and
enhances skin elasticity. A perfect product for daily exposure !
PROCESS
PROPERTIES
PHASE A : Place under stirring for 5 minutes until homogeneous.
PHASE B : Add one by one to phase A while stirring between each addition
and stir for 10 minutes until homogeneous. APPEARANCE : Slightly
PHASE C : Place under stirring then adjust pH to 5,0-5,5. orange cream.
Under strong stirring, add slowly to the formula then stir for 10 minutes
until homogeneous. VISCOSITY : N/C.
PHASE D : Place in a beaker and homogenize under rotor-stator for 2
minutes at 8000rpm. Add to the formula and stir for 5 minutes under rotor- pH : N/A.
stator at 9000rpm (Silverson SL2T).
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
FACE
LUMIFUSION 94,9%
of natural origin
ingredients
GP2023COSMETORIUM
GLOWING BIPHASE SERUM
030.C4 ISO 16128
OVERVIEW
This biphase serum is a concentrate of just what is needed for a glowing skin.
Hydrovance® in order to provide long lasting moisturization, Azeclair™ for a
non-irritating sebum normalizing and whitening effect, NeoGlow® which is an
epidermal renewal booster, and Fill Oléoactif® which produces a smoothing
and tightening effect. The combination of the chosen oils will besides nourish
the skin without any greasy residue.
PROCESS PROPERTIES
PHASE A : Place under stirring and adjust pH to 5,0-5,5. APPEARANCE : Biphase
PHASE B : Place under stirring until homogeneous. serum.
Pour into containers firstly phase A then phase B.
VISCOSITY : N/A.
pH : 5,0 – 5,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
TIMELESS
VISIONARY
OVERVIEW
This luxurious serum combines a crystal-clear base with delicate pink oil
droplets, creating a visually stunning product. Infused with a potent blend of
active ingredients, it nourishes your scalp, promoting hair growth, enhancing
strength, and delivering a radiant shine.
PROCESS PROPERTIES
PHASE A : Place under stirring. APPEARANCE : Transparent gel
PHASE B : Add to phase A and stir for 15 minutes until homogeneous. with suspended pink droplets.
PHASE C : Add one by one to phase AB and homogenize.
Adjust pH to 5,0-5,5. VISCOSITY : N/C.
PHASE D : Pre-mix then add it to the formula and homogenize
manually to create the oil droplets. pH : 5,0 - 5,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
FACE
SWEET DREAMS 98,9%
of natural origin
ingredients
TK2023INCOS
360° NIGHT FACE SERUM
ISO 16128
OVERVIEW
This serum is designed to optimize skin's nighttime needs. Natrathix™ Bio
Cellulose is a nature-derived biodegradable rheology modifier with suspension
capabilities that maintains emulsion stability. Nightessence™ is a premium
lavender extract that helps skin boost essential nocturnal molecules
associated with night repair, night detox and night renewal. Happiclov
improves the production of elastin and raising up the corner of the mouth
and cheeks. MoistShield™ HA helps your skin maintain healthy and
moisturized all day while Lubrajel Marine brings rapid moisture to the skin.
PROCESS PROPERTIES
PHASE A : Place under stirring. APPEARANCE : Transparent
PHASE B : Pre-mix then add it to phase A and stir for 15 minutes until serum.
homogeneous (heat up to 45°C if necessary).
PHASE C : Add one by one to the gel and homogenize between each VISCOSITY : N/C.
addition.
Adjust pH to 5,5-6,0. pH : 5,5 – 6,0.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
FACE
DULCE NUIT 98,4%
of natural origin
ingredients
GP2023COSMETORIUM
NIGHT BALM
026.G5 ISO 16128
OVERVIEW
The texture of this intense blue night balm is obtained thanks to the
combination of Structure® XL and both Montanov™ 68 MB and 202. The
effective nourishment of the skin is brought by JD Jojoba Butter V and SAFIC’
Care E CE MB combined to Neossance™ Squalane. The powders Harmonie™
Luxe 4 Powder and ImerCare® Matte give a non greasy, silky and matte after-
feel, while the blend of actives features skin deep moisturization, reduction
of sagging and wrinkles, and increase of the skin softness.
SAFIC' Care A Blue Liquid SAFIC-ALCAN Genipa Americana Fruit Extract, Glycerin Active 0,40
Harmonie™ Luxe 4
MOMENTIVE Silica Feeling agent 3,00
Powder
Mattifying
ImerCare® Matte IMERYS Kaolin 2,00
agent
Narcissence F46791L RAVETLLAT Parfum Fragrance 0,20
SAFIC' Care is a trademark of SAFIC-ALCAN
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
FACE
DULCE NUIT 98,4%
of natural origin
ingredients
GP2023COSMETORIUM
NIGHT BALM
026.G5 ISO 16128
OVERVIEW
The texture of this intense blue night balm is obtained thanks to the
combination of Structure® XL and both Montanov™ 68 MB and 202. The
effective nourishment of the skin is brought by JD Jojoba Butter V and SAFIC’
Care E CE MB combined to Neossance™ Squalane. The powders Harmonie™
Luxe 4 Powder and ImerCare® Matte give a non greasy, silky and matte after-
feel, while the blend of actives features skin deep moisturization, reduction
of sagging and wrinkles, and increase of the skin softness.
PROCESS PROPERTIES
PHASE A : Heat up to 80°C under stirring. APPEARANCE : Thick blue
PHASE B : Pre-mix then add it to phase A and stir for 15 minutes until cream.
homogeneous.
PHASE C : Heat up to 80°C under stirring until homogeneous then add it to VISCOSITY : N/C.
phase AB under strong stirring and homogenize for 10 minutes.
Stop heating and let cool down slowly to 40°C. pH : 5,5 – 6,5.
PHASE D : Add one by one to the formula and homogenize.
Let cool down to room temperature.
Complement with water, homogenize, then adjust pH to 5,5-6,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2023
MÁS INGREDIENTES
CATÁLOGO ONLINE